Two idocs with same idoc number in idx5

We are using an idoc to file scenario where idocs are bundled using bpm and posted to ftp. here the issue is we are getting two idocs with same idoc number in idx5. due to which the file in ftp is getting overwritten.
Could anyone suggest me what to do in this regard.

Hi,
>>>check your sender system is sending same IDoc twice ?
if you send the same IDOC twice they both get different numbers as IDOC number is taken from the IDOC num range
unless you're able to send the same IDOC twice with the same IDOC num somehow
Regards,
Michal Krawczyk

Similar Messages

Two Interface with same IDOC sperated by Document Type

Hi All,
I have Two interface which is for RFQ and Purchase order, bother uses same IDOC orders05, i need to indentify which one for which interface using Document type for purchase NB and and AN for RFQ , please help me to slove this isssue , hope we muct use Context object for this , but i dont know how to use it , please help me
thanking you
Sridhar

Hi,
Can you explain a bit about your scenario, coz I think it can be handle in other way without using context objects..
But if you want to use the context object, then you can add it in Message Interace ---> Context Objects, and in ID while doing RD you can find it under Condition Editor ---> take F4 help and then select context objects.
Regards,
Sarvesh

Two instance with same port number in one machine.

How can I config one machine(one IP) to listen to two different URLs with same port? (http://www.abc.com & http://www.xyz.com)??

What you are looking for is a feature called virtual servers. Lots of information in Chapter 13 of the admin guide.
The key is that there is only one server instance. (One available port pretty much implies one server instance.) But the virtual server feature allows you to specifiy different "virtual" servers based on the URL characteristics. (such as domain name)

REPROCESSING AN IDOC WITH SAME NUMBER

hi ppl,
i hv sent an idoc to the inbound system with a generated idoc number.
and now i had added some fields fo the same idoc and have to resend it to the same inbound system
with the same IDOC NUMBER.
how can we RESEND AN IDOC with SAME IDOC NUMBER.
thanx very much...
regards,
RAVI.

>
ChakravarthiPonnam wrote:
> with the same IDOC NUMBER.
> how can we RESEND AN IDOC with SAME IDOC NUMBER.
Was that IDOC ended with status 53? If so then I donu2019t think if you could able to edit the segments and reprocess straight forward.
If that IDOC has been ended with Error then just edit this IDOC(WE02>Double click on segment then from menu "Data record>change") now the status has been change to 69. then just reprocess with BD87.
NOW, if your IDOC has ended with 53 and you want to edit this then a minute work-around we have to do. Like first change the IDOC status from 53 to 69 then do the same like for error one,
Cheers
Amit.

How to transfer one file to multi sap with same IDOC Type?

Hi all!
I need your help..
My senario is tansfer one xml-file to multi-sap server
with same IDOC type.
IS it possible to transfer without BPM?
I think that the way not using bpm is impossble,
because the file is deleted by sender adapter.
If I'm using BPM, how to design?
I consider 'fork' or 'switch',
but, I guess,
Idoc is will be initialized by other branch at last step.
I hope good information.
Regards.

Hi,
you can create using BPM .
IR
you need to create source for one interface and trager for two differnent interfaces.
suppose if you are doing message mapping in message tab source is one interface targer is multiple interface..so that source can map multiple interfaces...
create the Interface mapping one source two are target interfaces.
Create the Integration proces...
First step is receive step next use the Transformation Step that means source message it will conver two targets...then use the Fork step Recever Determination step goes to the first Send step..
again drag the another receiver determination and use tge send step..close the FORK step.
regards,
venu.

Vendor Invoice with Same Reference Number in two fiscal years.

Vendor Invoice entered in SAP.
DocumentNum 1600000612 Reference "47026723WA" Vendor Number "637278" Year "2008"
DocumentNum 1600000667 Reference "47026723WA" Vendor Number "637278" Year "2009"
We are thinking SAP will not allow/generate invoice with same Reference number. How can we restrict from entering Vendor invoices with Same Reference Number from same Vendor.
Thanks
Raghuram

Restrict it through message control
Transaction code OBA5
Message NO.121
Make it error for batch and online.
Thanks,
Ravi

CS4 & CS5 Indy with same serial number

Can CS4 & CS5 Indy with same serial number both be open on the same machine?
Thanks!

I'm wondering how you have two versions with the same serial number? Volume license maybe?
In the world of single licenses an upgrade from CS4 to CS5 would get a new new number, at least in my experience. As far as installing multiple versions (but not differnt localizations, like US and ME, of the same version) no problem, and I often have multiple versions open at the same time for testing and answereing questions here on the forum.

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

Two Switches with same MAC+Priority running STP

Hi
what will happen if two switch with same MAC-ADDRESS and same STP priority will run STP , how will elect to the root bridge ???? how the STP process will handle this situation?
thanx

Well, first off, no two switches (or switchports) will have the same MAC (if they do, you're buying switches from the wrong, very bad place).
Every port of the switch will have (at least) one MAC of it's own.
Given the same priority for all switches/bridges on the LAN, the lowest switch/bridge MAC on the LAN will win as the root.
VLANS take on the MAC of the administrative interface ("CPU"): i.e., xxxx.xxxx.5000, the first port (i.e., fa0/1) is xxxx.xxxx.5001, the second (fa0/2) is xxx.xxxx.5002, and so on
If you do a "show interface", the MAC / bia is displayed in the second line.
Good Luck
Scott

Unbale to create new document part with same document number

Number range assigned to the X Document Type is internal. I have created new document (0001) with Document Part 000 & Version 00. For same Document Number when i tried to create New Document part by mentioning Document Numner 0001, Document Part 001 and Version 00, it says Document Type X can be assigned to internal number range only.
Even I tried with following selection....
Document Number = Blank
Document Part = 001
Document Version = 00
Template:
Document = 0001
Document Part = 000
Document Version = 00
Now system is creating document with new number i.e. 0002. But we want to create another document part with same Document Number. What is the problem with internal number range for Document Number?

Hi Pradeep,
Following are the config parameter of the document type.
CM Relevnce = blank
Number assignmt= 01
Internal Number Range =02
External Number Range= blank
Number Exit =MCDOKZNR
Vers. No. Incr. =0
Version Sequence = blank
AlternativeScreen = blank
Let me know if you need anything more.
Edited by: JJSingh76 on Dec 7, 2010 7:25 PM

Reprinting check with same check number

How to reprint the check with same check number. In transaction FCH7, I am able to reprint the check but it gives another check number. Is there another transaction code to reprint the same check with the same check number
thankyou

Hello Sheena,
please disregard the last answer, that works for SAP Business One...
For your situation:
If you reprint checks with transaction FCH7, you need to void the
previous check (with a void reason) and afterwards the system would
assign a new check number.
However, if you do it through transaction FBZ5 (print form for Payment
Document), the system will ask you, if you would like to print an
existing check number or would like to get a new check number assigned
(Check -> print->"Check information already exists.
Reprint old check number or assign new check number?" => print with old
check number).
As per you comments, I assume that the second option (via transaction
FBZ5), is the way you should use to reprint checks without getting
a new check number assigned.
Sorry for the confusion...
Cheers,
Jon

Two account with same UPN in Active Directory

Is it possible to have two accounts with same UPN in AD?
I'm using Windows Server 2012 R2

To expand on what Mr X said. Active Directory allows you to assign just about anything to the userPrincipalName attribute, as long as the value is unique. The value of this attribute is generally referred to as the UPN. But you could assign values with no
"@" symbol, for example, or more than one "@" symbol. Also, Active Directory does not require that any value be assigned. It is an optional attribute.
If no value is assigned to the userPrincipalName attribute, then the user can use a "default" UPN, which is <sAMAccountName>@<DNS domain name>, where <sAMAccountName> is the "pre-Windows 2000 logon" name of the user
(the value of the sAMAccountName attribute), and <DNS domain name> is the DNS name of the domain.
If a user has a value assigned to userPrincipalName that does not match this "default" form, then they can logon with either UPN, as long as no one else has either value assigned to their userPrincipalName attribute. You will note that Active
Directory enforces uniqueness in the domain on sAMAccountName values.
If in domain "domain.com" a user has a sAMAccountName of "jsmith" but userPrincipalName "[email protected]", then another user can have userPrincipalName of "[email protected]" (as long as no one else
has that value assigned to userPrincipalName). They can each logon with their assigned values for userPrincipalName. But the first user can no longer also logon with their "default" value, based on their sAMAccountName, because it is now
used by someone else. But if you attempt to assign a value to userPrincipalName that is also assigned to another user, you get an error.
Bottom line, only one person can logon with any given UPN.
Richard Mueller - MVP Directory Services

I got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

i got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

I was going to ask a similar question - we bought the boxed version of PSE11 with mac and pc disc - can we install the program on our mac as well as our PC? It's already on the PC but would be very handy to have it on Mac also. Thanks

Two records with same key (Infocube)

Hi,
I was trying to do, in a update rule, an "IF" condition with two key figures.
IF Kf1 > Kf2. result = Kf1 else result = Kf2.
But the data in the source (datamart Infocube to infocube) have tow records with the same characteristics combination (the same keys)and different amount in the keyfigures, then the result of my "if" condition is not the expected because I understood in the infocube only exists one characteristics combination. :S
I was seeing those records in the manage transaction of the infocube.
Some reason for this?
Thanks and regards
Victoria Leó

This can happen with parallel loads. Two rows with same set of Char values but in different packets of the same Request, being loaded at the same time.
It really shouldn't be an issue - your update rule will make the KF change as desired. Your queries aggregate KFs based characteristic values, not Dim IDs, so you'll get the totals you expect.
Here's some more info:
There is an RSRV Test that lets you check a dimension for a cube to see if multiple DIM IDs exist for the same combination of Chars - <b>Multiple Entries in Dimensions of a (Basis) InfoCube</b>
Output looks like:
12:02:24 o'clock on 08/25/2006: Start test run for user PIZZAMAN:)
Dimension ZFM_C521: DIMID 61,215 and 61,214 have same characteristic values
Dimension ZFM_C521: DIMID 61,880 and 61,879 have same characteristic values
Dimension ZFM_C521: DIMID 61,366 and 61,365 have same characteristic values
Dimension ZFM_C521: DIMID 61,368 and 61,367 have same characteristic values
12:02:24 on 08/25/2006: Test run for user PIZZAMAN:) completed
You can run the Correct Error option to have it update fact rows to use one of the DimIDs if you want, but unless you have lots of them, I even wouldn't bother.
Here's the description of the test:
<u>Description</u>
This elementary test recognizes whether there are several lines that have different DIMIDs(dimension table key), but have the same SIDs for the selected dimension table for the InfoCube specified. (This can occur by using parallel loading jobs). This has nothing to do with an inconsistency. However, unnecessary storage space is occupied in the database.
<u>Repairs</u>
Since the different DIMIDs with the same SIDs are normally used in the fact tables, they cannot simply be deleted. Therefore, all of the different DIMIDS in the fact tables are replaced by one DIMID that is randomly selected from the equivalent ones. Before a change can be made to the database, the consent of the user is requested.
DIMIDs that have become unnecessary are deleted in the connection. In doing so, not only are the DIMDs deleted that were released in the first part of the repair, but so are all of those that are no longer used in the fact tables (including aggregates). The consent of the user is again requested before this change is made.

Struts- two actions with same path in struts config

hai
I am having html:select tag with two options (View And Download) in a form.My form signature is like <html:form action="select">.I mapped two options(View,Download) with same action path.When i click view it doesn't forwards(remains idle) and no error is shown.But i click download it forwards to the appropriate page.If iam having two tags with same action path the second is only working.This problem doesn't comes when iam having one tag alone.
My code is here:
-----------Select.jsp----------------
<html:form action="Select">
<html:select property="id">
<html:option value="view">View</html:option>
<html:option value="download">Download</html:option>
</html:select>
</html:form>
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewForm" type="ViewForm"/>
<form-bean name="download" type="DownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewForm"
type="ViewAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
</action>
<action path="/Select"
name="downloadForm"
type="DownloadAction"
input="/Select.jsp">
<forward name="success" path="/Welcome.jsp"/>
</action>
</action-mappings>
Can i have action tag with same paths like this.If not please provide me a solution

I have created two success pages.
I have created two findForward in my ActionClasspublic ActionForward execute(ActionMapping mapping,...............)
if(a==view)
return mapping.findForward("success");
else
return mapping.findForward("success1");
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewdownloadForm" type="ViewdownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewdownloadForm"
type="ViewdownloadAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
<forward name="success1" path="/Success1.jsp"/>
</action>

Two idocs with same idoc number in idx5

Similar Messages

Maybe you are looking for