TV@anywhere master huge problem

I have the TV@anywhere master and when i am changing the channel ( after a few times) the comp friezes

Just to make sure I understand. It is your computer that freezes, not the TV tuner program. And you have the problem in at least one TV tuner program other than MSIPVS. PowerVCR is also freezing. Again it is not your computer that is freezing but the TV tuner programs.
You did not answer the question: did you install the CD software or did you install the software from the MSI site?
If you did install the software from the MSI site and the tuner programs are freezing, check if the TV tuner drivers (MSI 8606 Video/Audio Capture) are sharing an IRQ with another major component (example video / audio card, ignore USB controllers). In Windows you can do this using the MSInfo32.exe program. If the IRQ of the tuner driver is shared, move the TV Tuner to another PCI slot.
If you did not install the software from the MSI site, download the MS-8606 files and install them.

Similar Messages

  • What MSI should do to fix MSI TV Anywhere Master !

    able Of Content for below email:  
    1) context
    2) essentials on how-to definitively fix MSI TV Anyhwere Master while  natively recovering your customers long-term trusting in MSI logo.
    - - - - - -DETAILS:
    1) My neighbors have recently bought 2 pieces MSI - TV Anywhere Master tuner cards by following my latest advices.
    They both are students engaged by few media tasks in our campus to provide internal training by video samples and news broadcasts in local areas.
    One of them told me his intention to even start some anti-MSI virtual campaigns through world-wide forums against your product as a reasoned revenge for huge effort with no results during lot of time-loossing trials to setup, stabilize and properly use your MSI proprietary software and drivers (MSIPVS-WinDVR) delivered by with this product's original package.
    Now they claim as many others found on alike forums, all  money back and tens hours stress compensations from proximate shopping center cause these MSI tuner cards not working as they thought while comparing MSI product with other's alike.  It seems that MSI duped its long-term customers.
    They tested on both licensed and updated Windows 98 SE and latest Windows XP Pro (latest service packs included) but received undesirable results that we will compact them as below to suggest you what and how to fix it.
    2) Best ways to fix it :
    I. redesign all its drivers to include that MSI "secret" proprietary strings-keys requested to keep full activated your TV Anywhere Master card (CX23881-19 chipset) anytime for any other tuner/capture application (other 3rd party software like ChrisTV Pro, DScaler, PowerVCR, Virtual VCR /freeware!!!)  
    Currently, all these better featured applications can setup and recognize most of your competitors alike cards (based on new 10-bit CX2388x chipset) but not yours MSI Anywhere !
    It is worst way to freeze by default your customers expectations and usage development!
    So, unlock your card by new drivers really compatible with Microsoft OSs so, nobody will complain anymore against MSI hurried & unfinished or less-featured products due to any software related issues!  
    Remind that you are one of greatest HARDWARE producer not SOFTWARE, so, better provide what you are to provide!   Let others much more trained for software purposes to do it and to compete among themselves while getting much more freely alternatives to promote your cards to an wider range of users with different skills and interests.  
    II. redesign MSIPVS-WinDVR's setup panel to recognize and include any codec previously installed in the system during its launching, like your competitors' above software already done it successfully !  Mostly focus on DivX for video and MP3 for sound and alike codecs which are mostly used and available today everywhere (>70%!) both licensed and freeware releases, comparing with those obsolete MPEG files!  There is no need to train yourself by own software cause you better ask people like Chris(TV Pro) to do it for you much better and cheaper!  Forgot about MPEG2 and MPEG4(yours!) cause are for nothing !  Your MPEG4 not works on others PCs while MPEG2 is no use for most customers due to large resources requirement with even lower performances than an very well-settled DivX, which needs ten times lower space!!
    Go DivX 5x and MP3 for any software based encoding purposes is the only target for your recording settings panel!
    Also for Win Producer /Win Coder which can not not administer DivX and MP3 correctly.  (ask VirtualDub to replace it cause it is working infinitely better!)
    III. channel settings and scanning must be also redesigned to get more stable and transparent to the user: add a new column with its channel frequency and a real working stable control to FINE tuning and SAVE.  
    Finally, BEST is to setup a dedicated text file to save and launch all configurations within.  Anytime when push APPLY or SAVE, to write something in that file and then to read from there instead of use usually unstable system registry dynamic records.  In the same way, customer who want to fix something or really save their settings to preserve your cards and applications for unexpected failures, development etc, will be able to adjust on his own risk some settings which were not correctly settled by the application etc.
    This is to provide much more reliability to this card usage and to compensate potential bugs in future releases.
    IV. Provide an interface like above (III) to the enduser who  mostly demands to reconfigure remote control unit which is now too poor and not include essential controls like start/stop recording etc.  All remote controls to be written in a text file at also enduser disposal to modify shortcuts in order to reallocate remote control buttons to another panel controls etc.
    V. MSI-Radio tuner must have channel name (retrieved from FM table settings) displayed under the frequency and much more selectivity and real correct scanner (not use that "less stations" control).  It could be very demanded a wider range scanning from 30 MHz up to 110 MHz for many other locations.
    Both for TV channels (see MSI-PVS to provide full tuning all frequencies including manually settings each channel!)
    If it is hard to do it for Windows 98 release, provide them for XP at least but inside a better structured website than now.  In the present there are still many confusings and no stable procedure (that provided on the original CD has lot of bugs and missings risking to freeze the system!) regarding from where to download updates (too many different addresses to discover inside MSI-support site).  MSI TV Anywhere Master must have its own unique sub-site with all updates downloads included in the same page, both for drivers and for applications!   Also is a must to include WDM MS-8606 drivers instead of current ones to not receive anymore that error "nVIDIA WDM universal Capture" not found.
    Please email me and my neighbor marcellino
    ([email protected]) when demands described above will get fixed !
    Thank you in advance and wishing MSI good lock for better results!
    Regards,
    TekSam & marcellino
    ([email protected])

    Exactly my thoughts.
    Probably they're even too affraid to give us some answers about how, what and where.
    I had a previous descussion about an MSI mb that wouldn't accept a 40GB Maxtor hd. My asus mb didn't have a problem with detecting it.
    Their reply was to flash to the latest bios version, which I already wrote that I did that in my e-mail to them.
    A friend of mine had the same MSI mb, guess what???   same problem. His Dell pc, no problem.
    Wrote back to MSI, waiting for 3 years now , never received an e-mail. (wrote a couple of reminders).
    I now bought this tv nowhere card and I have the same problem as many people have....     alot of sh*t ....   and not working. No refund, 0 support, users must help other users to solve certain issues, --->  10 clean versions of winXP and hours and hours of stress
    This will be the last MSI product that I will EVER buy.

  • TV@nywhere Master instalation problem

    Hello,
    I am new member and I need help. I have TV@anywhere Master card but I have trouble to install software MSI PVS. I download the latest sw and driver from the MSI site, but it still do not work. Problem is that I can not change Country (Slovak Republic) and Input type (Antenna/Cable). When I select them and push apply/ok button then setting change back to Afganistan and I can not tune any chanel. Can somebody help me, please.

    I forget, I have red the collection of tips & tricks and I tried it, but it does not help, MSIPVS still Stuck-at-Afghanistan and antenna Please help.

  • Where is thet *.dll (TV Anywhere Master)

    I look... but didnt find any message about anyone having problem with Windows ME and driver for TV Anywhere Master.
    I cant stand that Im the only one who have problem with drivers on Win ME, simply reports that cant find tsbyds.dll or  tsbyd something.dll I cant remember right now.
    On Win XP with or without SP1 work just fine....

    I cant beleve that no one have problem with missing TSBYUV.DLL when they are instaling drivers on Win ME.
    Nevermind, thanks for the support.... I will find solution my self.

  • I have a huge problem with memory usage.

    I am having two very huge problems with the amount of memory the game I'm working on is using. The first is that the background image for a part of my game takes up ~45mb of memory, but believe it or not, that's not my worst problem. i'm not worried about that right now.
    The really, really big problem does involve that image, though.
    Whn I'm done using the image, I can't get the resources it uses to be freed. As a result, the program uses more and more memory every time you go into that area of the game, because the memory used by tha area is just sitting there.
    I used Jprofiler to figure out exactly what wasn't getting released, because I do everything I know how to make everything be garbage collected, including setting all the references to the image to null after you leave that area of the game, but nothing worked.
    After I leave the area with the huge memory leak and give everything time to garbage collect, the main screen for memory usage shows about 45mb of memory used by 20 or so instances of int[], which is obviously the image.
    However, this obscenely huge int array doesn't show up in the heap snapshot, which according to them means there's no reference to it or the image anywhere in the program.
    Here's my question: If there's no reference anywhere to this int array, then why isn't it being garbage collected?

    Maybe you haven't actually released all references to that data.
    Or if you have one 45mb image, maybe you have a bunch of other huge ones and you're just seeing those.
    Why do you have a 45mb background image, though? Can't you use a standard technique like tiling it?

  • Tv anywhere master... till when?...

    Hello everybody and excuse my english... 
    I have a tv anywhere master card and i'm getting tire of it... (i think i'm going to get a tv tuner card based on ATI's new Theater 550 Pro processor either POWERCOLOR or another brand... NOT Msi...)
    the reason as you all can guess is the DRIVER/SOFTWARE problem... (even with these you can tell that the hardware is pretty good)
    for example this hissing sound the card makes when windows starts... the best we can do is to change the input source to aux instead of line in in order to get it muted when the OS is booting, ppl for me that is a solution if someone give the card for free, not for something i paid for...
    the issue is supposed to be related with the Crossbar Driver... well when you see the beta driver the AUDIO and VIDEO capture driver are new but the TV TUNER and the CROSSBAR driver are the same problematic drivers of almost 2 years ago... (this is supposed to be fixed in the beta drivers... well i still had the problem...)
    anyway i installed the beta drivers and had to install the old ones again because the image gets grainy and in general of lower quality...
    well this is what i wanted to share my thoughts with you guys
    good luck

    And you tried the new drivers here https://forum-en.msi.com/index.php?topic=77045.0

  • Huge problem activating BIS

    hi everyone.
    I just bought a brand new unlocked Torch 9800 from a small online shop in my country ( Romania), and i now have a huge problem. I bought prepay card from my carrier ( Orange), activated the BIS option and a data option, then i proceeded with registering the device. First of all, I tried to registed the device on the network, no luck, no message came back telling me that registration was fine, as it should have. Then i went to the blackberry.orange.ro website in order to create the account from there, i get a message telling me that my BIS account is suspended or deactivated.... I called Orange and they said there is nothing wrong on their side, all configuration is ok there and they cannot help me, so i rather contact RIM. The seller doesn't want to exchange my phone, since there is nothing worng with it in his oppinion...
    I can't explain myself how a brand new phone can have this problem...
    I was wondering if anybody can help me with tracking down my torch ( will provide pin and imei on private message), and tell me if there is something really wrong with my device or it's just an unfortunate mix up...
    Thanks in advance
    LE : cheched out the vendor code : is 600, a  load of carriers listed there  600 GeoCell/Warid Pakistan/Oman Mobile/Zain Kuwait/Cellplus/Zain Zambia/Ufone/Nawras/Zain Jordan/EMS/Zain Ghana/Safaricom/Zain Malawi/Telecom Serbia/Telenor Pakistan/Zain Nigeria/MTC Touch/Wataniya Kuwait/Mobilecom/Mcel/GO Mobile/Zain Kenya/Batelco/Mobinil/DU/Etisalat Nigeria/Emtel/Etisalat Misr/Zain Uganda/STC Bahrain/Zain Tanzania/Zain Saudi/UTL/Orange Botswana

    Hi and Welcome to the Forums!
    The BIS account is not a function of your SIM. Rather, it is a function of your BB PIN, which is unique in the world. Only one BIS account can exist anywhere in the world for one BB PIN. So, for instance, if the BIS account is still active on another carrier, your carrier will not be able to create a BIS account for your BB until the old carrier releases the PIN from their BIS system.
    But...
    alexdiscus wrote:
    i get a message telling me that my BIS account is suspended or deactivated....
    That worries me the most...that usually only happens when something is amiss with the device. Stolen, lost, or otherwise something wrong. And, in that state, no carrier in the world will be able to create a BIS account for that BB. You will have to track down why it is in that state and get it cleared up...if that's even possible. The seller certainly should work with you here...if they represented a device that was capable of doing what you are attempting, then they misrepresented. But, as always, buyer beware...
    BTW - you have no free method to directly contact RIM for any support. All support starts with the carriers and authorized resellers. Since you didn't purchase you BB through your carrier, they may or may not be willing to escalate your case into RIM for assistance...you will have to plead your case with them.
    There is a fee-based method for you to get support direct from RIM...but even the initial contact costs you money. You can investigate that here:
    http://us.blackberry.com/support/programs/technical/incident.jsp
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TV@anywhere Master locks up

    Just purchased a new TV@anywhere Master 8606. The thing just does not work. There are two problems that make this card completely useless in my system:
    1. MSIPVS constantly freezes. Sometimes it freezes the entire computer - even the mouse cursor won't move anymore. I have to hard reset the machine. This happens constantly. I've never had MSIPVS run for more than a minute or two.
    1. The MSIPVS application only finds half the channels. I have an external antenna and my reception is near perfect. All channels display perfectly on a TV using the same cable and arial point. I even tried another brand of TV card and all channels worked perfectly.
    For the channels that it does find, the image quality is poor.
    The machine I am using is a new P4 2.4 Ghz machine with hyperthreading CPU. Maybe MSI's software has trouble with these new CPUs?

    I use a TV@nywhere master on and AMD AthlonXP PC with minimal problems. I have heard of others with P4s have simular problems to yourself.
    The Drivers and MSIPVS do need to be fixed as there are definite problems especially if you try to use tuner with any other software. The Tuner on board the TV@nywhere master is very new and does not seamed to be suported correctly by any software I have tried. I must admit that I have minimal problems with MSIPVS but the tuner drivers are not satifactory. I can state that this card has exceptional quality on capture from good sources and a great display when TV is played via Svideo or Composite-in using either Dscaler or ChrisTV.
    I did have problems getting the MS-8606 Audio drivers to install initally but once I had manually installed them there were no more problems. Maybe worth checking that the drivers have been installed. In Device Manger you should see references to;
    MSI 8606 Audio Capture
    MSI 8605 Crossbar
    MSI 8606 Tuner
    MSI 8606 Video Capture
    if any of these are missing or you have a yellow exclaimation mark next to them, either re-install the drivers and/or try moving the card to another PCI slot but do not use the slot next to the AGP slot. Some machines are very fussy as to which PCI a TV card will work in.

  • TV Anywhere Master Installation instructions combined with WinProducer

    Installation of MSI TV Anywhere Master on Windows XP SP1, DX9 (Should work on other installations but tested on this.)
    First, before beginning go to http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_ten.php?UID=193 and download the new driver package.  You will need to run the executable and extract it to a folder before proceeding.
    UN-INSTALLATION
    Before proceeding you need to uninstall all of the software that came with the TV Anywhere Master.  Below are instructions on how to do this.
    WinProducer Un-installation
    Now, open Add/Remove Programs.  Locate InterVideo WinProducer and remove it, it will request you to reboot, go ahead. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
    MSIPVS Un-installation
    Reopen Add/Remove Programs and locate MSIPVS and remove.  Allow it to remove all files include locked files that it requests to do at next reboot.  REBOOT
    MSI Radio Un-installation
    Reopen Add/Remove Programs and locate MSI Radio and remove it.  Allow it to remove all files include locked files that it requests to do at next reboot.  REBOOT
    TV Tuner Driver Un-Installation IMPORTANT!
    Reopen Add/Remove Programs and locate and remove TV Tuner Drivers.  These are the drivers for your TV Tuner even if they don’t say MSI!  REBOOT
    Now you are ready to proceed with the installation.
    INSTALLATION
    Installation of MSI TV Anywhere Master on WinXP
    TV Tuner Drivers
    Locate the folder you extracted the drivers downloaded from the link above and run “PVSSetup”.  Follow all onscreen instructions.  REBOOT
    WinProducer Installation
    WinProducer needs to be installed next because of a file incompatibility with MSIPVS.
    Insert the CD InterVideo WinProducer / WinCoder.  Follow the onscreen instructions to reinstall.  REBOOT
    MSIPVS and MSI Radio Installation
    Insert the CD Labeled InterVideo MSIPVS.
    In the AutoRun make sure you Select MSIPVS, NOT the drivers.  If you select the drivers you will have to start over by removing the software again.
    Follow the onscreen instructions and during the install when it encounters a locked file select “reboot”.  Once completed reboot the system.
    You should be all set now!  Have fun…..  If this doesn’t work on your system please let me know your config and what problems you are still having….
    Thanks,
    Larry (digitaldreams)

    Note: NTSC region, FFDSHOW set to accept raw video, output just about anything, de-interlace set to ffmpeg (seems better than 5-pass or TomsMoComp; any attempt to link in a DScaler .dll crashes the player) resize and sharpen (to your display res, set "No Aspect Ratio Correction), "Experimental" method (much less load than Lanczos, which is slightly better) 1.60 for both luma and chroma.
    1. Load MPC, click on File>Open Device>Select "Conexant 2388x Video Capture", click OK. If necessary, View>Capture to get control frame.
    2. Play>Filters>Conexant 2388x Video Capture>MSI 8606 Crossbar>drop Output Menu>select Video Decoder Out (this turns on the Apply button)>Tick Link Related Streams>Click Apply Button (and voila, sound)>Click OK to exit.
    2a. Play>Filters>MSI TV Audio>Set Channels and Language (seems to be a one-time only requirement).
    3. Play>Filters>MSI 8606 Tuner>(set country code, tuning mode, input & video standards if necessary) change channel once via filter keypad or up/down arrows (seems necessary to get pageUp/Down keys to be recognized).
    4.Play>Filters>Conexant 2388x Video Capture>Properties (make sure Video Standard under Video Decoder tab is correct)>Video Proc Amp>Set to personal preferences (I like Sharpness at max setting, you may find it 'grainy').
    5. Usually, the tuner output reverts to RGB16; FFDSHOW (for me, anyway) seems to need YUY2. Then crank the horizontal & vertical res to max, click on "Set".
    6. Close the Capture frame, adjust image window size, position to your liking (alt+enter toggles fullscreen - doubleclicking the image usually locks everything up).
    Simple eh? Worth it? Your decision. Not quite DScaler, but close.
    Channel selection by keyboard is only next/previous (and opposite that of MSIPVS). Channel jumps can only be done by the filter. (Right click on image if you are in full screen (and if you are simply watching TV, you can drag the filter window down and offscreen).
    And there are all sorts of weirdness - you never know what settings will "stick" from one time to the next. Haven't been successful in getting it to record, and after playing around with some other recording programs, I now have this echo (or even echo/echo) sound (I have to TURN OFF the line input to the sound card to get rid of it, yet the line input volume slider still has effect).
    It's a great time waster.  

  • Huge problem using apple mail while sending email to a group...

    Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
    Greetings and sorry for inconvenient english...
    Christof

    How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

  • I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

    I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

    Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Huge problems using external iSight or DV video camera on my MPB DCD...

    Ok, so I am developing some applications that make use of a video camera for motion tracking, and I have run into a huge problem when trying to use any external video camera. I have both an external iSight in great working order (I have tested it on my tower, which is also brand new, but on 10.4 for reasons of other applications not yet supported on 10.5.1) and also a Sony DCR-TRV520 NTSC Digital Handycam. (Once again, works perfectly when plugged in to the tower.) But if I plug either of them in to my MBP, no programs recognize their existence at all, be it iChat, iMovie, or my application. Nothing shows up in system profiler either. I try reboots, I get nothing... the internal iSight constantly takes over or is my only choice in applications.
    And before you even ask, yes, my firewire port works, as I can plug my external firewire solo audio interface into it no problems, and no, I don't have any other firewire devices plugged in when trying to get the computer to recognize they are there.
    Quick response would be awesome, as I am on a timeline to finish the program development and it is very important that I get this to work, preferably the Sony.

    I just read this in their Forum mate ...
    Cycling 74 has not yet finished evaluating Mac OS 10.5, aka Leopard.
    As with any new OS, you are advised to tread cautiously if you are
    considering updating. We are interested in hearing any and all reports
    from users, and at some later date we shall publish full details of
    our compatibility. Until that time use of our software on Leopard is unsupported.
    If you wish to make reports of your experience with Leopard, please send them to support at cycling74 dot com

  • Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information?

    Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information? This happens right before the DVD would be finished burning but instead crashes and leaves the long report your have to scroll down several times to read. I had to take several screen captures of the screen to get the WHOLE report. Here is two:
    (If there is another thread on this - just answer the question or refer me to it. I'm past due on a big project. Don't have time to read all 21,000 discussions in the iDVD thread. Be kind. Thanks )

    Some things to try first:
    1. Disconnect any and all 3rd party devices that didn't ship with your mac directly from apple (both FW and USB included). 
    2. Restart your mac without any 3rd party devices attached whatsoever. That includes ext. hard drives, blue tooth devices, and any third party memory product/s. Basically, anything that doesn't come directly from apple has to go (at least while troubleshooting).
    3. Need you to dispose of the plist for iDvd also. Go to you Home folder, the one that looks like a house > Library > Preferences > com.apple.iDvd.plist and drag and drop this file/s to the trash. Make sure to first quit iDvd prior to disposing of this pref. file/s.
    4. Run apple's disc utility and repair permissions. Applicantions > Utilities > Disc Utility > Repair Permissions.
    5. Restart your mac yet again, and try iDvd one more time.
    6. If it's still at issue then please open iDvd from a separate user account and try your project one more time. If you don't know how to create a separate user account then just come on back and one of will show you how.
    Good luck.
    Message was edited by: SDMacuser

  • I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

    I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

    The ! sign before the song means that the actual song is no longer on your computer and/or iTunes library.

Maybe you are looking for