UAG 2010 and AD version

We are running UAG 2010 SP1 to support Exchange Active Sync; Outlook WbApp; Outlook Anywhere against Exchange 2010 SP3. The authentication servers are running AD 2003. We need to upgrade to a new version of AD and checking compatibility of our applications.
Does UAG 2010 SP1 support AD 2012R2? AD 20112...?
Thanks

I would highly recommend you to move to UAG latest SP4 which supports windows 8/8.1.
The only issue i faced was my Windows 7 clients unable to RDP to 2012 and 2012 R2 Domain Controllers. Please check below blog article for the problem and the fix.
http://itcalls.blogspot.com/2013/07/windows-7-uag-direct-access-clients.html

Similar Messages

Exchange 2010 and Synchronizer Version 14.0.7108 (Sync Errors with Outlook and ActiveSync)

I have a user getting multiple emails (10-20) every day pertaining to Synchronizer Version 14.0.6109
Here is a sample:
11:09:31 Synchronizer Version 14.0.7108
11:09:31 Synchronizing Mailbox 'xxxxxxx'
11:09:33 Synchronizing server changes in folder 'zzzzzzz - Calendar'
11:09:34 Downloading from server 'xxxxxxlan.net'
11:09:35 Error synchronizing folder
11:09:35                  [80070005-508-80070005-560]
11:09:35                  You do not have sufficient permission to perform this operation on this object. See the folder contact or
your system administrator.
11:09:35                  Microsoft Exchange Information Store
11:09:35                  For more information on this failure, click the URL below:
11:09:35
http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
11:09:35 Done
9:26:06 Synchronizer Version 14.0.7108
9:26:06 Synchronizing Mailbox 'xxxxxx'
9:26:06 Synchronizing local changes in folder 'Drafts'
9:26:06 Uploading to server 'xxxxxx.net'
9:26:06 Synchronization of some deletions failed.
9:26:06           [0-130]
9:26:06     1 item(s) deleted in online folder
9:26:06 Done
14:10:01 Message class: {SU:IPM.Note}
14:10:01 Mail Conflict Resolution
14:10:01 Local subject: {SU:Modification Resolution}
14:10:01 Remote subject: {SU:Modification Resolution}
14:10:01 Local Message Entry ID: {CB:70, LPB:0x000000004C521F45AF387146A60CA3323B67D04707002BE9FDD1BCA97D40BA307827218DB8F000000B31DB240000A7551752DD78844FA0521ED41E1AF099005F6F9512450000}
14:10:01 Remote Message Entry ID: {CB:70, LPB:0x000000004C521F45AF387146A60CA3323B67D04707002BE9FDD1BCA97D40BA307827218DB8F000000B31DB240000A7551752DD78844FA0521ED41E1AF099005F6F9512450000}
14:10:01 Local Message ChgKey: {CB:20, LPB:0x25576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Remote Message ChgKey: {CB:20, LPB:0x25576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Local Message PCL: {CB:21, LPB:0x1425576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Remote Message PCL: {CB:21, LPB:0x1425576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Checking local modifications
14:10:01 Overwrite property: 0x10800003
14:10:01 Overwrite property: 0x10810003
14:10:01 Overwrite property: 0x10820040
14:10:01 Compare property: 0x3FDE0003
14:10:01 Getting remote properties
14:10:01 Checking remote modifications
14:10:01 Compare (conflict) property: 0x3FDE0003
14:10:01 Local: {I4:28591}
14:10:01 Remote: {Error (0x8004010F)}
14:10:01 Not equal (conflict) property: 0x3FDE0003
14:10:01 Local modification: {19:09:41.0274 11/11/2014 [DD/MM/YYYY]}
14:10:01 Remote modification: {19:09:41.0274 11/11/2014 [DD/MM/YYYY]}
14:10:01 Forcing Local item to win.
14:10:01 Conflict generated, local item is winner
The server is exchange 2010
The user uses outlook 2007, 2010 and 2013 on multiple work stations and laptops as well as active sync on a mobile device.
Any suggestions on how to start to diagnose exactly what is generating the issue?
networktec

Hi There,
it seems like some permisson issue and some folder/files been deleted already. Please refer to this link below
https://support.microsoft.com/kb/2606009?wa=wsignin1.0
For permission issue, is he using any shared folder on outlook and make sure he has proper access on that one too.
UMESH DEUJA MCP,MCTS,MCSA,CCNA
I saw that article, and I wasn't sure how to proceed as this user has multiple computers they log into, and I don't think it would be possible to apply these "hot fixes' on every device they use...
Outlook 2013
To improve functionality in Outlook 2013, install the Outlook 2013 hotfix package that is dated April 8, 2014. For more information
about this hotfix package, click the following article number to go to the article in the Microsoft Knowledge Base:
2878323 Description of the Outlook 2013 hotfix package (Outlook-x-none.msp): April 8, 2014
Outlook 2010
To improve functionality in Outlook 2010, install the Outlook 2010 hotfix package that is dated April 8, 2014. For more information
about this hotfix package, click the following article number to go to the article in the Microsoft Knowledge Base:
2878254 Description of the Outlook 2010 hotfix package (Outlook-x-none.msp): April 8, 2014
networktec

Exchange Server 2010 and Iphone Version 4s or 5S, HTML Rendering on Iphone

We have Exchange Server 2010 and using Iphone to receive and Send emails,
When HTML based emails are opened from Iphone, The email just shows the text and not the HTML
So the HTML is not rendered on IPhone, if the same email is FORWARDED from Outlook and opened on Iphone HTML is rendered correctly.

You either restart or reset your phone and the issue should resolve.

Windows 8.1 and UAG 2010

hi
wondering if someone out there can give some advice/help.
We are currently running a stand alone UAG 2010 SP4, our XP ( yes we still have some) and Win7 clients connect fine however I still can't get Windows 8.1 clients to authenticate.
When you launch the Portal home page ( portal.domain.com ), it prompts to install the client ( the first time ) and then once that has completed displays " your device does not meet the access policy requirements for this site". Subsequent
connections start to check and then go direct the error message.
If I check the web monitor for the failed session, it is reporting that OS and Browser are Not Detected. I have made the changes that others recommended for NT6.3 but that hasn't made any difference.
thanks in advance

Please make sure that all 64 bit operating systems or specifically windows 8.1 is picked in the allowed list of Operating systems from the End point settings
You can only allow specific Windows versions as Windows 7 SP1, Windows 8 or any 64 bit Windows version
to access your portal while denying others.
From the UAG console, click on the HTTPS connection for your Portal link then:
1. Trunk Configuration settings - click configure
2. Go to Endpoint Access Settings
3. Session access policy - Endpoint policy
4. You can edit the default or create a new one with your corporate settings (recommended way)
5. Edit Endpoint policies
6. Pick the default policy or the one you created - edit policy
7. Manage Windows Policies
8. Pick the Windows Policy - Edit Policy
9. In the operating systems, enable the ones you would like to connect to the Portal.
10. Save and activate your configuration and this should do the trick.
Hopefully this will help you.
Ahmed Nabil

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

SharePoint 2010 and Reporting Services add-in - multiple versions supported?

Hello,
I would like to try out Reporting Services with SharePoint 2010. I already have the Reporting Services add-in installed on the WFE for SQL Server 2008 R2, but not configured.
At this point I thinking it's best to move forward with SQL Server 2012.
Can both the 2008 R2 version and 2012 version of the Reporting Services add-in exist on the same WFE in separate instances? Or do I need to uninstall the 2008 R2 version first?
Thank you in advance,

Just upgrade to the 2012 version, you don't have to uninstall first.
Also, see the supported combinations of SSRS version and Addin version:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Use the highest version of the addin possible, as newer addins have offered performance improvements.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

UAG 2010 SP4 and Outlook 2011 for MAC

Hi
We have UAG 2010 SP4 with trunk where autodiscover and EWS services are published without pre-authentication (Authorize all users). Exchange 2013 accepts basic auth on services.
RCA tests for Outlook Anywhere are passing and we can configure any windows/Outlook2007+ from internet through UAG using autodiscover.
However with Outlook2011 for MAC does not go through the mail account creation process when connecting to UAG.
According to Outlook logs, it will connect to autodiscover service and receive correct service urls for EWS, OAB etc.
After autodiscover, it tries to connect to EWS which fails and logs following UAG message
"<DIV style=""" id=""Error_Msg"">You are not authorized to access the application.</div>"
However with browser and same credentials I can connect to all service urls and they popup authentication prompt and lets user in. Outlook 2011 MAC works when connecting directly to Exchange so this is 99% sure an UAG issue.
Any suggestion where to look at?

I guess you already went through this http://technet.microsoft.com/en-us/library/ee921443.aspx
On Exchange, there is a command related to Outlook for Mac
Set-CASMailbox -Identity <alias> -EWSAllowEntourage:$True –EWSAllowMacOutlook:$true –EWSAllowList:"*+Mail*"
According to the blog entry below, if you publish with UAG/TMG it has to be enabled on the Organization level :
http://blog.hametbenoit.info/Lists/Posts/Post.aspx?ID=197
Please don't do it in production, it is just a suggestion :)

Where has Menu Item : "Edit Links..." within MSP (Standard or Professional) 2007 gone to in version 2010 and/ or 2013 ?

Hi folks,
Can someone please tell me where I can find the "Links..." menu item in version 2010 and ver. 2013 that is under the EDIT menu, up until MS Project (Standard or Professiona) version 2007 ?
Just as a refresher, the Links dialog window has an Update Now,
Open Source, Change Source..., and Break Link
buttons, etc.
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

You're welcome Spiro.
Maybe it is the tool you're talking about, but here is the
link to an excel file with the correspondance between 2007 and 2010 menus.
Guillaume Rouyre - MBA, MCP, MCTS

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...

Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene

How to configure array for UAG 2010 with topology Between a frontend firewall and a backend firewall

Hi,
We want to publish exchange 2013 through UAG 2010. What is the best topology for UAG 2010?
Can we configure UAG 2010 arrawy with topology "Between a frontend firewall and a backend firewall" ?
Can we configure UAG 2010 array in workgroup?
What is the drawback to use ARR to publish exchange 2013?
Thanks
Jitender
jitender

Hi Jitender - I have doen quite a few UAG deployments like this and is fully supported sitting in a DMZ between Firewalls. However, for an array the UAG Servers muts be domain joined. In these deployments the question is whether to place a Domain In the
DMZ (locked down of course) or allow traffic through to a domain controller via the backend firewall.
The link you require is here -
http://technet.microsoft.com/en-gb/library/ee428826.aspx
Kr
John Davies

Sharepoint Foundation 2010 and SSRS

Hi I have one small problem with Sharepoint Foundation 2010 and SSRS Integrated mode.
We have one installation with frontend and backend server, backend is installed on SSRS server and Kerberos authentication is enabled.
There are no problem to view reports with webparts but when you make one automatic subscription to make Report PDF files in one file share, it makes 5 och 30 files.
I can only find this in log files:
w3wp!library!18!01/26/2015-19:20:33:: i INFO: Skipped creating a dump file for the error InternalCatalogException, because a dump with the identical stack trace (with signature 1778776910) was already created.
w3wp!library!18!01/26/2015-19:20:33:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Unhandled exception in timer Database version check, Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details. ---> System.InvalidCastException: Unable to cast object of type 'System.DBNull' to type 'System.String'.
at Microsoft.ReportingServices.Library.ConnectionManager.GetDBVersion(Boolean rethrow)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage(VersionVerificationOptions option)
at Microsoft.ReportingServices.Library.DatabaseVersionCheckTimer.DoTimerAction()
at Microsoft.ReportingServices.Diagnostics.TimerActionBase.TimerAction(Object unused)
--- End of inner exception stack trace ---;
Any ideas?

Hi Dalibor,
Based on your description, my understanding is that the error occurred when automatically making Report PDF files.
Could you please provide the version of SQL server in your environment?
If you are using SQL server 2012, I recommend to update the SQL server with SP1 and CU7 to see if the issue still occurs.
And please also re-configure the Reporting Service Application and then check the results:
https://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
https://msdn.microsoft.com/en-us/library/gg492276(v=sql.110).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

Office 2010 and Office 2007 on same machine

I am currently running the following:
Xcelsius Engage 2008, service pack 4
Windows 7, 64 bit
Office 2007 Ultimate, 32 bit
Everything working well
I purchased a version of Office 2010 Home and Student - it has both 32 and 64 bit versions. My plan was to keep Excel 2007 on my machine so that Xcelsius would still work. Then, I loaded the 64 bit version of 2010. It seemed to work for a session, Xcelsius seemed to pull on the Excel 2007. Then I restarted my machine and Xcelsius could not launch excel. It seemed to occur right after I tried to import an xls that had been created in Excel 2010.
My question is: is it possible to successfully run Xcelsius with Office 2010 Home Student 64 bit? Should my strategy of keeping Excel 2007 have worked? Or should I accept 32-bit is the reality for the next few years?
Also, I see that Xcelsius does not support the Home and Student version of Office. Why is that? Isn't excel, powerpoint, word, the same regardless of the version?

Hi,
As soon as you restart your system office version is updated to latest version of office that you have installed(64 bit)
Go through the following link for supported platforms and versions :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601b2c00-da68-2e10-7c81-af37a0a6d378.
Hope this link can clear all your doubts .
@Sri

"This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint 2010 and Publishing Approval workflow.

I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
2010 and Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
Versioning Settings.
Error
This is quiet urgent issue . Any help would be really helpful.. Thanks..

Hi Marlene,
Thank you very much for your suggestions.
But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
As it works in other environment, I tried figuring out the possible differences which can lead to this error.
Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
Regards,
Vineeth

UAG 2010 and AD version

Similar Messages

Maybe you are looking for