Turn off Optimization in HotSpot?

I wrote a little Java application which captures images - it works great under JDK 1.2, but the performance is really uneven using JDK 1.3.
Could this be caused by Hotspot?
Is there a way to turn off optimization in Hotspot?
I don't necessarily want a purely interpreted program, but it needs to run consistantly. I think I still need some JIT for adequate performance.
Thanks for the help.
Drew

-Xint makes Java run in interpreted-only mode. -classic switches off HotSpot completely (uses the Java 1.2 VM). Please read this: http://java.sun.com/j2se/1.3/docs/tooldocs/win32/java.html
Jesper

Similar Messages

Turning off optimization in iPhoto

Is there a way to turn off optimization in iPhoto? ~ I want to upload a series of full-sized images to my iPhone.

Or ask in the iPhone forum.
But the answer is no. Instead, look at the various apps that do file transfer to the iPhone (FileMagnet, AirSharing) and use them to move the images. I think there is may also be an app Portfolio.
http://iphoneapplicationlist.com/2009/02/26/portfolio/

Is it possible to turn off the USB hotspot and keep WIFI and BT only on?

I use WiFi or BT tethering almost every day.
When I arrive at home, I plug the phone in the dock to charge/sync but the phone automaticaly turns on the hotspot option.
Turning on/off the hotspot option every day is a pain.
Is there a way to shut down the USB tethering and keep WIFI and BT tethering only ?
Message was edited by: Karyboue

jasonheiss wrote:
Be sure to click Apply after removing the interface. That confused me for a few minutes.
2 years later, I doubt the original poster is still worrying about it....

Can you turn off optimization while splitting events?

I want to move all my many thousands of iPhoto clips down to intermix with my other clips stored on an external drive. All seemed well, I drug them down like the apple tech told me to, but they appeared in a single event, which is bad enough, and the sound is missing, which also *****, but I've found that if I split the EVENTS back into their original date periods the sound comes back. (And I have to do that anyway so they will sort/intermix properly in the event area anyway which was my original goal.)
The PROBLEM is that every time I choose "split event before clip", it takes a minute or so for imovie to OPTIMIZE MOVIES after splitting the event. Since I'm really not planning on doing anything other than splitting these **** events for the next month or so, is there any way to turn that feature off for a while?
For that matter is there any way to speed this process up? Any way at all? All the movies are still in iPhoto, if there was a better way to do it I would. I would just export them and import them directly, but then I lose all the original dates (Though I'm starting to wonder if that would be faster.) I would be willing to buy external software if that would help.
And yes, I realize I could just drag them all down event by event, but that would take longer, because I believe I have to first create an event to drag them into. If that is incorrect let me know. But at least on my computer, creating the event takes just as long as splitting the event, so this method saves me half the time.
It seems like there has got to be a better way to do this.
Or is there any way to split at multiple points?

Flip the mute switch.

How do I turn off iPad personal hotspot.

SSince update to iOS 8 wifi displays my phone as personal hotspot, how do I disable this? Or do not have to hear the iPad ring?

TellMetr wrote:
SSince update to iOS 8 wifi displays my phone as personal hotspot
You turn this off on the phone. Settings>Personal Hotspot>Off.
Or do not have to hear the iPad ring?
On the iPhone - Settings>FaceTime>iPhone Cellular Calls>Off. You can also do this on the iPad.

Can't turn off optimizations

I have a scene graph that contains hundreds of Primitive spheres. I'm trying to set them different colours but the renderer has different ideads. I have set the capability to Primitive.Geometry_not_shared but it still seems to be sharing the Materail Colors between the objects. The colors are the foundations to the program and I'd hate to think that I have done all this programming in vain. Can anyone help?

Maybe i did not get your problem right, but why are you not using a new material object for each of the spheres, e.g.:
Material m = new Material();
        m.setLightingEnable(true);
        m.setDiffuseColor(new javax.vecmath.Color3f(baseColor));
        m.setAmbientColor(new javax.vecmath.Color3f(baseColor));

How to get in touch with a rep?/Turn off wifi hotspot

Hello, i am not seeing an option to get in touch with a Comcast Rep.I understand that it is late, but i do not see an option to start a live chat, or send an email.Also all of my attempts at calling have ended with the line being disconnected while being transfered to an agent.Being such a big comapny, its a little fustrating that i cant get ahold of anyone. Anyway, sorry for the rant, maybe someone here can help faster then someone who works for the company. I am having horrible connection problems, and i just recently found out im providing internet to the public. I have followed the steps to turn off the xfinity hotspot, however i do not have a link to "Manage Xfinity WiFI" under service adress. My Model number is SMCD3GNV

Bruce, thank you for the link.
What used be under the service address in Users & Preferences was moved to the Services/Internet.
It must be a recent change because the date of the help topic you linked to is June 22, 2015.
I cannot find the help topic which has instructions to disable it under Users & Preferences (which I had seen in the past) so it must have been pulled AFTER Nathanma123 saw it. It was still there in early June because I saw it there when helping someone at Bleeping Computer.
I did think it was odd that the feature was under Users & Preferences. Services/Internet is a better place for it.

Cannot turn off personal hotspot

iPad Air running latest iOS version.
iPhone 6 running latest iOS version.
Personal Hotspot is turned off on my iPhone. My iPad can see its Personal Hotspot as available to connect to.
I tap the entry for the iPhone Personal Hotspot, the iPad connects to it ... even though it is not turned on.
My iPhone confirms this by the telltale blue strip appearing at the top of the screen indicating someone has connected to the phone ...
I check the Personal Hotspot section within iOS and sure enough it has turned itself on.
I turn off the Personal Hotspot again ...
The iPad then shows an alert to indicate its connection has been terminated.
But shortly after, the iPhone Personal Hotspot (which I turned OFF) entry appears in the wireless connection list on the iPad and I can tell it to connect again. I click the entry, and the iPad connects again via Personal Hotspot to my iPhone.
I Have told he iPad to 'forget this device' and it still connects with no issues whatsoever ...
Also, the iPad is able to connect to my iPhone without giving the password that I have set up!!
HELP!
This is a security problem surely?

Criticalimpulse wrote:
I was having the same issue after updating iOS in both devices, iPad Air and iPhone 5s my iPad could see my iphone hotspot even tho it was shut off. After reading everyone's reply all I'd did was sign out of iCloud on the iPad and no more issues.
The problem with this solution is you lose all of the benefits of being in the iCloud connection space, which are many and getting to be even more.
The reported problem is that you see a hotspot connection available on your iCloud devices. No one else sees it and it really isn't live until you connect to it. In the old days (before this release) only advanced users could take advantage of a Hotspot. Now they have done away with the concept and your devices can see each other and if you need a wifi connection for one through another's LTE you can do it automatically by just selecting it from the receiving device.
Bottomline, now the fact that you can see a potential hotspot connection with one your devices (and no one else can see it) doesn't seem to be a problem to me. Once I got used to see it in the bottom part of the list (the not yet active part), I like it. It's easier to start up a hotspot and is only confusing to those of us who used to go through all of he steps previously. New users to iOS don't even have to know what a hotspot is and they can connect their devices. That's why they switched.

AIPORT GOT TURNED OFF BY xfinity wifi - how do i turn it back on?

I've had comcast infinity for a long time and it worked with my airport base station.l this week comcast 'offered' creating a wifi hotspot. I mistakenly let it be created and now my airport connection cannot even be found. doesn't show up and I am using an unsecured wifi site in my own house. HELP please.
equip: macbook pro - 13 inch retina mavericks
my old mbp using leopard still shows airport and connects to it.

I'd start by looking for information on how to turn off the Comcast hotspot.

Turn off page thumbnails using javascript

How do I turn off page thumbnails and preflight using javascript? Also is there anything else I can turn off/optimize to speed up page creation etc?

Hi
you try this:
app.activeDocument.windows[0].zoomPercentage = 50;
thx
csm_phil

How can I turn off the Gloss Optimizer on my Espon when printing PDFs?

I am using a Mac Pro with Mountain Lion and the Adobe CS6 package that came with Adobe Acrobat X (version 10.1.3).
As with the other programs in CS6, when I print I cannot turn off the Gloss Optimizer. I used one cartridge in on day. Expensive to say the least.
I checked out the color profiles for the printer and Adobe does not have a "SPR1900 Plain Paper / Bright White Paper" to select. They seem to have everyting Epson offers but that. They do have something called "SPR1900 Standard". Don't know what that means and it does not solve the problem. I suspect the issue is that all the choices override my printer commands. Has anyone else had this issue and, if so, have you arrived at any solution.
I called Adobe about this and they are aware of the issue. They cannot resolve it on the fly. I have to wait for them to address it and then for it be included in a major release (not an update). Very frustrating. Any help would be appreciated. Thank you.

Hi,
You may not have a wireless network adapter.
If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
Jaco
Errare humanum est.

How to turn off iTunes photo "optimization"???

I have been pulling my hair out trying to find a work around for this problem. I am trying to sync several hundred photos to my iPhone. I have the 32GB model so space is no issue. The problem is that when I sync the pictures to my iPhone through iTunes, iTunes "optimizes" the photos. The optimization process reduces the resolution of the photos significantly, the photos were originally taken with my iPhone's camera! so they were not very high resolution to begin with! Why does iTunes work this way and how do I turn the photo optimizing feature off?? I would really like medium or high quality images on my iPhone which I can zoom in on. I really do not like the low quality images iTunes is forcing me to put on my iPhone. There must be an option to turn off this terrible feature...

The iPhone never was intended as a photo storage device. There are hard drives and thumb drives for that. You aren't losing your original quality photos, they are on your computer in iPhoto, Aperture, etc.
Personally, I prefer the ability of the iPhone to be able to show my hundreds of photos (to which I have the original high-res originals at home in iPhoto) on the go, which is the intent of the iPhone, rather than to just show the thumbnail of a few high-res photos I may have taken with my iPhone or elsewhere. This is how the iPhone was designed.
You have 3 things you can do:
1) feedback to http://www.apple.com/feedback/iPhone.html
2) research the features of electronic devices prior to future purchases
3) get a different phone that better meets your needs.

My hotspot is turned off. Other household iphone can turn my hotspot on and don't get asked for a password. Any way to change this?

I have iphone 6, my son has iphone 5c. My hotspot is turned off. My son gets option to tether to my hotspot, if he clicks on that then it remotely turns my hotspot on! Can other iphone users do the same? Worried about other people using all my data.

The password for the hotspot will remembered by the devices that have connected to your hotspot.
If you can't reset the network settings on those devices, which would also delete all network passwords on those, just chafe the hotspot password on your phone in Settings/Hotspot/Wi-Fi password.

I have an iPhone 5S and I can't turn off the hotspot.

I have an iPhone 5S with IOS 8.1.1 and I can't turn off the hotspot. The button says it is off but it still shows up in the available wifi list on my other devices. I tried turning it to on and back off. I tried resetting it. Any ideas??

I believe that's because your other devices remember your Hotspot for quick future use. Just tap on the blue circled 'i' next to your Hotspot name in the other device and tap 'Forget This Network'. This should solve it.

Does Instant Hotspot turn off automatically?

IOW, when the units using the hotspot are finished with doing whatever, does the Instant Hotspot turn off by itself so that cell data isn't continuing to be used?

OK, being the impatient type of person I am, I just tested some scenarios.
Went to iPad, changed wifi to Instant Hotspot and it turned on the hotspot on the phone. Disconnected from the personal hotspot on the iPad and waited less than 5 minutes and the phone went back to my home wifi as I hoped it would.
Then cranked up the iPad again, picked the Personal Hotspot, did a quick web crawl then put the iPad to sleep. A couple minutes later the iPhone was back to the in house wifi. Woke up the iPad and the wifi had gone back to the in house wifi just as I'd hoped.

Turn off Optimization in HotSpot?

Similar Messages

Maybe you are looking for