Two Problems Encountered with FCE

As I was in the middle of editing a sequence, the following message appeared:
"Error: Out of Memory"
I know that ought to be self explanatory, but could someone please elaborate?
Another issue I run into is that on occasion, FCE will unexpectedly quit, whereby I will have to reopen and start from the point I last saved.
I'm curious as to whether these problems encountered are related to me working with multiple projects simultaneously--looking at my Mac's specs, am I operating beyond its capacity?
Thanks.
iMac 2.16GHz Intel Core 2 Duo Mac OS X (10.4.8) Final Cut Express

I often have Photoshop CS, LiveType, SoundTrack, and Safari open at the same time as FCE.
That would explain your out of memory problems. All of them are heavy users of memory, especially PhotoshopCS. Try not to have them running at the same time you're editing in FCE. You can't use all of them at the same time anyway. Photoshop+FCE ...or... FCE+LiveType ...or... FCE+SoundTrack I could see depending on what you're doing, but not all of them at once.

Similar Messages

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Does anyone have a link to common bugs/problems encountered with flex 3?

Hi,
does anyone have a link to common bugs/problems encountered
with flex 3, just so i can try and familarise myself before I go
asking etc? thanks folks!!

flex warnings:
http://livedocs.macromedia.com/flex/2/langref/compilerWarnings.html
flex errors
http://livedocs.macromedia.com/flex/2/langref/compilerErrors.html

TS1363 Help with Problem encountered with iPod Touch 5th gen After performing Sync.

Hello Friends.
My name is Joaquin. I was wondering if anyone can help with a problem I have encountered with my iPod Touch 5th generation running under OS 7.0.4.
After performing a Sync, a lot of the song in my iPod showed a red icon beside the song. It is the same Circle with a square in the center icon that shows the download progress status that you see when updateing APPs, etc.
The songs play perfectly in my computer library and in an old iPod Classic but not in the iPod Touch. The only difference was that when I connected the iPod I got a message stating something like "Transfer purchases from iPod touch to computer" despite of the fact that I did not make purchases from my IPod.
I will really appreciate the help. I can´t survive without my music. Thank you in advance.
Regards,

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network. Yes
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before? no
Try the following to rule out a software problem: (Not clear what you did)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Since it connects to other networks that indicates a problem with your network
Apple Retail Store - Genius Bar

Problem Encountered with Latest (as of 8/2/08) Security Update

I just updated the latest security update both on my powerbook and Mac Pro. My Mac Pro went into an infinite loop upon restart. Powerbook did OK. Did anyone encounter the same problem. I had to power down my Mac Pro and restart again and it went well the second time.

Our household has three Macs, a Mac Pro G5, an old Mac Mini and a Macbook Pro G4, all running Leopard. Two out of the three machines would not work after taking Security Update 2008-005.
The Pro and the Mini would not restart and had to be turned off manually. When switching back on, the Mini kept restarting itself. The Pro would get as far as a flickering blue screen with a spinning daisy chain. Same update, two different problems. Neither could be started in safe mode or from an external hard drive.
The Pro's hard drive was restored using the Leopard install disk and a time machine backup, the Mini had a complete reinstall. They now work perfectly.
I am absolutely positive that the latest security update was the problem.

Problem encountered with Adobe premiere Element 4 et DVD sony Handicam

I have a sony Handycam DCR/DVD203E . Window Vista edition familiale premium service pack 1 .Adobe Première Elements 4 .
I take 10 rushes of 2 minutes each . I finalised the DVD for importing it on my computer under Adobe Elements 4 .
When i do " add médias " , I only get two files , one called VTS_01_1.VOB which is the total of my 10 rushes but it's only one rush of 20 minutes .I get also an error message " C:\users\Videos\20081125\VIDEO_TS... FORMAT ERROR or file correupted/a component needed is may be not installed .
I shoud get my 10 rushes of 2 minutes instead of one rush of 20 minutes film .

Just a few clarifications first. Rushes, are the quick (hence the name rush) optical prints made from cine negative film. Their intention is for viewing, quickly, the results of the previous day's filming. They are not color corrected, or manipulated in any way. They are also not edited, other than being spliced together, take after take, so the crew and decision-makers can see what was captured. These are usually discarded soon after selections are made and decisions are finalized. The original negatives are then cut in the editing process and, when complete, are printed to positive projection stock with color and density corrections. Now, the final output is more often some digital format for commercial distribution.
What we have are 2 min. Clips, in digital capture parlance. However, lets go back a moment to the first paragraph. Just like the negative film stock, this Sony camera shoots to DVD. Just like cine negative, with an editing workflow, something else has to be done. Unlike the negative film stock, the DVD can actually be viewed in an optically correct, albeit unedited, format.
The .VOB files on the DVD are part of the inherent file structure of that medium, the DVD-video and are made up of MPEG-2 (DVD-spec) compressed files with very specific criteria. Unfortunately, the aspects that go into creating an instantly viewable medium, add some problems to doing any editing with it - first there is the structure .VOB, next, the initial compression to MPEG-2. Neither is ideal, if one plans on using an NLE (Non-Linear Editing) workflow. The .VOB structure will have to be converted at some point, and the MPEG-2 compression will have to be decompressed into another format, and most likely, be re-compressed back to MPEG-2, if the final output will go to DVD. Substitute that second MPEG-2 re-compression with Flash, WMV, or whatever, should the intent be streaming media.
Steve has addressed the problem head-on, which is a good way to tackle it. This is intended to just add a bit, to what he has already written, not to correct anything, or change anything.
With the proliferation of more and more non-tape capture devices, i.e. cameras, on the market, one must make a conscious decision, as to what they will ultimately wish to do with the footage captured. While it CAN be edited, with certain limitations, it is first designed to be viewed in its raw form. It handles this last job well - just pop the DVD/mini-DVD into a player and view, or hook the camera directly to the TV (or through other devices attached to the TV) and view. Editing, however, becomes a bit more complex, and needs to be well-thought out, and planned for.
The FAQs, at the top of these pages, go a long way to helping make informed decisions, come editing time. The compromises are outlined pretty well. Yes, there
b WILL
be compromises, as the medium is not designed to be editable in the first place. It is a delivery/viewing medium. This should be a strong consideration, when shopping for a video, or still/video camera. What will I want to do with the material generated by that camera? Do I want to just record and view, or do I want to edit, before the final presentation of the material? If one is here, in the Adobe Premiere Elements (or Premiere Pro) forum, then it is likely that some editing is intended. If one has gone with a tape-based capture device, the editing path is clear - Capture, edit, Export. If one has gone with a HDD (hard drive), DVD, magnetic storage camera, decisions have to be made and some planning must go into the process of editing. Then is the time to learn the proper workflow (will differ dependant on the exact process of capture, that the device uses), and will pay dividends. Learning what compromises will have to be made and how best to keep these to a minimum, will be needed.
The ease, with which these non-tape devices capture the footage, does not belie what lies ahead, should one wish to later edit. They seem so simple - shoot, then view. However, there the simplicity ends. It is later editing, that must be heavily contemplated. These forums, and especially the FAQs (remember, they are at the top of the main pages) are a good place to learn what comes next. The simplicity quickly peels away and a lot of new techniques need to be learned. As Dorothy commented, were not in Kansas anymore, Toto... If one wishes to get good results from the editing of this type of material, they need to be ready to learn. This might also be an instance, where learning by reading (first), is far preferable to learning by doing. It is far less frustrating. One also needs to be ready to dig deeply into their toolbox, which might well contain a lot of extra programs, to accomplish the task, in the best manner. Even for tape-based editing, one can never have enough tools in that toolbox, i.e. 3rd party utilities and programs.
As an aside, I use PEs big brother, Premiere Pro, for my editing. However, I picked up PE as another tool in the process, as it does some things better than big brother does. Never be shy of using the right tools, even if it means that you have to go outside of PE and even Adobe.
Hunt

License Exception Problem Encountered With CDs from Dev2Dev Conference

We just attended a great BEA Dev2Dev conference at which we were each provided
a complimentary BEA WebLogic Platform 8.1 CD with the one-year development license.
After the conference, we were all excited to install the CD and apply some of
the techniques we'd just been shown at the conference. The problem is that we
cannot get the installation to work correctly, as described. We continue to get
"LICENSE EXCEPTION" when we attempt to launch anything.
-- The instruction say the CD would provide the requisite "license.bea" (one-year)
file in our
BEA_HOME directory (c:\bea). However, no such file exists. In fact, that file
doesn't exist anywhere on the system. We tried this on three different computers,
using two different CDs that were provided. One one of the computers, a previous
version of WL7.0 was installed. It was fully de-installed. The third computer
has never had a BEA product on it, so there should not have been any conflict.
-- We used only default settings. OS is WinXP with more than enough RAM and disk
space to handle BEAWL8.1.
-- We used the SmartInstall program that comes with the BEA CD that was handed
out at the conference.
Can you tell us what we need to do to make this product work? Our enthusiasm
from the conference still continues, but frustration is starting to set in.
Thanks,
Doug

Well, as it turns out, the literature is a bit wrong, but the CD is correct.
The literature says the installation program will place a copy of "license.bea"
in the BEA_HOME folder (typically c:\bea). This is not the case. What is the
case is that after you run the installation program from the CD, there is a link
at the very bottom-left corner of the HTML page for you to go out an grap the
license specifically for the installs based on the CDs from Dev2Dev offerings.
"Douglas" <[email protected]> wrote:
>
We just attended a great BEA Dev2Dev conference at which we were each
provided
a complimentary BEA WebLogic Platform 8.1 CD with the one-year development
license.
After the conference, we were all excited to install the CD and apply
some of
the techniques we'd just been shown at the conference. The problem is
that we
cannot get the installation to work correctly, as described. We continue
to get
"LICENSE EXCEPTION" when we attempt to launch anything.
-- The instruction say the CD would provide the requisite "license.bea"
(one-year)
file in our
BEA_HOME directory (c:\bea). However, no such file exists. In fact,
that file
doesn't exist anywhere on the system. We tried this on three different
computers,
using two different CDs that were provided. One one of the computers,
a previous
version of WL7.0 was installed. It was fully de-installed. The third
computer
has never had a BEA product on it, so there should not have been any
conflict.
-- We used only default settings. OS is WinXP with more than enough
RAM and disk
space to handle BEAWL8.1.
-- We used the SmartInstall program that comes with the BEA CD that was
handed
out at the conference.
Can you tell us what we need to do to make this product work? Our enthusiasm
from the conference still continues, but frustration is starting to set
in.
Thanks,
Doug

WEIRD PROBLEM ENCOUNTERED WITH THE USER IN PRODUCTION

Hi All,
I have a bit weird issue out here to share with you guys also with the interest on the feedback.
In production & the specific user ID:
1. When User logs on with his/her credentials the output expected for the customised object is different with that of Q & D. Version comparison done no issues.
2. When user logs on & click on the display of program in SE38 or duble clicks the program to display in SE80 the entire SAP session logs off.
2. When user logs on with the same credentials on the other machine its OK & merry christmas.
3. When some other user logson the affected users machine its alrite.
4. The transaction which exists for other user throws the status message that it doesn't exists for the effected user on his/her machine.
any feedback/inputs on this?
Thanks & BR.
Vinay.

Hi Vinaya
I had this problem before, and the only way to fix it is, uninstall the entry SAPLogon and try to install it back. Try to install the same version that is working in the other computer.
Please let me know if this helped you!
Regards
Jesus Martinez

Two problems encountered while trying to send out a customized digital signal (TTL)

I'm trying to write a labview program to send out a customized TTL signal when it's triggered.
The error message showed that "start trigger" is not supported but I followed the example "Write Dig Chan-Int Clk-Dig Start.vi" which uses start trigger. If start trigger can't be use, what should I modified my code so it can be triggered from hardware?
The other error is 200463 which I can understand the description shown in error message but have no ideal how to correct it.
Can anyone please help me with these? Attachment is the code. Thank you.
Attachments:
Customized DO.png ‏23 KB
Untitled 2.vi ‏22 KB

What is your hardware? The "not supported" error message usually means that the device you are using is not capable of what you are asking it to do, in this case a digital start trigger. The help for the examples often lists devices with which that particular example will work. Is your device on the list? Does the device manual specify that it can use a digital start trigger?
Lynn

Any known problems with FCE-HD and "Capture Now" or edits

I've been working with FCE for almost two years now. I've had the same problem ever since-- The SPINNING PINWHEEL OF DEATH when: playing back edited video from the timeline and the playhead passes over various edit points, usually cuts. Is it a CAPTURE problem, or camcorder RECORD problem, or something else? I use a SONY DCR-TRV38 with firewire; FCE-HD;
Any thoughts on why I get this problem so often, and what I can do to avoid it in the future? should I just switch to Avid or Premier??
Thanks for any help...
Shawn

Hi Shawn.
I don't think there is a "known problem".
I assume your HDs are not more than 75% full or fragmented?
If you have not already done them, try the old chestnuts of Trashing the Preferences and Re-installing FCE.
1. Make sure you trash all 3 of the Preference Files as detailed in this article:-
http://docs.info.apple.com/article.html?artnum=93690
2. If that does not work then re-install FCE but make sure you delete all the old FCE files first as shown in this link:-
http://docs.info.apple.com/article.html?artnum=301182
Good luck.
Ian.
PS. When you write in with a problem, remember to give all possible APPROPRIATE details eg.
Computer model and external Hard Drive.
Operating System.
FCE version.
Camera type.
Did the problem suddenly occur or has it NEVER worked?
Have you recently loaded new Software or Upgraded ANY programs, Operating Systems etc.
Have you moved or altered your source files?
Have you captured the clips from a DV camera or an A/D Converter etc.?
Is it Standard or High Definition Video?
What type of files are you using?
Also include details of exactly what you were doing before the problem occurred.
Is your film hours long and filled with numerous transitions and effects etc.?
THIS IS A GENERAL LIST. SOME OF THEM WILL NOT APPLY TO YOU.

I am experiencing two problems with iTunes on my iPhone 5s.

I am experiencing two problems with iTunes on my iPhone 5s.
Issue 1: iTunes Match
Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
Issue 2: iTunes Preview Track
I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
No aftermarket apps on iphone 5s
Latest iOS 7 on iphone 5s
Latest itunes 11.1.5.5
Running Windows 7 (good comp)

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Two AM's with the same name but different forms causes Deployment problems

Two Masters forms, DOC & PM are cloned except for the "where clause" in the View's query and the titles in their JSP's.
DOC workspace has a BC project and a BC4JSP Project. The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='DOCTOR'.
In Java Webserver :-
The JSP's are located in C:\source\Doctor\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\Doctor\pol_ValueSet\..
If I execute Doctor in JWS the records are getting filtered properly.
PM workspace has a BC project and a BC4JSP Project. Again The BC project comprises of the EO and VO named ComVsStaticValue. In the Edit prop-> query for the VO I have specified the "where clause" as VSSV_VS_CODE='PAY_MODE'.
In Java Webserver :-
The JSP's are located in C:\source\PMode\ .. and the *.xml and *.class files generated by the BC proj is in C:\source\PMode\pol_ValueSet\..
If I execute PM in JWS, the PM's JSP comes (the title is correct) but the records pertaining to DOC appears. I checked the View's xml file in C:\source\PMode\pol_ValueSet\ the "where clause" is correct. The xml & classes have the same name but their contents are different.
I want to know whether this problem is because both have the same name for the AM and the BC4JSP's property file.
Please clarify.

Deploying two app modules with the same name will definitely cause problems.
The JSPs use the information in the properties file to connect to the application module and get the data they need from the appropriate View Objects in those app modules. If you have two app modules with the same name, when a JSP tries to connect, it has no way of knowing which one of the app modules to connect to if they both have the same name.
You could:
1. Just use one application module that contains all the View Objects you need to access.
or
2. Rename one of the application modules or the package it is located in so the names are distinct. If you choose this method, you will also need to update the JSPs (specifically the 'registerApplicationFrompPopertyFile' method call), and your JSP project's appmodule property file.

Having TWO problems with my iPod mini.

I've had my ipod mini for a year and a half. I only ever use it 2-3 times a week for 30 mins at a time at the gym, and sometimes in the car. Already I'm having two problems.
Problem #1- Battery. I've noticed alot of other people on here seem to be having this problem aswell. I'll charge it fully and leave it in the charger over night. I disconnect it, Start playing it, and 1 or 2 songs later I get the message saying "battery low, please connect to power source" It just came OFF a power source. I have 2 different ways that I charge my ipod. I use the computer. And I have a clock radio that it sits in to play the ipod and charges it at the same time. It dosen't matter which I use.. I have the problem either way.
Problem #2- When the battery actually is working(which is rare) sometimes the music sounds like it's under water. Basically, The music plays, but with very low bass. I usually either listen to it through my car adapter, or through my headphones and I get the same problem either way. This isn't all the time though.
I've never dropped it, gotten it wet or left it in the sun. It's had no physical damage at all.
Does anyone know what may me going on? I've followed the steps and tips from other posts on the battery issue but nothing has worked for me. The only thing I can think of (and probably the only thing anyone can recommend) is that I send it in to get it repaired. However, I refuse to do that. I don't think I should have to pay to repair apple's 1.5 year old products especially since I paid close to $300 for it in the first place. I also don't want to receive a refurbished one, I want MINE fixed or a brand new one(which I know won't happen).
Any suggestions would be appreciated.

1. Place 1 drop of rubbing alcohol on the home button.
2. Press the button repeatedly with pencil eraser making sure to get liquid into area surrounding button.
3. Dry off area with paper towel.
4. Press home button until it works again.

Two problems with Snow Leopard

I have two problems since I upgraded to Snow Leopard that I can't figure out how to fix. I have a Mac Mini hooked up to my TV and I from time to time remote into it and since upgrading I am getting an additional icon in my shares. If I click on it there are multiple copies of the drives on the mini. My time capsule does the same thing.
A screen shot is here.... http://farm3.static.flickr.com/2705/4143158869180c412585o.jpg
The second issue is when using spaces with keyboard short cuts the spaces icon that appears to show you which space you are moving into does not disappear after you have moved into the space. The only way I have been able to make it disappear is to select the space with the menu icon. When I do this it does disappear.
Anyone have any ideas about these problems??
d

You need Lion and iCloud unfortunately; iCloud is not supported by Snow leopard.

Two Problems Encountered with FCE

Similar Messages

Maybe you are looking for