Two Virtual

Virtual Machines
I have been trying to publish a website for a few days with FTP. It�s just a simple html page but my laptop is running two virtual machines. So I uninstalled all of my Java application then reinstalled it; however, my problem still exists. Java Runtime Environment (JRE) is confusing me.
Windows XP and JAVA Problems
Microsoft virtual machine (VM) is no longer included as standard in the Microsoft Operating system. This means that the copy I hve of Windows XP is unable to view java based web content. therefore I have installed Service Pack so I will try to download VM from the Sun Microsystems website's.
Are there any suggestions as to how to download Runtime as a fix or maintenance?
bret
Edited by: bret.carpenter on Jan 14, 2008 9:32 AM
Edited by: bret.carpenter on Jan 14, 2008 10:00 AM

Hi Bret,
There are several guides provided on Java support site regarding this, hope the below guides will help you resolve your issues.
1) Un-installing Microsoft Virtual Machine
@ http://www.java.com/en/download/help/uninstall_msvm.xml
2) Switching between Microsoft VM and JRE
@ http://www.java.com/en/download/help/switchvm.xml
Perhaps you might prefer to do step 1 and remove all existing JRE that you have installed.
Restart your computers and then Install the latest JRE downloadable from Java site.
Warmest Regards!

Similar Messages

  • How to connect the two virtual machine .

    I installed VM workstation and created two virtual machine .Please suggest me how to connect them internally each other though vm network editor.I want create RAC Setup for practice.

    NAT is the default adapter type in VirtualBox, which will work in almost any configuration and networking environment. Using the NAT adapter, the host system will establish connections on behalf of the guest OS. NAT requires that the corresponding VM guest adapter uses DHCP and cannot be used to provide any services unless you configure port forwarding (>1024) at the VirtualBox VM NAT adapter.
    Bridged networking is the most transparent adapter type, but requires a physical network adapter on the host OS, which is limited depending on the host system and hardware, e.g. wireless. It also requires that the user understands network and routing restrictions of the host system in case of using the interface to communicate between the host and VM. A combination of host-only and NAT may sometimes be necessary to allow the VM to connect to the internet and allow the host to communicate with the VM guest OS.
    Btw, the host-only adapter IP actually works on behalf of the host OS and can be used to allow the VM to access the host system. So if Internet is not required, the NAT or bridged adapter are not required. I'm not sure if many people realize that, since it's not really mentioned in the documentation. So if you use the host-only adapter, simply use the host-only IP instead of the host system real IP to connect the VM to the host OS.
    I also switched to VirtualBox a couple of years ago, mainly because it provides more VM hardware options, is free and because of the ability to manage multiple virtual machines and group them together. I have about 70 virtual machines for testing and evaluating configured on my home computer. I also like the option in VirtualBox to clone a VM based on a Snapshot.
    VMware provides a Virtual Network Editor in VMware Workstation (KB 1018697), which allows to customize any of the existing virtual network adapter or add new ones. The available technologies under any Type 2 hypervisor are very similar between different products:
    http://www.vmware.com/support/ws45/doc/network_configure_ws.html

  • ChaRM: Two Virtual Systems?

    Hi Experts,
    It is possible to have two virtual systems in a ChaRM three tier landscape? DEV -> Virtual System 1 -> Virtual System 2?
    This is because only DEV is available now with QAS and PRD following in the future. Thanks!
    Best Regards,
    Karl

    Dear Karl, Please use following documentation to configure CHaRM incase you have only one system present at this moment, Later you can alter the configuration once QAS and PRD are installed.
    How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part1)
    How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part2)
    Hope it helps.
    Regards, Amber S | CTS

  • One Server, Two Virtual Hosts, Two Applications, Two Mix,...

    In the same server I have two virtual hosts (site1.com, site2.com). For each virtual host I have a PUBLIC page (40, 50).
    The following accesses work perfectly:
    (1) http://www.site1.com/portal/page?_pageid=40,1&_dad=portal&_schema=PORTAL
    (2) http://www.site2.com/portal/page?_pageid=50,1&_dad=portal&_schema=PORTAL
    ... But the following ones also
    (1) http://www.site1.com/portal/page?_pageid=50,1&_dad=portal&_schema=PORTAL
    (2) http://www.site2.com/portal/page?_pageid=40,1&_dad=portal&_schema=PORTAL
    Imagine that site1 is 'Coca Cola' and site2 'Pepsi' (page 40 is 'Coca Cola' and 50 'Pepsi'!)
    How to avoid it?
    I think about two ways of solving it:
    1. To hide the url and to avoid the manipulation of the number of page. (Died the dog ended the anger)
    2. To do that the page 40 works only with the virtual host site1 and the page 50 with the virtual host site2.
    The question is:
    How to do someone of these options?
    Thanks for the help

    Hi Sachin,
    you're right with two different VM you can manage that, but this is similar to have two different server.  My goal is to use only a server (phisical or virtual)...  I think  with 8.8 version we can do it, but I glad if someone has some experience of this scenario..
    Regards,
    Giovanni

  • Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button. why?

    Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?

    Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.

  • Simultaneous access from two virtual mashines on one framegrabber

    Hello,
    is it possiblie to get access from two virtual mashines on one framegrabber. I want only get the information from Cam-A  and transfer it to virtual mashine A. For Cam B and virtual mashine B is it similar.
    My problem is that I have to measurements but they have to run at they same time and I want to use the Vision Builder AI for this. If it's right that that  the Vision Builder is able to do only one measurement at the same time.
    Another solution could be, to export the vbai to .vi's and import it to LabVIEW, coundn't be?
    best regards
    phil
     

    As far as I know, virtual machines cannot access plugin frame grabbers. Are you using GigE cameras (which should work in VMs since they can use GigE ports of PC), or CameraLink cameras (which shouldn't work in VMs since they require plugin frame grabbers)? As far as processing images from two different cameras at the same time in VBAI, You can process images that were acquired at the same time in VBAI, but the processing steps don't execute simultaneously. Do you just need the acquisition to be in parallel or the processing as well. Why does the processing need to happen in parallel (is it for timing/perfromance)? If the inspection is running on windows, you can have two instances of VBAI running at the same time and each instance can process a different camera, but it may be more challenging to coordinate the results of the two different inspections if they need to be combined at some point. If you are acquiring on Windows, you could also use the API in LabVIEW to control the two inspections that are happening in parallel and coordinate the results. See the example of how to use the API here:
    \<NI Install directory>\Vision Builder AI 2014\API Examples\LabVIEW Examples
    Hope that helps,
    Brad

  • Need to cluster two virtual webs and few services

    Environment
    OS = Windows 2003 R2
    I was to HA an application which has two virtual webs hosted at IIS
    and also around 8 windows services on which the
    application is running. Please advice
    Any comment will be appreciated. Thanks. Zahid Haseeb.

    Still not clear.
    You want to configure HA for your web application to avoid down time? If yes then go for Windows Network Load Balancing its integrated with windows OS.
    You have to configure identical website in two or multiple servers. In other words mirrors.
    http://support.simpledns.com/KB/a182/the-system-failed-to-register-host-resource-records.aspx
    http://support.microsoft.com/kb/323437/en-us
    But if there is any problem related to websites (lets say, some issue with web site due to code change in one server then still user will keep landing to faulty server.).
    If you are sure than you can develop identical update in all member servers then go for NLB.
    Regards Suman B. Singh

  • Simulating two virtual monitors on one physical monitor

    Is there a application or system extension to allow simulating two virtual monitors on one physical graphic card output?
    The origin of the problem comes from the wish to drive two external displays from a macbook pro. (without USB driver!!)
    The only solution is to use Matrox Interfaces that tell the system that one big screen is pluged to the grafic card. So the Graphic card puts out a signal for a big widescreen dispaly. The Matrox splitt it up the two physical monitors.
    The problem is that dual screen applications like Aperture or apples color don`t work with floating windows and no window snapping works good etc.
    So a system extension or thired party application must split the one big display coming from the matrox in two virtual displays that are like the original two.
    It is a shame that apple don`t provide this functionality (two external monitors) on their high end laptops. They may loose their attention on the pro user and keep on focus on the dummy Iuser. Unfortunately this means a reduction of quality in their high end products.
    Thanks for answering that wired question!

    The only thing akin to what you want in OS X is Spaces (System Preferences) which can be used to set up virtual screens. I don't know if it's what you are looking for. I'm not aware of any such third-party utility although you can search for one at VersionTracker or MacUpdate.
    I suppose there may also be a commercial product around, but I don't know of one. Matrox makes a hardware add-on for having multiple monitors on a laptop, but I don't know if they have a utility such as you have described. You may find something doing a Google search.

  • Installing 2 ssl certificate on one machine with two virtual hosts

    Hi,
    If you have a managed server in a cluster that has two virtual hosts running
    on it how can you intsall the ssl certificates for both virtual hosts, in
    the admin console.
    any help would be great!

    OK....I figured it out.
    I was able to set the IPV4 properties on the ones needing filtering to use the IP or OpenDNS as the primary DNS and my server address as the secondary and that works.
    I removed OpenDNS forwarder from the server, flushed dns on all machines and so far it's working perfectly.  The machines that are not going to be filtered just go through the server for DNS.
    Hopefully, after a while it doesn't break down!

  • Two virtual disks with same name - how to safely delete one of them

    I mistakenly created a disk in a repository that uses the same friendly name as an existing disk that is in use by a virtual machine.
    Can I safely remove the second disk with out OVM trying to delete the original disk as well?
    Thanks

    Yes, you will be safe, bacause OVM uses the disk ID to identify the disk.
    You can also use the little triangle just to the left of the virtual disk name. It will open a message saying if disk is in use by a Virtual machine.
    Also, the GUI will not let you delete a disk which is in use.
    If you want another way, you can "edit" the disk in the OVMM GUI, read its ID, cancel the edit, and go delete it from a root command shell on the VM server.
    br.

  • Split 4k monitor into two "virtual monitors"?

    Hi all,
    I'm thinking of buying a 4k monitor to replace a dual-screen setup. However, I like the functionality of having two things maximised at once. Is there any way to set up X so that it sees the 4k 3840x2160 monitor as two separate 1920x2160 monitors? That way, maximising an application would only take up half of the physical screen and the taskbar would only appear on one half.
    Thanks!
    Last edited by Tom B (2014-06-04 12:15:13)

    You might want to look into fakexrandr or try a tiling window manager.

  • Save session between two virtual directories in Reverse Proxy

    All,
    I'm having an issue and I'm hoping someone here can help me. I currently have an reverse proxy rule for say
    /abc pointing to 10.10.10.10
    We had to add to another virtual directory
    /xyz pointing to 10.10.10.20
    This is because of the limitation of the application where different parts are to be installed on different servers. What we are trying to achieve is to see if there is a way we can keep a session alive while the user is switching from /abc to /xyz.
    We are using SJWS 7.0. Any help will be greatly appreciated.

    I have one Web Server 7.0 instance with the following obj.conf :
    <Object name="default">
    <If $uri =~ "/xyz">
    NameTrans fn="map" from="/" name="reverse-proxy-/xyz" to="/"
    </If>
    <ElseIf $uri =~ "/abc">
    NameTrans fn="map" from="/" name="reverse-proxy-/abc" to="/"
    </ElseIf>
    </Object>
    <Object ppath="*">
    Service fn="proxy-retrieve" method="*"
    </Object>
    <Object name="reverse-proxy-/abc">
    Route fn="set-origin-server" server="http://server1.sun.com:80"
    </Object>
    <Object name="reverse-proxy-/xyz">
    Route fn="set-origin-server" server="http://server2.sun.com:80"
    </Object> ...When I send a request to URI :
    /abc/test1.html : the request gets served from server1 from docs/abc/test1.html.
    /xyz/test2.html : the request gets served from server2 from docs/xyz/test2.html
    Where as when you change obj.conf to (note the change in from parameter in map SAF)
    <Object name="default">
    <If $uri =~ "/xyz">
    NameTrans fn="map" from="/xyz" name="reverse-proxy-/xyz" to="/"
    </If>
    <ElseIf $uri =~ "/abc">
    NameTrans fn="map" from="/abc" name="reverse-proxy-/abc" to="/"
    </ElseIf>
    </Object>
    <Object ppath="*">
    Service fn="proxy-retrieve" method="*"
    </Object>
    <Object name="reverse-proxy-/abc">
    Route fn="set-origin-server" server="http://server1:80"
    </Object>
    <Object name="reverse-proxy-/xyz">
    Route fn="set-origin-server" server="http://server2:80"
    </Object> ...When I send a request to URI :
    /abc/test1.html : the request gets served from server1 from docs/test1.html.
    /xyz/test2.html : the request gets served from server2 from docs/test2.html.
    first test with a simple html file to see if the request is going to appropriate servers.
    What do u mean by : "What we are trying to achieve is to see if there is a way we can keep a session alive while the user is switching from /abc to /xyz."

  • Is it possible to do an identical Photoshop brush-type edit on a two virtual Lightroom copies?

    I cant see how it's possible but I thought I'd ask.  I took a promo portrait of a book author that needs to be in color and b&w depending on where it will be used (b&w on the book sleave, color on a flyer, etc).    I have a vitual copy for the b&w image which has different contrast settings, otherwise they are identical.   Normally I only have one photo to deal with if I need to use Photoshop, and it's aways my last step.  This is a little different in that if I dont want to adust the contrast on the edit, I will have to eyeball the same brush strokes both copies, which will never exactly match.  Is there any way to do an identical  Photoshop "Liquify" edit on both?
    Thanks.

    Suggestion: when you want to do this, avoid cropping / straightening / changing aspect ratio before you edit in PS. The crop LR uses, is destructive (unless you are using Smart Object).
    By leaving that step until afterward, back in LR, the various VCs you may make will all have the entire picture area to work from. A given nondestructive crop can still be Synced or copy-pasted between versions.
    In this kind of workflow, PS is being used purely for its effect on the picture content. The presentational aspects are all kept back for LR to do, which keeps most of the same fluidity that you get when working straight from a camera original in LR.

  • Connecting two virtual hosts

    I am trying to configure portal to work with machines in the internal network and outside world. Is there a way to do it?
    Dolf-Jan

    For the courtesy of others, please try not to cross-post the same question to multiple forums.
    Your answer can be found on the 9i AS Portal Forum at the link below:
    http://technet.oracle.com:89/ubb/Forum70/HTML/000040.html

  • Regarding Virtual InfoCube with Services

    Hi All,
    I have a general doubt regarding two Standard InfoCubes
    We have two InfoCubes FIGL_C01, FIGL_C01, based on which we have two Virtual InfoCubes with services. FIGL_VC1, FIGL_VC2.
    What is the necessity for maintaining these InfoProviders as we are already having the base InfoCubes on which we can derive the queries.
    What is the basic use of Virutal InfoCube with Services.
    Regards.

    Hi,
    SAP help says:
    <i>At query runtime, the service of the virtual InfoCubes uses the data from the basic InfoCubes to determine the balance-dependent location of the financial statement items (contra items), in the financial statement version and presents the result in the query. From the technical point of view, the service determines the item indicator in the key for the financial statement items depending on the balance in the respective node in the financial statement structure.</i>
    To know further infomation about why we need to find the Item indicator in finance statement refer:
    http://help.sap.com/saphelp_nw04/helpdata/en/04/7b95fb42b0f94aba334c0890dbbda4/frameset.htm
    Note 673564 describes exactly why the virtual Infocubes 0FIGL_VC1 and 0FIGL_VC2 were developed. (because BW cannot handle the FI fin. statement hierarchies)
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for