Type showing up as outlines

On my dashboard applications and on the headlines on Safari and Firefox, the type is showing up as white outlines. Why is this? Can I fix it?

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

Similar Messages

  • Type Show Hidden Characters doesn't display hidden chars, what to do?

    When I select Type > Show Hidden characters, the display does not change and the hidden characters stay hidden. Is there something additional that I need to do to see the hidden characters?

    Under View, change your Screen Mode to Normal. In any other mode, guides and hidden characters won't show.

  • FileDialog File Types show *.txt, please help.

    Hi, I have created a very basic text editor. I created a FileDialog in order to save and open files. However, what's the method or class that I can use in order to make the File Types shows the specific extension I am looking for. e.g. *.txt instead of *.* ?

    Wow, two birds one stone:
    FileDialog fileDialog = new FileDialog( this.frame, "Save", FileDialog.SAVE );
    fileDialog.setFile( "FileNameGoesHere" );
    fileDialog.show();

  • Filedialog File type shows *.*, how can I change?

    I wanna change the file type showing in FileType in FileDialog, please help.

    This code is for JFileChoser. You should be able to adapt it for your requirement.
    JFileChooser chooser = new JFileChooser();
    chooser.addChoosableFileFilter(new FileExtensionFilter("Text files", new String[] {".txt"}));
    chooser.addChoosableFileFilter(new FileExtensionFilter("SQL files", new String[] {".sql"}));
    package net.sourceforge.squirrel_sql.fw.util;
    * Copyright (C) 2001 Colin Bell
    * [email protected]
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    import java.io.File;
    public class FileExtensionFilter extends javax.swing.filechooser.FileFilter
                    implements java.io.FileFilter {
        private String _description;
        private String[] _exts;
        public FileExtensionFilter(String description, String[] exts) {
            super();
            _exts = exts;
            StringBuffer buf = new StringBuffer(description);
            buf.append(" (");
            for (int i = 0; i < _exts.length; ++i) {
                buf.append("*").append(_exts);
    if (i != (_exts.length - 1)) {
    buf.append(", ");
    buf.append(")");
    _description = buf.toString();
    public boolean accept(File file) {
    if (file.isDirectory()) {
    return true;
    String name = file.getName().toLowerCase();
    for (int i = 0; i < _exts.length; ++i) {
    if (name.endsWith(_exts[i])) {
    return true;
    return false;
    public String getDescription() {
    return _description;

  • Bold font showing up as outline system wide

    At first I thought it was a browser issue.
    Certain h1 elements were showing up as outlined when I knew they shouldn't be.
    Ex:
    http://markgretzinger.com/fontissue/fontissue_browser.png
    ...but then I noticed it in the dashboard as well:
    http://markgretzinger.com/fontissue/fontissue_dash.png
    It must be an incorrect system font, right??
    How do I identify which one?

    Hi digsafe, and a warm welcome to the forums!
    How do I identify which one?
    Go to that page, then view Source, see which font it's calling out.
    I suspect Helvetica of some kind, likely Helvetica Nueue...
    http://discussions.apple.com/thread.jspa?messageID=8220349&#8220349

  • HT4060 Hi when i connect the ipad it is showing the battery outline with red stripes and no charge signaling and the display alternates between the battery outline and apple logo. Kindly help

    Hi
    When I connect my ipad for charging, it is showing the battery outline with red stripes at the bottom and the display alternates between this picture and the apple logo. This happened when i connected to the main power and also when tried charging through my macbook. Please help.

    First step is a SMC reset:
    http://support.apple.com/en-us/HT3964
    Your font is a bit excessive.
    Ciao.

  • Document Type showing as Bill of Entry instead of Invoice in report

    Dear Gurus,
    in J2i9 report for Proforma register under rule 9 (5) of cenvat credit rules , 2004 ,
    we are generating a report using "inputs" as an option for Print Annexure for Material type ,
    in which for a domestic supplier , we are getting several document numbers for
    part II serial numbers , one entry is showing the type of document as "Bill of Entry" ,
    where it should have come as "invoice" , all other entries for the same supplier are showing
    correctly as "invoice". This has caused the finance dept to block payment to the supplier .
    this entry belongs to previous posting year. still remains unresolved. Please guide.
    Thanks in Advance.

    Dear Gurus ,
    Excise duty is not getting captured in this invoice due to document type wrongly coming as "Bill of Entry "
    which is for imports ( cenvate credit availed = 0). Please give direction as to why the wrong document type is getting selected
    only for a particular entry of a domestic supplier , and how to correct this entry. thanks in advance.

  • List with multiple custom content types - Show content type selection option in the list newform page

    In my project I am using SharePoint Online 2013 and there is a custom list with two content types. While creating a new item in that list, can we show the content type drop down list along with other columns? While editing an item I am able to view the content
    type dropdown in the edit form associated with the list. Can we enable the same for the default newform as well?

    In my project I am using SharePoint Online 2013 and there is a custom list with two content types. While creating a new item in that list, can we show the content type drop down list along with other columns? While editing an item I am able to view the content
    type dropdown in the edit form associated with the list. Can we enable the same for the default newform as well?

  • Document types show up twice when creating a new blank HTML document.

    I followed the below instructions for getting HTML 5 as a document type option  on CS4. Although I do have HTML 5 as an option now, my other stock CS4 document type options now show up twice in the menu. Any idea how to fix this?
    To add the HTML document type, however, you need to modify the file named MMDocumentTypeDeclarations.xml. Here’s how to do that:
    1. Find the configuration folder then navigate to the documenttypes folder. The Configuration folder can be found under the folder where you installed Dreamweaver.
    2. Find and make a backup copy of MMDocumentTypeDeclarations.xml (MMDocumentTypeDeclarations.xml.bak)
    3. Open MMDocumentTypeDeclarations.xml in your favorite text editor. If anything goes wrong, you can always get back to the default state by replacing your changes with the backup copy.
    4. Go to the end of the document and find the </documenttypedeclarations> tag and add the following lines just before the </documenttypedeclarations> tag:
    <documenttypedeclaration id="mm_html_5">
    <title>
    HTML5
    </title>
    <doctypedecl>
    <![CDATA[<!DOCTYPE HTML>]]>
    </doctypedecl>
    <rootelement>
    <![CDATA[<html></html>]]>
    </rootelement>
    <dtdcontext>html</dtdcontext>
    <dtdcontext>html5</dtdcontext>
    <dtdcontext>frameset_frame</dtdcontext>
    <dtdcontext>xslt</dtdcontext>
    </documenttypedeclaration>
    5. Save the document
    6. Restart Dreamweaver
    You should now have an HTML5 document type option when you create a new document.
    There was an issue with Dreamweaver CS4 that needed to be fixed in code to fully support HTML5 documents which is why upgrading to CS5 was recommended. In CS4, Dreamweaver’s definition of a well formed HTML document has a meta content type which isn’t required for HTML5 documents so, no matter what we do to CS4, any HTML document created by CS4 will have the following:
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    Replace that line with this:
    <meta charset=utf-8">
    You’ll need to do this every time you create a new HTML5 document.
    Once you finish go to Preferences New Document and select HTML5 as default Doc Type...
    Thanks to:
    What I did was create a snippit of the meta and added it to my snippit's meta folder
    Jeff Booher
    Dreamweaver Engineering
    Thanks for your feedback. 

    Hi,
    I have done a test and I can reproduced your issue.
    I referred to the blog about Automatically create Word documents which include list fields:
    http://blogs.technet.com/b/brenclarke/archive/2009/04/15/automatically-create-word-documents-which-include-list-fields.aspx
    When I create a multiple line of text column in a list, I just choose Plain text, Then I solved the issue:
    Besides, here is a similar post, you can take a look at:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7ab3a61-6643-4a47-a464-fe46b5db1558/rich-text-field-showing-html-code
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Payment on account document type showing JE

    Hi All,
    Have a question around the system behaviour of the following scenario:
    a.     Create a payment on account for BP X
    b.     Open the Incoming Payment screen again and enter BP X
    c.     The list of transactions show the above payment as JE instead of RC. It also shows it in blue instead of the normal black fonts
    JE is for Journal Entry, but this is not a Journal Entry, it is an Incoming Payment, so shouldnu2019t it say RC? We are thinking it doesnu2019t make sense to say JE when it is an Incoming Payment. The SAP Help (on Incoming Payments: Customer & Vendor - Table Area) says: u201CDocument Type: Displays the type of document or transaction. For example, IN represents A/R invoiceu201D.
    Also, the Document Number column shows the Journal Entry transaction number, not the Incoming Payment number. For all other documents, when you click on the orange arrow next to the document number it takes you to the originating document, but in this case it takes you to the Journal Entry.
    Is there a possibility this might be changed in future versions?
    Many Thanks,
    Matt

    Hi......
    Link the field of Account code to OACT and display the Account name.
    Regards,
    Rahul

  • Workflow attached to content type shows the status as 'Starting'

    Hi,
    I have developed a workflow to distribute documents from Drop Off library to different SharePoint libraries based on the content type that the document uploaded to.
    The drop off library has been configured incoming mail settings hence the documents would be on boarded to drop off library through e-mails. In this scenario, my workflow should be triggered when the document is on boarded through email.
    Another scenario, the user can upload the document to different content type manually and updates the respective meta data values. This scenario, my workflow should be triggered when the item updated.
    So, I have configured my workflow should run on the content types and trigger when item is created through e-mail and item is updated by manual.
    The document on boarded through e-mails are working fine as soon as the item is created.
    Issue:
    The workflow associated on a content type which needs to be triggered on item created is triggering as soon as the user uploads a document manually and shows the status as 'Starting'.
    The workflow associated on a content type which needs to be triggered on item modified is triggering as soon as the user updating meta data values after document is uploaded. Hence, throwing an error
    'cannot open a file from drop off' library exception when I try to read file using C# code as file stream bytes.
    Configuration:
    1. The content types are having mandatory fields which has a default values set.
    2. The document version settings are set as check out the document when editing the properties.
    Please help me to resolve this bug and let me know if you need more details.
    Also, let me know how can we cancel the workflow if it is in 'starting' mode.
    The workflow should run the document is onboardedwhen an item is created and

    Hi,
    According to your description, my understanding is that you want to get data from content type in JSlink.
    I suggest you can get the content type data in JSLink using JavaScript Client Object Model.
    Here are some derailed code demos for your reference:
    http://sharepoint.aspcode.net/view/635399286724222582163436/sharepoint-how-to-get-field-value-using-jsom-jslink-without-async-call
    http://sharepoint.stackexchange.com/questions/93777/how-to-get-contenttype-name-in-clientsidejavascript-jquery-csom-etc-in-editf
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • How do I delete objects that only show up in outline view?

    I have hidden objects in a file that only show up in the outline view. It will not let me select them and it's making the file larger then it needs to be. Any ideas to be able to get rid of these unwanted objects? Thanks!

      There is nothing that is locked and it's only one layer. The normal view shows the ad as I need it but when I switch it to outline view there is a completely different ad stuck behind it, it will not let me select any of it to delete it and its making my file size way larger then needed. I tried to make a new file and move the normal ad over but it takes the entire thing with it. There has to be a way to get rid of that ad that's found its way in there somehow.

  • Wrong procurement type showing in the material master

    Hi,
    I am creating a material Procurement type is comming as E in the MRP2 view, To where it is comming?
    I have checked the material type setting in the tcode OMS2 and it below are showing there:
    Ext. purchase orders   2
    Int. purchase orders   2
    Hence it's allowed int. and ext. proc. then why in the material master procurement type is comming E not X.
    How can I change it?

    Check to see if you have assigned an MRP Profile which has defaulted Procurement Type. If this is the case, you will have to remove the MRP Profile before you can change the entry. Or you can maintain the MRP Profile by deselecting "Write-protected in material maintenance" and selecting "Only default value in material maintenance" for Procurement Type. The Transaction is MMD2.
    BR,
    Krishna

  • Basic type show in WE05 not same as per defined

    Hi All,
    I have created a customised message type ZMATMAS1, using customised basic type ZMATMAS1 too.
    already assigned in WE81 WE82 BD69 & activated in BD50
    When idoc generated from BD21, I found that the idoc in WE05 shows the  basic type is MATMAS05, why it doesn't follow ZMATMAS1 as I defined ?
    Thanks in advanced

    Hi Janice,
    Sorry, just noticed that I initially read your posting wrong. You have defined a new basic IDoc type and not a new extension type. So my reference to the customer exit is not applicable, because the one I referenced cannot be used to change the basic IDoc type.
    Have you taken a look at message type MATCOR with IDoc type MATCOR01 (basically MARA + MAKT)? This might be what you want if you just need some basic material data.
    I can't use reduced type of MATMAS bcos some mandatory fields cannot be omitted.
    I'm not aware of any mandatory fields. Within IDocs you have a concept of mandatory segments and you cannot remove mandatory segments via IDoc reduction. So for MATMAS05 you cannot remove E1MARAM and E1MAKTM, but other segments you can remove. Thus a reduced message type actually is an option.
    Cheers, harald

  • Polar chart type: show different values

    Hello,
    I have a polar chart type it would be work pretty good but I have a question. For the chart type I created a query and the result looks so:
    <b>Region</b>  <b> real Value   calValue</b>
    EMEA                 -5%                 95
    LATIN                  8,3%               108,3%
    For the chart type itself is the calValue e.g. 95 important. But I want to see the Value -5%.
    That means the chart type pictures works with the calValue but the User should see the realValues. Is it possible?
    Thanks a lot for your help
    CU
    patty

    Check out our sample reports by downloading them. Most have charts to show you how to use them.

Maybe you are looking for