Two elements in single cell

Hello All,
Is it possible to put an image and a text view into the same column?
Thanks

In NW04 you can use a Caption which can diplay an image and a text.
In NW04s you can define TableCellVariants to get different cell editors in one table column.
Armin

Similar Messages

Dimension Elements in One Cell

Hi All,
Is there anyway for me to put all the elements of a dimension into a single cell?
For example, I have a "Country" dimension, and it contains the following elements:
- Australia
- Canada
- Jakarta
- Philippines
- Hong Kong
- USA
Is there anyway for me to display the above elements in single cell like the following:
"Australia;Canada;Jakarta;Philippines;Hong Kong;USA"
Thanks and best regards,
Ron

Hi Ron,
Try this,
=([Country] where ([Country]="Australia")) || " ;" || ([Country] where ([Country]="Canada")) || ";" || ([Country] where ([Country]="Jakarta")) || ";" || ([Country] where ([Country]="Philippines")) || ";" || ([Country] where ([Country]="Hong Kong")) || ";" || ([Country] where ([Country]="USA"))
Regards,
Sujitha

How to get space between two values in a single cell of a table.

hello,
how to get space between two values in a single cell of a table.
thanks a lot.
kailash.

sorry i got the answer.

How do I add more than two numbers in a single cell

I am wanting to add more than two numbers/values in a single cell.

A1 = B1+C1+D1
OR
A1 = SUM(B1:D1)
this is exactly summing three cells but may be extended to any number of cells up to the limit of the Numbers application

Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436)

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Make the link from the single cell of Bex Report and the image of bill

Hi guys,
my client scan every bill and archive the image by File.net technology.
In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
The possible paths to solve the problem are:
Replicate the image in BW and crate a link from the single cell and the image of document.
Create an URL link from the single cell and the image of document archived on File.net server.
In witch way we can to implement the two paths?
Thank you.
Alessandro

Hi Alessandro,
Have you seen "How ToEnhance your Web Query with the Table Interface"?
You can find it in media library:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
Best regards,
Eugene

How to set a single cell editable in alv Webdynpro Abap

I am trying to edit a single cell on lead selection. here the steps i did to achive this.
1. I added a Attribute READ_ONLY inside my node of type WDY_BOOLEAN.
2. i am conditionally making this Attribute - READ_ONLY = 'X'.
3. i am binding my node with new values.
4. for ALV here is the code i have added.
DATA :lo_cmp_usage TYPE REF TO if_wd_component_usage,
        lr_column    TYPE REF TO cl_salv_wd_column,
        lr_table_settings TYPE REF TO if_salv_wd_table_settings,
        lt_columns TYPE salv_wd_t_column_ref,
        ls_columns TYPE salv_wd_s_column_ref,
        lr_input_field TYPE REF TO cl_salv_wd_uie_input_field,
        lo_interfacecontroller TYPE REF TO iwci_salv_wd_table ,
        lv_value TYPE REF TO cl_salv_wd_config_table.
*Taking reference of the Component Usage
lo_cmp_usage =   wd_this->wd_cpuse_cu_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_cu_alv( ).
lv_value = lo_interfacecontroller->get_model( ).
CALL METHOD lv_value->if_salv_wd_column_settings~get_columns
    RECEIVING
      value = lt_columns.
LOOP AT lt_columns INTO ls_columns.
    lr_column = ls_columns-r_column.
    CASE ls_columns-id.
      WHEN 'USR_ACT_RT'.
        CREATE OBJECT lr_input_field
          EXPORTING
            value_fieldname = ls_columns-id.
        lr_column->set_cell_editor( value = lr_input_field ).
        lr_input_field->set_read_only_fieldname( value = 'READ_ONLY' ).
    ENDCASE.
ENDLOOP.
lr_table_settings ?= lv_value.
lr_table_settings->set_read_only( abap_false ).
lv_value->if_salv_wd_column_settings~delete_column( id = 'READ_ONLY' ).
but instead of changing the particular cell where i have marked READ_ONLY = 'X' it is changing whole column 'USR_ACT_RT' data as editable .
If anybody can please help ASAP

Hi Tashi,
Thanks for your reply,i have did the same way u are doing here for setting the READ_ONLY Attribute conditionally.
here is my code for setting the read only attribute .
IF NOT lo_nd_nd_cost_rate IS INITIAL.
    lo_nd_nd_cost_rate->get_static_attributes_table( IMPORTING table = lt_nd_cost_rate ).
ENDIF.
IF NOT lo_el_nd_cost_rate IS INITIAL.
* get all declared attributes
    lo_el_nd_cost_rate->get_static_attributes(
      IMPORTING
        static_attributes = ls_nd_cost_rate_sel ).
ENDIF.
lv_datum = sy-datum.
lv_month = lv_datum+4(2).
** @TODO handle non existant child
LOOP AT lt_nd_cost_rate INTO ls_nd_cost_rate WHERE quarter = ls_nd_cost_rate_sel-quarter.
    IF ls_nd_cost_rate-quarter = 'Q1'.
      IF ( lv_month EQ '01' OR lv_month EQ '02' OR lv_month EQ '03' ).
        ls_nd_cost_rate-read_only = 'X'.
      ELSE.
        ls_nd_cost_rate-read_only = ''.
*   report message
        CALL METHOD lo_message_manager->report_warning
          EXPORTING
            message_text = lv_text.
      ENDIF.
    ELSEIF ls_nd_cost_rate-quarter = 'Q2'.
      IF ( lv_month EQ '04' OR lv_month EQ '05' OR lv_month EQ '06' ).
        ls_nd_cost_rate-read_only = 'X'.
      ELSE.
        ls_nd_cost_rate-read_only = ''.
*   report message
        CALL METHOD lo_message_manager->report_warning
          EXPORTING
            message_text = lv_text.
      ENDIF.
    ELSEIF ls_nd_cost_rate-quarter = 'Q3'.
      IF ( lv_month EQ '07' OR lv_month EQ '08' OR lv_month EQ '09' ).
        ls_nd_cost_rate-read_only = 'X'.
      ELSE.
        ls_nd_cost_rate-read_only = ''.
*   report message
        CALL METHOD lo_message_manager->report_warning
          EXPORTING
            message_text = lv_text.
      ENDIF.
    ELSEIF ls_nd_cost_rate-quarter = 'Q4'.
      IF ( lv_month EQ '10' OR lv_month EQ '11' OR lv_month EQ '12' ).
        ls_nd_cost_rate-read_only = 'X'.
      ELSE.
        ls_nd_cost_rate-read_only = ''.
*   report message
        CALL METHOD lo_message_manager->report_warning
          EXPORTING
            message_text = lv_text.
      ENDIF.
    ENDIF.
    MODIFY lt_nd_cost_rate FROM ls_nd_cost_rate INDEX sy-tabix TRANSPORTING read_only .
    CLEAR ls_nd_cost_rate.
ENDLOOP.
lo_nd_nd_cost_rate->bind_table( lt_nd_cost_rate ).
please see in the below sceen shot the last two cells are editable in the User Actual Rate Column whlie the selected rows cell is not editable. Please revert if u have any input for same.

Insert or delete single cells

How do I insert or delete a single cell?
For example, I want two columns of text. aligned horizontally, and, separated by a blank column.
The two text lists have been created in other applications.
So I copy list1, and paste it in cell C7.
Then I copy list2, and paste it cell G6.
oops. Now the lists are not aligned horizontally.
The easiest way to align the lists is by either delete a single cell in column C or insert a single cell in column G.
But I can't find the option to add/delete single cells.
Does that option exist in Numbers? If so, how/where?
Thanks,
AJ

AJ,
My first thought on reading your post was: why are you using a single table for two side-by-side lists? If you had used two single-column tables you could use Delete Row or Insert Row to do what you want.
pw and John both gave you perfectly good solutions, and I just wanted to add my two cents worth. I don't see much value in the Add/Delete Cell feature that you are looking for. The action never ends there because there's always a followup question as to what you want to do with the data to the right of and below the affected cell. So, it hasn't saved you any real time.
Numbers has a very handy and secure method for moving a range of data. Highlight the range that you want to move. Then, Edit > Mark for Move. Now, click in the new starting location and Edit > Move.
There you go; several ways to recover from the inevitable oops. Depending on how soon you discover your mistake, Command-Z is probably the easiest fix.
Jerry

Inserting a single cell

Okay, I can insert a whole row or column, but how do I insert a single cell? Say I need to add a cell at G8, moving the data down one cell. Rather than trying to select 325 cells and move them down.
Simple in Excel, but I'm giving Numbers a reason to not use Excel.
Anyone?

I still submit that you haven't "grokked" the Numbers yet. I have used it extensively and have never needed this feature.
Well, I guess it's true I have not "grokked" Numbers yet. And yes, the data was entered inconsistantly, Jax, and that's the problem I'm trying to fix. All of which would be easier if I had a simple Add Single Cell command. Goodness, it's not like I'm asking for the Red Sea to part, just a single column.
I'm dealing with 2 tables, each with 12 categories, 60 entries per category, and I'm trying to compare the two. I sorted each by category and then by entry. Then I copied and pasted the appropriate columns from Table 2 over to Table 1. After moving columns around (which is easier than in Excel, admittedly), I'm going down the columns and looking for discrepancies. Finding one, I need to bump a column down a cell so I can add the missing entry so both columns are exactly the same. There are cells missing in both columns, so I can't assume one is more correct than the other.
So I guess the Martian thing to do (being a stranger in a strange land, i.e., a non-Microsoft spreadsheet), would be create 12 different tables based on twelve different categories. Of course, then I'll need to combine them back together because sometimes I sort by entry, not just category. Effective multiplying my efforts by 12.
Oh, and I was well aware of the demo, thank you very much. I'm a few months passed the 30 day limit before this project came about. I bought the software in an attempt to cut away from Microsoft Office. Surely y'all can understand that. Going cold turkey wasn't such a good idea, I guess.

Screen painter space between two element in one line

Hi Experts,
i am developing a RF program with screens of size 16linesX20columns. limited space should be used . But when i create more than one element in one line , one space is always present between two elements,and the space can not be deleted or overlaped. because of this, elements can not get enought columns.
i am sure that elements can be adjacent without space in the past time. i am not sure space appear after what changes was done by me...
can you please give some suggestion if you also have the same issue.
Yimeng

Hi,
Can you elaborate which screen elements are you using.
You can place screen elements one after another in a single line without any spaces.
Danish.
Edited by: Danish2285 on Sep 21, 2011 12:38 PM

Having difficulty resizing a single cell width in a table

Hi
I have a table in a Pages 09 document with several different rows and columns. I'm having real trouble trying to resize a single cell - that is I have a row split into two columns and the left column won't shrink very far so I have loads of empty space after the text I have in that column which is a pain as it looks untidy. I've selected that cell and have no option to adjust column width in Table Inspector, I've selected 'Automatically adjust width to text size' and that's making no difference and trying to manually move the cell wall to the left makes no difference - it'll go so far and then no more.
What's just as annoying is that I have exactly the same 'one row/two columns' format just below this row and that left column cell shrinks even less, meaning I have a staggered columns set up going on down my table which looks daft.

I am unable to reproduce this behaviour.
You may activate the "Show Invisible Characters" feature which will perhaps reveal the existence of extraneous chars.
If it's not that, I would be interested to receive this table.
Of course, remove personal infos from the document before sending it to my mailbox.
Click my blue name to get my address.
Yvan KOENIG (VALLAURIS, France) mercredi 31 mars 2010 22:07:25

I have to print two labels using single XML file.Error:Only one top level e

Hi,
I have to print two labels using single XML file. But its giving error:
[Error] Error -1072896683 - Line: 38 Pos: 2 Error: Only one top level element is allowed in an XML document.
Below is my XMl file:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE labels SYSTEM "label.dtd">
<labels FORMAT="lib://FRD/PurchasedDoor.btw" PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
<label>
<variable name= "Color">AUTUMN</variable>
<variable name= "Special_Message_Attribute">MSG*</variable>
<variable name= "Special_Message">This is special Message Label</variable>
<variable name= "Model"></variable>
<variable name= "Build_Date">09-APR-12</variable>
<variable name= "Assy_Cart"></variable>
<variable name= "Assy_Slot"></variable>
<variable name= "Finish_Cart"></variable>
<variable name= "Finish_Slot"></variable>
<variable name= "Serial_Number">1945.1.1.2-1</variable>
<variable name= "Serial_Number_Barcode">1945.1.1.2-1</variable>
<variable name= "Specie">BIRCH</variable>
<variable name= "Truck_Group"></variable>
<variable name= "Label_Sequence_No">1</variable>
<variable name= "WIP_Cart"></variable>
<variable name= "WIP_Slot"></variable>
<variable name= "Cabinet_Sequence_No">110</variable>
<variable name= "JC"></variable>
<variable name= "Thickness"> </variable>
<variable name= "Width"> </variable>
<variable name= "Length"> </variable>
<variable name= "Overlay"></variable>
<variable name= "Options">B30</variable>
<variable name= "Profile_No"></variable>
<variable name= "Door_Style">NEWBERRY</variable>
<variable name= "Glaze"></variable>
<variable name= "Shape"></variable>
<variable name= "Glass"></variable>
<variable name= "Hinge_Side"></variable>
<variable name= "Hinge_Type"></variable>
<variable name= "EGE"></variable>
</label>
<labels FORMAT="lib://FRD/SpecialMessage.btw" PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
<label>
<variable name= "Serial_Number">1945.1.1.2-1</variable>
<variable name= "Special_Message">This is special Message Label</variable>
<variable name= "Cabinet_Sequence_No">110</variable>
</label>
</labels>
Please suggest.

>
XML can only have one root element per file.
>
from XML Document: The Root Element

Concatenation of Data from 4 infoobjects into a single cell in Bex Report

Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
****Points will be awarded***

Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
****Points will be awarded****
Regards,
Hitesh Shetty.

Multiple values in a single cell in report !!

Hello,
I want to display multiple values in a single cell, each value separated by comma.
Ex: I have Employee and Department.
If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
Please help !

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

Two elements in single cell

Similar Messages

Maybe you are looking for