Two choices for System Selection in SMD Setup Wizard

Hello,
we started to install the SMD. First everything was fine, but now we can select two agents for one system in the setup wizard.
The correct system is green lighted because the setup was successful. The other wrong system is not configurd and so the hole system in the overview is grey.
What did we wrong. Can anyone help us???
Thx
Thorsten

Hi,
Login in to solman smd,
Diagnostics Administration - Landscape Management - Select u'r solution- drill down to the instance & delete(right click).
That should do.

Similar Messages

Two Keychains for System & other Keychain questions

I noticed that in the Keychains pane of Keychain Access there are two keychains for "System". They are separated by a keychain called "X509Anchors".
The two System keychains appear to have exactly the same items: AirPort network passwords and a "Dashboard Advisory" certificate.
Any reason I need two identical System keychains?
Also:
1. Can you rename a keychain?
2. Can you re-order the list of keychains?
Thanks.
- Winston

I was having the same appearance of 2 System keychains on my MacBookPro and never realized why (it was not on the other machines). Today when searching the web for some other problem I found somewhere: if you open keychain access and go to the Edit menu you find an item called "Keychain List". If you click on it a drop-down sheet opens where you can choose between "User" and "Mac OS X (System)". Under "User" you get the keychains which are listed for you. There I had my login keychain, 1Password keychain (that's from a third party application), and System keychain (with a checked box in the Shared column). Now I was brave: I highlighted the System keychain and clicked on the minus sign in the left corner (I thought this may just have an effect on the listing itself, without deleting the keychain). The very same time one of both System keychains in the Keychain pane disappeared. I closed Keychain Access, opened it again and went to Keychain list. Now there is again a shared "System" keychain visible, but on the Keychain pane there is still only one listed!

System shows wrong product version in smsy and SMD Setup Wizard

Hi
We have a SOLMAN EHP1 SPS22 running. The Satellite systems are correctly registered in SLD, also the SOLMAN Fetchjobs is running successfully.
I wanted to run the SMD Setup for a NetWeaver ABAP system, when I click in the Setup Wizard on the System the following link is under Managed Products apears: [NOT DIAGNOSTICS RELEVANT] .
By clicking the link you get the products to be managed, but i only two products are for selection.
SAP ERP 6.0 and SAP FSCM 6.0.
In smys checked the assignment in Systems --> <SID> in the Header Tab I clicked Installed Product version. The List in the Pulldown menu in "Product" are the same as above: SAP ERP 6.0 and SAP FSCM 6.0.
I tried to assign the product manually with no luck. Running the Solman_setup for the Diagnostics did not solve the problem either.
Thanks for your help
Murat

Hi Stuart,
In SolMan, goto t-code SMSY-> Product Definitions-> Select any product.
On the right hand side, click on the button "System Roles"-> Click "Select Product".
Now activate the relevant product as required by clicking on the "Active" checkbox.
Hope this helps!
Regards,
Rinkal

All of a sudden TWO choices for Restart and Shutdown and other issues...

I noticed today that there are now TWO choices in the menu for Restarting and Shutting down for my iMac.
"Restart...
Restart
Shutdown...
Shutdown"
Nothing new has been installed.
Also, now there is a black rectangular outline around anthything that is "selected" on the desktop or in a menu.
My mac mini has also started to act weird all of a sudden. Watching Netflix today, the entire display get s horizontal colored lines and the computer freezes. I have to hold the power switch to turn it off. When trying again, it does the same thing after a few minutes.
Any ideas?
Any help would be appreciated.
Message was edited by: ihans

The imac problems have been solved.
The Voice Over Function in the preferences was turned on somehow. This caused the duplicate restart and shutdown issue, and the black box around highlighted items.
Now If I can figure out the Mac Mini issue. I hope it's not dying on me...
Message was edited by: ihans

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

EFWK SMD Setup Wizard

Hi Fellows,
as "User Guide - End-To-End Change Analysis"
https://websmp107.sap-ag.de/~sapidb/011000358700000742402007E
at topic 2.2 promises the EFWK to offer "an API for the Setup Wizard of Solution Manager Diagnostics (SMD) which will activate all relevant extractors based on how a system was modeled in transaction
SMSY" I would like to use it.
After doing some research I still haven't found out how?!
Anybody out there who knows more about this Setup Wizard or has any link for me?
Many thanks in advance.
Best regards
Tobias Fickinger

Hi,
Login in to solman smd,
Diagnostics Administration - Landscape Management - Select u'r solution- drill down to the instance & delete(right click).
That should do.

HT1414 I am trying to unlock my iPhone 4S per the AT&T instructions. I have it backed up. In iTunes, I have two choice for RESTORE. One is restore iPhone and the other is restore Backup. I do NOT want to upgrade from iOS5 to iOS7...which Restore shoul

Any ideas on the topic above?

Isn't going to matter what you want. To complete the unlock you have to restore. When you restore it will install the new iOS. You cannot change and/or prevent it.

Should I combine two 1Tb drives into one logical 2Tb drive or use one 1Tb drive for system/apps and move /users to the other 1Tb drive? (I'd like ease of b/u too.)

Hello,
I have two 1Tb drives in my Mini, the first is full and the second one empty. (I've been using the 2nd for Time Machine but the full source from dirve 1 soon has Time Machine complaining.) I am contemplating whether to form one 2Tb logical drive from the two 1Tb drives or segregate their use, i.e. use the first 1Tb drive to hold the system and applications while moving the /users directory tree to the second 1Tb drive?
I'm assuming both are straight forward to do accomplish but have nagging doubts about segregating drive usage, will moving the /users directory tree to the second 1Tb drive:
impact apps which might otherwise expect to see particulat fies and directories in specific user related locations on the system drive;
hinder backing up (by having to setup two separate Time Machine activities)?
Finally, is there a better 3rt option?
Thanks,

Thanks and sorry Allan,
The supplementary questions would arise should I NOT chose to combine the separate drives into a larger logical one but to keep one of the two drives for system/apps and the other for users data... I assumed that segregating drive usagel like this might reult in issues with apps which might expect to see some user directories/files on the same drive as the system/apps. similarly, with two physical drives, I'd be looking to managing separate Time Mchines. (I have a few 2Tb pocket drives for backups.)
Final question - if I do combine into a single logical drive (for system, apps, /users ... the whole lot), would I have any problem getting this logical one working from a Time Machine backup? I ask that this backup was taken from the 1Tb physical drive and now I'd be looking to put it back onto a 2Tb logicl drive.
Thanks,

Multiple choices for User's Profile& Preferences System Code for GSM ?

Hello,
I’m LauraJ and I have a question regarding users being able to see in GSM the item codes for specifications entered by other business units users.
When this user is making a generic search in GSM for the common specifications shared by multiple facilities, on the search page he/she is seeing only the system code from its facility; the codes entered by sister facilities users for the same specification are visible only if he/she opens the spec.
I tried to change this into User’s Profile& Preferences System Code for GSM but I can choose only one option. How can I select multiple choices for System code?
thanks in advance!

In GSM and SCRM, you can only select one preferred System Code. But you can create an Enhancement Request for use to allow multiple.

Unfortunately, Setup Wizard has stopped...

Hello everyone,
I've got a Pantech Marauder that I'm handing down to my step-son; I did a factory reset to clear the apps and data, went through the setup process to verify that it worked, made sure the phone was active, and did another factory wipe so he could start fresh.
Now, at the language selection in the Setup Wizard (first option), I get the "Setup Wizard has stopped" error, and it won't let me progress. I can access the menu system through the pull-down at the top, but can't get into the phone. The SIM is recognized, and I can even text and whatnot -- I just can't get into the UI itself.
<Comments about rooting and hacking of any device removed per the Verizon Wireless Terms of Service.>
Any help is greatly appreciated!
Message was edited by: Verizon Moderator

Marquia,
Thank you for the response, albeit a little late. I actually contacted VZW customer support, who then contacted Pantech support, and they just exchanged the phone for me; none of the local resets worked, and the CSR attempted a reset from his end that wasn't successful either.
I likely didn't fully complete the setup wizard before I did the second wipe, which may have corrupted the APK, but I don't know for sure. Regardless, VZW got the replacement out to me overnight, and the new one works like a champ.
Thanks again!
(Oh, and I apologize for the rooting comments; didn't realize they were against the TOS)

Security Setup Wizard keeps appearing on startup

For some reason, the Security Setup Wizard keeps appearing everytime I logon. There seems to be an error when it is completing the last steps of the process. I enter all the information requested and get to the last page and I get an error message that it cannot create the "system keys." What are the system keys and how do I fix this error?
If I cannot fix the error so that the wizard can complete its tasks, how do I prevent it from running on startup in the first place? I checked the run list in the registry but it doesn't seem to be listed there.

Hi sclexman,
Thank you for your good instructions and prompt reply. I don't often see such patient or helpful people outside of the ThinkPad community!
My system has been running beautifully for well over a year.
I am running Windows XP Professional on my IBM ThinkPad T60p.
Typing something like ThinkPad "Security Setup Wizard" into Google with quotation marks, you will get better results.
I literally get exactly what is described above by the other people.
My problem is the Wizard which keeps popping up every time the computer restarts, but the "system keys" step is where the wizard gets stuck, so I thought that might be the cause of the problem.
I put off setting up my security software with fingerprint reader for years, and I just got around to it yesterday. The wizard popped up every time I started up since I got it, but when I went through the wizard and set everything up, it finally stopped popping up.
Shortly after, I went poking through the advanced settings of the ThinkVantage Client Security Solution program and accidentally clicked "Reconfigure security settings". This brought up the same wizard again, and made me re-enter all of my passwords and security questions, which was quite a hassle. This is the time it failed at the "system keys" part of setup; the first time took longer, but it was successful.
My big reward at the end of this was supposed to be the wizard leaving me alone at startup, but he will not stop his familiar haunt!
Any help is appreciated.
Thanks,
Thomas
Security Setup Wizard that won't stop popping up:
Wizard after initial successful completion. If done over, it won't get past the second step.
I don't want to try creating my own system key as your WikiHow link describes, as I'm not entirely sure what I'm doing, and I don't want to actually break my system's security! Everything is working perfectly now security-wise, except for this pop-up window!!!
P.S.
I took so long to reply because when I tried to change my e-mail address to the one I check most often, I was completely locked out of my account. I did not receive any confirmation e-mail no matter how many times I clicked re-send. Today I changed it back to my Hotmail account, and it came within five minutes, so I'm back in. Since Hotmail works, I am guessing that the spam filter on my school's e-mail servers is cranked up too high, rather than any problem on Lenovo's part.

What's happening on my iMac? There are two choices of selected start up disks appearance without hold down option key. On the other hand, it start up normally show apple picture when I hold option key.

There are two choices of selected start up disks:Main HD and Recovery HD, appearance without hold down option key. On the other hand, it start up normally show apple picture when I hold option key.

Hi artdiva28
Welcome to Apple Discussions
First go to *System Preferences > Startup Disk* > select the *Mac OS X 10.5. on Macintosh HD* > click the Lock > hit the Restart button.
Then if the iMac is still having trouble starting up, insert your Install Disk and restart holding the Option key. In Startup Manager select the Install Disk and boot into it, choose your language, skip the Installer and go up on the menu bar to Utilities and open Disk Utility. In Disk Utility select your Macintosh HD and hit the Repair button. Once finished note any errors and what was repaired for future reference. Quit Disk Utility and restart once again holding the Option key boot back into the Macintosh HD and eject the Install Disk.
Also see > http://support.apple.com/kb/HT2956
Dennis

SMD Setup for MDM

Hello Gurus,
While configuring SMD setup for MDM system, i am getting following error, for MDIS and MDSS
[Wilyhost Agent] Failed to configure EP Agent for sapkrftmox01.krft.net (MDM Host)
My MDM system is not an EP system, strainge how am i getting this error related to EP.
Also in the Local SMD Agent Application log on MDM Host getting the error
[Thread[Thread-14,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAPOsCol not running because status is PERMANENT_ERROR
[Thread[Thread-23,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): launchDaemon: saposcol exited with -1
[Thread[ExecutionRunner_4,5,ExecMgrThreadGroup]] Warning    com.sap.smd.wily.hostagent.destination.ProcessReader - readOutput: Error output: prtdiag can only be run in the global zone
Need the help...please....
Regards
Manoj

Hi,
Can you check your SAP OS Collector is running (SSAPOSCOL)?
What is your Solman version?
Thanks,
Pradeep

I do not have an option to join tracks in Itunes 11.2.2.3. My options button has only two choices after selecting multiple tracks.

I do not have an option to join tracks in Itunes 11.2.2.3. My options button has only two choices after selecting multiple tracks - get track names and submit cd track names. How do I join multiple tracks into one?

Weird, works for me.
tt2

Switch over between two SAP PI systems for downtime minimization

Hello Colleagues,
with our interfaces over our SAP PI 7.31 (ABAP/Java) system we assume we will run in a 7x24 h runtime scenario in the future.
Regarding Business Continuity we have to think about solutions which help us to handle downtimes greater than 15 min. regarding Support Package upgrade, Kernel update, EHP, etc.
The first idea is to implement a second equal SAP PI productive system in parallel to the existing one.
On the sender side a switch over implementation like WebDispatcher, Load Balancer, etc.
For maintenance all Interface traffic can run over PI Nr. 1 and PI Nr. 2 can be updated.
Afterward all interfaces will switched to PI Nr. 2 and PI Nr. 1 can go in maintenance.
Could be this as suitable solution for SAP PI Business Continuity or do you know better solutions?
Many thanks in advance!
Regards,
Jochen

Hello Bernhard, Hello Holger,
many thanks for reply and providing these valuable information's.
The nZDM Concept is already known to me but it doesn’t answer all our questions.
Please let me explain a little more in detail.
Not currently but in the near future we assume some new interface over our SAP PI System will come with the requirement max. downtime lower thank 10 to 15 min. only allowed.
To be prepared regarding this possible scenario, we start thinking about possible different solutions.
First step was the nZDM Concept, of course. But it didn’t meet all our requirements regarding interface downtime.
Some points are:
possible min. downtime is 30 min. and thus is over our requirements for interfaces
only for Update (and planed for Upgrade) the SAP PI application
all operating system and database related maintenance tasks are not covered by nZDM
all Hardware (Server, Storage, etc.) as well not covered by nZDM
Among others, because of these facts we start thinking about a second equal SAP PI system beside to existing productive one.
Than line 1 will take over the whole interface traffic and in the meantime the line 2 can go in maintenance. After finalizing the maintenance for SAP PI Nr. 2 we can switch the interface traffic to SAP PI Nr. 2 to get SAP PI Nr. 1 free for maintenance.
Regarding the topic “PI Federation” I found here in these documentation's several hints regarding this scenario (two SAP PI systems in an switch over scenario).
PI Federation – An Overview
among others Page: 27
Business Continuity: Central PI integration Server with redundant Integration Server to be used in controlled switch over scenarios when upgrading or patching.
or
How to Fast-Switch Integration Scenarios between SAP PI Runtimes Part II: Web Dispatcher
But I didn’t found any further detail documentation's regarding this approach.
The solution should fit as well to our existing hardware infrastructure.
For production we use an IBM (AIX) failover-cluster switch between our both data center.
Regarding our hardware infrastructure prerequisites and downtime requirements, which solution(s) do you recommend? Is PI Federation still an option?
Many thanks in advance!
Regards,
Jochen

Two choices for System Selection in SMD Setup Wizard

Similar Messages

Maybe you are looking for