Two .jpgs (one on top one directly below it)....

Hi,
I am trying to do a basic layout in Dreamweaver and I cannot seem to make this work.
I have two .jpgs and they are both 834 pixels wide. I want them to line up one on top and the other directly below it, (both centered on the page).
1) The first image is my header. This image must be set as the background so that I can place a table on top of it.
2) The second image is the body, and I want to put hot spot links on it, so that it opens another pages and plays videos.
What is the most straight forward way of doing this?
Thanks,
Gary
Here are the two images.

You are not employing the most efficient way of creating this page, but I am going to answer your question as it is.
You place the jpgs in two separate divs, one on top of the other. Something like this:
<div id="header">
<img src="images/taffylogo.jpg alt="taffy logo" width=834 height=150 />
</div>
<div id="content">
<img src="images/videos_bottom_half.jpg" alt="body of page" width="834" height="900" />
</div>
This is just an example; I don't know what your exact values are. You might also use css for a different presentation (for example, if you wanted to make the header img a background image instead of using the img tag).
For the hotspots, you would use the map element (html) which is a container that will define your areas (hotspots). Do a Google search for a tutorial on how to do this.

Similar Messages

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

I save two copies of an image, one jpg, one tiff. LR will not display the jpg or let it be available, only the tiff. When I try to put another copy of the jpg into the folder LR says the jpg is already there.e

I converted an rgb image into a grayscale image and saved two copies, one jpg, one tiff, into my chosen folder.
I tried to import both into LR, which only showed the tiff in the import dialogue. After import LR only shows the tiff in the folder but when I try to insert the jpg into the folder using Explorer LR reports that the jpg is already in folder.
How can I get LR to display this jpg image?

Hi,
I have an example here that is intended to demonstrate the difference between Positioned and Flowed subforms: http://assure.ly/i8pSdy.
This shows how you can use a slider to change the dimensions of the image object.
I have extended this to an example with buttons to scale the image: http://assure.ly/i8ZI5Y
This may not be fine enough for your purposes, but it may give you some ideas.
Good luck,
Niall
Assure Dynamics

How do I update Adobe as per my previous question. I have followed the 3 step process. Step one and Two fine but step 3 just directs me to purchase and application. I want the "Free" upgrade. How do I get It. ????????

How do I update Adobe as per my previous question. I have followed the 3 step process. Step one and Two fine but step 3 just directs me to purchase and application. I want the "Free" upgrade. How do I get It. ????????

YouTube does not use Adobe Reader. Videos do not use Adobe Reader.
Adobe Reader is used only to show files in a special format called "PDF".
What you are having problems with is probably Adobe Flash Player.
So, if you are trying to solve problems with Adobe Flash Player by downloading Adobe Reader, or even Adobe Acrobat, it isn't going to help you in the end. Is that what is happening (we can't really tell without screen pictures, but it seems a likely guess).

MAC OS Yosemite - CS6 - A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one

- A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!

Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.

Rectangle bleeding in one direction

I apologize in advance if this is a lame question. I would like to have a shape (rounded rectagle) bleed off the browser only in one direction. Is this possible?
(see below)

This is how the shapes looks right now in preview:
I would like the purple and green rounded "rectangles" (top right) to bleed off the browser like the image of the woman below it. I can do it if the shape spreads the entire width of the browser, but I was wondering if you could do it just off to one side like below.
Thank you!
Sarah

So I have purchased every song on the Up All Night album by One Direction but it isn't showing up as Purchased in the iTunes store and it isn't saying that I can download the iTunes LP...help!

I bought every single song on the Up All Night album by One Direction, but iTunes is not showing the album as purchased when I'm in the iTunes store. It doesn't even have the complete my album option. It's showing as full price and I don't want to pay $12.99 just so that I can have the iTunes LP. However, I do really want the iTunes LP. What do I do?

Then you need to click the link below and fill out the email form to the itunes store about the issue
http://www.apple.com/support/itunes/store/games/

Aironet 1310 Bridge high retries one direction

We are experiencing a high amount of retries in one direction between two 1310 bridges with external yagi antennas. What would this indicate? Here is a copy of the linktest:
POOR (102% retries) Time   Strength(dBm)   SNR      SNR          Retries
                     msec      In     Out    In      Out         In   Out
      Sent :5000, Avg   5    - 66    - 64    31       45   Tot: 56 10149
Lost to Tgt:   0, Max 49    - 4    - 60   223       50   Max: 12     9
Lost to Src:   0, Min   1    - 72    - 70    22       40
Rates (Src/Tgt)     1Mb 0/2 12Mb 25/25 18Mb 808/807 24Mb 366/366 36Mb 568/56 7 48Mb 1015/1013 54Mb 2218/2219
Linktest Done in 28.106 msec

Good morning,
When (1) bridge had abnormally higher retires than say the other bridge(s) this can be due to a few things. Check the config of the bridge for any odd configurations like packet shaping. Perhaps one bridge is allowing larger packets and these packets arent making it and have to be resent.
Check the phyiscal bridge solution. Is everything tight and weather proof tight. Is the antenna is good shape. Are the cables exposed in anyway.
Also what PERCENTAGE of retries are you seeing ?

Google iPhone Sync Microsoft Exchange - Sync only works in One Direction

I have setup my iPhone to sync with Google calendar using Microsoft Exchange, which supposes to work bidirectionally.
I found that it only works in one direction such that anything in my Google calendar (includes all the subscribed calendars in Google) got sync to my iPhone. After I add a new event in my Google calendar, it is pushed to my iPhone.
On the other hand, any new event I add to my iPhone calendar is not updated and shown in my Google calendar. This means the sync works only in one direction:
Google Calendar Event --- sync ---> iPhone (works perfectly and the event is pushed almost pushed instantly)
iPhone Calendar Event. --- sync ---> Google Calendar << FAILED >> (Event entered to my iPhone never shows in the Google Calendar)
Sync works unidirectionally but not bidirectionally
Anyone has encounter this problem and is there any solution?
Message was edited by: Stanley Wong
Message was edited by: Stanley Wong

I don't think the solutions here are for the question that's posed.
I have an Exchange account set up on my iPhone 4. I want my Exchange calendar to sync with my Google calendar. I set up Google Sync, and I can see both calendars. However, there doesn't seem to be a way to get the two calendars to sync with each other. i.e., if I create an event on my iPhone, it doesn't push to both calendars. I have to pick one or the other.
The solution Stanley Wong suggested only sets Google as your default calendar; it doesn't actually sync the calendar events between the Exchange and the Google calendars. Unless I missed something?
Is there a solution for actually syncing the two calendars with each other? It seems like we should be able to create an event on the iPhone and have it sync to both phones without having to have Outlook open on a PC and using Google Calendar Sync to do that.

Logitech G400 mouse wheel only works in one direction

Hi All,
I just purchased a MacBook Pro Retina 15" version and I plugged my almost new Logitech G400 into it and I notice that the scroll wheel on the mouse only seems to work in one direction. I've installed the logitech gaming drivers, but there aren't arent scrolling options in there, so I suspect that it's Mac OS that's to blame here.
By default it was only allowing me to scroll to the top of the page by scrolling the wheel down. I've since reversed this, so that when I scroll down, I move down the page - the problem being if I scroll to far I then have to use the trackpad. As stated, I have tested the mouse as working in a Windows 7 machine, so I suspect this is a problem caused by the OS.
Has anyone experienced this issue and if so, how did you fix it?
Thanks,
Craig

Doing what they did in the video is fine - up to a point. After a while however the clogging gets so bad the method shown won't work anymore. Dampening the cloth helps somewhat, but not for long.
Mine finally got in this condition so I took it to my local Apple Store. The Genius there cleaned it with a surgical swab (the type the nurse wipes your arm with when about to stick a hypodermic needle in it). Did a good job too. The Genius had a supply of about 200 with him and let me have a few.
I have found that this is the only lasting way to clean the roller. But it doesn't stay clean forever of course and also I eventually ran out of the gratis swabs.
Since I ran out of these swabs my mouse has gummed up all over again. In fact it has been like this for so long now that I have abandoned it in favour of the Magic Mouse. I only use it now when booted into Safe Mode or from a Boot CD as the Magic Mouse doesn't work in these situations.
Yes, I know the Magic Mouse is a tad more expensive than a box of surgical swabs, but have you tried going into your local Chemists and asking for these surgical swabs lately?. The idiots won't sell you any because they assume that you are a junky and only want them for injecting yourself! I kid you not.

Please help: Two-Sided One-to-One Mapping issues warning when owned instance does not exist

Hello,
Is it expected behavior? I have two classes A and B, B references A and its
foreign key column is its PK
A owns B (marked as inverse-owner in JDO metadata) when I access A.getB() if
B does not exist I get a warning.
Is it to be expected? Does two sided relation always require presence of
both sides of the relation and does nto fit my need?
Is there any way to have bi-directional association in my case with owned
record being optional?
Should I use two simple one sided one-to-one or may be simple one sided from
child to owner and One-to-One with Inverse Columns from owner to child
What are disadvantages of using two one sided (simple and inverse) vs.
two-sided?
Thank you
Alex

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

HT4262 I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate.

JSplitPane (only allow collapse in one direction)

Is there a way to allow the JSplitPane to only collapse in one direction. For instance my application use a JSplitPane and it should only be able to collapse to the left (hence I need to remove or disable the little arrow that points to the 'right' since that would screw things up). Any ideas?

pamelak855 wrote:
Helllo. I hope someone might have an answer. All of a sudden, my network magic is only working in one direction. I can access shared folders on my desk top from my lap top, but cannot access my laptop's folders from my desktop.
The desktop is Windows XP. The Laptop is Vista 64 bit. NM version is 5.5.9195.
This had previously been working fine. I went thru Norton on both comouters and changed the settings as per the firewall troubleshoot section.
Please advise. Thanks!
Pam
Hi Pam,
Check the settings on the Vista 64-Bit Laptop, in Network and Sharing Center. Make sure that when you upgraded Vista, that the settings did not changed from Public.
Also, make sure that the folders being shared are existing only on the Internal Hard Drive and not on any External Hard Drives, plugged into the computer via an USB Cable.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
I have chek the DNS and nslookup all are correct but this is generate error.
Is this possible Mumbai location join with this Domain(CAPLDC)???
One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
Pls find the error message below and also find the attachment.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "capldc" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
The following domain controllers were identified by the query:
capldcserver.capldc
win-dyfq2poc88q.capldc
However no domain controllers could be contacted.
Common causes of this error include:
- Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
- Domain controllers registered in DNS are not connected to the network or are not running.
Pankaj Kumar

Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
Please refer to the articles below to fix your current issue:
http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Port Disable for traffic flowing only one direction

Hi,
We use some Catalyst Express 500 and ESW-520 in our company.
But with the Catalyst Express 500 we have problem that we can't arrive to explain.
Some Gi port turn disable with this log error message :
Description: Gi1: This port is disabled because the traffic is flowing only in one direction. The cause might be incorrect cabling.
Recommendation: Make sure that cable is properly connected to the ports. For fiber connections, ensure that the transmit and receive fibers are connected correctly. Disable and Enable the port.
For the recommandation the cable is right, we change it and we change the switch by an other and the probleme continue.
If we change with a ESW-520 the problem don't arrive, but we can't change all our old switch for moment.
Any idea about this problem?

Hi Guys,
Thank you all for your help. The packet was being dropped on the "implicit rule", that means that the packet was not finding an ACL to match.
I checked the ACLs that the VPN Wizard generates by itself when used to configure an IPSec connection, and the ACLs where correct and "before" the implicit rule . (They are called by default outside_cryptomap_"number")
It seems that since I am not using "sysopt connection permit-vpn" I have to add the same ACLs to the "Local Network" interface (VPN_LAN).
Since there was inbound ACLs related to the VPN_LAN interface, the firewall jumped directly to the "implicit rule".
So the result is that I have two times the same rules first inbound on the VPN_LAN and second on the default outside_cryptomap ACLs.
Greetings,
Daniel

Two .jpgs (one on top one directly below it)....

Similar Messages

Maybe you are looking for