Two Apple displays not possible with Nvidia 7300 GT (bug?)

I have a Mac Pro with a Nvidia GeForce 7300 with an Apple 23" display connected to it.
Yesterday I wanted to hook up a second 20" Apple display to it and it was simply not possible because the two sockets on the graphics cards are so near to each other, that the plugs of the displays obstruct each other.
So I can't plug in both displays at the same time.
Any ideas how to solve this?
Thanks!

I was curious, so I tried connecting a second dvi cable to the 7300 on my Mac Pro. It fit fine, with no problems.
I checked my collection of cables, and the few DVI cables I have, all fit with both connectors on the video card occupied.
The only thing I can think of is the DVI cable you are using is oversized, or has more likely some plastic tabs left over from the molding process that are getting in the way.
Tom N.

Similar Messages

I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

Some things are mixed up here, seemingly...
I seem to have two Apple ID's attached to my e-mail.
An Apple ID is a valid email address, apparently. How can those be "attached to your email"... what email?
Facetime will not verify my e-mail address because it is associated with the other account.
This doesn't make sense. You can register multiple, even non-Apple-ID, email addresses and their aliases with FaceTime.
So, maybe you can explain your problem better - what you want and the steps you've taken and what you have so far. If something doesn't work, please tell the exact error message, too.

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

See if this helps : http://support.apple.com/kb/TS3694#error3194

I need to generate a still shot from from a video. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase.

I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.

For FREE do the following:
When you get to othe part of the video you want a still shot from, put the video on pause.
Take a screen shot: Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab. Will do the above with just a single click.
If you still want to purchase software, suggest that you do a Google & MacUpdate search. This way, you can find exactly what you want.

Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

Running two Apple displays from one Macbook Pro?

I have two Apple displays with mini-display ports. I have ONE Macbook Pro with ONE mini-display port. Problem.
I purchased this USB 2.0 to DVI Display Adapter from Monoprice but still can't figure out how to get my mini-display ports to work with this.
Is this even the right product?

You can use another DVI, VGA, or even HDMI display for far cheaper with this adapter, US$60 plus shipping:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Warning: Results may be unacceptably laggy.
But a converter to Mini DisplayPort is quite expensive, US$150 plus shipping:
http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html

Is the new maverick download not possible with the version lion?

Is the new maverick download not possible with the version lion?
My version is:
Mac OS X Lion 10.7.5

Should be, you can compatibility here:
http://support.apple.com/kb/HT5842

Multiple usage of Source System is not possible with installed DMIS version on source

Hello folks!
I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
I`ve deleted one connection and after that I`m trying to create new one through Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
"Multiple usage of Source System is not possible with installed DMIS version on source".
But there`s no any adjusted connection in system now..
Please, help me to understand how to fix that problem, I can`t find a solution

Hi,
When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
Thanks
kris

Non-cumulative initialization is not possible with historical data

Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.

You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

Goods movement not possible with mvmt type 991

Hi,
            As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght       =   gt_outtab1-gr_wght.
   MOVE: gt_outtab1-matnr            TO gt_item-material,
          gt_zseed_po_qty-werks       TO gt_item-plant,
          gt_zseed_po_qty-lgort       TO gt_item-stge_loc,
         '901'                        TO gt_item-move_type,
          gt_outtab1-gr_wght          TO gt_item-entry_qnt,
          'B'                         TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor,
          gt_outtab1-ebeln            TO gt_item-po_number,
          gt_outtab1-ebelp            TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
          gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '991'                        TO gt_item-move_type,
          gt_outtab3-bqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
         gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '942'                        TO gt_item-move_type,
          gt_outtab3-pqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = gs_header
      goodsmvt_code    = gs_code
    IMPORTING
      goodsmvt_headret = gs_headret
      materialdocument = gs_retmtd
      matdocumentyear = gs_year
    TABLES
      goodsmvt_item    = gt_item
      return           = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarun

Hi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind

Goods movement not possible with movement type 702

Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
Pri

DEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA

Apple tv not working with panosonic TH-50PX75U old.

Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

KANBAN - STO (error : Goods movement not possible with mvmt type 351)

Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
Pavan

Hi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan

Two Apple displays not possible with Nvidia 7300 GT (bug?)

Similar Messages

Maybe you are looking for