U310 clickpad button problem

Sorry if this has been discussed already; could not find it with search.  I am having a problem with the cursor moving when I click either of my buttons because the active area of the pad includes the buttons.  It is very annoying and limiting with the right button especially.  I have been to the Synaptics pointing device properties area numerous times and looked extensively for a way to adjust the active area to eliminate the problem, all without success.  This problem is making me quite unhappy with my decision to buy a U310.  Any help would be much appreciated.

hi hfa29155,
Welcome to the Lenovo Forums.
Can you try to boot the computer in Safe Mode and observe if you still get the same issue. If everything's ok, there's probably an application on the background that's causing those pages to open up. Try to perform a clean boot and observe the PC.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Synaptics Clickpad Button Movement

    Alright, quick question. I just bought a new HP computer with a Synaptics Clickpad (V7.4?) and this is the only thing bothering me about this computer so far. I notice that moving my finger anywhere on the mousepad causes the cursor to move, including on the right and left buttons at the bottom of the mousepad. Is it possible to turn off some setting that will prevent the cursor from moving if I have a finger moving on the bottom buttons and only allow movement in the area above them (which is how every laptop I've ever used works)? It's not a huge deal, and I can adapt if it isn't possible, but I like to scroll with my middle finger and have my index finger on the left button. Doing this right now doesn't quite work right unless I keep my index finger absolutely still.

    hungar wrote:
    bonjour
    j'ai un probook 4525s et j'ai le même problème avec le clickpad ,les boutons de gauche et de droite sont également des zone de défilement
    je cherche à trouver une solution afin que ceux ci est une fonction normale sans déplacement
    j'ai régardé dans les réglages mais pas de solutions 
    merci à vous
    I just installed my Rosetta Stone French program last night so it will take me a while before I can understand what that says.  However, Google offers an instant translation for me:
    hello
     I have a 4525 probook and I have the same problem with the ClickPad, buttons left and right are also scroll zone
     I try to find a solution so that those is a normal function without moving
     I looked in settings but no solutions
     thank you,
    All I know is when I RIGHT click on the Synaptics icon in the lower right of the Windows taskbar on my notebook and select 'Properties' it brings up a box with several tabs.  When I click on the tab marked 'Device Settings' it opens a window with a 'Settings' box in it.  When I click on the 'Settings' box a whole lot of things become available to change.  This includes the touchpad sensitivity, the touchpad sensing area size and many other options.  If yours does not have this you might try updating your Synaptics driver and see if it helps.

  • Caller screen Buttons problem Z10STL100-1

    I have Z10STL100-1 after official update Z10STL100-1/10.3.1.1565 having caller screen Buttons problem these are little above not like it's on 10.2 very below position. I security wipe and restart many times still same position of buttons? See pic attached

    Hello,
    Did you check if there are no objects on that index slide that have a fading transition? You should set the transition for every object to 'No transition'. The transition can be found in the Properties dialog, tab Options.
    Lilybiri

  • Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

    Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

    iPhones do not have an international warranty.  Warranty is valid only for the country of purchase.  This is most likely because different countries require different iPhone models.  Not reasonable to expect all countries to maintain stock for all models.

  • **URGENT** Scene button problem!

    Why my 'maps' and 'video' buttons do not play the movie? I use this code:
    on(release){gotoAndPlay("play");}
    I have labelled "play" in other scene, but it does not play the movie!
    I have tried this code:
    on(release){gotoAndPlay("Scene 36", "play");}
    Still, it does not work as well! I got deadline this week, so I need your help ASAP!
    I got other button problems on every scene! It's frustrating!
    Please download my flash file to look at my flash product!
    http://www.4shared.com/file/24177440...6d/Maps_1.html

    Nope it doesn't work , I got my deadline this week and if you got a spare time, would you please download my flash and check and repair it please! Only two buttons need refitting and nothing else! I asked my teachers, they tried their best and couldn't find what the problem is. I looked through other forum website, I tried the solutions and it doesn't work! I am really behind as there are many failure in my project! This is my first flash creation.

  • Naming Buttons - Problem with using Captivate 7 Buttons to Open URL or File

    After spending too much time troubleshooting a button problem, I discovered the importance of naming each item in a Captivate project.
    For some reason I have yet to figure out, publishing to SWF from Captivate causes buttons to function arbitrarily. In my case, I had eight buttons pointing to external URLs, three that worked and five that didn't. All of the buttons pointed to the same external website, only to different PDFs hosted on that site. Each button was named with the default "Button_X" convention as set by Captivate. After trying lots of different settings adjustments, On Enter and On Exit actions, and Play/Pause timings, I did what I should've done from the beginning; changed the names of the buttons.
    Why this worked? I don't know. I've seen hints on other discussions as to SWFs not working well when there are a lot of unnamed or default-named items. If there's some logic to this I would be happy to know it, but for a default setting to cause such a bizarre problem is beyond my comprehension. I could understand if I had named the buttons incorrectly, but I didn't do anything to them; I left them with the names created by default.
    Hopefully this helps someone else resolve a similar issue and, if anything, encourages everyone to follow best practices and use a clear file naming conventions for all projects.

    Hi there
    Perhaps the link below will help?
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • K button problems

    K button problems on keyboard. Has to be pressed harder than all the other butons on the keyboard. Ive tried going on  command prompt and pressing it, and its the same. I am running windows 7 pro.

    you probably need to get a new keyboard if you have a model number i can send you a link on what you need thanks 

  • HT1688 iPhone 4 home button problem

    Good afternoon,
    I have an iPhone 4 and it still in good condition but sometimes, the Home button doesn't respond quickly or doesn't respond at all. What to do?

    I seem to have fixed my iPhone 4 home button problems.
    1. Sync phone and back up.
    2. Go back and resync phone but uncheck all the apps you have purchased/downloaded so that your iphone will have no additional apps on it.
    3. Now reset your phone as a NEW PHONE.
    4. When reset as NEW, unplug it and try home button functions. I'll bet they work just fine, like mine did.
    5. Now that you are satisfied you can resync your apps, but be choosey. Re-install only a couple at a time, and test your home button each time. You'll soon find out which of your apps is causing the problem. It's time consuming and irritating, but it certainly works.
    So far - no problems with my selected re-installed apps. My home button works fine.
    However, I recently purchased several photography apps and an emoticon app and that was when the problems appeared to have started.
    So I've been very selective in putting only the apps I want back on ... for now.
    Hope this helps.
    I will report back to tell you if this complicated but effective solution has worked for me.

  • Home button problem in iphone 3g 3.0

    After upgrading my iphone 3g to 3.0 software, the home button has become so unresponsive, i have to click it 6-10 times sometimes to awake it. I mean what is it, dont you check the update before making it available to public, i mean its annoying, my 2 other friends have same problem as mine, they are on iphone 3g too. even 3.0.1 behaves the same way. comeon folks, become professional, kindly fix this thing in next firmware release.

    I had exactly the same problem - I bought my iphone 3gs last week, upgraded it and had the 'home button' problem. I tried all the fixes - restarting, resetting to factory settings, reloading update, etc. Then, a few days later, it all sorted itself out - no idea what happened, but since then my home button has been working perfectly! I have a feeling the factory reset and reload of update might have been the one that eventually did the trick...but since then, touch wood, it has been working perfectly. I would suggest trying the factory reset and see if that helps...make sure you back up first though!

  • Mega 865 - HiFi Button problems !

    Mega 865 - HiFi Button problems.
    Hi,
    I recently had some problems with the LCD display on the 865 and after
    following the very technical (wiggle the power cable) instructions, i got
    the LCD display working again, but now my HiFi button doesn't work
    has anyone experienced this before ??
    The radio/lcd display works fine in media centre
    cheers.

    I refer to this post https://forum-en.msi.com/index.php?threadid=66148
    I did this and the LCD display came back on again but now the hifi button doen't work

  • Anti virus's and home button problem

    Hi
    1)i want to
    We Need antiviruse in My iPhone 5s ?
    2)how to understand my iPhone when produce???
    Due to home button problem .
    Thanks

    There is no home button problem, the problem is with the power button on some iPhone 5 devices: https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • G750 power button problem

    Hi guys,
    So the problem with my laptop is that when I press the power button, the power button itself and the two leftmost lights below the touchpad- power and battery- they light up for a second or two. But the laptop doesn't start up and the lights go off. If I long press the power button, the laptop starts, though.
    Now this is not a severe problem as of now, I know. But I'm pretty sure this will escalate into something else. Does anyone know what the problem actually is and what I can do to solve it? 
    P.S.: Unlike people with power button problems, I didn't do anything with the hardware or software.

    Hi Sanjana,
    Welcome to Lenovo Community!
    I’m sorry to hear that the Power button is not working as expected in your G750 Laptop. I would suggest you to perform the Flee-Power, below are the steps to perform the same:
    Remove the battery and any other peripheral device connected to the computer.
    Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
    If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Power Button Problem NO MORE HP!!!

    Tried everything to fix my power button, but no way,NO MORE HP.
    Today, one of my friends also had power button problem, even his laptop was one of the newest model.

    Model?

  • HP Dv7t Volume Slider Button Problem...​.........?

    Hello, i own a Hp Dv7t Notebook, in the past week my laptop has been acting differnet, My promblem starts with the volume slider button. The volume slider button is located at the top of my notebook and is touch sensitie when you run your finger over it. Before my problem the button when used would adjust the volume and make a "clicking" sound while displaying a window showin g the current volume level......Now, for some reason the button doesnt work in the same fashion as before......now when u use it the button makes no clicking sounds nor displays a windows that it used to, this problem is rather small but it has also enabled my volume to be lower than normal.......but i must say that the button does still work, it adjusts the volume as it should but doesnt do the other things..........i am computer literate and do no how to fix many of my system malfunctions, but this one has me stumped........Sorry for such a long post but i would really appriciate some help, THANK YOU!!!!!!!!
    HP Customer;
    Evan C. Ford
    Email Me Please    <text removed for privacy>
    Message Edited by WendyM on 10-26-2009 12:05 PM

    It sounds like my problem was very similar to tlee's.
    All it took was doing a cold reboot, I found the solution here: http://h30434.www3.hp.com/t5/Hardware/HP-dv4-1225d​x-Quick-Launch-Button-Problems/m-p/272053#M29072
    When tech support couldnt fix it I asked for the number to call and return my laptop. Finding that thread changed my mind.

  • Simple button Button problem

    I am making a group of buttons that when each one is
    highlighted it displays a graphic on the other side of the screen
    So after I 2* click on my button and insert frame into the
    over state I place my picture here but when I run it the picture
    comes up if I run my mouse over on the other side of the screen
    where the image is be comming up as well as comming up when I am
    over the button.
    How do I solve this problem I only want these images to show
    when I have mouse over my button and I dont want anything to show
    if I have my mouse over anything else on the screen?

    You need to put something in the Hit State of the button. It
    typically takes the last keyframe in the timeline to use, which, in
    your case, includes the image. You should put a blank keyframe in
    the Hit State, and copy the Up State's contents to it. Then the
    over state will only be triggered when the user rolls over the Up
    state graphics.

Maybe you are looking for