Turn off tablet control of brush opacity

Hi, I have a Wacom Intuos3 tablet that I am using with Photoshop CS5 Extended. I want to have a brush that changes size (shape dynamics) with pen pressure, but I want opacity to stay at a solid 100%.
It looks like pen opacity is controlled under "Transfer", so I'll try to disable it, but as soon as I start drawing, the transfer settings reverts back on and pen opacity is enabled again. How do I turn that off and keep it off?
I used to be able to do this with Photoshop CS4 but I don't really understand this new CS5 brush interface.

The usual cause of this in cs5 is having the Override brush opacity enabled.
There two buttons on the tool options bar, one overrides opacity and the other
oveverrides size.
Try clicking on the Override brush opacity to disable and see if that makes
a difference.
MTSTUNER

Similar Messages

How to turn off voice control with iPhone 5s with iOS 8

I Dropped my phone in the tub, I have an otterbox on it but it didn't do the phone any good :/. I dried it off and the home button started acting up. And now it doesnt work when i hit it. But the Touch ID still works. However randomly voice control will pop up and call random people when i don't even touch it. I tried going into restrictions > Siri and turning it off I turned off voice

Otterbox cases are not waterproof and are not advertised to be so. For that, you need a Lifeproof case or similar.
If you turn off Siri, Voice Control is enabled. The only way to turn off Voice Control is to turn Siri back on. Your phone has been damaged by immersion in liquid and may never work properly again. Sorry.

User Account Can't access internet once parental controls used, even after turning off parental controls

I set up a user account for my child. I am able to access the internet through firefox. I then set up parental controls and can NOT access the internet anymore. I turn off parental controls for that user account. I still can not access the internet from that account.

Parental controls is a part of the Windows operating system and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

Can't turn off motion control

Hello everyone,
First time on here. Just got a u410. Anyway I downloaded adobe reader. When I opened it I got a message that said motion control can be enabled for this application. So curiously, I turned it on. But now I don't know how to turn it off. Everyone time I open adobe reader, the camera automatically turns off. How can I turn off motion control?

anderslq wrote:
Seriously?! There has to be a simple way to switch off the quite annoying Lenovo Motion Control...?
I have now been using it for a while, but in general iit is more of a nuissance - any movement in front of the screen when presenting makes the slideshow jump ahead or back.
If I click the little message in the top right corner announciing that motion control is activated (it says something like "click here to configure") absolutely nothing happens. If I click the Motion Control icon (on the Start page) the computer switches back to the last program used, no matter what it was, and then nothing else happens...
What is the right way to really switch this function on/off...???
Sorry, but my suggestion does not apply to your situation. I responded to the original post. I have not read your problem when I made the suggestion. You should know that. Maybe you should try openning a different thread, not bump the orginal one.

Turn off the path in brush mode

How can you turn off the path in brush mode so that you may draw free hand with a cintiq? I hate how the paths keep deleting lines. Thanks guys..

If you double click on the Paintbrush Tool, you can uncheck Keep Selected and/or adjust the Within ... Pixels slider in the options window.

IPod nano version 6: random turn off, volume controls don't work, does not turn off, skip does not work. Two years old! Next version of nano has no clip and same amount of storage. I do not want to give up my version 6!

iPod nano version 6: random turn off, volume controls don't work, does not turn off, skip does not work. Two years old! Next version of nano has no clip and same amount of storage. I do not want to give up my version 6!

Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

How can I turn off sound controll whele on the Satellite A200

How can I turn off the external sound controll in front of laptop - the wheel? It does not work, sound volume is permanently muted.
OS: MS Windows XP
Thanks

Thank you Jaba,
it is Toshiba Satellite A200 Series. Drivers, its configuration and configuration of operating system is OK. The wheel is mechanical damaged, so that is the point. I have to disable its function in operating system. But where can I disable it? I have tried to uninstall Toshiba utilities (controls, hotkeys), reinstall drivers. I have tried to find an option in BIOS, there was no one.
btw: I am a linux administrator, but I have advanced knowledge of windows systems so you can be short.

How do I turn off voice control for ipod features?

HI,
I'm having an issue with my iphone 4, when using with a 3rd party set of earbud headphones that include an inline microphone, wind and ambient noise cause the voice control to go haywaire. I've found the option to turn off voice dialing for the phone, but can't find a way to shut this off in iPod mode. Help? Please? It's driving me crazy...

I have the same problem with my ipod touch 4th generation. It only started a few days ago after I finally updated it ios 6.1.6; I never knew Voice Control existed on my ipod before then.
It has not happened when I had headphones plugged in, only when it was sitting by itself on a table and I wasn't touching it.
The first time it happened, it was sitting on my night table at 4am while I was sleeping. The second time it happened, it was sitting on my desk at work while I was quietly typing; I had to apologize to my coworkers while I tried to figure out how to make it stop. Just now it happened again, sitting on my kitchen counter while I was on the other side of the room. It has happened about four more times while I was sitting here at the computer researching the problem. I even checked to make sure the case (Otterbox) wasn't pressing on the Home button, and it's not.
I HATE IT!!!!!! It makes me so angry! If I can't figure out a way to make it stop, I'm going to have to stop using it altogether. Is that what you want, Apple? And no, I won't upgrade and buy a newer model; I'll get an Android version.

Users turning off observe/control?

I think I may hit the ceiling in a few minutes. I've been posting how I haven't been able to connect to any remote clients that I've upgraded to 3.1 or higher. However, all of a sudden, I'm able to connect to one machine that has 3.2.1 on it. I was shipped one of the machines from a user having problems, and lo and behold, observe/control was turned off!!!!!!
Is there a way to remotely turn that on? If this is the case and I've been yelling about Apple this whole time and wasted about 2 months, I'm going to be slightly angry.....

If you can send a UNIX command successfully or remotely login to the system via Terminal, you should be able to turn Observe and Control on via the kickstart command:
http://docs.info.apple.com/article.html?artnum=108030

Problems with turning off Parental Control

For research, I turned on Parental Controls. Since I don't have kids, I turned them off again.
However, I still get blocked on some web pages, regardless of browser.
I already killed the parental control daemon.
How can I remove the limitations of the parental controls completely?

Update:
I found that it only affects a handful of URLs I tried in Safari and Firefox with the controls turned on and immediately after turning off again; Opera seems to not have any restrictions (I never tried Opera during all of this).
Where is the block saved? What do I have to delete to remove the block? For now, I can access everything in Opera, but I like Firefox more.

Turn Off A Control?

I am writing a VI that runs on the PC and controls a NXT robot. I have a boolean control on the front panel that turns on the motors. If the touch sensor detects a hit, I would like to turn off the motors by turning off the boolean motor control.
I have not discovered a way to do this, since there are no inputs for boolean controls. Is there a way to do this that I haven't discovered? Or is it impossible?
Thanks...
Michael Trigoboff

It is documented ofcourse. But there is so much documentation that it takes months to just read it.
Jim Kring wrote a nice introduction 5cm thick at least and weghing 1610 gram.
Is the documentation available to me somehow? I'd love to have all 1610 grams of it.
But
when you use LabVIEW professionally I advise you to follow a course
instead. And try to follow the nuggets from Darren and the rest of the
incrowd to understand better
http://zone.ni.com/devzone/cda/tut/p/id/5720 shows an overview of the first nuggets.
Will do, and thanks again...
Michael Trigoboff

How to turn off remote control on mac 10.8.4

I need to turn off remote access? Where do I do this ?

What remote access are you using?
http://support.apple.com/kb/ht2577

T61 Wireless Repeatedly Turns Off Windows Control

Upgraded firmware in my wireless router, and now my T61 can't connect wirelessly.
Wireless Network Connection is properly identified, Signal Strength is Excellent, speed is 54 Mbps. Status is Limited or no connectivity.
Something keeps turning off my Wireless Zero Configuration Service. EIf I start it manually, and check off "Use Windoes to configure my wireless network setting,", I get wireless access back. But those actions get reversed when I reboot the computer.
What can be causing this?
In case it's relevant, the Lenovo PC Doctor 5 wireless troubleshooting test fails on the TCP/IP Network Connection Test, saying "Cannot Run". That happens even if I've gotten my wireless connection working.

Hello,
Have you tried upgrading the ThinkPad T61's wireless drivers as well? If so, did that make any difference?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How can i turn off voice control on iphone 5s

hello
my home button is not working well. so its stuck on voice control... i would like to turn it off completely, siri and the phone voice control

Hello there, Yelis2591.
The following Knowledge Base article offers up some great steps for troubleshooting your home button:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
The Home button is slow to respond
If the Home button is slow to respond when exiting one application, try another application.
If the issue exists only in certain applications, try removing and reinstalling those applications. Get further assistance in installing and troubleshooting applications.
If the issue continues, Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
If the issue is still happening, try to restore the iPhone.
Seek service is the issue is still occurring.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to turn off Smart Control compressor in GB10

Does anyone know how to completely defeat the smart control compressor in GB10? The EQ panel has an on/off property in the inspector, but the compressor always seems to be enabled. I need to share out a lead vocal track with compression or effects so that I can take it to another studio for treatment and processing. Thanks.

Edgar, thanks very much for all the info.
It turns out my issue is related to importing an older GB project into GB10. Existing tracks have truncated compressor controls (with no on/off switch). I suppose Apple has a good reason for doing that, but right off the top of my head, I cannot think of one.
Anyway, the ultimate solution was to create a new blank wave track and drag the old regions into it. Easy peasy, but only because it was a vocal wave region that didn't involve amp sims. Fixing things is much more labor intensive for my guitar tracks, so much so that it's probably easier to just rerecord those parts with entirely new strip settings. I've found the new and old Fender-ish amp sims to be so utterly differnt that the old tracks sound like doo doo if I just switch sims. Gain, level, sonic characteristic, everything is vastly different. But if I use the old amp sims, the Smart Controls are anything but "smart."

Turn off tablet control of brush opacity

Similar Messages

Maybe you are looking for