Two things: more shortcuts + configurable SQL formatter

Hi folks,
thanks for the great tool!
As you can read from the subject, I have to small recommendations for you:
First: make keyboard navigation possible through the use of shortcuts. Simple things such as switching from tab to tab, should be possible to do whithout the hands leaving the keyboard.
Second: The SQL Formatter (Ctrl+B) is a great tool, I miss from many other commercial editors!!! In order for it to be as useful as possible: please try to make it configurable. There is not THE one way of formatting PL/SQL the right way. You probably have some kind of pl/sql template. However, let the format be configurable. There are all kinds of different formatting habbits in developer teams. Let this wonderful please every one of them.
Thanks again for the good job.

Does anybody know, if my request of a configurable SQL formatter is planned for anytime?

Similar Messages

Having two or more personal configuration files on IDS

Hello,
I would like to know how to create two ini files under the docserv folder. the reason for this is to for dap.ini to run two different ini files. This set-up is done for ETPM and has a link of java for the batches of IDS.
Please help...

This is pretty simple. The dap.ini specifies the INI files to use for each configuration and the request to IDS has to specify attachment variable CONFIG= to switch between configurations.
Examples:
This is from dap.ini:
[ Config:100AIC ]
    INIFile         = .\mstrres\Amergen\A_100\AIC_100.ini
    INIFile         = .\mstrres\Amergen\AIC.INI
[ Config:200AIC ]
    INIFile         = .\mstrres\Amergen\A_200\AIC_200.ini
    INIFile         = .\mstrres\Amergen\AIC.INI
Multiple INI files can be specified for each configuration. The INI options from these configuration files are loaded first and then the dap.ini options are added. Works much like FSIUSER/FSISYS combination where config INI file(s) are treated like FSIUSER and dap.ini as FSISYS.

Two or More parameters in the SQL Source Window

Hi,
I have a Crystal Reports which uses an SQL Query as the source. I have a Report Date Range in the Crystal Reports but I want to improve the performance by embedding the parameter in the SQL Command. One parameter in the SQL Command is fine but more than that, I'm getting the following error:
Failed to retrieve data from the database.
Details: ORA-00911 : invalid character
Database Vendor Code: 911
Is there a configuration that I should do before adding two or more parameters?
Thanks.

Hi,
The expression is something like this:
... where CLOSED_DATE >= {?Start Date} and CLOSED_DATE <= {?End Date}
I also tried to use the BETWEEN IN function but got the same error. The CLOSED_DATE, Start Date, and End Date are Date Time.
Thanks.

Running two (or more) conky's

Is there a way to get multiple conky's up on my desktop? what I would like to accomplish is have my current conky (showing system resources and whatnot) in the upper right with the output of /var/messages/messages.log running in the upper left hand corner. my first guess is that I just need to make a second .conkyrc file, but can conky read 2 files? or do I have to have two instances of conky running?

O.K. tried that, but now it's flickering back and forth between the two conky's here are my two .conkyrc files:
# conky configuration
# edited by [email protected]
# set to yes if you want Conky to be forked in the background
background no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8
# Text alpha when using Xft
xftalpha 0.8
# Print everything to console?
# out_to_console no
# mail spool
#mail_spool $MAIL
# Update interval in seconds
update_interval 2.0
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 1000 5
# Draw shades?
draw_shades yes
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 8
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white
# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 875
gap_y 4
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(
# mldonkey_hostname Hostname for mldonkey stuff, defaults to localhost
# mldonkey_port Mldonkey port, 4001 default
# mldonkey_login Mldonkey login, default none
# mldonkey_password Mldonkey password, default none
# Possible variables to be used:
# Variable Arguments Description
# addr (interface) IP address for an interface
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# alignr (num) Right-justify text, with space of N
# alignc Align text to centre
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
# CPU usage graph, with optional colours in hex,
# minus the #.
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Download speed graph, colours defined in
# hex, minus the #.
# exec shell command Executes a shell command and displays
# the output in conky. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execbar shell command Same as exec, except if the first value
# return is a value between 0-100, it
# will use that number for a bar.
# The size for the bar is currently fixed,
# but that may change in the future.
# execgraph shell command Same as execbar, but graphs values
# execi interval, shell command
# Same as exec but with specific interval.
# Interval can't be less than
# update_interval in configuration.
# font font Specify a different font. Only applies
# to one line.
# fs_bar (height), (fs)Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or
# temp/tempf (first in C, second in F)
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# if_running (process) if PROCESS is running, display
# everything if_running and the matching $endif
# if_existing (file) if FILE exists, display everything between
# if_existing and the matching $endif
# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
# if_mounted and the matching $endif
# else Text to show if any of the above are not true
# kernel Kernel version
# linkstatus (interface) Get the link status for wireless connections
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# metar_ob_time
# metar_temp
# metar_tempf Temp in F
# metar_windchill
# metar_dew_point There are a bunch of these
# metar_rh and they are self-explanatory
# metar_windspeed
# metar_winddir
# metar_swinddir
# metar_cloud
# metar_u2d_time
# ml_upload_counter total session upload in mb
# ml_download_counter total session download in mb
# ml_nshared_files number of shared files
# ml_shared_counter total session shared in mb, buggy
# in some mldonkey versions
# ml_tcp_upload_rate tcp upload rate in kb/s
# ml_tcp_download_rate tcp download rate in kb/s
# ml_udp_upload_rate udp upload rate in kb/s
# ml_udp_download_rate udp download rate in kb/s
# ml_ndownloaded_files number of completed files
# ml_ndownloading_files number of downloading files
# mpd_artist Artist in current MPD song
# (must be enabled at compile)
# mpd_album Album in current MPD song
# mpd_bar (height) Bar of mpd's progress
# mpd_bitrate Bitrate of current song
# mpd_status Playing, stopped, et cetera.
# mpd_title Title of current MPD song
# mpd_vol MPD's volume
# mpd_elapsed Song's elapsed time
# mpd_length Song's length
# mpd_percent Percent of song's progress
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# conky displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# offset pixels Move text over by N pixels
# tail logfile, lines (interval)
# Displays last N lines of supplied text
# text file. If interval is not supplied,
# Conky assumes 2x Conky's interval.
# Max of 30 lines.
# Max of 30 lines can be displayed.
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before conky
# has started.
# top type, num This takes arguments in the form:
# top <name> <number>
# Basically, processes are ranked from
# highest to lowest in terms of cpu
# usage, which is what <num> represents.
# The types are: "name", "pid", "cpu", and
# "mem".
# There can be a max of 10 processes listed.
# top_mem type, num Same as top, except sorted by mem usage
# instead of cpu
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Upload speed graph, colours defined in
# hex, minus the #.
# uptime Uptime
# uptime_short Uptime in a shorter format
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
# stuff after 'TEXT' will be formatted on screen
TEXT
${offset 240}${color slate grey}${time %a, } ${color }${time %e %B %G}
${offset 240}${color slate grey}${time %Z, }${color }${time %H:%M:%S}
${offset 240}${color slate grey}UpTime: ${color }$uptime
${offset 240}${color slate grey}Kern:${color }$kernel
${offset 240}${color slate grey}CPU:${color } $cpu% ${acpitemp}C
${offset 240}${cpugraph 20,130 000000 ffffff}
${offset 240}${color slate grey}Load: ${color }$loadavg
${offset 240}${color slate grey}Processes: ${color }$processes
${offset 240}${color slate grey}Running: ${color }$running_processes
${offset 240}${color slate grey}Highest CPU:
${offset 240}${color #ddaa00} ${top name 1}${top_mem cpu 1}
${offset 240}${color lightgrey} ${top name 2}${top cpu 2}
${offset 240}${color lightgrey} ${top name 3}${top cpu 3}
${offset 240}${color lightgrey} ${top name 4}${top cpu 4}
${offset 240}${color slate grey}Highest MEM:
${offset 240}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${offset 240}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${offset 240}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${offset 240}${color lightgrey} ${top_mem name 4}${top_mem mem 4}
${offset 240}${color slate grey}MEM: ${color } $memperc% $mem/$memmax
${offset 240}${membar 3,100}
${offset 240}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
${offset 240}${swapbar 3,100}
${offset 240}${color slate grey}ROOT: ${color }${fs_free /}/${fs_size /}
${offset 240}${fs_bar 3,100 /}
${offset 240}${color slate grey}HOME: ${color }${fs_free /home}/${fs_size /home}
${offset 240}${fs_bar 3,100 /home}
${offset 240}${color slate grey}NET:
${offset 240}${color}Up: ${color }${upspeed wlan0} k/s
${offset 240}${upspeedgraph wlan0 20,130 000000 ffffff}
${offset 240}${color}Down: ${color }${downspeed wlan0}k/s${color}
${offset 240}${downspeedgraph eth0 20,130 000000 ffffff}
# conky configuration
# edited by [email protected]
# set to yes if you want Conky to be forked in the background
background no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8
# Text alpha when using Xft
xftalpha 0.8
# Print everything to console?
# out_to_console no
# mail spool
#mail_spool $MAIL
# Update interval in seconds
update_interval 2.0
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 1000 5
# Draw shades?
draw_shades yes
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 8
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white
# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 5
gap_y 500
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(
# mldonkey_hostname Hostname for mldonkey stuff, defaults to localhost
# mldonkey_port Mldonkey port, 4001 default
# mldonkey_login Mldonkey login, default none
# mldonkey_password Mldonkey password, default none
# Possible variables to be used:
# Variable Arguments Description
# addr (interface) IP address for an interface
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# alignr (num) Right-justify text, with space of N
# alignc Align text to centre
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
# CPU usage graph, with optional colours in hex,
# minus the #.
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Download speed graph, colours defined in
# hex, minus the #.
# exec shell command Executes a shell command and displays
# the output in conky. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execbar shell command Same as exec, except if the first value
# return is a value between 0-100, it
# will use that number for a bar.
# The size for the bar is currently fixed,
# but that may change in the future.
# execgraph shell command Same as execbar, but graphs values
# execi interval, shell command
# Same as exec but with specific interval.
# Interval can't be less than
# update_interval in configuration.
# font font Specify a different font. Only applies
# to one line.
# fs_bar (height), (fs)Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or
# temp/tempf (first in C, second in F)
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# if_running (process) if PROCESS is running, display
# everything if_running and the matching $endif
# if_existing (file) if FILE exists, display everything between
# if_existing and the matching $endif
# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
# if_mounted and the matching $endif
# else Text to show if any of the above are not true
# kernel Kernel version
# linkstatus (interface) Get the link status for wireless connections
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# metar_ob_time
# metar_temp
# metar_tempf Temp in F
# metar_windchill
# metar_dew_point There are a bunch of these
# metar_rh and they are self-explanatory
# metar_windspeed
# metar_winddir
# metar_swinddir
# metar_cloud
# metar_u2d_time
# ml_upload_counter total session upload in mb
# ml_download_counter total session download in mb
# ml_nshared_files number of shared files
# ml_shared_counter total session shared in mb, buggy
# in some mldonkey versions
# ml_tcp_upload_rate tcp upload rate in kb/s
# ml_tcp_download_rate tcp download rate in kb/s
# ml_udp_upload_rate udp upload rate in kb/s
# ml_udp_download_rate udp download rate in kb/s
# ml_ndownloaded_files number of completed files
# ml_ndownloading_files number of downloading files
# mpd_artist Artist in current MPD song
# (must be enabled at compile)
# mpd_album Album in current MPD song
# mpd_bar (height) Bar of mpd's progress
# mpd_bitrate Bitrate of current song
# mpd_status Playing, stopped, et cetera.
# mpd_title Title of current MPD song
# mpd_vol MPD's volume
# mpd_elapsed Song's elapsed time
# mpd_length Song's length
# mpd_percent Percent of song's progress
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# conky displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# offset pixels Move text over by N pixels
# tail logfile, lines (interval)
# Displays last N lines of supplied text
# text file. If interval is not supplied,
# Conky assumes 2x Conky's interval.
# Max of 30 lines.
# Max of 30 lines can be displayed.
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before conky
# has started.
# top type, num This takes arguments in the form:
# top <name> <number>
# Basically, processes are ranked from
# highest to lowest in terms of cpu
# usage, which is what <num> represents.
# The types are: "name", "pid", "cpu", and
# "mem".
# There can be a max of 10 processes listed.
# top_mem type, num Same as top, except sorted by mem usage
# instead of cpu
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Upload speed graph, colours defined in
# hex, minus the #.
# uptime Uptime
# uptime_short Uptime in a shorter format
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
# stuff after 'TEXT' will be formatted on screen
TEXT
${color slate grey}/var/log/messages:
${color}${exec tail -n20 /var/log/messages.log}
how can this be fixed?

Did you know how to link the text in two or more text boxes?

Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

How to show two or more PDF in one PDF-Reader / Concatenate PDF-Files

Hi,
I want to show two or more PDF files in one PDF reader window or to concatenate two or mor PDF files to one file.
We use WD4A and ADS.
Have someone an idea to solve this without an external program?
Thx in advance
Jürgen

We have done this successfully a few times using WDA - it wasn't easy - it took us 2 full weeks to figure it out, so i need to get full points for this one!
It's going to much easier to do this if you start a brand new WDA. If not, you'll have to re-do all your Context Node navigations within your methods.
The first thing you need to do is to define your Context properly:
You need a top level Node defined as 1:1 cardinality (as with all PDF development)
Next, you need another Container Node 1:n cardinality (this holds the collection of content nodes)
Finally, you have your PDF Content Node 1:n cardinality - This holds each instance of your PDF form
In our scenario, we are passed in a list of Project Numbers. We need to generate a PDF sheet for each project in the same PDF session.
pseudo code - i'm leaving out some of the unnessary details
Loop through the project number table.
ADD 1 TO v_cnt.
* navigate from <TOP> to <PDF_CONTAINER> via lead selection
    lo_nd_pdf_container = lo_nd_top->get_child_node( name = wd_this->wdctx_pdf_container ).
* This is the Important Part - we check to see if there is an element where index = v_cnt
* If not, we create one where we can store the new set of data
* get element via lead selection
    lo_el_pdf_container = lo_nd_pdf_container->get_element( index = v_cnt ).
    IF lo_el_pdf_container IS INITIAL.
      lo_el_pdf_container = lo_nd_pdf_container->create_element( ).
      lo_nd_pdf_container->bind_element( new_item = lo_el_pdf_container
                                           set_initial_elements = ' '   ).
    ENDIF.
    lo_nd_ideasheet_data = lo_el_pdf_container->get_child_node( 'IDEASHEET_DATA' ).
    lo_el_ideasheet_data = lo_nd_ideasheet_data->get_element( index = 1 ).
* fill all the data then bind the structure
Select * from XXX into lt_XXX
where project_number = lt_project-project_number.
* Move Data to appropriate fields/tables
* Bind the info back to the element
    lo_el_ideasheet_data->set_static_attributes( static_attributes =
                                              ls_ideasheet_data ).
Endloop.

How can I use TopLink for querys that have two and more tables?

I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.

You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API

FEBA - How to post two or more transactions at the same time?

Hi,
    one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
Thank you in advance,
Miguel

Hi,
I'm sorry for replying so late.
The solution I reached was to change the a few things in the standard.
Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
I hope you understand my English. I've problem with technical FI terms.
Here you are the code:
First I added a new contextual menu item:
CL_FEBAN_ALV_GRID=============CCIMP
call method e_object->add_function
    EXPORTING
        fcode = 'BS_POST_ITEMS'
        text = text-002.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    call method e_object->add_function
        EXPORTING
            fcode = 'ZBS_POST_ITEMS'
            text = text-Z02.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    call method e_object->add_function
        EXPORTING
            fcode = 'BS_KILL_ADVICE'
            text = text-004.
CL_FEBAN_ALV_GRID=============CCIMP
when 'BS_POST_ITEMS'.
    call method cl_feban_propagator=>raise_event
        EXPORTING
            i_event = 'POST_ITEMS'
            i_ref_to_item = l_ref_to_item.
*{ INSERT DHTK904078 2
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    when 'ZBS_POST_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'ZPOST_ITEMS'
                i_ref_to_item = l_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    when 'BS_LOCK_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'LOCK_ITEMS'
                i_ref_to_item = l_ref_to_item.
CL_FEBAN_PROPAGATOR===========CM001
    when 'POST_ITEMS'.
        raise event post_items
            exporting i_ref_to_item = i_ref_to_item.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    when 'ZPOST_ITEMS'.
        data: zvalor(1) value '' .
            export zvalor from 'X' to memory ID 'ZFEBA01'.
            raise event post_items
                exporting i_ref_to_item = i_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    when 'LOCK_ITEMS'.
        raise event lock_items
            exporting i_ref_to_item = i_ref_to_item.
Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
LNEW_FEBAF01
*     user parameter
        l_feban_position type c.
        field-symbols: <items> type item_tab_type.
*{ INSERT DHTK904077 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    data: zvalor(1) value '',
        zkwbtr type kwbtr,
        kwb type kwbtr.
    import zvalor to zvalor from memory ID 'ZFEBA01'.
    if ( zvalor is not initial ).
        if not i_ref_to_item is initial.
            assign i_ref_to_item->* to <items>.
            loop at <items> into h_item.
                select single kwbtr
                    into kwb
                    from febep
                    where kukey = h_item-kukey and
                        esnum = h_item-esnum.
                        zkwbtr = zkwbtr + kwb.
            endloop.
        endif.
        export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
    endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
    refresh g_picked_items.
    if not i_ref_to_item is initial.
        assign i_ref_to_item->* to <items>.
        loop at <items> into h_item.
            move-corresponding h_item to h_picked_items.
            append h_picked_items to g_picked_items.
        endloop.
    endif.
    submit rfebbu00 and return
        user sy-uname
        with anwnd = r_doc->*-anwnd
        with s_kukey in s_kukey
        with s_esnum in s_esnum
        with buber = g_posting_area
        with mregel = '1'
        with function = 'C'
        with mode = g_mode
        with p_bupro = g_bupro.
*{ INSERT DHTK904077 2
*--> Miguel Estu00E9vez - 17/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    if ( zkwbtr is not initial ).
        select single kwbtr
            into kwb
            from febep
            where kukey = h_kukey-low and
                esnum = h_esnum-low.
                zkwbtr = zkwbtr - kwb.
        export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
    endif.
*<-- Miguel Estu00E9vez - 17/06/2008
*} INSERT
    refresh s_kukey.
    refresh s_esnum.
    clear h_kukey.
    clear h_esnum.
endloop. "loop over all picked items
call function 'CUSTOMIZED_MESSAGE'
    EXPORTING
        i_arbgb = 'NEW_FEBA'
        i_dtype = '-'
        i_msgnr = '110'.
RFEBBU00
* original transaction currency provided and posting area = 2.
        ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
    ENDIF. "INSERT - mpEURO
    CONDENSE ftclear-selvon NO-GAPS.
*{ INSERT DHTK903977 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
    data: zkwbtr type kwbtr.
    import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
    if ( zkwbtr is not initial ).
        ftclear-selvon = zkwbtr.
        clear zkwbtr.
    endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
APPEND ftclear.
** Begin of comment C5053248
* perform druck_buzei_ftclear using ftclear-agkon.

How to avoid that two or more people alter the same Sales Order same time

I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
So if someone can give me a direction for a solution I would be very pleased.
Best regards,
Tim

Hi Tim,
The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
Kind Regards,
Owen

HT3819 can I use two or more Apple Tvs on one network?

I have two Apple TVs on my network, one in a basement cinema and the other in the ground floor TV room - if I use the one in the basement, then stop using it and then later in the day try and use the one in the TV room I get an error message asking me to turn on home sharing. I have to go upstairs to my MAC turn home sharing off and then on again for the second Apple TV to work. The same thing happens if I subsequently try and use the Apple TV down in the basement. I am not trying to use them both at the same time. Does anyone know if I can run two (or more) Apple TVs on the same network and if so how do I get around the home sharing error I keep getting? Thanks!

Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

MVC: Create a view which populates two (or more) joined tables in a single view table

I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
I have two tables:
1 - Bloggers: - bloggerID (int);
                    - bloggerName (string)
2 - Blogs: - blogID (int);
bloggerID (int);
                - blogTitle (string);
                - blogImage (string)
A blogger can have one or more blogs while one blog must be related to only one blogger.
I would like to have a view table on my webpage as the following:
Blogger Name
Blog Title
Blog Image
Noris Gang
Virus
virus.jpg
Noris Gang
Desktops
desktop.jpg
Gauthier
Books
books.png
John Leon
NNNMHJhjdhj
Nmbj.jpg
I'm using MVC 4 (or at least 3).
Thanks for your help.

Hello,
From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
Create view
as
Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
http://forums.asp.net/1146.aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make this two things at the same time ?

Hello
When my mouse is on a area, I need :
- to show a object (a rectangle inserted with the toolbar)
- to show a caption
I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
Someone have an Idea?
I can't use Javascript.
Thanks

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

WHERE clause creating a join for two or more tables

The CS3 Dreamweaver book says that the WHERE clause can
create a join for two or more tables. The join was created, but the
data is repeating. I have searched the web and this forum and have
not found the answer.
My Master page filters the recordset by Style No and when a
customer clicks on a particular style, it sends him to the Detail
page. All the records are showing from all tables on the detail
page from the Dynamic List, except they are showing multiple times
(ex. Size table has 4 sizes and Color table has 2 colors - my Size
Drop Down list is showing 8 options and my Color Drop Down List is
showing 8 options) I have a Master Page with a recordset pointing
to a Detail Page using the same recordset.
Master page works perfectly.
Master Recordset SQL:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, coloroption.color,
sizeoption.size
FROM products, coloroption, sizeoption
WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
products.styleno=coloroption.styleno
GROUP BY products.styleno
ORDER BY styleno ASC
The Detail Recordset:
SELECT products.itemID, products.category, products.styleno,
products.name, products.description, products.ourprice,
products.imageTH, products.image, sizeoption.size,
coloroption.color
FROM products, sizeoption, coloroption
WHERE itemID=colname AND products.styleno=sizeoption.styleno
AND products.styleno=coloroption.styleno
I tried using the GROUP BY on the detail page, but then it
only showed one size and color from the dynamic drop down list. I
tried changing the field name "styleno" in the other tables to be
unique, however, I was using the table identifer. I tried using the
JOIN command instead of the WHERE clause and that didn't help
either.
On the detail page, the customer is supposed to click on the
Size box and see sizes XSM - 6XL ONLY ONE TIME. and then be able to
click on the Color option and see White, Black, Red ONE TIME.
Is this possible?
Thank you for giving your time to read this.!
Evie

Do you have a link we can look at to see what you are trying
to do?
Dave
"EviePhillips" <[email protected]> wrote in
message
news:[email protected]...
> The CS3 Dreamweaver book says that the WHERE clause can
create a join for
two
> or more tables. The join was created, but the data is
repeating. I have
> searched the web and this forum and have not found the
answer.
>
> My Master page filters the recordset by Style No and
when a customer
clicks on
> a particular style, it sends him to the Detail page. All
the records are
> showing from all tables on the detail page from the
Dynamic List, except
they
> are showing multiple times (ex. Size table has 4 sizes
and Color table has
2
> colors - my Size Drop Down list is showing 8 options and
my Color Drop
Down
> List is showing 8 options) I have a Master Page with a
recordset pointing
to a
> Detail Page using the same recordset.
>
> Master page works perfectly.
> Master Recordset SQL:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> coloroption.color, sizeoption.size
> FROM products, coloroption, sizeoption
> WHERE category = 'chefcoats' AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
> GROUP BY products.styleno
> ORDER BY styleno ASC
>
> The Detail Recordset:
> SELECT products.itemID, products.category,
products.styleno,
products.name,
> products.description, products.ourprice,
products.imageTH, products.image,
> sizeoption.size, coloroption.color
> FROM products, sizeoption, coloroption
> WHERE itemID=colname AND
products.styleno=sizeoption.styleno AND
> products.styleno=coloroption.styleno
>
> I tried using the GROUP BY on the detail page, but then
it only showed
one
> size and color from the dynamic drop down list. I tried
changing the
field
> name "styleno" in the other tables to be unique,
however, I was using the
table
> identifer. I tried using the JOIN command instead of the
WHERE clause and
that
> didn't help either.
>
> On the detail page, the customer is supposed to click on
the Size box and
see
> sizes XSM - 6XL ONLY ONE TIME. and then be able to click
on the Color
option
> and see White, Black, Red ONE TIME.
>
> Is this possible?
>
> Thank you for giving your time to read this.!
> Evie
>
>

Two things: more shortcuts + configurable SQL formatter

Similar Messages

Maybe you are looking for