Two JMS Servers on two different nodes in cluster potinting to same destination.

Here is my JMS configuration:
          <JMSServer Name="transQueueJMSServer_Node1"
          Store="transQueueStore_Node1" Targets="WebServices_Node1">
          <JMSTopic JNDIName="jms.topic.transQueueTopic"
          Name="transQueueTopic" RedeliveryLimit="0"/>
          </JMSServer>
          <JMSServer Name="transQueueJMSServer_Node2"
          Store="transQueueStore_Node2" Targets="WebServices_Node2">
          <JMSTopic JNDIName="jms.topic.transQueueTopic"
          Name="transQueueTopic" RedeliveryLimit="0"/>
          </JMSServer>
          Is it okay to have above configuration? I do not see any problem in my
          testing. But on the startup, second node throws the
          following error message.
          +++++++++++ <Nov 2, 2002 4:03:10 PM PST> <Error> <Cluster> <Conflict
          start: You tried to bin
          +++++++++++ d an object under the name jms.topic.transQueueTopic in the
          JNDI tree. The objec
          +++++++++++ t you have bound from dev_app is non clusterable and you have
          tried to bind mor
          +++++++++++ e than once from two or more servers. Such objects can only
          deployed from one se
          +++++++++++ rver.>
          And the version of the weblogic I am using is Weblogic6.1 SP3. The whole
          point of this configuration is to load balance the nodes.
          I have a MDB deployed on both the nodes listening to queue
          <<jms.topic.transQueueTopic>>.
          Can you guys suggest any alternative options?
          Many Thanks.

Hi,
          There is a configurable on the destination to prevent the destination's
          JNDI name from being bound into cluster-wide JNDI, named something
          like "JNDIReplicationEnabled". The configurable is available
          as a patch on top of SP3. I don't have time to look up the patch
          number, but I know it is mentioned in the JMS performance
          white-paper (available on dev2dev.bea.com) in the
          "emulating distributed destinations" section.
          Tom, BEA
          bkondalreddy wrote:
          > Here is my JMS configuration:
          > <JMSServer Name="transQueueJMSServer_Node1"
          > Store="transQueueStore_Node1" Targets="WebServices_Node1">
          > <JMSTopic JNDIName="jms.topic.transQueueTopic"
          > Name="transQueueTopic" RedeliveryLimit="0"/>
          > </JMSServer>
          > <JMSServer Name="transQueueJMSServer_Node2"
          > Store="transQueueStore_Node2" Targets="WebServices_Node2">
          > <JMSTopic JNDIName="jms.topic.transQueueTopic"
          > Name="transQueueTopic" RedeliveryLimit="0"/>
          > </JMSServer>
          >
          >
          > Is it okay to have above configuration? I do not see any problem in my
          > testing. But on the startup, second node throws the
          > following error message.
          >
          > +++++++++++ <Nov 2, 2002 4:03:10 PM PST> <Error> <Cluster> <Conflict
          > start: You tried to bin
          > +++++++++++ d an object under the name jms.topic.transQueueTopic in the
          > JNDI tree. The objec
          > +++++++++++ t you have bound from dev_app is non clusterable and you have
          > tried to bind mor
          > +++++++++++ e than once from two or more servers. Such objects can only
          > deployed from one se
          > +++++++++++ rver.>
          >
          > And the version of the weblogic I am using is Weblogic6.1 SP3. The whole
          > point of this configuration is to load balance the nodes.
          > I have a MDB deployed on both the nodes listening to queue
          > <<jms.topic.transQueueTopic>>.
          > Can you guys suggest any alternative options?
          >
          > Many Thanks.
          >
          >

Similar Messages

Why can't two different users use Itunes on the same computer with different log ins

Why can't two different users use Itunes on the same computer with different log ins

Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching.

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Welcome to the Apple Community Lschaef5318.
You need one Apple TV for each TV.

HT4061 How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases?

How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases? I want my music to match on both ipad and computer.

Purchases are forever tied to the AppleID they were bought with. There is currently no way to consolidate AppleIDs. Sorry.

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

How can I order two different calendars from iPhoto in the same order?

How can I order two different calendars from iPhoto in the same order?

You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.

How to add data in a table UI from two different NODE

Hello Experts,
We have a requirement to show data in a table which is coming from different node.
Suppose the table has 10 column ( among them 5 are coming from node A and others are coming from node B)
I tried to add node A as a source of the table, and then add individual context to corresponding column element from node A and node B .
Like:
Table Source-->Node A
Table Column1 element value --> NodeA.context
Table Column1 element value--> NodeB.context.
But in this case the problem is, whenever i am trying to add a new row in the table it is copying previous value to the new cell.
I have also tried to add context of B node to A node and then tried to copy data from B node to Anode, but it is saying that Node A is already binded; add or bind element is not possible.
Can any one please help me on this scenario.
Regards,
Sambaran Chakraborty

Hi,
Yes you can do it. In that case you need to add moveTo() function for both nodeA as well as nodeB inside the for loop. Then only both the node's pointer will move with the value of i.
You can use something lik this:
Create a node C and then do the following: (Considering that name,age,desc,empid are the attributes which we are trying to copy to node C )
for(int i = 0; i < wdContext.nodeNodeA().size(); i++){
//Moving the pointer of node A and node B based upon value of i.
wdContext.nodeNodeA().moveTo(i);
wdContext.nodeNodeB().moveTo(i);
//Creating an element for node C.
IPrivateTestApp9View.INodeCElement element1 = wdContext.nodeNodeC().createNodeCElement();
//Copying the attributes values of node C from node A .
element1.setName(wdContext.currentNodeAElement().getName());
element1.setAge(wdContext.currentNodeAElement().getAge());
//Copyingthe attributes values of node C from B.
element1.setDesc(wdContext.currentNodeBElement().getDesc());
element1.setEmpid(wdContext.currentNodeBElement().getEmpid());
//Finally adding that element on to the node C.
wdContext.nodeNodeC().addElement(element1);
Regards,
Jithin
Edited by: jithus on Nov 9, 2011 12:44 PM

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

Is it possible to run two different apple tv units on the same network and play two different movies off of my iTunes library

Is it possible to play two different movies on two seperate apple tv units on two tvs at the same time using the same itunes library

AC is corret you can do that. It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

Keeping two different versions of Jdeveloper in a same machine

Hello All,
This may be a simple question as i am new to this technology.
Currently I am having Jdeveloper 10g installed on my machine.
I am installing Jdev 11g on my machine for SOA Suite installation requirement.
My question is , is there any problem if i install two different version of the jdev in a same machine because i have some important project done in jdev 10g..
After installing jdev 11g , will jdev 10 project get hamper?
waiting for your suggestions
by
Aboo

you can still use the old jdeveloper besides the new one.
i'm also using several jdev versions atm, don't have any problems

Running two different versions of mac os on same machine

I have canon software that only works in 10.4 wheras I'm on 10.5. Initially I was thinking I could use bootcamp to install 10.4 on the same machine and run the software but then I heard about paralels and thought I might be able to do this. Can I run two different versions of mac osx on the same machine, and if so how easy is it to switch between versions?? Thank you!!

tmx3 wrote:
Cool, thanks very much for the advice. If I am running 10.4 on an external is there anything I should bear in mind? Size wise what are the considerations?
I have 10.4.11 running on a small partition on my TM drive on each of my MBPS. They were and are my Tiger backups when I first installed Leopard. They run, I update them and occasionally use them.
Just hold down Option key on boot and the Tiger OS shows up. They are clones, created with SuperDuper. CCC works equally as well.

How can I enable Facetime for two different iTouch (4 gen) using the same Apple ID?

I would like to have each of them have their own distinct email address so I can Facetime them seperately, is this possible? I have two new iTouches for each of my kids, and I want to use one Apple ID so we can all share the same music. they have their own email accounts, but I would like to know if I can assign each of the iTouch with a different email address so I can facetime my kids using their distinct email address. Right now, they are sharing the email address assigned to our Apple ID, so they are ringing at the same time. Thanks!! CL

It is possible to use one Apple ID with Face Time and Messages by adding email addresses and setting the "you can be reached at" and "Start a new conversation from" in the settings for each device. This method does not work well though.
Your best option is to set each kid up with there own iCloud/Apple iTunes Store account (Apple ID) using their own email address. Then on each device set the iCloud Settings on each device to their specific Apple ID. Set the iTunes & Apps Store settings to use the main Apple ID for store purchases. With this setup each user will have their own distinct iCloud account which will not interferer with the others yet still make purchases from the main one.

How do I keep two different iPads from having all the same apps

I have an IPOD Touch and an IPAD 2. My wife would like the IPAD 2 since I am getting the new iPad. Right now the IPOD Touch and the IPAD have all the same apps on them, since I cannot create a different configuration for each one. Now that I am getting the new IPAD, how do I set up a different sync configuration for each of the two IPADs? Right now I have to manually delete the IPOD Touch apps from the IPAD each time I sync, since they do not display correctly on the IPAD (small screen in middle of IPAD). I just wonder if I have to manually remove my apps from my wife's IPAD every time I sync the IPADs in ITunes. She does not want all the stuff I currently have on my IPAD. I use an iMAC for the sync.
Thanks

It sounds like you're using the same AppleID to purchase apps for all devices, is that right? If so, you need to make sure that
- You turn OFF automatic downloads for Apps (on the device, Settings, Store, Apps, turn off downloading)
- You manually sync each device through iTunes (once you connect the device, or if you sync through wifi, you can specify which apps get synced to each device). In the Apps tab in iTunes, make sure you only select the apps you want to be on that device.
Matt

Can i use home sharing when two different apple accounts are on the same computer?

will home sharing work when two iTunes Libraries are on the same computer?

Can you be more clear about what you mean. More detail please.
Is this the solution you are looking for?
Log in to both user accounts and launch iTunes. Turn on Home Sharing from the 'Advanced' menu at the top of the screen.
Leave iTunes running and use Fast User Switching to switch between user accounts. You will notice that each user's library of media is available to the other user and you can copy media from the other user to the current user's account.

Two different WCS instances, pointing to the same database

Hi,
for some unknown reason that came from the architecture fellows, I need to install 02 instances of WCS pointing to the same database server. I mean, both instances would need to "share" the database. They don't want a cluster schema because they need to have the option to deploy the app in one instance and, if wverything is ok, deploy to the remaining instance.
Do you know if such architecture is possible? I did the installation of one instance(instance A), but when trying to install the instance B referring to A's database, I get a ton of errors.
Any advice is much appreciated.
Regards,
Vinicius
Edited by: 1000164 on Apr 15, 2013 8:18 PM

Hi,
This is not the way Sites has been designed. Each instance should have their own schema and repository unless the two instances work as a Sites cluster.
So what you're trying to achieve is not possible using your approach. What I could suggest is to install two separate instances on its own, create the necessary data model, asset configurations, templates, etc. in one instance and replicate it to the other instance by publishing it to the other instance using real-time publish. If you use LDAP or any other supported directory server you would be able to use a singe directory for both sites instances.
Regards,
Rodney

Two JMS Servers on two different nodes in cluster potinting to same destination.

Similar Messages

Maybe you are looking for