Turn Fields on or off
I am wondering how to use "optional fields" and be able to turn them on or off.
Hi,
What i do is have fields out of the printable area within the supform and populate those. At the end of the field calls in the datastream I have a group call (^group) and based on the conditions for displaying fields i populate fields in the printable area.
Hope this helps.
Matt
Similar Messages
-
Check boxes that turn layers on and off
hay all
im fairly new to this part of adobe but i have a good understanding
what i need i to be able to have check boxes that turn layers on and off when the tick is shown and when it is not
i know this is possible through scripting but i dont have the ability as of yet to carry out the scripting
is someone able to write a basic script for me or help me to understand what i need
i want the script to be for when a check box is clicked (mouse up) that a layer that was oringaly turned off to be turned on (electricalplan)
once the tick is removed i need the layer to turn off again
i need to do this for mulitple layers (about 10)
so i would just use the same script for each replacing the name with the correct name.
i also need the check boxes to work together so that i can have multiple turned on at the one time (electricalplan) (sewerplan) (waterplan)Do you know how to access fields with JavaScript? I access the script way of the check box properties and selecting the actions tab.
Do you know how to set the optional value for a check box? Yes
Can more than one layer be displayed at a time? Yes
Do you want to toggle the OCG by name or element number in the OCG array? I would like to toggle by name -
In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?
Thank you so much for your reply . . . but . . . I should have shared my original script with you -- it was a little more complicated than I led you to believer. I was triggering a group of text fields to become disabled as well as gray. Below is the original script so that when the checkbox is checked, it causes several "Co" fields to be disabled and gray.
// Mouse Up script for check box
// If checked, certain fields should be disabled
var f_prefix = "Co";
// Get a reference to all of the "Co" fields
var f = getField(f_prefix);
// Reset the Co fields
resetForm([f_prefix]);
if (event.target.value === "Off") {
// Enable the Co fields
f.readonly = false;
f.fillColor = color.transparent;
} else {
// Disable the Co fields
f.readonly = true;
f.fillColor = color.gray;
To recap -- my goal is to get those gray fields to revert to transparent if the form is reset. I'm willing to create my own custom "Reset Form" button but I'm not sure I understand how that would look. Wouldn't it be quite lengthy? I think I'm having a brain freeze -- can't figure it out! -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How do I add a new number to my iMessage? I have tried resting my phone signing in and out of apple ID and turned it on an off what do it do?
It won't allow me to do it, only says I can add an email I've search all over here for ways to do it and not one way has worked.
-
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement. -
My daughters iphone4 is frozen to a blank screen with the apple on it. We have turned it on and off and it still remains on this screen. We cannot access gef phone at all. Any idea why this is happening or how to correct?
connect it to the computer/itunes you normally do.
-
Ipod Nano turns automatically on and off
Hi there,
I have the following problem.
My Ipod Nano 4GB turns always on and off. The result is, that my windows pc can't recognise it.
I have tried everything to restore the ipod, but this doesn't work as well. As soon as I push the Menu the Select Button after the Hold function nothing happens. The Ipod turns off for a short time and on again. Its always the same game...any ideas how to resolve this issue?
Thanks Beat
Dell Inspiron Windows XPHello Mo0nangel,
Welcome to Apple Discussions.
First, try updating the iPod software. Follow the steps in this article:
Updating iPod software
If the problem persists, you may have to restore your iPod:
Restoring iPod to factory settings
Unfortunately, restoring will wipe your nano clean of all songs and photos.
Gary -
I am unable to connect my Macbook air, iPhone or iPad though bluetooth. I have tried all the suggestions I have read. i.e. toggle bluetooth on and off, turn devices on and off, forget devices and then pair. I seem to be able to pair but the devices immediately go to not connected and a message appears that reads: make sure devices are turned on and in range.
Pairing the phone with the car is one thing, but paring to the computer is not generally supported. Tethering is using the cellular data access from the phone for the other devices. It is part of Personal Hotspot. If you aren't aware of what it is, then it probably is something you do not use.
As far as the car is concerned, what is not working? Does the car not see the phone, or the phone see the car, or after you start to pair something fails? If you provide more information about the problem and what you have tried to do to correct it, then we can offer some solutions. What version of the iPhone, what iOS, and what year and make of vehicle? -
Help! iPhone freezing, not responding, and turning itself on and off randomly.
Over the last few days, my iPhone has been going crazy. It all started when I turned on my phone one morning, and the ringer did not work. It told me that headphones were in when I tried to turn the volume up. Later in the day, I plugged my iPhone into my iHome. It then "died" and would not turn on. I tried everything (hard reboot, dfu mode, plugging in wall and computer, etc.) and nothing would turn it on. The next day, I tried to turn it on, and to my surprise, it loaded the "low battery" icon. i plugged it in, and it turned on. It then randomly shut off ten minutes later. It would not turn on, but it allowed me to put it into dfu mode. I downloaded the os and attempted to restore the iPhone. It shut itself off several times and took many attempts until I finally got it restored. Now, it has been turning itself on and off. I got it to turn on, and I used it until it froze. It shut itself off and reboot. It has continued to do this over and over again. I am concerned because my iPhone is out of warranty, and I live far away from anywhere where I can get it fixed. I have no idea what happened to my phone as I did not drop it or expose it to water. Is there any way to fix this? Is there a way to find what part may be broken? If not, what is the cheapest and fastest method of fixing this and is anyone else having the same problems? My phone is currently unusable because I can not turn it on (it only turns on randomly) and it freezes and shuts off a few minutes after it turns on.
Does it power back on by itself straight after turning off? If so I would probably suggest that either the charging port is faulty or maybe it is partially blocked with debris causing a possible short circuit across the pins. Try giving it a clean out first with something none metallic and might just do the trick.
-
My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it? Please tell me quickly! I was right in the middle of something!
Did you try a reset?
iPod touch User Guide (For iOS 5.1 Software) -
I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me
Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.
-
I have changed my Iphone once last year. My iphone has being playing up for the best part of 6 months. It Keeps deleting all my music of the phone. it freezes and will not allow me to turn it on or off. if i am in the middle of an app it will randomly shut it down and turn the phone off totally (even if it is charged.) It will not charge properly, it has to be in a exact position to charge and even then go's off and on. I thought this my be my charger but the charger works fine on another phone. it will not allow texts to come through properly and sometimes will not not let me ring people it just freezes and i have to turn it off and on a couple of times in order for it to work. it will not let me update apps and the silent button is not silent it still go's of on ringer.The keyboard will freeze up not allowing me to type anything. It wants me to pay £126.44 for it to be repaire when i have nothing to do with why its not working!
That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period -
My Ipad mini was in the middle of an update for the Pintrest app when the upload froze. I tried shutting down the ipad and that seemed to cause it to go into a constant reboot. Now the ipad will not turn on or shut off. Only display the apple sign. Are the any self fix remedies out there to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?
If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If not, you can't use the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(119278)
Maybe you are looking for
-
"Read Only" external hard drive?
my seagate expansion external hard drive is all of a sudden "read only". it will not let me edit any files using my macbook pro. How do you change this? I have veiwed and edited files from this external drive using my mac before and not had any probl
-
I need a download for adobe acrobat 9 pro. I have a new computer and have 2 licenses left.
for mac
-
IChat screen sharing- shared screen is green/grey pixelated
Have a strange problem trying to share the screen of my parent's MacBook Pro: request accepted, but I can't see their screen. I get a first glimpse and it works, but then it degrades to grey/green pixelated, in general, unreadable. Both computers are
-
Template page doesn't update the css file location
I've been using Dreamweaver for years; been using templates for years but can't figure why this now happening. I create a new page from a template (that I've used for years) and everything on the page (including image and other links) is fine and upd
-
Help to find a Java Text Editor PLEASE
HELP! I am in need of a program that will compile, execute and have an "autocomplete" sort of thing to help me with learning java. If there are any programs out there sort of like how Visual Basic in Visual Studio 2003-2005. But I need a program spec