Turn off a single plot of a multiple plot waveform graph

I have a multiple plot waveform graph (4 plots). I want to turn off one of the plots, say plot 2. Is this posible from the graphs property node? The property node seems to only give a reference to plot 0. I am using labview 7.
Cheers,
Wayne

I think you can use "active plot" together with "plot.visible"
property node to control which one you'd like to display. By default,
the property node refers to plot 0, but you can change to plot 1 or
other plots by changing active plot property node. You can search
"Plot" in LabVIEW Help if you'd like to know details.
Good luck,
Jian
On 18 Feb 2004 03:28:49 GMT, [email protected] (Computerman74)
wrote:
>>
>>I have a multiple plot waveform graph (4 plots). I want to turn off
>>one of the plots, say plot 2. Is this posible from the graphs
>>property node? The property node seems to only give a reference to
>>plot 0. I am using labview 7.
>>Cheers,
>>Wayne
>>
>>
>>
>>
>>
>>
>
>I would love to know if this is possible. I have been trying to figure i
t out
>myself.
>There is a way to turn a single array off and that is what I am doing for now
>untill this is possible. The plot is still there but reads zero when tunred
>off. It would be cool to have the abillty to turn off a single plot.
>I have tryed all the property nodes with no luck. The answer may be in the
>array size but I can't seem to control that either.
>For now you can use wire all 4 channels using the comparison select. Use a
>constant of 0 And wire up a swtich. When the input is false the output is zero
>in effect making the plot inactive but it still there.

Similar Messages

Turn off a single conversation?

Is there a way to disable conversation views on one particular conversation? Rules, Automator or such?
While I prefer Conversations for most of my email handling, I have a web form which returns the same sublect and sender phrase in all responses, with customer information held in the message body. Consequently all emails submitted via our website get lumped into one converstion. I would prefer these to be separate in order to track progress with each enquiry.
I'm running 10.8.3 with Mail Version 6.3 (1503).
Many thanks, Dan Chambers

I think you can use "active plot" together with "plot.visible"
property node to control which one you'd like to display. By default,
the property node refers to plot 0, but you can change to plot 1 or
other plots by changing active plot property node. You can search
"Plot" in LabVIEW Help if you'd like to know details.
Good luck,
Jian
On 18 Feb 2004 03:28:49 GMT, [email protected] (Computerman74)
wrote:
>>
>>I have a multiple plot waveform graph (4 plots). I want to turn off
>>one of the plots, say plot 2. Is this posible from the graphs
>>property node? The property node seems to only give a reference to
>>plot 0. I am using labview 7.
>>Cheers,
>>Wayne
>>
>>
>>
>>
>>
>>
>
>I would love to know if this is possible. I have been trying to figure i
t out
>myself.
>There is a way to turn a single array off and that is what I am doing for now
>untill this is possible. The plot is still there but reads zero when tunred
>off. It would be cool to have the abillty to turn off a single plot.
>I have tryed all the property nodes with no luck. The answer may be in the
>array size but I can't seem to control that either.
>For now you can use wire all 4 channels using the comparison select. Use a
>constant of 0 And wire up a swtich. When the input is false the output is zero
>in effect making the plot inactive but it still there.

How do I turn off automatic bookmark creation when combining multiple PDFs into one?

When I combine multiple PDFs into one, I need Adobe to use the CUSTOM bookmarks I created in the original PDFs. I do NOT want the additional PDF name as a bookmark in this instance. Is there a way to turn this option OFF in Acrobat Professional? I have version 9.

You can not automatically turn off this action nor can you remove the 'file_name.pdf' heading, but you could add a button or menuitem to remove the 'file_name.pdf' from the bookamarks. Yes, it is one more step to perform when combining PDFs, but is you want until you have all of the PDFs combined you only need do it once.
Removing filename bookmarks created by Acrobat by Sean Stewart
From the above article:
"With the release of Acrobat 6 came the ability to create a composite (binder) document from multiple files, (i.e. File > Create PDF > From Multiple Files.) When this is done, Acrobat automatically inserts a new top level bookmark at the start of each new file. The bookmark title will correspond to the source filename of the source file. While this level of separation can be helpful, it is counterproductive when the user wants the bookmark tree in the merged document to be continuous.
"Here's a sample JavaScript to remove the top level bookmarks from the bookmark tree. This script will look for a ".pdf" extension to decide whether to remove the bookmark."
With some additional coding you can add menu item or toolbar button.

How do you turn off a single display when running two by software?

so, i just bought a vizio 47" 1080p lcd tv and am very impressed with how good it looks connected to my imac with a dvi to hdmi cable. the problem is that sometimes i want to turn off the imac's screen because it can get distracting. any ideas?? thanks in advance.
Ray

This still is a serious issue. Has anyone heard any official statements from Apple regarding this? The iMac would be a great HTPC/computer combo, if it was possible to turn off the internal LCD.
With the current state of Mac display management, this is a real show stopper for PC-based friends looking for alternatives for PC/Vista.
iMac 24" Mac OS X (10.4.9)

Can't turn off the single tab in 23

There's a single tab and a plus sign next to it in 23. I thought we had the ability to turn that off.
While I'm here, I'll also say that for a while now it's been weird, opening a new window flashes open for a moment and then flips back to my original window. It makes multi window browsing difficult, sometimes.
Before you ask, no, I never use tabs. I detest tabs.

Well, it looks like I need to find another browser. Apparently future changes for Firefox are not being done in the best interest of the users, but in the best interest of the developers.
Had I wanted to support that attitude, I would have stayed with Internet Exploder.
Damn shame. It was a really nice product.

Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

I didn't know that it was posted three times. My computer didn't say that it posted anything.
My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

Get a waveform graph to stop plotting after a given time period

I am doing a research project looking at the effects of modifying visual feedback on a person's current force output. I have a waveform graph that plots the target force level they are trying to match (specified by me) and next to it a second plot showing their current force output (in real time). I am trying to make a condition where the current force output plot (or really the whole waveform graph) stops plotting after a 10 s time period, but can't seem to get it to work. It either plots for the whole trial, or does not plot at all. Is there a way to put a timer on a waveform graph in order to tell it to stop plotting after a specified time period?
Thanks!

Hi again,
I have tried to open the .vi you sent, but I have version 8.2 (yours is in version 8.5) and cannot open it. Is there a way for you to tave the.vi so that it can be opened with earlier versions of the program?
I have attatched my .vi to this message as well.
Attachments:
bimanual combined with metronome_conds.vi ‏174 KB

Any way to turn OFF that stupid saving of multiple copies of documents?!

I would love to know who thought it was a good idea to add this WITHOUT a way to turn it off!! So when you're in a text document (or any other kind of file that you can make changes in) you can go into the Time Machine icon on the status bar, select "Enter Time Machine" and there will be multiple versions of your document from various states auto saved so that you can go back to a previous version of your document for whatever reason. This can be a great thing, EXCEPT when you have no choice in that matter!
I DO NOT NEED a hundred copies of every single document I have on my computer because I happened to do a lot of tweeking to minor lines of text or make numerous very minor changes. And before anyone asks (because I am SO sick of answering this question twenty times a day) I DO NOT have a time machine hard drive OR Time Capsule connected to my computer in any way at all, (under normal usage. I do have a Time Machine hard drive I manually connect every few days to back up my computer, I just don't ALWAYS have it connected because it's a laptop) these multiple copies are being saved into my computer and taking up valuable hard drive space and there's no way to shut off this feature. I just called into Apple and the only thing they said was "Well it doesn't take up very much hard drive space" completely failing to see the point that I don't want it to take up ANY space because, again, I DON'T NEED A HUNDRED COPIES OF EVERY DOCUMENT IN MY COMPUTER!!!
Does anyone have any idea how to shut off this "feature" because it is utterly stupid. in System Settings -> General I checked "Ask to keep changes when closing documents" and I selected "None" in the "Show Recent Items for Documents, Apps and Servers" but it still saves multiple copies of my documents. Can anyone help me figure out how to shut this off and delete the multiple copies? Not all of us are hysterical computer users opening up random documents and slapping the keyboard with our open palms requiring the ability to go back to multiple pages of the same document, some of us actually KNOW how to open up something, make a change and save it. We don't need the computer to constantly save multiple copies of everything we do so there needs to be SOME way to shut this off. What about my final cut, Aperture, Motion and any other program that make files? Am I going to have a thousand copies of every single video I ever edit from this point on? (cause anyone who does video editing knows there will be MANY tweeks and changes to those) What about Pages, Numbers or Keynote? How much room on my hard drive is going to be wasted storing hundreds of copies of hundreds of documents every time I wanted to change a graph colour slightly, or add tax into a spreadsheet, or change a decimal point in a presentation? Adding this without a way to shut it off was the most ridiculous thing I've seen! Thanks to anyone that can help.

Actually, there are two mechanisms by which Mountain Lion does this, both of which are on by default (for laptops; only one of which is on by default for desktops).
You mention going into the Time Machine icon in the menubar? Good news - that one's easy to turn off.
To do so, you need to open Terminal.app (Applications/Utilities/Terminal.app) and copy/paste this line into the Terminal window:
sudo tmutil disablelocal
press 'return' on your keyboard and enter your Admin password. Note that the password does not echo to the screen, so type carefully.
The second mechanism is what Apple call 'Versions'. The bad news is you can't turn Versions off; the good news is it's only enabled on certain Apple apps like Preview, TextEdit, XCode, Pages, Numbers, Keynote etc. The only way to avoid Versions, therefore, is to use alternatives such as Skim (for Preview), Tincta (for TextEdit) and LibreOffice for Pages, Numbers, Keynote (alas, I don't know of an alternative for XCode).

How to turn off terminal sevices spaning of multiple monitors on the fly

I have terminal services 2012 installed with all my users accessing it through rdweb. I have span turned on so that it uses both monitors. This works great and takes care of 99% of my users.
I have a couple of users that have a requirement where they need to be ale to turn off the use of the second monitor so that they can run apps locally. Is there a way that a user can change the setting on the fly to only use a single monitor rather
then having both used by TS so that they can have their local app up as well as their TS session?
Please advise
thanks
Mike

Hi Mike,
Thank you for your posting in Windows Server Forum.
From your comment, it seems that your user are using multiple monitor with launching the RemoteApp program through a TS Web Access portal. If this is the case then sorry to inform you that there is no way for him\her to turn this functionality off for a particular
client computer from client side.
But if manually pushed RDP file then client can edit the rdp file and can solve the issue and if the user doesn’t have the enough rights then administrator can also edit his .rdp file by adding “span monitors:i:0” inside the
RDP file.
Refer for more information.
Using Terminal Services RemoteApp™ programs on multi-monitor client computers
http://blogs.msdn.com/b/rds/archive/2007/05/07/using-terminal-services-remoteapp-programs-on-multi-monitor-client-computers.aspx
Hope it helps!
Thanks,
Dharmesh

Can't turn off multiple pages per sheet

Can't turn off multiple pages per sheet - I used this option for one pdf document and now the settings are sticking. I don't want to always print 2 by 2. I was able to set a Custom Multiple page to "1 by 1" but this seems silly. How do I get the default single page printing back?

Hi dilshanzeez,
Welcome to the Support Communities!
I would suggest following the steps below in order for this issue:
Apple - Support - iPhone - iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/
Cheers,
- Judy

Can I Turn off iMessage in a group text with multiple people with different devices? There's 1 person in the group text that doesn't use iPhone anymore and they can't see any messages that are sent unless we send as regular text individually.

Is there a way to turn off iMessage for a group text that includes multiple people with different non-apple devices? When a message is sent, only the iPhone users can see the iMessage. Those without them cannot see the texts unless we send individual Text Messages or turn off iMessage completely.

now I have this and it still doesn't work.
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "OffTime" "1"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

How do I turn off multiple ichat

I use an iMac and a Macbook Pro....I switched the iMac to Lion a few months ago but just switched the laptop this weekend...now when I get a message on iChat it signals on both computers.
I used to know how to turn it of so that it doesn't go to multiple computers, just one, and now I can't figure out how to get it back to that on Lion.
Help?

Hi,
If this is an AIM Name then you could -- if it is an Off Line IM that is triggering the app launch -- stop Off Line IMs at the AIM Settings Page
(in this case "AIM" names include Apple IDs ending [email protected] and @me.com)
In addition to this you can also turn Off (Un-tick) the box that also deal with this in the iChat Preference > General Section about "When I quit iChat, Set my Status to Off Line"
This also stops Off Line IMs open the app.
NOTE
IMAgent in Lion (iChatAgent in earlier version) starts when the computer is booted.
It "Listens" at the server for IMs and if the AIM Server is set to Allow you to have them then it will open the App proper.
Both settings will stop the issue but the iChat Preferences are better if the name is an iCloud issued @me.com one
The later iCloud Issued @me.com names only work in iChat 6 or Messages beta due to a second login to me.com that then allows the AIM servers to "See" the password.
This in turn means the name cannot be used at the AIM Settings page.
Also in the iChat menu > Preferences > Accounts > Account info tab you can untick the "Enable this Account" to Log Off then Untick the Allow Multiple Logins so that only one iChat will login at any one time.
With a Jabber login it is about setting one Login to have a higher Priority than another.
I know Messages does this but I am not booted in to iChat 6 at the moment and can't remember if it also has the "Chat Settings" tab which allows you to set the priority.
8:36 PM Thursday; May 31, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Creating an Action to turn off multiple layers

I am using CS4 and I was wondering if it's possible to create an action to turn off multiple layers. We have to save a version of our files with only one layer showing, and to manually turn of the unwanted layers is getting to be a pain. Thanks for the help!

Ok, here goes. An example would be a template for a spatula that’s available in 5 different colors. Each color has a different layer (named for its respective color). Then there may be a flashlight that only has 2 layers (for its respective colors). Each product would then have a “foreground” layer & an “imprint” layer. These layers have the same names on every product. I need to keep the imprint layer turned on, but turn off every other layer.
Sorry if I’ve completely confused you! J
Michelle Lovell
Graphic Designer
Bay State Specialty Company
101 Charles Eldridge Drive
Lakeville,Ma. 02347

How do I turn off the multiple windows aero peek feature for CS5 on Windows 7?

I'm not sure if this only happens with floated windows but in Photoshop CS5, when I have multiple files open, each one of those files have their own windows open on the Windows 7 taskbar. I'd like it all to be combined as one like how it was in CS4. I searched through the preferences and couldn't find anything related to this problem. Does anybody know how I can turn this off?

function(){return A.apply(null,[this].concat($A(arguments)))}
JKSeidel wrote:
When I first loaded Win7, I went over the GUI changes from XP (I passed on ever using Vista) carefully.
Out of curiosity, how long ago was that? I'm guessing not long.
That you chose not to use Vista is also part of the problem. Many things in Windows 7's UI are evolved from Vista's changes. You're viewing Windows 7 from the perspective of one who has changed suddenly from XP, and that is no doubt a shock.
You also expect it to be a system that facilitates work, and that's a fundamental problem. Windows is now first and foremost an entertainment vehicle for the masses. Those of us wanting to use it for real work have to work at it to tune it up for that task.
If you sense the resource usage of Windows 7 Aero then quite possibly your computer isn't up to the task. When run with a good video interface Aero becomes smooth and instantly responsive, and that (with a few tweaks besides) actually makes using Windows quite a pleasure. It definitely can be made to get out of the way and lets you concentrate on the work.
The basic trouble is, Microsoft doesn't make changing to any new version of their operating system an easy task...
As a career computer/software engineer, I chose to understand Windows 7 from the inside-out (for the first time ever I ran the beta versions in a virtual machine, to get used to it). I've had to find dozens of tweaks and turn off a number of things that shouldn't be running.
AFTER ALL THAT I can say Windows 7 is a dynamite system, that often outperforms XP (both in compute power and in UI performance). And it's more stable than any version of Windows to date.
I can only encourage you to stay with it. It may take a year or more, but it really does grow on you. On my main Windows 7 workstation I run virtual machines with XP and Vista almost daily for development testing, so I haven't forgotten their UIs, and I sure would never want to go back!
-Noel

Turn off a single plot of a multiple plot waveform graph

Similar Messages

Maybe you are looking for