Type Library Registered - but error still present.

I am trying to automate this equipment = "Goniomertic
Radiometer LD8900R".
The installer included a LabVIEW library that references a new Type Library.
So, I manually registered my type library (Gonio32.tlb). It was successful.
However, I am still having the same error "Error -2147221164 occurred at Class not registered ..."
What am I missing?
Ref:
How Do I Manually Register Type Libraries, ActiveX Controls, and ActiveX Servers?

----------Attempt #1 -------------------------------------------------------------------------------------------------------
Command String Entered: "C:\I386\regsvr32.exe" "C:\Program Files\Photon\GonioR\Gio32.dll"
ERROR MESSAGE:
....\Gio32.dll was loaded, but the DllRegisterServer entry point was not Found.
THis file cannot be registered.cannot be registered
----------Attempt #2 -----------------------------------------------------------------------------------------------------
Command String Entered: "C:\I386\regsvr32.exe" /i /n "C:\Program Files\Photon\GonioR\Gio32.dll"
ERROR MESSAGE:
....\Gio32.dll was loaded, but the DllInstall entry point was not Found.
THis file cannot be registered.cannot be registered.
Attachments:
GONIO_Install.jpg ‏64 KB
Gonio.zip ‏119 KB

Similar Messages

I deleted some podcasts when I synced with itunes on my computer. They no longer show up on the itunes sync when connected, but are still present on my ipod. How do I delete them from my ipod?

I deleted some podcasts when I synced with itunes on my computer. They no longer show up on the itunes sync when connected, but are still present on my ipod. How do I delete them from my ipod?

Try swiping your finger across the podcast then tap Delete.

PLEASE HELP! Itunes library gone but music still on iPod

I recently have started organising my 'my music' files and deleting folders with more than 3 copies of songs, I have a lot of music 2500 songs and opened up itunes and all music I have imported (not bought) has gone, my music is still on my ipod though but I'm too scared to sync it in case all my music has gone, I still have my original music in 'my music' file but it's not shown up on library as usual PLEASE HELP!

See Recover your iTunes library from your iPod or iOS device.
tt2

Can See Songs in Library & Playlist, but error Message of "file not found"!

Though I can actually find the songs in my "My Documents" and individual user files, I can no longer play directly from i-Tunes like before. I installed 7.0 and also was using a sync program (Winamp)and I may have really screwed things up! Any suggestions?

It sounds like you do know the location of the
folder. What you need to do is point iTunes back to
that location, iTunes>edit>preferences>general tab,
the first box on the general tab is the music folder
location, so you can "tell" iTunes where it is at
that point.
So I have looked into this. However, iTunes already has the correct folder location. But, I've still got the dreaded exclamation point next to 2,000 of my songs. On some of the songs they are divided into subfolders by artist name, done before I started using iTunes; but this was never a problem before. The only thing that I can think of to do at this point is to add the folder to my iTunes library again, and go through and remove all duplicate songs, which would be a tremendous pita. Anyone have any ideas? please?
G3 iBook and a windows rig Mac OS X (10.4.9) windows rig running xp sp2

A user has the authorizations in his UMR, but error still appearing

Hi all,
I have an issue with several issue in a company i am working for. The issue is the following:
When a user wants to do something SAP gives an authorization error for an authorization that the user has in his UMR. When i remove any other role, the user can execute the transaction.
I have seen the RZ10 looking for auth/auth_number_in_userbuffer but it does not exist!!!! what can i do????????
Thanks In advance!!!

Hi,
Firstly, auth/auth_number_in_userbuffer is obsolete. Check for parameter auth/new_buffering. The value should be set to 4. Also, ensure that the PFCG_TIME_DEPENDENCY job is scheduled and running every day.
Refer to SAP note 209899 for more information on the new parameter.
Regards,
Raghu

Battery was replaced but error still appears in the HP health check

The HP health check shows the HP Notebook PC Battery Pack needs to be replaced. I have a HP Pavilion Entertainment and I did replace the battery but the message still appears. Any suggestions as to how to stop the message from appearing?

full charge, then let the battery FULLY depleat, this will teach the computerto read the battery properly,

Lost files after Mavericks upgrade but files still present in System Info app.

I upgraded to Mavericks but after the install I did not have any of my files. I tried to login under the original user but there is no other User to login. Although, my files are not lost. They are hidden or something like that because when I try to recover files; from my time machine backup I did prior to the upgrade, it says I only have 12gb available out of 160gb. It shows in System Information that the files are still there and I was able to navigate to select my iTunes and iPhoto libraries.
How can I get ALL my files and applications back to being recognized like it was before I upgraded?

If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.

Imessages not sending/ receiving. All texts made to other iphone users produce an error message where it shows as it was unable to deliver, however, the messages go through, but error still comes up after each imessage sent. this does this for each text

I have the Iphone 5S. Over the last few days, I continually get mail delivery errors when imessages are sent to any contacts who have iphones. I have spoken to my friends/ family who are also on the receiving/ sending end of my messages. They also say that they are receiving an error/ mail delivery error when they send imessages to my phone. Text messages are working fine (with other phones that are not iphones) and no delivery errors come up. However, it is just with me sending or receiving imessages. I have gone in to settings> messages> send & receive and all my information is right. I have also attempted to cut the phone off and back on (hard reset as well) and this has not fixed the problem. I then explored to see if my software was out of date, however, i have the most up to date software for the iphone 5 S. Does anyone know of a way to fix this problem, as it is annoying to both me and anyone else who has an iphone that sends me a text/ imessage as it will *alert* that there was a delivery failure.
Please help!!

There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems. It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

Automation Error - Can't register type library

I am running Windows 7, 32-bit.
I tried to add a reference from Visual Studio but Photoshop was not visible. So I decided to try to register the type library manually.
I am trying to automate photoshop but I cannot get the type library registered.
There error I am getting is:
The module typelibrary.tlb may not be compatile with the version of windows tha tyou are running. check if the module is copaitble with an x86 (32 bit) or x64 (64-bit) version of regsvr32.exe
Any ideas?

You may be better asking in the SDK forum..
http://forums.adobe.com/community/photoshop/photoshop_sdk
I don't use Visual Studio, mainly JavaScript, but managed to get this to talk to Photoshop to change the brush hardness...
using System;
using System.Windows.Forms;
using System.Runtime.InteropServices;
namespace SendKeysTest
public class Driver
[DllImport("user32.dll")]
public static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
[DllImport("User32")]
public static extern int SetForegroundWindow(IntPtr hwnd);
public static void Main(string[] args) {
IntPtr iHandle = FindWindow("Photoshop",null);
SetForegroundWindow(iHandle);
SendKeys.SendWait("+]");
EDIT: This site might give you the information required:-
http://www.pcpix.com/Photoshop/#com

How can I use a COM object that does not have a type library?

Hello,
I've created a com server in python for which I do not have a type library. I am able to call functions for this application in Python, TCL, I'm sure VB, etc. without the type library.
Must I have a type library registered to use this COM object with Labview? I was hoping I could simply supply the name to the refnum (or the GUID) then call functions by passings strings to the invoke node. This does not seem to be possible - am I missing something?
In the event that I cannot use a com server without a type library. Any recommendataions on how to create one? I'm wondering if I can use the same GUID and create a shell in LabWindows which generates the IDL/TBD file I need for Labview to see my
com server.
Any help is greatly appreciated.
73,
Timothy

Timothy Toroni wrote:
> Thanks for the info, however their example is labview server and
> python client. I'm going the other way. It's good to know about
> LabPython though...
>
> As of now, it seems to be there is no way to use a COM object without
> a type library from inside LabView.
Yes that is true. LabVIEW needs that to configure the Property and
Methode Nodes correctly. Otherwise it would need to have a special
Property and Method Node with a configuration dialog similar to the Call
Library Node, but a LOT more complicated. Not sure many people could
make use of that, and it would be a very tiring experience trying to get
things setup in that way, by going through the edit, test, and crash
cycle over and over again.
Rolf Kalberm
atter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Itunes error 3194 i delet host file but error sitll not go

i have error 3194 problem .itry many time but error still not go.i delet my host file but error still.i use widose .please help me please

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

Can't delete file after renaming due to Word file handle still present. Error staes document is still in use but it's really not. Worked fine in 2007 but not in 2010.

I have some code associated with a Word Template. The template is opened, filled out and saved via a routing in vba. This all works fine in older 2007 version (which is version it was originally created in). Once this file is saved, the user can change the
date in a text box and re-save document. The code saves using the new date for part of new file name and then deletes that older file from the server. It fails at the delete function because the newer version of word is not dropping the file handle from the
first named file when user saves it to the new filename. In older version (2007) this handle was released as soon as file was saved to a different name. I can't seem to figure out how to release the old document filename so the old document file can be deleted.
I hope I explained this well enough.
Here's the code that woeked in version 2007 but fails in version 2010.
Option Explicit
Dim CAPEX01 As MSForms.ComboBox
Dim CAPEX02 As MSForms.ComboBox
Dim LocalPath As String
Dim NetPath As String
Dim OldPath As String
Dim OldPathNet As String
Dim DocName01 As String
Dim DocName02 As String
Dim DocName03 As String
Dim DocName04 As String
Dim DocName As String
Dim DocNameold As String
Dim TestDocName As String
Dim filesys
Dim newfolder
Sub AutoOpen()
ActiveDocument.ActiveWindow.View.Type = wdPrintView
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
End Sub
Sub AutoNew()
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
ComboBox1.Locked = False
ComboBox1.Enabled = True
FillList1
FillList2
End Sub
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
    If Not TestDocName = DocName01 Then
        Set filesys = CreateObject("Scripting.FileSystemObject")
    If filesys.FileExists(DocNameold) Then
        filesys.DeleteFile (DocNameold), True
'I get file permission error here
    End If
    End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
    MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
'''''''Document path functions''''''
Sub chkpath()
Set filesys = CreateObject("Scripting.FileSystemObject")
If Not filesys.FolderExists("\\yourPath\") Then
   newfolder = filesys.CreateFolder("\\yourPath\")
End If
If Not filesys.FolderExists("\\yourPath\" & DocName01 & "\") Then
    newfolder = filesys.CreateFolder("\\yourPath\" & DocName01 & "\")
End If
End Sub
''''''Save Function''''''
Private Sub CommandButton1_Click()
DocName01 = ActiveDocument.TextBox2
DocName02 = ActiveDocument.TextBox4
DocName03 = ActiveDocument.TextBox1
DocName04 = ActiveDocument.ComboBox1.Value
chkpath
NetPath = "\\yourPath\" & DocName01 & "\"
DocName = NetPath & DocName01 & "-" & DocName02 & "-" & DocName03 & "-" & DocName04
ActiveDocument.SaveAs2 FileName:=DocName, FileFormat:=wdFormatDocument
ComboBox1.Locked = True
ComboBox1.Enabled = False
ComboBox2.Locked = True
ComboBox2.Enabled = False
TextBox1.Locked = True
TextBox1.Enabled = False
TextBox3.Locked = True
TextBox3.Enabled = False
TextBox4.Locked = True
TextBox4.Enabled = False
DeleteOldDoc
End Sub
Sub FillList1()
Set CAPEX02 = ActiveDocument.ComboBox2
With CAPEX02
      .AddItem "CASTING", 0
      .AddItem "HOT ROLLING", 1
      .AddItem "COLD ROLLING", 2
      .AddItem "FINISHING", 3
      .AddItem "PLANT GENERAL", 4
      .AddItem "MOBILE EQUIPMENT", 5
End With
End Sub
Sub FillList2()
Set CAPEX01 = ActiveDocument.ComboBox1
With CAPEX01
      .AddItem "A Name", 0
      .AddItem "Another Name", 1
End With
End Sub
Private Sub CommandButton2_Click()
    UserForm1.Show
End Sub

mogulman52 and Don,
I went back and looked at my code and had already updated it to SaveAs in the new docx format. It still holds the lock handle in place until Word closes, unlike earlier versions which released the lock handle when you did a SaveAs.
As a note, all my Word and Excel macro-enabled (dotm & xltm) templates are read only and are never filled in, prompting the user for a file name on any close event or if they run the code gets auto-named. I do the SaveAs and concatenate the file name
from data on the document (or sheet) that has been filled in. During the SaveAs the docx gets saved to a network folder and also on a local folder. The lock gets renamed to the filename and remains until Word is closed.
So my code still fails at the point noted below while trying to delete an old filename version after the file has been saved as a new filename in a new folder. So....
The code is looking in the last folder where the docx file was saved for the older filename so it can be deleted. The newest docx version has already been saved in a different folder and has a new lock handle of its own. That lock is not my problem, it's
the older file lock which really exists in the same folder as the first filename that the docx was saved to. It does not release that lock until I exit Word. My work around has been to instruct all users to manually delete the older version file.
The other odd thing is this only happens when I run it from code, if you manually go through these steps with the SaveAs menu drop-downs in Word it will release the lock handle???
Hope this isn't to confusing and thanks for all your suggestions and help.
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
If Not TestDocName = DocName01 Then
Set filesys = CreateObject("Scripting.FileSystemObject")
If filesys.FileExists(DocNameold) Then
filesys.DeleteFile (DocNameold), True 'I get file permission error here- lock handle is still present from last SaveAs command in last folder where previous version of file was saved.
End If
End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
Glenn

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandi

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader. The upgrades indicate they were successful but I still get an error message when I try to open I-Photo telling me I need to prepare the library

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader. The upgrades indicate they were successful but I still get an error message when I try to open I-Photo telling me I need to prepare the library

I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader.
But have you run the the iPhoto Library upgrader? It is installed in Applications > Utilities. Launch it and direct it to your iPhoto library.
Which version of iPhoto did you upgrade from?
The upgrader is only necessary, if you have been running iPhoto7.1.2 or earlier.

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

Try posting in the iTunes forum. You have an iTunes problem not an iPod problem

Type Library Registered - but error still present.

Similar Messages

Maybe you are looking for