Two step application install with reboot in between

I have run into a interesting situation.
1. Deploying upgrade of IBM I Access from v5 to v7. V5 was installed before SCCM was deployed.
Requirement
* I have to uninstall v5 (script done to do this), reboot, then install v71 all in one step.
* I have to publish this to the application catalog as a single step process.
The obvious way would be to use a Task sequence to accomplish this, however; we can't put Task Sequences in the application catalog.
Building a application just to "Uninstall" the previous version and reboot would not work either due to detection requirements and the reboot between.
How can I run these 3 steps as one application in the application catalog? Any ideas?
Thanks
Andrew

hmmm... V5 was installed before SCCM was deployed. I have not tried this, but could I build v5 now and just use the Supersedence portion so the uninstall of V5 would be used?
Would inventory detection tie the v5 application to each machine as detecting an installed app?
Thanks so much!
I "think" supersedence only works with apps that were installed from CM. Not sure though.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/
It doesn't matter was it installed through CM or not, it's all about detection methods. Here's what happens if supersedence is configured for the new app (v7)
Because v7 supersedes v5, it will first check is v5 found based on the detection method of v5 that you've configured
v5 is found and because v7 supersedes it and you've configured to uninstall v5 first, it will do it, after v5 is uninstalled, v7 will be installed
You'll have to carefully test this, you could configure v5 to make mandatory restart by ConfigMgr client from the settings, it should do it it then. Also, I'm not 100% sure how the supersedence works if the deployment is made as an available to users (refering
to Application Catalog you mentioned) instead of devices. If this was an available deployment to devices, ConfigMgr client would automatically uninstall v5 on the machines it's found and then install v7, no user action needed even though the deployment is
available, this is by design of the supersedence function.

Similar Messages

MDT 2013 Windows 8.1 application install with reboot problem

Hello!
I have a problem with an application install on Windows 8.1. I'm trying to install two applications and have activated "Reboot the computer after installting this application" for the first application. After rebooting the deployment window does
not show up agagin. BDD.log shows, that the deployment starts after the reboot but seems to hang, before the UI shows.
I tried to install this two applications under Windows 7, which works without any problems.
Here is the BDD.log for the failed deployment: http://pastebin.com/PbUH1LUq
Can anyone confirm this problem with MDT 2013 and Windows 8.1? Any ideas how to fix this?
Additional information: Further testing showed, that this problem just occurs, if the application install gets started separately after deploying the OS. If the applications are installed in one deployment together with the OS, everything works fine.

I did the same install on Windows 7, which worked without any problems. Here is the log file: http://pastebin.com/Qgn2PzyC
To make it clear:
If I run a Lite Touch Install task sequence to install Windows 8.1 and install the two applications within this LTI, everything works fine. The computer reboots after installing the first application and the deployment goes on and finishes successfully after
the reboot.
If I first install Windows 7 or Windows 8.1 via LTI and then (after LTI successfully finished) start a separate application install (using a custom task sequence with only one "Install Application" task in it), everything works fine with Windows
7 (installation continues and finishes after the reboot) but fails with Windows 8.1.
In Windows 8.1 the computer reboots after installing the first application, but after rebooting, the installation does not start again.
Keith, as you said, my environment is corrupted, I created an new fresh deployment share, just added the two test applications and the custom task sequence and tried again. Same result, Windows 7 works fine, Windows 8.1 fails by not starting the installation
after the reboot.

Material loss tracking in two step transfer posting with in plant

Dear Friends ,
Here the case is material will going loss when shifting one storage location to another , here i am using two step procedure . so how can i track rhe loss here . our client want to post loss value to production account only and also they want to know total loss in report . How it can be maintainable?.....which is right method for this .
RB

Hi,
You can scrap the material that underwent losses either at issiuing location (reverse GI for that much qty) or at the receiving location (do GR then scrapping).

How does two step verification work with an iPad?

Two step verification seems to require an iPhone for the code - can it be set up for an iPad?

Apple ID Two-Step verification FAQ
http://support.apple.com/kb/HT5570

Silently uninstall applications installed with Exceptions Deployment tool

How are we supposed to uninstall applications installed via the Exceptions Deployment tool?
At the time of writing this I can only see listed install as a supported workflow.
It would be a great help if we could have an uninstall workflow too.
Any suggestions on how to work round this also appreciated.

A little more detail on uninstalling AIR applications
http://help.adobe.com/en_US/air/redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html#WS 485a42d56cd19641-70d979a8124ef20a34b-7ffa

Applications installed with pacman only start with root

Hi,
I used linuxdcpp a few times some weeks ago, but now when I try to run it in terminal nothing happens and...
$ linuxdcpp
$
as if it closed directly after it starts.
$ linuxdcpp
$ echo $?
returns 0. Also, I can run it in root without any problem.
Since the time when it worked fine, I moved my home folder into another partition but I don't think it can cause the problem.
Last edited by Zikael (2014-03-05 22:10:08)

On my home folder, ownership & permissions don't seem to have actually changed :
$ ls -l
total 40
drwxr-xr-x 2 antoine users 4096 5 févr. 16:19 Bureau
drwxr-xr-x 3 antoine users 4096 10 mars 21:19 Documents
drwxr-xr-x 24 antoine users 4096 8 mars 21:32 Fichiers
drwxr-xr-x 4 antoine users 4096 6 mars 16:11 Images
drwxr-xr-x 2 antoine users 4096 4 févr. 09:48 Modèles
drwxr-xr-x 3 antoine users 4096 11 mars 13:21 Musique
drwxr-xr-x 3 antoine users 4096 2 mars 04:03 My Games
drwxr-xr-x 5 antoine users 4096 11 mars 12:44 Public
drwx------ 2 antoine users 4096 11 mars 12:41 Téléchargements
drwxr-xr-x 2 antoine users 4096 5 mars 10:51 Vidéos
$ cd ..
$ ls -l
total 24
drwx------ 44 antoine users 4096 11 mars 13:21 antoine
drwx------ 2 root root 16384 26 févr. 22:02 lost+found
drwx------ 16 test test 4096 9 mars 14:56 test
I don't really know how they're supposed to be but I don't see any big difference with the test user I created and with which it works.
If I want to copy my files to the folder of my new user, which command should I use and which dot files should I be specially careful with ?
EDIT : It seems that all the applications don't cause the same issue : I just installed rsync, it works perfectly fine. I think that only applications with a graphical interface are concerned.
Last edited by Zikael (2014-03-11 16:54:23)

Error when doing two step transfer between Plants with split valuation

Hi expert,
I´ve activated split valuation for Material X , it has three Valuation types ( NEW, REPAIR and DAMAGE ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
Use one-step procedure for transfer posting to mat. subj. to valuation
Message no. M7048
Diagnosis
In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
Procedure
Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

Hi,
What do you mean with "inconcistent to my storage type definition?", is that mean i can process two step transfer without using PO/delivery process or one-step movement? coz according to business requirement, we must use two step transfer considering to the distance between plants is so far and we want to make it the simple way so that PO/Delivery process isn't better solution. I think, this is an standard procedure all company over the world can use but just the reason of split valuation the system can't execute the transaction.
Is there any config i miss to? is there any user exit i can use for this requirement? please help me..
thanks,
AJ

Looking for application to sync the files between mac and pc

I have a mac and a pc, I would like to backup their file onto an external harddisk.
Will any application work for both PC and MAC?
or I will need two different application installed on my 2 computer?

Mac apps are Carbon Copy Cloner, SuperDuper!, Silverkeeper, etc. On the PC side is ghost. However, note that the formatting xchemes for each type are different and you just might find that you'll need two ext HDs.

Stock Transfer Order two step process

Hi!
we are following stock transfer order in two step process along with WM
we are using movement types 641 & 101.
Now our client rerquiement is : when goods issue is posting in supply plant ( movement type 641), the accounting entry should be Goods in Transit A/C dr TO Stock Account Cr.
when goods receipt is posting in receiving plant the accounting entry should be : Stock Account a/c dr to Goods in Transit A/C, if there are price differences it will be posted to price difference accounts ( both have price control "S").
how can we acheive this.
Now only at the time of 641 or 101 we posting the accounting document as: Stock A/C dr ( receiving plant) to Stock A/C Cr ( issuing plant) and price difference.
regs,
ramesh

we can a report in MB5T, but there you cannot find value of the stock, only quantity of stock, as in STO, there will not be any price, that is the problem.
regs,
ramesh

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

Steps to install SAP 4.7 EE with MS SQL 2000: URGENT

Hi all Basis Guru's
We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
Also is it neessary for me to install the SP3 for Ms SQL 2000.
Reward points for sure...
Plz do help me in this as, this task has to be completed by 03-08-07 EOD.
Million Thanks in Advance
Regards
Hari Haran.V

Hi Juan,
I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
but i get an error during the installation of the CI...(this is happening at the time of <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
Here is the detailed LOG of the error.....
INFO 2007-08-02 18:50:39
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-08-02 18:50:47
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Product Version ...
INFO 2007-08-02 18:51:13
Script "Product Version" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Patch ...
INFO 2007-08-02 18:51:13
Script "Product Patch" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Edition ...
INFO 2007-08-02 18:51:13
Script "Product Edition" successfully executed
INFO 2007-08-02 18:51:13
Executing check Collation ...
INFO 2007-08-02 18:51:13
Script "Collation" successfully executed
INFO 2007-08-02 18:51:13
Executing check SysAdmin Rights ...
INFO 2007-08-02 18:51:13
Script "SysAdmin Rights" successfully executed
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Database existance ...
INFO 2007-08-02 18:51:13
Script "Database existance" successfully executed
INFO[E] 2007-08-02 18:51:36
Account group="pdplmain\SAP_LDAP" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_DBA" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_OPER" does not exist. <#1>
INFO[E] 2007-08-02 18:51:49
Account group="pdplmain\dbpd0ctl" does not exist. <#1>
PHASE 2007-08-02 18:57:16
SAP Web Application Server
PHASE 2007-08-02 18:57:16
Request common parameters of SAP System
PHASE 2007-08-02 18:57:17
Collecting information on database configuration
PHASE 2007-08-02 18:57:17
Create operating system accounts
INFO 2007-08-02 18:57:17
Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
INFO 2007-08-02 18:57:17
Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
INFO 2007-08-02 18:57:18
Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
INFO 2007-08-02 18:57:18
Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
PHASE 2007-08-02 18:57:33
Preparing OS account for MCOD installation
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:36
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
PHASE 2007-08-02 18:57:38
Preparing DBMS-specific environment variables
WARNING 2007-08-02 18:57:38
Error 1332 (No mapping between account names and security IDs was done.
) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
INFO 2007-08-02 18:57:38
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:39
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:41
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:42
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:44
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:45
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:46
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:47
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:48
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:49
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:50
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:52
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:54
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:55
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2007-08-02 18:57:55
Adapt filesystem
PHASE 2007-08-02 18:57:55
Prepare check/adapt SAP instance filesystem
INFO 2007-08-02 18:57:55
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/prfclog exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2007-08-02 18:57:56
Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
INFO 2007-08-02 18:57:56
Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
INFO 2007-08-02 18:57:56
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:57
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
PHASE 2007-08-02 18:57:59
Extract archives
INFO 2007-08-02 18:58:00
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2007-08-02 18:58:01
Extract SAP System kernel archives
INFO 2007-08-02 18:58:01
Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
ERROR 2007-08-02 18:58:01
MOS-01021 PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
ERROR 2007-08-02 18:58:01
FJS-00012 Error when executing script.
Waiting to hear from at the earliest
Regards
Hari haran.v

Stock transfer between plants two steps 303-305

Dear All,
We are using version SAP 4.7 we are using stock transfer scenarion between plants two steps. 303-305 source plant they will remove the stock with 303 movement in the receiving plant they will receive the goods against the 303 document number.
at the time with 305 movement type one document generated in that document table MKPF 303 reference number should be updated but in the 305 document the reference document 303 not updated in table MKPF.
why?...any updations required. because i want to develop an user exit at the time of Goods receipt with 305 movement in the receiving plant now it is allowing posting date as <= 303 document posting date it should be allow only >=303 document posting date at the time of 305 document generation in the receiving plant.
in MKPF table the reference document is not updating ....any ideas....
im using the standard Enhancement :MBCF0002
EXIT_SAPMM07M_001.
Regards
Anand..

Hi..
then how can control.
receiving plant 305 document posting date is should be greater than or equal to source plant 303 document posting date how can achieve this?.
via user exit in the reciving plant 305 document the reference document not updated. how to achieve this?...
any ideas..
Regards
P.Anandhakumar

Stock Transfer between plants two steps.

DearAll,
We are using the scenario stock transfer between plants two steps.in the source plant we are issueing the goods with on 303 movement in MIGO with Remove from storage option. in the receiving plant we are receiving the goods with refernce to 303 material document in MIGO with place in storage option.
we are using the version SAP 4.7.
my problem is at the time of goods receipt SAP is allowing to the posting date less than the source plant 303 document date. it should allow the posting date as Greater than equal to source plant document date at the time of GR.
Any standard pracktise is there.
for example source plant 303 document date is 08.06.2009 wrongly i have entered the receiving plant 305 document posting date as 06.06.2009 it is allowing to post it is not throw any information. it should not allow to know.
i want to control this. any standard controls is there. kindly help.
Regards
P.Anandhakumar
Edited by: Anandhakumar Palanisamy on Jun 9, 2009 10:46 AM

Except user exit , Is it possible any standard functionality.?
why SAP not controlled this?.
this is SAP bug or not?. kindly clarify..
Regards
P.Anandhakumar....

Canu00B4t use two step transfer with split valuation ?

Hi people , i´ve activated split valuation for MaterialX , it has two Valuation types ( Production and Purchase ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
Use one-step procedure for transfer posting to mat. subj. to valuation
Message no. M7048
Diagnosis
In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
Procedure
Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, considering that having to create a transfer order for each movement will duplicate work and using a one step transfer won´t be practical. I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

First of all , thanks everyone for the help.
Csaba Szommer, Kunal ingale , i read the OSS note and the pdf and indeed everything confirms it´s not possible to do the two step movement. So , i tried the stock transport order and something else appeared here. When creating this type of order , the system first ask for a Supplying Plant , then you can populate the material , quantity and the destination plant. But then it asks for the Valuation Type of the material involved, and it seems this field is Mandatory . Is it possible to make this field on the transport order as optional ? I couldn´t find this field at SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level .
I need this field to be optional for the following reason. In my company there´s a relation between two plants , Plant A ( from where products are dispatched to the customer ) and Plant B ( where the material is produced with valuation type "Production" and sometimes is buyed from vendors with valuation type "Purchase" ) . The idea is to run an MRP which will generate the material needs on Plant A considering the Sales Orders. This need will be then transformed (automatically by MRP ) in Stock Transport Orders with Supplying Plant "Plant B" and receiving "Plant A". The problem here is that , at the moment of the transport order creation it´s no possible to know which will be the valuation type of the material that will satisfy the need. I mean , Plant B ( production and buying plant ) will check the list of needs for Plant A and then will decide which material ( with which Valuation Type ) they will provide considering the actual stock levels at the time of the MRP run.
In a few words, i see the only way to do a two step transfer of a split valuated material is using Stock Transport Orders , is there a way to make the field "Valuation Type" optional ?. The idea would be to choose the Valuation Type of the material at the moment of the Good Issue. Thanks a lot , once again.
Edited by: Christian Len on Jul 7, 2008 3:16 PM

Application control with two OSs

Sorry if this has been covered elsewhere - I could not find it.
How can I easily force OS X to only select from applications associated with the same OS or volume?
I have Leopard on one volume and Tiger on the other but it appears that if I use Get Info to set 'use this application to open all documents like this' it makes the change on both volumes.

It looks as though you know what you are talking about but I hope you will excuse my circumspection before I do this.
I had a look at the file and could not understand much except the help instructions which I decided to output with the -h option see result below.
Can you advise if there is likely to be any downside to the proposed action and what are domain local, domain system and domain user? Will this correct any problems for other users?
How is Leopard intended to work by default? It must be quite common to install a new OS and later Applications on a volume while retaining an older working OS and applications on another volume. Could I have upset a default by moving items? If I remember correctly Leopard was a clean install on a newly partitioned disk and Tiger was replaced with Carbon Copy Cloner. With this arrangement it is inevitable that I have moved, and will continue to move, data files between volumes and hence I would like to understand more about my options and if your fix is intended to correct the ongoing situation.
Help file:
G4:~ neville$ /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -h
lsregister: [OPTIONS] [ <path>... ]
[ -apps <domain>[,domain]... ]
[ -libs <domain>[,domain]... ]
[ -all <domain>[,domain]... ]
Paths are searched for applications to register with the Launch Service database.
Valid domains are "system", "local", "network" and "user". Domains can also
be specified using only the first letter.
-kill Reset the Launch Services database before doing anything else
-seed If database isn't seeded, scan default locations for applications and libraries to register
-lint Print information about plist errors while registering bundles
-convert Register apps found in older LS database files
-lazy n Sleep for n seconds before registering/scanning
-r Recursive directory scan, do not recurse into packages or invisible directories
-R Recursive directory scan, descending into packages and invisible directories
-f force-update registration even if mod date is unchanged
-u unregister instead of register
-v Display progress information
-dump Display full database contents after registration
-h Display this help
G4:~ neville$

Two step application install with reboot in between

Similar Messages

Maybe you are looking for