Tutorials w/ Pellets broken in current release

I'm using Proscenium p2_061312 with Flex 4.6.0/AIR 3.2 SDK and FlashDevelop 4.0.3 RTM.  All the included tutorials work fine except for those which involve Pellets, specifically Tutorial06_SimplePhysics.as and Tutorial10_Actor.as.  When I try to run those, I get errors such as:
Error: Type was not found or was not a compile-time constant: PelletManager.
Error: Call to a possibly undefined method PelletRigidBody.
Perhaps Pellet.swc was updated and the tutorials are assuming the old version?

try to replace PelletRigidBody with btRigidBody

Similar Messages

  • How to get current release code for PO

    Dear ALL,
    We need a FM or method , which can give us current release code for PO.
    We have PO number with us and PO details like Release strategy and release group.
    Please help, if anybody knows the way.
    Regards,
    Nilesh

    Hi,
    check table EKKO you will get details for that  release code 
    and check following link
    [http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm]
    Regards
    Kailas Ugale

  • I wnet to a web site tonight and a meeage from FireFox displayed that I was not on the current release. I know which release I'm on and at this time I do not wish to upgrade my release.

    I use release 3.5.1 of FF because it is compatible with the software I use. Nothing worse than you nagging me that I'm not on the most current release. Get off my ******* back. Stop the nagging messages. I'll upgrade when I'm ******* good and ready to upgrade. Un F'n believable!
    ''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''

    The solution is simple. Go to Tools, select Options, a window will pop up. Click Advanced, select Update tab. In the options 'Automatically check updated to', uncheck 'Firefox'. Click Ok, you're done. :)

  • What is the Current Release of P6?

    What is the most current release of P6? Currently I'm using P6 Release 6.2.1 SP4. I have seen Release 8.2 in some forums as well as a new release mention of 9.1? My company intends to upgrade to the most current release from what we have now (6.2.1 SP4). Are there any issues jumping from 6.2.1 sp4 to 6.8.2 or whatever is the most current? Any insight would be greatly appreciated. Thanks! :)
    Shannon

    You're welcome, Shannon!
    I believe Release 8.2 can only read databases created using 8.0 and above. That is a major flaw if you're trying to connect to a database containing several projects. The only workaround would be to export the projects from the old databse and then import the projects back to the new database.
    By the way, the version as are follows:
    P6 version 6.0, 6.1, 6.2, etc
    P6 version 7.0, 7.1, 7.2 etc
    P6 version 8.0, 8.1, 8.2
    Hope this helps!

  • Help needed to install Flash Player : 'Non-Current Release' problem!

    I been encountering problems while trying to install Flash Player on my laptop running Windows 7.
    Originally Flash Player does not work as I understand it is not supported on 64-bit Internet Explorer.
    After installing 32-bit IE, the following issue of 'non-latest version' arises and all installation were aborted by the application :
    The below were steps I had taken to no success.
    1.  Via the 32-bit browser, downloaded flash player un-install program and did the uninstallation with success.
    2.  Rebooted the laptop.
    3.  Via the 32-bit browser, downloaded the flash player version 10.0.45.2 from http://get.adobe.com/flashplayer.
    4.  After downloading it automatically did the installation with 100% completion.
    5. The program proceeded to activate the flash player with a webpage saying if the flash player is working properly, I should see a video and Flash Player's logo.
    6.  Before anything was displayed, an error message popped up to say I was trying to install a non-current version and that I should go to same webpage to download the latest version. The activation was then aborted.
    Tried many times but always encountered same problem and hence cannot proceed to use the flash player.
    Need assistance to diagnose the problem and to get Flash Player working on my laptop. Appreciate any help to get it working.
    Regards.

    Thanks to efforts of eidnolb and Bob, the installation of flash player into my laptop is now working .
    Bob's installer enabled the download successfully.
    Eidnolb's link in post 6 trigggered me that I may have previously installed the pre-release version 10.1, thereby leading to the 'non-current-version' problem too. Post in that link adviced to uninstall 10.1 using the pre-release uninstaller.
    I suggest others who had encountered this non-current release to uninstall first using that specific uninstaller, before attempting to install the most current release. I may have installed the 10.1 pre-release in desperation after failing numerous times trying to figure out why flash player does not install in browser not knowing its currently-non-support of 64-bit browser.
    Once again thanks for support, eidnolb and Bob.
    Cheers.
    Kelvin

  • How to get CV04N to display only current released revision

    Hello all-
    We need to set our CV04N results return to show only the current released revision as determined by Document Status and Valid From Date.
    Example:
    Document 1234567/BIO/000/00   Status is RL      Valid from date is 01/01/2011
    Document 1234567/BIO/000/01   Status is RL      Valid from date is 01/03/2011
    When CV04N is executed we only want the return display to show Document 1234567/BIO/000/01 because it has the most recent valid from date of 01/03/2011
    We have explored using the layout/filters but Valid From Date does not appear to be an option.
    Help-please.
    Thank you.
    Cindi

    Hai....
    Straight forward in the CV04n screen there is a selection filed
    Document Status
    Date From:   & Date To:
    in that just place date of your selection, you will get the desired output, but you have to maintain the Valid From in the CV01N/CV02N.
    Regards
    KHS

  • Additional PR release step in current release strategy

    Our current PR release strategy is overall release and based on 3 characteristics: doc type, creation indicator and total value of PR. release code is relevant to standard workflow WS20000077 with role resolution using user-exit.  User exit is based on the position of PR creator to navigate HR org structure for assigning manager who has sufficient release authority as workflow approver.
    There is a request for additional release step in case the PR contains item for a particular material group or fixed vendor, then the first release step should be taken by a dedicated position/user.
    I found that it is quite confusing while PR release strategy is overall release but referring PR item level data.  Please advise how to implement the additional release step.  Thanks.

    Hi Arghadip,
    Thanks for your reply.  My intention to create different doc type is for separate set of release strategy.
    In current release strategy, for example, if doc type = NB, creation indicator = manual and the total value of PR is $1K, then the PR requires release code A1 for approval and the approval is align with the company finance policy. The manager (with release authority A1) of the PR creator then selected by the user exit and assigned with workflow task.
    For the request for additional release step, if doc type = ZS, creation indicator = manual and the total value of PR is $1K, then the PR requires release codes AA and A1 (new release strategy).  The user exit will assign a dedicated position/user (not necessary the manager of the PR creator) for release code AA, and then assign the manager of the PR creator for release code A1. Therefore, even the total value of PR is also $1K, but since the PR item contains material group 80501, then the PR require an additional approval on top of the $1K financial approval.
    Your comment is welcome.  Thanks again.

  • 4 ETQ399 ... current release too low ( 2002_1_31I)

    HI,
    I am running an upgrade in modus PREPARE from 4.6C to ECC 6.0 and I get the message that:  current release too low (< 2002_1_31I).
    I downloded the Add-Ons 2002_1_46C (SAPKIND76A).
    I extract it to \usr\sap\trans\EPS and the file is ...\EPS\bin
    I logon to the the system and uploaded it and I see it is installable.
    Problem: When I want to install it the system tells its already installed.
    Why I see it its installable? Why PREPARE ask for it when its installable?
    ADDONCHK.LOG is:
    ................................................................1 ETQ201XEntering upgrade-phase "ADDON_CHK" ("20080915234114")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPSR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ399 Range check for Add-on CA-JVA 462 ...
    4 ETQ399 ... current release within range (41B - 462)
    4 ETQ399 ... ==>> OK
    4 ETQ399 Range check for Add-on PI 2001_2_46C ...
    4 ETQ399 ... current release too low (< 2002_1_31I)
    4 ETQ399 ... ==>> TOO LOW
    4 ETQ399 Range check for Add-on SAP_NOTES 46C ...
    4 ETQ399 ... Add-on not ranged
    4 ETQ399 ... ==>> OK
    4 ETQ010 Date & Time: 20080915234114 
    Any Idea?
    Thanks in advance
    HanseAtik

    Hi Markus,
    All I have now is:
    PI                    PI 2001_2_46C  Installation
                            SAPKIPZE41    imported
                            SAPKIPZE42    imported
                            SAPKIPZE43    imported
                            SAPKIPZE44    imported
                            SAPKIPZE45    imported
                            SAPKIPZE46    imported
                            SAPKIPZF41    not imported
                            SAPKIPZF42    not imported
                            SAPKIPZF43    not imported
                            SAPKIPZF44    not imported
                            SAPKIPZG41    not imported
                            SAPKIPZG42    not imported
                            SAPKIPZG43    not imported
                            SAPKIPZG44    not imported
                            SAPKIPZG45    not imported
    And the upgrade says:
    The version 2001_2_46C of  the Add-on PI is too low for this upgrade (< 2002_1_31I).
    You need to upgrade the Add-on first before you can proceed with PREPARE.
    Thanks in advance.
    HanseAtik

  • Current Release Compatibility with Lenovo IdeaPad U300

    Has anyone had the opportunity to use the current release (2011.08.19 at time of writing) on a Lenovo IdeaPad U300? I am thinking about picking one up but want to confirm hardware compatibility before I did so. I looked in the HCL in the Wiki, but didn't see this particular model listed.
    Thank you in advance for your help.

    Understanding that I work for Adobe and I worked on Spry
    features for DW CS3..
    There isn't anything special about working in DW8 with Spry.
    Your widget will render as exploded markup: easy to see content but
    harder to determine layout. But as HTML and CSS, editing should be
    straightforward.
    But I am spoiled by having widget rendering and Spry code
    coloring and hinting in DWCS3 for many months now.
    Widgets render as they do in the browser and you can
    add/remove tabs and switch between them.
    Spry code hinting, esp with the data stuff, is quite fun.
    But, for now, DW8 will do just fine for you.
    Thanks,
    Don

  • Broken PCI card release tab question

    Ordered and received the ATI 4870 video card upgrade from Apple and read the included instructions. In lifting up the plastic card release tab at the end of the PCI express slot to release the ATI 2600 video card the plastic tab broke off and fell down into the machine. I was able to remove the old card and install the new one without other problems. The new card seems to be working well.
    Should I be concerned about this broken release tab and the plastic piece which has fallen who knows where? I have Apple care on the Mac Pro and there is an Apple store in the area.

    Apple will probably not cover it since you broke it. There should be no problem using it without the plastic latch, but if you ship the Mac Pro, make sure the card is pushed all the way in before connecting power.

  • Handoff broken in Public Release, but works in Beta. Help?

    I have a partitioned drive; one that was strictly a Yosemite beta install, and my day-to-day work machine that had been in working order.
    This second drive was updated to the public release of Yosemite.
    Here is one of my many dilemmas with Yosemite:
    Handoff is broken.
    Doesn't work, ever.
    In the Beta build: Works like a champ! Every time.
    Yes, all my software is up to date, and my hardware is supported.
    Any insight on resolving this?

    I have a partitioned drive; one that was strictly a Yosemite beta install, and my day-to-day work machine that had been in working order.
    This second drive was updated to the public release of Yosemite.
    Here is one of my many dilemmas with Yosemite:
    Handoff is broken.
    Doesn't work, ever.
    In the Beta build: Works like a champ! Every time.
    Yes, all my software is up to date, and my hardware is supported.
    Any insight on resolving this?

  • Lightroom 4 (beta and current release) - Issue with Select Catalog screen - catalogs not displaying

    I noticed this during the beta test version of LR4 and was hoping it would be corrected in the actual release (which I installed yesterday).  Here's the issue:
    When the Select Catalog window opens, catalogs will not display unless I click in the empty space in the window (first screenshot)...then they will appear one by one as I start to click (second screenshot) until all are displayed.
    Does anyone have any suggestions??  These catalogs are NOT on a network drive, they are on my desktop machine (Win Vista 64-bit).

    I have the identical problem.
    LR3 worked perfectly. LR4 won't refresh the Catalog screen at startup without me clicking on each entry. Only when an entry is selected will it appear.
    I have an nvidia GeForce 9800GT video card, supporting dual monitors.
    I'm using Vista 64.
    I just upgraded to LR4 64bit, and immediately had this problem.
    I installed the most current video driver (2/12/2012) with no change in problem (or performance).
    I have not noticed any other program having issues, and have not changed any hardware recently.
    I am also noticing that LR4 is visibly slower than LR3, to the point where most sliders don't slide evenly, but jump in increments unless I move VERY slowly.
    I've watched the processor load using resource monitor: it is not peaking over about 65% during slider actvitivity.
    I have an Intel Core2 Quad CPU Q9550 @ 2.83GHz with 8 gb of ram.

  • Is there a current release date for the Ipad Air 2?

    I was looking to get the Newest Ipad Air, but then started to look around and it was about time for Apple to release a new Ipad. Does anyone have an idea on release dates and possibly a pre order date time frame?
    If so Thanks for all your help!

    No dates or even any suggestion that a new iPad will be released have been given and since we are not allowed to speculate about Apple's future plans here, the only thing that can be said is, that if something is going to be released it will likely be shown at the traditional September Keynote. With dates being specified then.

  • PICTURES CRASHING YOSEMITE CURRENT RELEASE

    SEconomic try at this.  I was running PICTURES on a 2011 Mac Book Pro with 8 gig of memory and a 256 gig SSD.  Downloaded pictures from my camera, started cropping one picture, the screen shifted to the right, the spinning ball came up and the system locked up.  Restarted and the screen immediately went to vertical bars, progress bar went to about one third the way, screen reset to pure white and processors began churning.  System will not take keyboard commands to boot from Yosemite boot USB or recover from Time Machine.  any suggestions?

    This can happen if adware  Genieo is installed without your knowledge. Removing it will help,
    1. Download and use free AdwareMedic to remove the adware
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.
    Note:
      If you don’t have another browser installed,
    startup into SafeMode, log into your account, launch Safari
    and download  AdwareMedic or the removal instructions from Apple.
    How to start up into Safe Mode?
    Shut down the computer.
    Press the power button. Immediately after you hear the startup sound, press and hold the Shift key.
    The Shift key should be pressed as soon as possible after startup,but not before the startup sound.
    Release the Shift key when you see the Apple logo on the screen. Startup will take longer than usual.
    Launch Safari. Follow the  steps posted above to remove the adware.
    Once done, quit Safari and restart the computer from  in the menu bar.
    * Source:  http://support.apple.com/kb/PH18760

  • LMS Current Release Question

      I been away from LMS since release 3.2.   Am now interested in what has changed since then.
       1) Is LMS now available for Redhat Linux ? 
       2) Is HUM included with an unlimited license for LMS or is HUM still a seperate add-on ?
       3) Is Cisco Prime just LMS repackaged as an applicance ?
    Thanks

    1. Among the distributions available is a soft appliance which can be loaded onto a VMware ESXi server and runs as a Linux guest OS. It includes the underlying hardened Linux, a variant of the RHEL distro, I believe.
    2. The product formerly known as HUM has been incorporated into the Performance aspect of the LMS server.
    3. Cisco Prime is the umbrella term for several products. Cisco Prime Infrastructure is the only ordering mechanism for new purchases and includes Prime LMS (4.2) and NCS (1.1). It is available as an installable application server (for Windows or Solaris), a soft appliance (as I mentioned above), or as a hardware appliance with the product pre-installed.

Maybe you are looking for