Two proposed solutions for iOS TOS not allowing runtime code

I understand that loading runtime code is prohibited by Apple iOS TOS. Fine. I am willing to compile all my resources into one big SWF to get the job done to meet the legal requirements.
However, in our setup (and I imagine for many projects) it's not possible to do this easily. Different SWFs are owned by different teams - it's actually part of what makes the Flash ecosystem so great and the workflows so powerful.
The easiest solution is embedding all my assets, which I assumed would work but it didn't, becasue the [Embed] tag uses Loader, which under iOS nixes embedded actionscript.
Porposed solution #1:
It seems to me to be in the spirit of the TOS to allow actionscript code in SWFs that are embedded into the iOS actionscript code, because all of this code was available at compile-time and at packaging-time.
    [Embed(source="myAnim.swf")]
      private var anim:Class;
Code in the embedded myAnim.swf should be allowed. Technically the only reason it isn't is because embed's result in a Loader - merely an implementation detail. If this isn't acceptable...
Propsed solution #2:
What about a new feature to meet this need: [LinkedEmbed] that results in a statically linked class compiled at compile-time and not Loaded at runtime?
    [LinkedEmbed(source="myAnim.swf")]
      private var anim:Class;
Thanks for your time and consideration,
-Jeff

Ok, truth in advertising, these aren't "solutions" in the sense that they don't allow runtime code, but they are workarounds to ease the transition of Flash-platform workflows to iOS, which is what AIR is supposed to be all about.

Similar Messages

Iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

Thank you for such a quick response. Most of the things brought out in the article I had already done, but there were some others that I would not have thought of. Thank you again for directing me to this site. I will have to see now if this will increase the battery life any.
MaggieIB

Note for FAPP column not allowed

Dear All,
We had this error message " Note for FAPP column not allowed " during
execution of appraisal form. Upon debugging, we found out objective
setting entered has been truncated and updated into Final Appraisal
column where this column has been set to "No Note".
Please share with me if anybody has come across with this issue before.
Thanks and best regards,
Khairul

>
Khairul Nizar Rhazak @ Ani wrote:
> Hi Michael,
>
> Thanks for the reply.
>
> I would like to understand further on this as we are not able to replicate this error in our development system. Kindly, please share with us if there is any step we can use to replicate the error and work on permanent solution.
>
> Currently, we are having more than 10000 employees in Asia Pacific affected by this error and we are working on cleaning appraisal form manually.
>
> Thanks in advance for your cooperation.
>
> Khairul
i think to try to replicate you need to have two clients in dev, 1 for config, 1 for testing to replicate the problem
in ur config client take your production template, copy ithe template and make a test template.
transport this new test template into the test client.
generate employee documents for this test template, start processing the employee docs, but don't finish them..
go back to config client with your test template. unrelease the template, remove the notes field, remove a column, release and transport your template. transport now the updated test template to the test client. Test on the previous employees. if you can't replicate, create new employee documents based on that version and repeat the cycle with other changes...
this only a guess as to why you would get a weird error like that. anyways, since it's a production problem you should probably be opening a high ticket with sap.
the bad news if this is your problem, it will be very hard to correct in production...

Goods receipt for purchase order not allowed for a particular wbs

hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

Update error: POL - 4008 null buffer for attribute is not allowed

I am attempting to update a column in my Oracle Lite database through JDBC.
The statement is:
ds = getDataSource();
conn = getConnection(ds);
stmt = getStatement(conn);
int results = stmt.executeUpdate("UPDATE SYSTEM.PM_PASSENGERS SET CURRENT_STATUS_EVENT_ID = 267 WHERE PASSENGER_ID = 1");
System.out.println(results+" rows affected.");
conn.commit();
which results in the message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 rows affected.
[POL-4008] null buffer for attribute is not allowed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I am not sure what that means exactly. Does that mean there is some problem with the commit?
Thanks,
Allen

Is it necessary to update the entire record in Oracle Lite, or should it be possible to update select columns only when performing an update query?
Thanks,
Allen

Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

"Create quotation for order" is not allowed (ORD 80000119 )

Hi,
After creation of service order I want to create quotation then system gives error massage as below,
"Create quotation for order" is not allowed (ORD 80000119 )
Message no. BS002
Diagnosis
The transaction 'Create quotation for order' is not allowed for ORD 80000119, because no status is set to permit it.
System response
You cannot carry out the transaction 'Create quotation for order'.
Procedure
You can carry out this transaction if you set a user status, which permits 'Create quotation for order'.
Thanks & Regards
kapil

Kapil,
Check the System status and user status of the order. Quotation can be created only before releasing the order (REL). or Any user status that may prevent creation of Quotation.
Babu

JMS Adapter (for DI) does not allow passing username and password to JMS connection

Post Author: PLed76
CA Forum: Data Integration
JMS Adapter (for DI) does not allow passing username and password to JMS connection. It has those fields only for MSMQ. Our Production environment does not allow us to connect to JMS (we use Tibco EMS) anonymously, so it prevents us from use of Data Integrator. Is there any way to pass those params, or obtain the correct version of JMS Adapter, or obtain source codes of the JMS Adapter so we can correct them ourselves (we can send you the corrected sources back) ? Thanks in advance for any help. (PL)ed76 Renaissance Capital

Bump - Were having the same issue.
Has anyone found a way to connect to Tibco with a user/pwd?
Version 14.0.297.

I purchased a one year subscription to Rolling Stone magazine . I got two issues and now it will not allow me to view the current issue, I have to pay again. Can someone help me, how do I get my purchase. I have the automatic download turned on.

I purchased a one year subscription to Rolling Stone magazine . I got two issues and now it will not allow me to view the current issue, I have to pay again. Can someone help me, how do I get my purchase ? I have the automatic download turned on.

Try contacting apple

AAP 131 Asset is blocked for acquistion, transaction not allowed

There is a service PO with Account assignment Category = Asset.
PO done and released.
SES done and released.
Now want to delete the SES. For that it has to be de - released by the HOD.
While de -releasing the SES it gives
ERROR" AAP 131 Asset is blocked for acquistion, transaction not allowed "
Checked Asset, it is already acquired and capitalized long back.
Need help.
Regards

Hi,
As message AK005 describes in the long-text, the AuC is assigned to an investment measure and therefore it is not allowed to post transactions that affect the acquisition value of the AuC.
So it is not allowed to post down payments, acquisitions, retirements, etc. directly to the AuC of an investment measure.
Only the CO/IM settlement transaction can be used for assets which are assigned to an investment measure.
Such kind of postings, and this is the only possibility, have to be posted to the investment measure directly, which means the posting has to be done to the WBS-element or the internal order.
Afterwards this down payment can be settled from the WBS-element or the internal order to the AuC.
regards
Waman

After trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

In most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.

TS3297 ITunes for IOS does not display any content in the iTunes store

iTunes for IOS does not display any content in any section (other than Genius tab).
NB: I am signed in with my Apple ID & have an Internet connection.
On selecting say the "Music" tab the display briefly say's "Loading ...", but nothing displays, just a white screen.
I have tried signing out of iTunes & re-setting the iPad, but this does not fix the problem.
(The App Store is working fine!)

Status is :540672
<REQUESTRESULT>
<RESULT>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</RESULT>
<FAILURE>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</FAILURE>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMVALUE</STATUS>
<VTEXT>VALUE?TE:20060830
END:VEVENT
END:VCALENDAR
</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
</REQUESTRESULT>

Purchased an IPAD mini 2 today. I am trying to transfer apps such as Angry Birds and not lose my progress. New IOS will not allow sharing of apps. Any ideas on how I can do this?

Purchased an IPAD mini 2 today. I am trying to transfer apps such as Angry Birds and not lose my progress. New IOS will not allow sharing of apps. Any ideas on how I can do this?

You can transfer the games but you will lose your game progress. now if you've played through game center you might keep something, but I'm not sure, I turn that off. But when I transferred my angry birds from my touch to my ipad i had to replay the levels over

Videos in keynote for ios do not play audio...

I have two quicktime videos that I want to play in a keynote presentation. The videos and their audio play perfectly out of my Photos folder on the iPad but when I insert them in a Keynote presentation, the video is great but the audio does not play. Help! I am using Keynote for ios. Would it help if I created the presentation on my mac and then sent it to the iPad?

FOUND THE SOLUTION:
I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

HT5527 IOS does not allow selection of downgrade to 5GB

Trying to downgrade from 40GB to the free 5GB is apparently not allowed for IOS. I check that option, the checkmark appears to the right, but when I tap "Done" nothing happens. I can apparently go to 20 GB for $20. 5GB is free for the Mac, why not for IOS. It is the same storage. Do I have to pay different for the two systems or pay double or whatever? I wish they never threw out the old iCloud system where I could put stuff there in files organized like the Mac and use them. The way now is really clunky and there is no ease of use.

You can't downgrade to the 5GB plan because your account is automatically scheduled to downgrade to the 5GB at the end of Sept. already. If that's what you want you don't need to do anything.

Two proposed solutions for iOS TOS not allowing runtime code

Similar Messages

Maybe you are looking for