TV preview monitor shows "wriggled" top part

I just bought a separate TV monitor, connected to Firewire via my Sony DVcam
When I play back sequences, the top 10% of the TV screen 'wriggles'
The rest of the picture is fine.
I use a S-video connection between the DV cam and the TV monitor andI use PAL 25fps
Is this related to the output from FCP? or is this a problem with the TV monitor (brand new flatscreen LCD monitor)

Or the signal generated in the camera, converting the FW info to a video signal. In all my experience, FCP just sends out a datastream via FW. Not a video signal. So I would look at your camera. Try a test with another camera / video converter.
Patrick

Similar Messages

  • Print preview not showing values correctly. (single words are omitted)

    Hi,
    When viewing print preview of ME23n , it does not shows the values correctly.
    It omitting the single words.
    If its having 2 or more words, it displaying correctly
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    Any ideas how to resolve this issue?
    Is there any thing to do with printer settings & configurations / netweaver admin point of view?
    Best Regards.
    Zerandib

    Hi Zerandib,
    By the way , since its a standard program, i think that code is out of our scope.
    Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
    You may please check upon the same.
    Is it possible to check the results on a system where patch has not been applied ?
    Regards,
    Deepak Kori

  • PrE11:  Project Assets box hides part of Preview Monitor

    When you select the Adjust or Applied Effects buttons the displayed menus convienently slide the Preview Monitor to the left.  When you select the Project Assets button and the menu drops it partially hides the Preview Monitor.  It can be more or less depending on the adjustable size of the Project Assets menu.  The Preview Monitor does not move out of the way like with the Adjust or Applied Effects menus.
    Can the Preview Monitor be somehow moved or made to move?  Can the Project Assets box be moved?
    Windows 7 64 bit
    PrE 11 64 bit
    16GB ram
    17" monitor
    Thanks.
    Bill

    John T Smith wrote:
    Is your monitor set to AT LEAST the minimum of 1024x768 display resolution? http://www.adobe.com/products/premiere-elements/tech-specs.html
    1920x1080
    The computer has a NVIDIA gpu, but I can't how or if tell if PrE actually uses it.
    Here is what it looks like two ways:
    Expanding the time line window will shrink the Preview Monitor enough that it does become 100% viewable.
    Message was edited by: whsprague to provide screen shots.

  • Monitor shows no signal pavilion m9520 elite desk top

    Pavilion m9520f elite. on start up monitor shows no signal.  tried 2 different  monitors  both of which work with other computers, also different cables.  receive beep code of 2 short then 5 when powered on.  these codes are not found hp website. could this be the video card defective? thanks rgh202

    Hello jgoh,
    I understand that your display is black.
    It sounds like the graphics card may have gone out.
    Turn off the computer.
    As you power it back on tap the F8 key to load advanced diagnostics.
    Select safe mode.
    Check to see if the computer will load windows.
    You may need to take the computer some where local and have them check out the card.
    Let me know how everything goes.

  • Preview prints lose the bottom part of the page

    Yesterday, after doing an update (which only updated iTunes, so it's probably not what caused the problem), I found that all print jobs from Preview (and a few other programs that I've tried) are missing roughly the bottom 1 cm of the page.  I've grovelled through all the settings and preferences that I can find, and I've made various other things change, but no matter what I do, nothing makes the bottom line of text appear on the paper.
    Preview shows all the text, including the bottom line, and when I use the "PDF" button to "Open PDF in Preview", it shows the page with the bottom text.  But when I print the page, the bottom line is blank.
    The printer is remote, controlled by CUPs on a machine down the hall.  When I scp a PDF file to the server and print it there, it prints fine, and the bottom lines are always included. Then when I go back to my Macbook Pro and print exactly the same PDF file on the same printer, the bottom line is again missing.  This shows that it's not a problem with the printer or the server's CUPS software; it's gotta be something on my Macbook Pro that changed.
    The usual disclaimer applies:  I haven't (knowingly ;-) changed any print-related setting recently.  (We've all heard that one before, right? ;-)  Since the problem appeared, I've of course changed lots and lots of settings, trying to find something that affects the problem.  But the most recent change before this problem appeared was a couple of months ago (when another upgrade broke all remote printing, and I had to delete all the printers and reinstall them). 
    A possible clue is that, when I use Safari to load a PDF from http://localhost/..., the page shows as usual, and I get the same drop-down from CMD-P that shows a preview that has the entire page.  But when I print it, the entire page is shifted vertically so that the top title line of text is missing - and the bottom line has only its upper half, with the bottom part of all the characters missing.  Again, the blank strip at the bottom is roughly 1 cm.  Actually, a quick check with a ruler says that it's 12 mm.  But I don't know how to use this info, or how to tell Safari to fix the missing title line.  The missing bottom half of the bottom line seems to say that it's not that the PDF has something wrong that suppresses the text entirely; it would seem to say that somebody is deciding to impose a 12-mm bottom border for some unknown reason.
    Any idea where I should look to fix this problem?  Is there a relevant troubleshooting guide somewhere that I should know about?
    (It sure would be nice to have a known way to say "Just print exactly what's on the Preview page; don't try to do anything clever with it." ;-)

    That doesn't sound quite right.  Tests on the server shows that the printer (HP L7680) can in fact print up to within 3 mm of its edges.  The test pages show this, and assorted tests with "real" PDF pages in the past have verified it.  It worked from my Macbook up to a few days ago, and tests from the server show that the printer hasn't lost the ability to print close to the edges.  In fact, my wife printed a page from her iMac a while ago, and it showed stuff (images and border lines) up to about 4 mm from the edges.  It's only from my Macbook Pro that suddenly the bottom 12 mm gets blanked out. 
    Actually, I did try a test from the server with the "borderless" setting.  The software enlarged the image to be bigger than the page, for some reason that I don't understand, but the result was that the printer printed right up to the very edge of the paper; there was ink visible on the edge of the sheet.    So the idea that the printer "can't" print close to the edge is wrong.  The printer doesn't have a problem here; it's being told by some software on my Macbook Pro to blank out the bottom edge. 
    I just tried another test of this:  I told Preview on the Macbook to print the page at "Scale: 120%  ", and checked "No automatic page scaling".  Preview showed the text going off the page at the top and right edge,  The ink stopped about 3 mm from the top and right edges.  But the bottom 12 mm, including the bottom line of text, was blanked out.  This, plus the tests on the server, shows that the printer can print up to 3 mm from the edge of an 8.5x11 inch page.  And earlier tests that produced the bottom line with only the top half of the characters shows that it isn't just dropping the bottom line; Something on the Macbook is explicitly blanking out the bottom 12 mm (but not doing the same on the top and right edges.
    And whatever is doing it doesn't happen on my wife's iMac; she can print close to the bottom edge.
    I'm now wondering if I should uninstall the printer on the Macbook, and see if I can reinstall it to match the iMac's settings.    But if the problem is something in the Macbooks system libraries that's forcing the 12-mm bottom margin, that probably won't work, either, and the "Letter" paper size settings presumably come from some library file, because it won't permit me to change those numbers.
    Anyway, I'll try your suggestions, probably in the morning, and see what happens.
    About the Borderless type:  I find that when I try setting the Paper Size to "US Letter", it gives me another menu, with "US Letter" and "Borderless 8.5 x 11 in." entries.  If I choose the Borderless, it pops up a window with a warning that this is only allowed for HP Premium Plus Photo Paper, which is in what it's set to.  It says it's "not available when Paper Type is set to Plain Paper", which it won't allow me to do.  (That choice is greyed out.)  It seems odd that it would warn me that it won't work for a setting that it won't let me use anyway, and say that I must use the setting that I am using.  Anyway, I've tried this "Borderless 8.1 x 11 in." setting, and it comes out the same as the "US Letter" choice, with the bottom 12 mm blank.  Both print to nearly the top and right edge if I set the Scale to 120%.
    (And that damned "Automatically rotate each page" is checked again. ;-)

  • Is there a way to default the monthly calendar display so that the current day always shows on top?

    Is there a way to default the monthly calendar display
    so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
    is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
    but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks. 

    Thank you!
    Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
    I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
    three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
    in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
    flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
    even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
    format until Outlook programmers add this Technology Age feature in newer versions.  
    See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
    since last week or the week prior.  
    If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
    Thanks again in advance!

  • Satellite A100-646 and external monitor shows black screen

    Hello to everybody,
    I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week without any problem.
    Unfortunately, there is no proper service in a place where I live. Perhaps, there is a problem with power supply.
    Is there other idea? Does anybody have a service manual? ([email protected])

    It is not easy to find shop where you can order original and new hardware components.
    Best source for such parts is definitely eBay where you can buy used but well working components.
    Upgrade? You must know that upgrade on mobile computers is not the same as on desktops. Cooling possibilities are not the best and each notebook model has optimized cooling system for original parts. So new graphic card can be more powerful and produce more heat and it is definitely not good for your notebook. So best thing you can do is to replace it with original part.

  • Audio is Out of Sync on NTSC Preview Monitor

    Hello FCP Gurus,
    I recently was hired by a local Broadcast TV Affiliate and I am looking at their FCP systems. I noticed that one of the suites has a big problem with the NTSC Preview Monitoring, the audio is way out of sync.
    Here's the set up:
    G5 Dual 2GHZ
    3GB RAM
    1 Internal Western Digital SATA 160GB (System Drive)
    1 Internal Maxtor SATA 300GB (Media Drive and back up system drive)
    2 Monitors
    MAC OSX 10.4.3
    FINAL CUT PRO 4.5
    AJA IO LA
    So when I play back anything in the timeline the audio on the external NTSC monitor is way off, not just a little bit but a ton. I am not sure why. I know that usually there is some delay but not this much. Is there a way to configure it without any delay? The computer monitor with the FCP canvas and viewer are dead on but the NTSC is way off, it is ahead of the video.
    Also, when I am editing in the timeline I have to switch the AV setting from ProIO to Built In and then I can here it. When I insert back to BetacamSP through the AJA box I have to switch it back to ProIO to lay it to tape. While it is laying to tape I cannot hear the audio or even see the FCP meters. But when I play back what I just put down on the Beta deck, the aduio is fine. The decks are in the operations rooms almost on the other side of the building.
    This maybe OK for 30 sec promos but for 30 minute shows this will drive me crazy. I am responsible for all elements, including audio.
    Thanks in advance.
    Alex

    make sure the audio is following the video.
    if you are viewing video on an external monitor, make sure the audio is routed [i[the exact same path to the audio monitors. If you have the video going out through the AJA and the audio out directly from the computer, there will be a processing differential that you will hear as lag.
    Also, make sure you have the most recent AJA drivers.
    good luck.
    x

  • Video playback in preview monitors appears as a jagged mess

    Video playback in the preview monitors appears as a jagged mess. The audio plays perfectly. I am using Premiere Pro CS4 4.2.1, only DV NTSC. I have checked all my settings, have found nothing that will fix this. What could be causing this problem?

    More computer information might help... http://forums.adobe.com/message/4200840
    Especially the exact brand/model of your graphics adapter (ATI or nVidia or ???) and the exact device driver number
    IF you have an nVidia card...
    Right click in any open area of the Windows desktop
    Select NVIDIA Control Panel from the popup window
    Select SYSTEM INFORMATION at the lower left corner
    Driver version should be the 1st line in Details
    >checked all my settings
    A screen shot works well to SHOW people what you are doing http://forums.adobe.com/thread/592070?tstart=30

  • PE9 loading achdv files no problem, but playing them in preview screen shows lot of distortion

    Hello everyone,
    We bought pe9 to be able to edit hd files. Loading them and editing them works perfectly, But when you play them back in preview screen or full screen the movie is blurred and shows a lot of distortion. This happens to every file we load in PE9, avi, mts, mov etc. When the movie is stopped, the preview screen shows a sharp image, but when playing it starts blurring and becoming unsharp. Rendering does not help. Removing flickering helps a bit, but not enough.
    We tried the solution for the interlacing but it does not help. This way we can't go on!
    When burning them to dvd, same problem still exists.
    Any suggestions?
    When playing the same files in for example Nero, a sharp view is no problem.... how come PE9 distorts the image?
    Best regards,
    Mandy

    Most likely your Project Preset and footage may not be matched.
    Right-click your monitor panel and check that magnification is set to 100% and not 'Fit'. We have set it less than 100%
    Where have these clips come from and what format are they? Format .mts files, but also avi, does have the same problem
    What Project Preset are you using? We selected one, than the program said it did'nt fit and asked if it could adjust it. So we did.
    When you import the footage is there a red line above the timeline? no there is nothing to render, no red line.....
    PRE is an editor, a very different beast from the Nero player. Yeah, we understand, but PE9 should be able to play these files and export them properly, why else buy it?

  • Lost Preview monitor in log & Transfer

    Hi,
    I'm logging footage in Log & Transfer and have lost my preview monitor. All footage is there.Can anyone help?
    Jeff

    Hi -
    Are you trying to import XDCam footage from a camera storage card? Log and Transfer is not the way to do it.
    You need to use Sony's XDCam transfer software to import the footage.
    Some of the clips show partial, because they are larger than the file size limit of the card, and the complete clip spans multiple individual files - if you use the Sony XDCam software, it will join the partial clips automatically.
    Unless I misunderstand what you are doing . . . .

  • Preview monitor problem

    Hello, so I have an issue with preview monitor in Premiere Elements 10.
    Video I am editing only shows when I click into the monitor, If I want to play the whole thing than the frame is frozen and audio plays fine.
    I've reinstalled everything to double check, even OS Win7. Problem still exists. This makes the editing just not possible.
    This problem is aslo happening with all video formats(avi,mp4,mov,png, even jpg). The only thig that seems to work is content generated within premiere(bars,titles,color backgrounds).
    Thanks for any help.

    Karandeep
    I did not write the "same" thing. Let me explain.
    I cannot explain how protomace found your "preferences" directions and what was found. But, you are not going to find the Premiere Elements settings file (aka preferences) by the route that you posted. For the advantage of this user and others reading this thread, I thought it important to call attention to this.
    Specifically
    1. You wrote
    Go to below mentioned location and reset the folder named as 10.0 and try to launch premier elements
    c:\Users\[username]\AppData\Roaming\Adobe\Premiere Elements 10.0/10.0
    There is no Premiere Elements 10.0 Folder in the correct route.
    In that Adobe Folder in that above path, there is a folder named Premiere Elements 10.0 which also contains a 10.0 Folder, but that is not where you want to be if you are interested in settings file (aka preferences).
    2. I thought that you might want the opportunity to be more specific for the benefit of this user and others who might read your post(s).
    a. "reset" was not defined by you
    b. other as per my post 5.
    Thanks for the opportunity to clarify these points for you.
    Please do not hesitate to ask if you have further questions on this. Please double check the path that you cited versus the one that I did and compare. With the path that you gave, I think that you would end up with a Trace Database.txt file. How were you planning on resetting preferences from that?
    Thank you.
    ATR

  • Get 2 screen in monitor,1 in top, 1 in bottom

    ckick on video,like youtube or any video clip ,will get 2 screen in monitor,1 in top, 1 in bottom

    The DPS team is aware of the inline video issue you mentioned. There should be a fix in v25 (tentatively scheduled for early February).
    There is a page that shows the bug fixes and indicates ongoing critical bugs that require a hot fix, but it doesn't provide a complete list of reported bugs.
    http://helpx.adobe.com/digital-publishing-suite/release-note/dps-bug-fix-release-notes.htm l

  • How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

    How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture.  Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

    Homestly haven't a clue what's going on there. 
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • When printing on photopaper with HP PSC 1510, the top part of the print does not print.

    When I try to print on photopaper with PSC 1510, it does not print the top part of the print - the paper seems to get feeded well. It looks like it somehow moves the printing area 10 cm higher on the document, so the pictures are cut in the middle and the top part is not printed. This varies - printing using the Windows image preview didn't cut off as much as Open Office's Writer.

    As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

Maybe you are looking for