Turning off Internet Explorer 7 Standards Mode via registry? Help!

Hi all
In his infinite wisdom, my predecessor rolled out a few PCs with Windows 7 Home premium. There are a few scattered around at various sites of ours that connect back to Central office via VPN. Due to the functions they preform these PCs cant be domained and
just use local accounts.
We have a new web based finance system, that does not run correctly in Internet Explorer 7 Standards Mode - for the rest of the company I have turned it off via a GPO, but for these PCs (that dont even have local GP) I'm struggling to find the correct registry
entry to disable Internet Explorer 7 Standards Mode! Help!
The PCs are Windows & Home 32bit - I have searched and search and found nothing. Cheers guys

Hi StevoHX,
Thanks for posting in TechNet Forum.
I will do more test on this requirement and will let you know the result as soon as possible.
I wonder if we don't disable the Internet Explorer 7 Standards Mode, could you open the web based finance system？
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

    hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

    hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

  • Unable to save PDF - Internet Explorer Protected Mode "A file error has occurred"

    Hi,
    I hope you can all assist! Here's the detail:
    Reader XI (11.0.06) and deployed as physical installation (.msi)
    Windows 7 x64 Enterprise
    Internet Explorer 8 & 9
    Opening PDF's from HTTP & HTTPS locations
    Users are unable to save the PDF file to their chosen location (network share or local directory) "A file error has occurred".
    When the Internet Explorer Protected Mode is switched off, users are able to save the file to their chosen location.
    Is this is specific functionality of IE Protected Mode whereby the ActiveX control is being restricted.
    Is this due to Enhanced security within the Adobe Reader 11.0.06 application?
    Our current Reader version (9.3.0) is able to save files from unprotected locations, so this is creates a problem justify upgrading.
    Do anyone have any suggestions?
    Look forward to any assistance or suggestions.
    Thanks,
    Simon.

    Hi Simon,
    How are you saving the file (right click or from File menu)?  Does the problem happen with any PDF file?  Does the problem go away if  you turn "Enable Protected Mode at startup" from Reader (Preferences > Security (Enhanced)?

  • Turn Off Internet

    I am looking for an app or even settings that will turn off Internet access except via Wi-Fi .
    Finding even if i am connected via Wi-Fi some applications ask for Internet access and saying Yes presuming they are going to use the Wi Fi connection  they then proceed to connect via  network providers internet charged connection . 
    Simple Internet via Network OFF .
    Network Internet connection required then i have to actually switch it on .
      jjegan

    There probably is not. +Settings > General > Network > Enable 3G > Off+ will just turn off 3G - meaning the phone will use EDGE or GPRS instead of the faster network, but it will still use data. Not sure that you can delete the Cellular Data Network settings, either, as those are not accessible on a locked phone like mine. call your carrier and have them deactivate your data plan. But that defeats one of the main reasons for having an iPhone, IMO.

  • How do I turn off internet recovery in Mountain Lion?

    I need to turn off internet recovery in Mountain Lion. The reason is if you use internet recovery you can access safari and although parental controls are on, internet is unmonitored. I want to ensure my MBP is secure from the darker parts of the internet and thus I don't want there to be any unmonitored internet access.
    Is there a way to turn off internet recovery or is it hardwired into Mounatin Lion?
    Seb

    Open firmware password may be the way to do it.   Mind you, a clever enough person can bypass that, but it takes more effort than it usually is worth.  Put a hidden camera in the room if you are worried something will happen, and backup the data only when you are present.  And if you forget the open firmware password, you may have locked yourself out for good anyway.

  • Can't turn off internet sharing

    My brand new MacBook Pro has been working perfectly--until out of the blue internet sharing turns on everytime I boot up. I have never used internet sharing and certainly don't want to now, because I can't use my wireless network with it on.
    My internet connection has been working flawlessly and I made no changes whatsoever (it simply was on once after booting up, and now is on forever), but I CAN'T turn off internet sharing. In my internet sharing preference panel it says that internet sharing is already off, but my airport menu bar says it is on. This is becoming most irritating. Any suggestions?
    MacBook Pro   Mac OS X (10.4.8)   2 day old computer

    Are you sure this is not just a neighbour's wireless network?

  • How do I turn off the "dynamic trim mode"?

    How do I turn off the "dynamic trim mode"? I hate it, hate it, hate it. For those that love it... great. I am glad you do, keep working. I tried to adapt, but it just isn't worth the hassle. For me, I want it gone forever. Too much zooming, no simple ripple delete.
    Again, if you love it, great! I want to turn it off, how about me adobe? I am so ready to move back to CS5.

    PierreLouisBeranek wrote:
    Hi Jim,
    You're right. What I wrote isn't the actual problem. My mistake.
    The real problem is this:
    If I select an edit point with the Selection Tool ('V'), for example, and then change to the Rolling Edit Tool, the cursor doesn't change while hovering over the currently selected edit point, and the only way to use the Rolling Edit Tool on the selected edit point is to first deselect it and then reselect it again. The same problem occurs vice versa.
    If you toggle the trim type to "Roll" after selecting the edit with a keyboard shortcut this is not necessary. It might take some getting used to, but see if that works for you.
    PierreLouisBeranek wrote:
    If I select an edit point's left side (outgoing clip) with the Selection Tool, but then want to select the right side at that same edit point (incoming clip), dragging the cursor over to the right side of the edit point has no effect (i.e. the cursor stubbornly remains a left-pointing arrow for editing the prior clip's out point).  The only way to select the right side of the edit point to first deselect the left side (i.e. click on any clip) and then select the right side.  The same problem occurs vice versa.
    Again, toggle the trim type with a keyboard shortcut (Shift-T is for Windows, Ctrl-T is for Mac), then your tool will appear and behave as expected.
    It sounds like you wish to have the Final Cut Pro behavior, where the cursor that is chosen will appear over the edit, regardless of how the edit is selected. Note that here you must click to select the edit with the proper trim type before you drag the tool.
    In Premiere Pro, the cursor will not change to the selected tool unless the edit is selected with the corresponding trim type. If you want to click and drag the trim tools as you did with Final Cut Pro, yes, you must deselect the selected edit point first.
    Anyone can send me a PM at any time. I'm your representative to the Premiere Pro team.

  • I turned off Internet access, using airport timed access control.  Now, I can't turn it back on.  The base station can't be found.  Please help.

    I turned off Internet access, using airport timed access control.  Now, I can't turn it back on.  The base station can't be found.  Please help.

    Can you take a look at this one and offer your opinion please?
    https://discussions.apple.com/message/21889032#21889032

  • Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection

    Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection.

    The only ways in iOS would be to stop using push mail or timed fetch mail and switch the account(s) to manual fetch.  That way, you only get mail when you open the mail app. to use it.
    Or, you could selectively disable wifi and cellular data - voice calls and SMS texts would still come through then.
    Other than that, I cannot think of a way to selectively disable email by itself.

  • TS4429 my ne keep displaying no signal no matter where i go. my phone just displays no signal. Iv tryed turning off, removing sim .airplaine mode.,allthe usual tricks still nothing.

    my ne keep displaying no signal no matter where i go. my phone just displays no signal. Iv tryed turning off, removing sim .airplaine mode.,allthe usual tricks still nothing.

    my ne keep displaying no signal no matter where i go. my phone just displays no signal. Iv tryed turning off, removing sim .airplaine mode.,allthe usual tricks still nothing.

  • I, too, keeping getting a pop up when in Safari that is from "tap-security.rubicon....  I saw the suggestion to turn off all extensions, but this didn't help.  What next can be done?

    I read that several other people have been bothered by a drop down message talking about a bad certificate and perhaps non secure site when working in Safari.  I, too, keeping getting this pop up when in Safari that is from "tap-security.rubicon....  I saw the suggestion to turn off all extensions, but this didn't help.  What next can be done?

    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)

  • When I move mouse on Firefox-History (it must show context menu) he just begins to think, and after ~20 seconds he looks like I haven't pressed any buttons! I tried to turn off all addons but it doesn't help. Also he "thinks" everytime when gets download

    when I move mouse on Firefox-History (it must show context menu) he just begins to think, and after ~20 seconds he looks like I haven't pressed any buttons! I tried to turn off all addons but it doesn't help. Also he "thinks" everytime when he gets new downloading and sometimes on pushing Bookmarks

    Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • HT2978 how do you turn off genius for apps ios 6 pleasssss help my appstore keeps on crashing

    how do you turn off genius for apps ios 6 pleasssss help my appstore keeps on crashing

    What you are saying is true but it will not always work. The aap store is dead. Wen I go to the fret urged page I see a white screen. I should be able to scroll down to the bottom and select View Apple ID but can't. This is on my wife's iPad and she thought after she upgraded to iOS 6.0 when it prompted her to turn on Genius that's what caused the trouble and she wanted to turn off Genius. NO CAN DO in App Store.
    To turn off Genius I had to go to Settings > iTunes & App Stores > Apple ID xxxxx then click view Apple ID then I can turn Genius off and on.
    But the did not fix the problem with the App Store which is still dead.

  • NONE of the web pages load properly. If I hit "Ctrl + F5" it will fix THAT PAGE ONLY. I have to do this to EVERY SINGLE page I try to load. This ONLY happens with FIREFOX. Internet Explorer works fine. PLEASE HELP! Thanks.

    NONE of the web pages load properly. If I hit "Ctrl + F5" it will fix THAT PAGE ONLY. I have to do this to EVERY SINGLE page I try to load. This ONLY happens with FIREFOX. Internet Explorer works fine. PLEASE HELP! Thanks.

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Virus Software Turned Off & Internet Connection Problem

    My laptop has been slowing down, but it was fine otherwise.   A few days ago, I turned it on and received warning messages from the HP Action Center and HP Support Center that my Kaspersky Anti-Virus and Anti-Spyware software was no longer on.  I never turned them off and they've been working fine for 6 months or so, so it's not like I just installed them recently.  Since the problem started, I've tried several times to turn them back on, but the computer just doesn't do anything.  It asks if I trust Kaspersky and want to run the app, I click on yes, and then nothing happens.  I've also tried to run the software by using the Kaspersky desktop icon, but that won't do anything either.   The same time that this problem occurred, I also lost my ability to fully connect to the internet (DSL connection).  I can get to the Firefox homepage, but whenever I try to get to any other website, even simple ones like Google, nothing happens.  I've tried everything I can think of to fix these problems (except for using the refresh/restore option, which I'd like to avoid if possible).  I've power-cycled the modem, run diagnostics and network checks, and I installed MalwareBytes from a USB drive and ran that scan, but it didn't find any problems.  At the same time that these other problems began, I did see a brief notice that said that a Windows update failed, but I don't know if that caused these other issues or if it just failed because the other issues prevented the update.  Kaspersky's tech support has not been very helpful.  Does anyone have any suggestions?  Keep in mind that I can't access the internet from the affected computer, so I can't download anything directly to it.  Thanks in advance for your help.

    Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I came across your post about the multiple issues that you are having, and wanted to assist you! Have you tried to uninstall and reinstall your Anti-Virus and Spyware program?  You can try performing a System Recovery.  If that does not work, you may also consider a Hard Reset.  Do you have a wired, or wireless internet connection?  What type of internet browser are you using?  Here are some additional resources that may help you with the internet connection:HP PCs - Troubleshooting Wired Home Networks (Windows 8)HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)HP PCs - Resolving issues in Internet Explorer (Windows 8) Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

Maybe you are looking for