TWO IIS virtual directories for TWO WebLogic Instances

I have an IIS website with one IIS virtual directory which is using iisproxy.dll
to redirect the request to a weblogic instance.
Now, I would like to create another virtual directory which has to redirect to
another weblogic instance (with different port). How can I do that? I have tried
to create another copy of iisproxy.dll & iisproxy.ini but that new website still
forward the request to the old website. Please advice.
Many thanks.
Ronald

Hi Ronald
This is not possible with existing weblogic releases.
However There are couple of workarounds for this.
1. Setup two IIS Sites forwarding requests to two weblogic servers.
Make sure The IIS sites are running with Application Protection of
High(Isolated).
Make sure the iisproxy.ini and iisproxy.dll for theses different sites
are in different
diectories and configure the sites and iisproxy.ini files appropriately.
- This, i tries and works great.
2. Let All the requests go to one weblogic server. Register a servlet
with you'r second virtual directory name as a proxy servlet proxying to
the second
weblogic server.
- This might work. But you have to remeber the performance impact of
proxying twice.
Hope this helps
vijay
"Ronald" <[email protected]> wrote in message
news:3aff5049$[email protected]..
>
I have an IIS website with one IIS virtual directory which is usingiisproxy.dll
to redirect the request to a weblogic instance.
Now, I would like to create another virtual directory which has toredirect to
another weblogic instance (with different port). How can I do that? I havetried
to create another copy of iisproxy.dll & iisproxy.ini but that new websitestill
forward the request to the old website. Please advice.
Many thanks.
Ronald

Similar Messages

Sccm 2012 DP failed to create iis virtual directories

I am trying to install a branch server as Sccm 2012 DP.
I already installed around 15 branch servers without any problems.
The problem I have is that the branch server failed to create iis virtual directories.
In my console under Monitoring, component status It writes that Distribution Manager successfully installed iis component of operating system to distribution point ""
Next it writes error to send packages to that branch server.
The site server distmgr.log shows the error below:
Failed to start primary service wdsserver
Microsoft Sql Server Native Client 11.0 login failed for user "xxx"
Failed to connect to the sql server connection type : SMS ACCESS
for Display = \\myserver\mswnet: sms_site= XXX failed to get master SCF.
Currently site xxx is initializing site control data. Cant get Master SCF from database at this time. will try later.
DPConnection;;;; ConnectWMI() failed to connect to branch server.
I try to remove the dp role, leave it for 12 hours reboot the server and assign the role again but same problem.
Any idea ?
Nikkoscy

Hi,
Have you installed all features required?
Technet prerequisite list for site system roles:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Communication between Two WebLogic instances on the same machine

Hi,
We're having a problem with communication between two copies of Weblogic on
the same machine. They are configured with seperate ports (regular and SSL).
Independantly, they run fine. I can access EJBs running on either of them.
The problem is that a bean in one of them has code which attempts to access
an EJB on the other one. The procude fails when trying to obtain the initial
context. This same code works if compilied independantly of WebLogic on the
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected]

Thanks for the prompt reply.
There is one IP address (internal address 10.227.1.34) one the machine. WLS1
is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
When WLS1 attempts to obtain a context to WLS2 with the URL
t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
on the both WLS processes shows communication occuring between the two
followed by long periods of silence. Finally WLS2 spits out the error
ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
the entire error if it would help).
After another long pause, WLS1 quits trying with the error 'Server
10.227.1.34:7004 not found' (again paraphrased).
Among the things we've tried:
* Changing the URL from the IP to 127.0.0.1
* Enabling/disabling SSL on either or both WLSs.
* Changing the server name in WLS2's copy of weblogic.properties from
'myserver' to 'myserver2' (previously they were both 'myserver')
* Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
not found errors and quit because that WLS is being used by other people)
This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
Any suggestions would be appreciated.
Best,
Randy Yarger
marchFIRST
[email protected]
"Michael Girdley" <[email protected]> wrote in message
news:[email protected]...
>
>
There should not be. What is your network configuration? Are they on
separate IP addresses?
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Randy Jay Yarger" <[email protected]> wrote in message
news:[email protected]...
Hi,
We're having a problem with communication between two copies of Weblogicon
the same machine. They are configured with seperate ports (regular andSSL).
Independantly, they run fine. I can access EJBs running on either of
them.
The problem is that a bean in one of them has code which attempts toaccess
an EJB on the other one. The procude fails when trying to obtain theinitial
context. This same code works if compilied independantly of WebLogic onthe
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected]

Windows IIS virtual directories

I'm setting up CPS and Contribute 3 on a large site. Users in
different departments have access to specific folders that contain
their pages. What I can't seem to be able to do is to add virtual
directories to the users' list of folders to edit (though I really
just want them to be able to link to files in those virtual
directories). The virtual directories contain document libraries
(agendas, minutes, reports, media releases) that are maintained by
another system, so it seemed like a good idea to keep those folders
out of the root folder of the site that the CPS manages. But those
virtual directories don't show up in the list of folders to allow
users to edit. Has anyone run into this problem and found a way
around it? I could just drop the virtual directory idea if that's
the only way.
Tom Benjamin
Web Development Analyst
Capital Regional District, Victoria, BC, Canada

Hi,
If NDES is the only CA role service on this server, this problem is expected. Because NDES requires the installation of the Certification Authority Web Enrollment role service on the same Server.
The Certificate Authority Web Enrollment pages are needed since the NDES IIS application is a virtual directory underneath the Web Enrollment pages (CertSrv).
Hope this helps.
Regards,
Bruce
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Who is VERY strange is that (in the "Thomas Larsen" configuration so without installing the "Web
Enrollment pages") ... we can access to the admin page with the url http://serveurNdes/certsrv/mscep_admin" !!! How is it possible !!

Multiple listen ports for one weblogic instance

Can anybody confirm that you can have only one listen port defined for a single
weblogic instance (i.e. one instance cannot be listening to multiple ports at
the same time)?
Thanks

you can have multiple ip's assigned to the same box
and bind each WLS instance to a unique which will listen
on the same port.
Kumar
Gary Wong wrote:
Can anybody confirm that you can have only one listen port defined for a single
weblogic instance (i.e. one instance cannot be listening to multiple ports at
the same time)?
Thanks

Exchange Server IIS Virtual Directories

Hi Guys,
I need to remove all the directories from Exchange CAS Server except the directories are required for ActiveSync. can someone give me the direction about the directories are not required for ActiveSync.
Thanks in Advance.
Regards
Rishi Aggarwal
Regards Rishi Aggarwal

my client made a decision about removing external OWA but ActiveSync. so looking what are the Exact directories are required for ActiveSync so except that i can remove every directory.
Hi,
OWA works only internally,
ActiveSync works both internally and externally, right?
I would suggest to create a new website with a unique IP in IIS and only adding ActiveSync to that website using a cmdlet. That would give us a website hosted on the box that served the ActiveSync devices but nothing else, leaving the OWA open for internal
access. The firewall would point to this website/IP on the CAS. We could also create a virtual directory under there for /OWA and /Exchange which would serve up the generic “this service is no longer available, please contact the help desk” message as the
default webpage. This makes it easy to manage, monitor, and control traffic to.
Command to create a new Active Virtual directory:
New-ActiveSyncVirtualDirectory -WebSiteName "domain.com"
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Cisco ACE and IIS Virtual Directories

Hello All,
I have the Load Balancing between to servers working correctly except for on thing. If I enter www.domainname.com\apps into the browser it will returns a 302 page, but if I enter www.domainname.com\apps\ the page will Pull up. Is there a way for the ACE to add the \ after the Virtual Directory?

Here is an example of the configuration:
rserver host NET01
ip address 10.0.20.24
inservice
rserver host NET02
ip address 10.0.20.25
inservice
serverfarm host NET-Farm
predictor leastconns
rserver NET01 80
rserver NET02 80
    inservice
parameter-map type http HTTP_PARAMETER_MAP
persistence-rebalance
sticky ip-netmask 255.255.255.255 address source NET-IP
replicate sticky
serverfarm NET-Farm backup Maintenance
class-map match-all NET
2 match virtual-address 10.0.20.21 tcp eq https
policy-map type loadbalance first-match NET
class class-default
    sticky-serverfarm NET-IP
    insert-http x-forward header-value "%is"
policy-map multi-match int71
class NET
    loadbalance vip inservice
    loadbalance policy NET
    loadbalance vip icmp-reply active
    nat dynamic 6 vlan 71
    appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 71
no icmp-guard
nat-pool 6 10.0.20.21 10.0.20.21 netmask 255.255.255.255 pat

CFGRID not working with IIS Virtual Directories

I was wondering if anyone else is having this issue?
Cfgrid works fine outside of the virtual directory. But when
I put the file in a virtual directory the applet doesn't load.
Please help
Thank you
Jeff S

Got it working with "nodePath"
Thanks,
Ranjith Pillai

How to share session beween 2 weblogic instance (451)

Hi,
          I'm looking for the possibility to share session information between two
          weblogic instance (for weblogic 4.5.1).
          The first instance create and add information inside the session and store
          the session inside jndi for example.
          The second instance lookup the jndi to find all session informations and
          continue to work with this informations.
          If somebody have already do it, I'm intersted about tips and informations to
          do this fonctionnality.
          Thanks


If the two server instances are in the same cluster, they automatically
          share session info!
          Gene Chuang
          Join Kiko.com!
          "Didier" <[email protected]> wrote in message
          news:[email protected]..
          > Hi,
          >
          > I'm looking for the possibility to share session information between two
          > weblogic instance (for weblogic 4.5.1).
          >
          > The first instance create and add information inside the session and store
          > the session inside jndi for example.
          > The second instance lookup the jndi to find all session informations and
          > continue to work with this informations.
          >
          > If somebody have already do it, I'm intersted about tips and informations
          to
          > do this fonctionnality.
          >
          > Thanks
          >
          >

Need to establish Connection between CRM and   Virtual Directories.

Dear All,
I am working for Telecom project.
I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
This is existing in Access management system.( SAP EP environment )
The basic requirement is, with SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
Which is existing in Access management system .
   Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
Please let us know..Certainly there will be a reward points
Thanks & regards.
BNP

Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

Case confusion - two dbcontrol config directories for one database

Oracle 11.2.0.2 SE-One 64-bit
Oracle ASM 11.2.0.2 64-bit
Oracle Linux 5.6 x86-64
Stand alone server, no cluster, no RAC
Configured a new dbcontrol for subject database. Everything seems to be functioning correctly but it created two config directories
oracle:mydb$ cd $ORACLE_HOME
2013-09-12 14:21:50
oracle:mydb$ ls -l myserver*
myserver.mycompany.org_mydb:                        -------- note the dbname is lower case and directory is sparse
total 4
drwxr----- 3 oracle oinstall 4096 Sep 12 14:13 sysman
myserver.mycompany.org_MYDB:                        -------- note the dbname is upper case and directory is fully populated
total 12
-rw-r----- 1 oracle oinstall    6 Sep 12 14:13 emctl.pid
-rw-r--r-- 1 oracle oinstall   56 Sep 12 14:13 oraInst.loc
drwxr----- 7 oracle oinstall 4096 Sep 12 14:13 sysman
And in the j2ee directory we get this. Note the dbname is in upper case
oracle:mydb$ cd oc4j/j2ee
2013-09-12 14:26:49
oracle:mydb$ ll
total 36
-rw-r--r-- 1 oracle oinstall 1012 Apr 5 08:56 deploy_db_wf.ini
drwxr-xr-x 14 oracle oinstall 4096 Apr 5 08:53 home
drwxr-xr-x 3 oracle oinstall 4096 Apr 5 08:51 oc4j_applications
drwxr-x--- 6 oracle oinstall 4096 Apr 5 08:51 OC4J_DBConsole
drwxr-xr-x 10 oracle oinstall 4096 Sep 12 14:13 OC4J_DBConsole_myserver.mycompany.org_MYDB
drwxr-xr-x 5 oracle oinstall 4096 Apr 5 08:51 OC4J_Workflow_Component_Container
drwxr-xr-x 5 oracle oinstall 4096 Apr 5 08:51 OC4J_Workflow_Management_Container
drwxr-xr-x 2 oracle oinstall 4096 Apr 5 08:53 utilities
What the database tells us about itself:
SQL> select name from v$database;
NAME
MYDB
SQL> select instance_name from v$instance;
INSTANCE_NAME
mydb
SQL> select name,
2         value
3 from v$parameter
4 where name in ('db_name',
5                 'db_unique_name',
6                 'instance_name',
7                 'service_names',
8                 'global_names'
9                 )
10 order by name;
NAME                 VALUE
db_name              MYDB
db_unique_name       MYDB
global_names         FALSE
instance_name        mydb
service_names        MYDB
And the environment from which I ran emca:
oracle:mydb$ env |grep ORA|sort
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/dbhome_1
ORACLE_SID=mydb
The mis-matched cases stem from my predecessor deciding he didn't like database names in lower case, so started changing in mid-stream. I'm not sure exactly what he did or how he did it. But that aside, the results of creating a new dbcontrol (getting two directories for the same database) still puzzling. I started by dropping the original (emca -deconfig dbcontrol db -repos drop), which dropped the upper-case version of the directories, but left the lower-case version. I then deleted that manually before running emca to configure a new dbcontrol, but still ended up with both versions.
Ideas?

The ORACLE_HOME may have been set twice with differents values in it (i.e. extra slash) before starting twice the same db.
Please, have a look to this article from Ivan Kartik :
http://ivan.kartik.sk/index.php?show_article=40
And depending of your OS, you could check what ORACLE_HOME is used for each process :
How to Check the Environment Variables for an Oracle Process*
Doc ID: 373303.1*
Nicolas.
added the metalink note ref.
Edited by: N. Gasparotto on Sep 4, 2009 11:34 AM

Combined-tier WebLogic Cluster (two clustered instances)

Hi guys,
How can I realise it?
[http://lowerthan60.files.wordpress.com/2010/10/cluster_1.jpg]
Is it right steps?
[http://middlewaremagic.com/weblogic/?p=971]
Load Balancer and main domain working fine between two IP (instances).
Edited by: 867750 on Jun 23, 2011 5:44 AM

          In the case of WL6 and WL7 clustering, if the requests from the same user jump
          around different instances, we experience this kind of session loss problem very
          frequently. I am not sure if this is the same case for WL5. The idea is, find
          a way to make sure the requests from the same use always hit the same instance
          unless it is dwon.
          "Cameron Purdy" <[email protected]> wrote:
          >Are you using cookies or URL encoding?
          >
          >Peace,
          >
          >Cameron Purdy
          >Tangosol, Inc.
          >http://www.tangosol.com/coherence.jsp
          >Tangosol Coherence: Clustered Replicated Cache for Weblogic
          >
          >
          >"Sam Dupont" <[email protected]> wrote in message
          >news:[email protected]..
          >> Any advise on the following problem would be greatly appreciated.
          >>
          >> I am running WebLogic 5.1 (don't know ServicePack offhand) on two
          >instances which are clustered.
          >>
          >> When both instances are up and I redirect from a jsp to a jsp, I lose
          >the
          >httpSession. When either of the instances are down, the httpSession
          >is not
          >lost.
          >>
          >> Has anyone ever seen anything like this or what might be causing it?
          >>
          >> Thanks
          >
          >

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Can we have two different web url for a same instance ??

Can we have two different web url for a same instance ??
I have read it somewhere that it's possible in R12....please correct me if I am wrong...and if it's correct please let me know the doc id for it...

Hi again;
Pelase also see Hussein Sawwan previous great post
Multiple URL (hostname.domain) to the same instance
Multiple URL (hostname.domain) to the same instance
Regard
Helios

Two running instances of Weblogic on the same machine

I need to run at least two instances of Weblogic on the same machine. My Company GE Capital purchases the Clustered version and the BEA Engineer who did the install did not know Unix and could not intall the instances. Could you please give pointers to on how to do this? You can also write me to [email protected]
Thanks,
John G

....plus, you have to consider the license issue.
Vidar wrote:
>
It does not sound to bad, but would it not be hard to cooperate with other
people, since you will often use API's and EJB's developed and deployed by
other team-members?
Does anybody have any documents or ideas on what the best way to cooperate
in a development-team is?
"Michael Girdley" <[email protected]> skrev i melding
news:39e15942$[email protected]..
Yes, that is the best way to do it.
In practice, we have found that each developer having their ownworkstation
with an instance of WLS works best.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"newbie" <[email protected]> wrote in message
news:[email protected]..
I am also pondering on the same problem right now...
I am trying to get an environment setup so that multiple
developers can have their own weblogic "instances" to play
with - so that each of them can start/stop the server,
deploy EJBS etc without affecting one another in a UNIX
environment. to accomplish this - do I just install the
server multiple times with different port numbers on the
same machine or is there a a better way to do this?
Appreciate any input.
Thanks
"john Gongora" <[email protected]> wrote:
I need to run at least two instances of Weblogic on the same machine.
My
Company GE Capital purchases the Clustered version and the BEA Engineerwho
did the install did not know Unix and could not intall the instances.Could
you please give pointers to on how to do this? You can also write me to
[email protected]
Thanks,
John G

TWO IIS virtual directories for TWO WebLogic Instances

Similar Messages

Maybe you are looking for