TV @nywhere Satellite II DVB-S2 VIA VT6112L Chipset

Hi,
I have MSI TV @nywhere Satellite II DVB-S2 VIA VT6112L Chipset card.
It is working with 32-64 bit BDA driver XP to Windows 8 and I received both of Standard definition & High Definition channels without problem.
I would like to learn about how to setup high speed internet data from Satellite ISP, the card placed only sound, video & game controller at device manager, no driver at network controller.
Please help about how to setup network driver and which software I should use for it.

Have you tried the latest driver from >>Intel<<?

Similar Messages

Via KT400A Chipset

About how long can we expect to see the updated Via KT400A chipset in a MSI board?
Here is a link to KT400A article:
http://babelfish.altavista.com/babelfish/urltrurl?lp=zh_en&url=http://www.gzeasy.com/itnewsdetail.asp?nID=7998

yeah, a new board is coming...a mobo with kt400a chipset!
a little bit better than the nforce2 boards!

8X AGP Card (FX5700) on KM2M Combo Motherboard (VIA KM266 Chipset)?

I have got a MSI KM2M Combo with a VIA KM266 Chipset based motherboard [Model No: MS-6738 (v1.X) Micro ATX Mainboard].
What is the voltage of the AGP 2.0 slot in the above mentioned motherboard?
Can I run an 8X Agp card (Nvidea GeForce FX5700) without any problem?

Quote
Originally posted by andysmith45
So, it will run without any stability issues and without getting defective? I have got a 300W SMPS. Is this supply enough?
This is not enough PSU for that VGA card
Quote
Frontech 300 Watts SMPS (3.3V 14A; 5V 30A; 12V 12A)
Needs to have at least 25A @ 3.3V, and over 18A @ 12V to be on the safe side.
Otherwise, there should be no problems running that VGA card.

8800GT and VIA 880 chipset = incompatible

As you might have heard, the new VIA 880 chipset is incompatible with the 8800GT.(all versions)
But there is hope as it is possible to downgrade the 8800GT so that it runs with this chipset, as you may read here:
http://www.mvktech.net/component/option,com_joomlaboard/Itemid,34/func,view/id,47800/catid,13/limit,10/limitstart,0/
Now, I need to flash my VGA, so that I can use it in GEN1-Mode.
Several companies have handed out the necessary *.rom file that allows you to flash your VGA.
(EVGA, Sparkle, Gigabyte etc.)
Unfortunately, the MSI Support I contacted is incapable of doing a short research and provide me the necessary resources...
"Thank you for your support. This card is PCI-E 2.0 version, if your motherbaoard is PCI-E 1.0 version, you can also use it on this motherbaord, but it maybe run at a lower performance."

Since the MSI 8800GT is just standard design you could just use the .rom of a standard GT of a different manufacturer. If you have a oc model it would then run with standard GT clockrates (...unless you're using the bios of a oc model of a different manufaturer).
Of course this would be at your own risk but also the solution.
Another solution would be getting rid of that ASrock board
By the way it is not the via chipset itself that is incompatible. The problem is it's limitation of pcie lanes. As it provides just an X4 PCIe-graphics slot that's a problem for the pcie 2.0 card. That's what MSI support seems to have not understand from your question. You don't have a regular PCIE 1.0 slot and that's why support's answer doesn't help you.

VIA AC97 Chipset in BIOS

Ive got an ms-6340 mainboard, and since formatting my HDD, have had to reinstall the drivers. Ive downloaded the approriaptes ones of the site, but when I try to install it gives an error message that says that VIA AC97 Chipset needs to be enabled in the BIOS. Ive looked high and low in the BIOS settings and cant find anything to do with this. Can any1 point me in the right direction? cheers

normally intergrated periphals

Any experience with USB 2.0 upgrade with VIA VT6202 chipset?

Hello,
I'd like to know, if anybody suceeded with upgrading his PowerMac with USB 2.0 PCI card, which has VIA VT6202 chipset?
I found some of them very cheap and in one e-shop there was a tiny notice about supporting OS saying - MacOS X supported! These cards are sold under different names but all of them have same "L" shape, 1 port inside and 4 outside and there is VIA VT6202 sign on the chip .
Btw I have Quicksilver 2002, 800MHz
Thank you for your answers.
Honza

Well, I've found some notices about cards with VIA chipsets and they aren't very good - NEC seems to be more reliable.
So again, does anybody have any experience with USB 2.0 PCI cards with NEC chipset?
Thanks

Little troubles with DVB-S2 via MPlayer

Hi,
I use the MPlayer already for quite a while to stream DVB-S and DVB-S2 with it. But for approximately two weeks something changed while watching HD-channels: the video track lags every few seconds; the audio track is quiet normal. However, the non-HD channels hide the problem.
E.g. while watching a German HD-channel, I find following terminal outputs:
[h264 @ 0xf2b820]mmco: unref short failure
[h264 @ 0xf2b820]reference picture missing during reorder
[h264 @ 0xf2b820]Missing reference picture
[h264 @ 0xf2b820]Increasing reorder buffer to 2
h264 @ 0xf2b820]Increasing reorder buffer to 3
[h264 @ 0xf2b820]Increasing reorder buffer to 4
[mpegts @ 0xeb3080]PES packet size mismatch
**** Your system is too SLOW to play this! ****
Specially this message I can't understand, because I'm using a CPU AMD Phenom II X4 955 3,2 GHz, 8 GB Corsair XMS3 DDR3 RAM and the graphic card ASUS GTX 460 Top GDDR5 PCIe 1024 MB. But, let's continue with the outputs:
[h264 @ 0xf2b820]concealing 880 DC, 880 AC, 880 MV errors
[h264 @ 0xf2b820]mmco: unref short failure
[h264 @ 0xf2b820]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
[h264 @ 0xf2b820]illegal short term buffer state detected
Furthermore I'm using two HHD WD20EARS, which are connected to RAID1 via 3ware 9650SE-2LP, and the DVB hardware decoder card Hauppauge WinTV-NOVA-HD-S2. My desktop environment is KDE SC 4.8.
For starting the DVB-S2 streaming I use szap-s2 -r -p -S 1 -c ~/.mplayer/hdchannels.conf "NAME-OF-THE-HD-CHANNEL" in one terminal and mplayer /dev/dvb/adapter0/dvr0 -demuxer lavf -cache 8192 in a second terminal.
I just mention all this stuff because I've absolutly no idea, what could be the reason. Before this troubles started, two weeks ago, everything worked flawlessly. Checking the /etc/log/pacman.log I can find out, that the Linux kernel was upgraded from 3.2.6-2 to 3.2.7-1 on 24th February. I'm not sure, but maybe since that time these failures appears. Presently I'm using Linux 3.2.8-1.
Has anyone an idea what might just be the cause? (Perhaps it could be a option to try the LTS-kernel?)
Last edited by maik-hro (2012-04-13 10:39:59)

So, today I just made some small tests. First of all I tried to start a HD-channel with WinTV7 on Windows 7: The channel was streamed correctly for almost one minute and than it was lost - and I had no possibilty to get it back.
After that I tried again to start the same HD-channel on Linux. I apologize in advance to the large amount of text but following is the terminal output of the first minute (finally canceled by STRG + C):
MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
183 audio & 398 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dev/dvb/adapter0/dvr0.
Cache fill: 17.97% (1507328 bytes)
libavformat version 54.2.100 (internal)
libavformat file format detected.
[NULL @ 0xf50700]non-existing SPS 10 referenced in buffering period
[NULL @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 10 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]mmco: unref short failure
[h264 @ 0xf50700]mmco: unref short failure
[h264 @ 0xf50700]Increasing reorder buffer to 1
[h264 @ 0xf50700]Increasing reorder buffer to 2
[h264 @ 0xf50700]Increasing reorder buffer to 3
[h264 @ 0xf50700]Increasing reorder buffer to 4
[h264 @ 0xf50700]mmco: unref short failure
[mpegts @ 0xed4800]Estimating duration from bitrate, this may be inaccurate
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (mp2), -aid 0
LAVF: Program 11100
LAVF: Program 11110
LAVF: Program 11120
VIDEO: [H264] 1280x720 0bpp 50.000 fps 0.0 kbps ( 0.0 kbyte/s)
Load subtitles in /dev/dvb/adapter0/
Cache not responding! [performance issue]
Cache not responding! [performance issue]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 54.8.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Unsupported PixelFormat 81
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Increasing reorder buffer to 1
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 1280x720 => 1280x720 Planar YV12
A:61580.2 V:61580.9 A-V: -0.639 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 50%
[h264 @ 0xf50700]reference picture missing during reorder
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]mmco: unref short failure
A:61580.3 V:61581.1 A-V: -0.742 ct: -0.004 0/ 0 ??% ??% ??,?% 2 0 50%
[h264 @ 0xf50700]Increasing reorder buffer to 2
[h264 @ 0xf50700]Increasing reorder buffer to 3
[h264 @ 0xf50700]Increasing reorder buffer to 4
[h264 @ 0xf50700]mmco: unref short failure
A:61585.5 V:61586.0 A-V: -0.430 ct: -0.490 0/ 0 86% 7% 0.7% 125 0 50%
[mpegts @ 0xed4800]PES packet size mismatch
A:61585.9 V:61586.3 A-V: -0.400 ct: -0.520 0/ 0 85% 7% 0.7% 125 0 50%
**** Your system is too SLOW to play this! ****
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
A:61589.5 V:61587.1 A-V: 2.333 ct: -0.432 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61589.5 V:61587.2 A-V: 2.334 ct: -0.430 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61589.5 V:61587.2 A-V: 2.332 ct: -0.428 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61592.2 V:61589.9 A-V: 2.242 ct: -0.422 0/ 0 58% 5% 0.9% 125 0 50%
[h264 @ 0xf50700]mmco: unref short failure
A:61592.6 V:61590.2 A-V: 2.438 ct: -0.396 0/ 0 61% 5% 0.9% 131 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
MPlayer interrupted by signal 2 in module: decode video
MPlayer interrupted by signal 2 in module: enable_cache
A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
Exiting... (Quit)
Starting the same channel in SD I get these feedback:
MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
183 audio & 398 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://ARD.
dvb_tune Freq: 11836000
Cache fill: 17.58% (368640 bytes)
TS file format detected.
VIDEO MPEG2(pid=101) AUDIO MPA(pid=102) NO SUBS (yet)! PROGRAM N. 0
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 15000.0 kbps (1875.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 54.8.100 (internal)
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[VD_FFMPEG] Trying pixfmt=0.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=1.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=2.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 720x576 => 1024x576 Planar YV12
A:36766.2 V:36766.2 A-V: -0.001 ct: -0.332 19241/19241 14% 2% 0.7% 9 0 49%
I will not get rid of the feeling that it might actually be due to faulty input signals. May something's wrong with the satellite system (LNB, multi switch, something else)?

TV @nywhere Satellite II PCI Card - low profile bracket?

Hi,
I have a low profile Antec Minuet case which only takes low profile bracket cards.
Can I make the TV@nywhere PCI Satellite II card fit in my case? It looks small enough....
Does it come with dual size brackets or will I be able to adjust the bracket to fit?
Please help - I really need to get Satellite into my case but cant find any Low Profile cards...
Also, can someone confirm if TV@nywhere PCI Satellite - the original version - allow me to receive HD satellite channels? Not too fussed about recording - just want to view HD Satellite? This card is easier to obtain in the UK - the new II version is harder to get hold of.
Thanks!

Hi Bas,
thanks for your answer.
DVB-dream is a software to view tv on your PC. I want to watch blueray, radio, tv, watch pictures,... -> HTPC.
For this MCE is a nice standard software. I thing the problem is not MCE but MSI! After the message "... no signal.." the MSI software have to be start under admin rights to work. For me this is a hint to a bug in the msi driver.
Darius

No sound on LCD TV when Satellite A200 is connected via HDMI

The problen is: I connect notebook (A200) to LCD TV (Philips) by HDMI. The video is OK, but sound stay on notebook not in LCD TV.
May be the problem is HDMI 1.2 does not support sound and video together? Only 1.3?
Sorry for my English

Sound should work with every HDMI cable as far as I know. Have two of them, one with HDMI 1.3 and another one, which I don't even know, but I guess not the 1.3 standard, as it was pretty cheap.
To enable sound via HDMI you will have to go to control panel - sound. There select the digial output device as standard. Make sure you have closed the media player or any program which has sound output before. Then start player again and sound should now be heard through TV.

How to install SATA on VIA K8M890 chipset board

Hi,
When trying to install winxp - the installation doesn't recognize my sata hd.
I didn't receive any diskette with my compute.
Does anyone have any suggestions?
Thanks,
Gidon.

Is the Hitachi drive a SataI or SataII.
Here is the Info MSI gave;
On-Board SATA
• Two SATA ports by VIA® VT8237A
- Supports storage and data transfers at up to 150MB/s
- Supports RAID 0, 1 and RAID 0+1
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
So according to that the SATA Controller is a SataI and your drive must be set to that via the jumpers if it is a SATAII. The only thing you should need the floppy for is RAID. The Floppy is optional so it looks like it does not come in the box.

Anybody using a Via KT880 chipset?

I'm looking to build my girlfriend a cheap Socket A system (I already have lots of spare DDR memory and Athlon XP CPUs) and was looking at a Via KT880 motherboard. Does anyone have experience with this sort of board? Pros & Cons?

Just an update:
I've been using this chipset now for a few weeks and have to say that it's much better IMHO than nForce2 in terms of linux support. The newer kernels have great support for even the gigabit ethernet connectivity and sound. The snd-via82xx module seems much more feature complete than the snd-intel8x0 you're forced to use with nForce2 if you want ALSA. The Via module also seems to support hardware accelerated mixing on this platform where the intel8x0 driver didn't support hardware mixing (because nVidia would not cooperate with technical details) at all.
So, I have considered this an upgrade.

Sata Raid problems with MSI KT4 Ultra Via kt400 chipset

ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
it comes up with my irq settings are wrong
my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
would help lots thanx

you dont need multiple threads on the same thing

[VIA Series] MSI PT8 NEO ( Via PT800 Chipset Based) LAN Adapter Problems

Device mangager says the onboard VIA Rhine III Fast Ethernet Adapter cannot start and gives it a "code 10" error.... i have tried doing what it says in the trouble shooter like uninstalling and reinstalling but to with no success.. Please help! Thankyou

Porblem solved!!! just needed a format and reinstall... wat a pain.. but ow well it works!!
Thankyou to all who have helped

Via Hyperion chipset drivers for K&t266 Pro2 MS 6380

hi all
Having recently re installed XP to new hard drive thought I should update the VIA chipset drivers so have installed 4in1 Hyperion 451v.
Am having some lock up problems transfering files from 1 hard drive to another on the same IDE channel.
Power supply problem identified and new Antec on the way.
Looking for some opions guidance around standard XP drivers vs Via and as this is quite old board should I be using retro Via drivers for stability.
Views, thoughts experience appreciated.

Some kt266 chipsets requires the VIA latency patch.
Fixes file transfer issues, corruption and stability issues.
Improves PCI bus transfer rates and crackling sound issues.
you might want to look into this.

VIA KT880 chipset

Hey folks!
I was just wondering, if MSI plans to launch a Board w/ VIA's KT880 chipset. The specs I've seen were very nice looking at.
And if so, when will it be launched?
sj

Yeah, sorry! Used the searche function AFTER I wrote this!
Sorry! :hypecrite:
sj

TV @nywhere Satellite II DVB-S2 VIA VT6112L Chipset

Similar Messages

Maybe you are looking for