UCCX 7.0 calls abandoned after 15 minutes waiting in CSQ

Hi,
I have made a test lab environment to simulate a problem.
There is one agent and one CSQ. When I call the script trigger number the agent phone rings and I answer the call.
I keep this call on and put both phones on mute.
When I call from another phone to the trigger number I hear the prompt "you are the first waiting customer...."
I let the second caller waiting in the queue for more then 15 minutes.
When the 16th minute starts I hear another message from UCCX itself (not one of my own prompts) that the call cannot be answered. This message repeats a couple of times and then the call is abandoned.
Could you please let me know if this is default normal behavior of the UCCX system?
Is this a parameter which I can change to unlimited waiting time?
Thanks in advance,
Regards,
Ruben

This issue happened because our script exceeded 1000 lines. We saw this after debugging the script. We changed the level to exceeded after 2000 lines. We now get the error message from UCCX self after 40 minutes which for us is a workable solution.
Thank you for your help.
Regards
Ruben

Similar Messages

  • Dial tone continues after call is answered then call drops after 1 minutes

    This morning I have had problems with calling skype contacts.  After I initiate the call the person on the other end picks up but the dail tone is still in the background.  After a minute or so the dial tone go to busy and the entire call drops.

    I downloaded new version of Skype and it works. Strange that it didn't auto update since 6.21 even thought auto update was on. Now it is 6.22.

  • N80 UMTS phone call problems after 20 minutes

    When I call someone over G3 (UMTS), everytime after 20 minutes the other person could not hear me anymore.
    I have replaced my 6680 with N80. The 6680 had not this problem.
    Could someone confirm this problem? Otherwise my N80 need a repair.
    Thanks in advance

    Which firmware & network?
    Also are you staying in the same place during the call, or moving around? Signal strength?
    Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
    T-Mobile: N96

  • Cisco SX20 Call drops after 15 minutes Please help urgent !!

    Hi All,
    We have Below scenario
    SX20----> MCU<----- Polycom
    SX20 -----> Polycom
    Issue: When we make a Call from SX20 to Polycom IP to IP call or even using MCU Cisco SX20 gets disconnected after fixed interval ( 15 - 20 minutes)
    Calls from Other endpoints ---> Polycom to polycom with MCU and also 1:1 ,1: multiple over MCU works fine.
    Only issue is when Cisco SX20 comes in to the picture.
    Please sugest is it a known issue?
    Or doi we have to update firmware/licenses or any other software in cisco SX20?
    Or is it a bug?
    Or do we need to check on firewall level
    The SX20 has the latest firmware already.
    Please help !!!!!!!!
    Regards,
    Ajith

    As Martin has said above, the 15 minute disconnection issues are usually a network issue.
    Are all your devices on the same LAN, or are they at different locations?  Are you using any call control (VCS/CUCM), or are the devices standalone?  What protocol are you using (H.323/SIP)?
    If you're using NAT, have you got the NAT settings set up correctly on your devices?
    What model device is the Polycom?  Is the software on the Polycom up to date?
    There are many questions which we can ask, but need to understand your environment a little more.
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • Calls dropped after free minutes run out

    Hello,
    There is already a post on this subject, but it's back in 2013, so I figured re-raising it would be worthwhile, particularly given how annoying it is. Here is the original post:
    http://community.skype.com/t5/Rates-and-subscriptions/After-Office-365-Minutes-Run-Out-Call-Drops-Bu...
    Basically, I have some free minutes given to me every month thanks to my subscription with Office 365. When these minutes run out, my call drops - even though I have cash credit on my account. The fact it does not do a seamless transfer from my account of "free minutes" to my account of "cash" is extremely annoying. Given that most of my calls are to companies (e.g. to make payments, transfers, talk with the bank, etc) it is extremely annoying to have to reconnect with the caller, through the machine, give address/card details again, etc... And this is something that happens once every single month!! It's very annoying, and really stupid that Skype won't fix this. It's hardly rocket science to make both accounts refer to a single consolidated account.
    With increasing amounts of competition out there this is a good enough reason to take my business elsewhere. Even if it's slightly more expensive, whilst I can understand that issues sometimes take a while to fix - this seems to me like a deliberate decision not to do anything about a customer complaint, and I can't support such an attitude from a company.
    Skype - please tell me that this will post will change your mind about this issue, and that you will add this to your list of things to fix.
    E

    Miket67m wrote:
    1. It is clear that when a 60 mins subscription comes to and end the call drops rather than the call  continuting and moving to Skpe credit.  It is at best irritating and should be fixable.
    2.  If nothing else it would be helpful to have a warning flag up that the call is about to drop, particular if the call is important.  Sort it out Skype!
    Hello and welcome to the Skype Community.
    1. Unfortunately, calls can't be continued seamlessly when the call charging protocol changes. In this case the change is from Subscription to Credit.
    2. I don't think that's possible but I'll check and advise.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Upgraded to 5S calls drop after a minute or so

    All calls to Miami effected - local calls (Orlando) don't seem impacted

    By connecting to ethernet and wifi you're creating a network loop back on itself. I've experienced problems like this in the past ... nothing really to do with Apple TV. Try one or the other, WiFi or Ethernet ... assuming you have a wireless router that's hooked up to you high speed modem.

  • Cisco SX20 Call drop issue after 15 minutes !!!!! urgent help needed !!!

    Hi All,
    We have Below scenario
    SX20----> MCU<----- Polycom
    SX20 -----> Polycom
    Issue: When we make a Call from SX20 to Polycom IP to IP call or even using MCU Cisco SX20 gets disconnected after fixed interval ( 15 - 20 minutes)
    Calls from Other endpoints ---> Polycom to polycom with MCU and also 1:1 ,1: multiple over MCU works fine.
    Only issue is when Cisco SX20 comes in to the picture.
    Please sugest is it a known issue?
    Or doi we have to update firmware/licenses or any other software in cisco SX20?
    Or is it a bug?
    Or do we need to check on firewall level
    The SX20 has the latest firmware already.
    Please help !!!!!!!!
    Regards,
    Ajith

    Please refer to your duplicate thread in the TelePresence section of the forums: https://supportforums.cisco.com/discussion/12383611/cisco-sx20-call-drops-after-15-minutes-please-help-urgent.
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.

  • My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    Hi Richard,
    You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
    Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
    TIA
    Geert

  • My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

    Hi Richard,
    You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
    Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
    TIA
    Geert

  • Calls to phones dropping after 1 minute

    Hi I am using an Iphone 5 and when i am making a call to mobile/landline after 1 minute call just hang up and I can start hearing a recording of conversation whats been talked within that 1 minute. Any help on this please??

    I am also facing the same issue, I have a Skype subscription to make calls to India and I also have Skype credit.
    I have just installed the skype on my new Iphone 5, When I am making call to land landlines or mobile in India and when the recipient picks up the phone Skype the call dropping immediately every time. This has been happening for the last six weeks. An occasional call gets through but my experience is that 99% of them don't. Please help me to resolve this issue.

  • UCCX 9.0(2) - CUIC Reports Call Abandoned calls inconsistencies

    Hi,
    We are finding that the there are inconsistencies in the abandons figures shown for a CSQ report for 'Contact Service Queue Activity Report' and the calls that are shown in the 'Abandoned Call Detail Activity Report'.
    For example if I view a CSQ in  'Contact Service Queue Activity Report' I see that there are 18 calls abandon today with 9 dequeued.  However I when run  'Abandoned Call Detail Activity Report', I can only see 4  calls showing for that CSQ.  Before I got to TAC with this has anyone else seen this? 

    Hello Saeed, Kiarash,
    Page 212 on this document explains why.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/programmin...
    Q.Why do the number of abandoned calls shown on the Abandoned Call  Detail Activity Report and the number of calls shown on the Contact  Service Queue Activity Report not match?
    A.These values can differ  because a Contact Queue Detail record may mark a call as dequeued while a  Contact Call Detail record marks the call as abandoned. For example,  consider the following workflow:
    Start
    Accept
    Prompt
    Select Resource
    -Connect
    -Queue
    --Play Prompt (Prompt2)
    --Dequeue
    --Play Prompt (Prompt3)
    End
    If  a call is abandoned during Prompt2 or Prompt3, the Contact Queue Detail  record will mark the call as dequeued but not abandoned from any queue.  The Contact Call Detail record will mark the call abandoned.
    In this  case, the Contact Service Queue Activity Report will show the call as  dequeued from all CSQs for which the call was routed. The Abandoned Call  Detail Activity Report will show the call as abandoned from all from  all CSQs for which the call was routed.
    Another reason is that the call gets aborted after being in the queue.
    Such  calls get marked as aborted in the Contact Call Detail record, and as  dequeued (if it was dequeued before aborting)/abandoned in Contact Queue  Detail record. In this case the CSQ reports will display more abandoned  calls than the Abandoned Call Detail Activity Report.
    Thank you,
    Shadi

  • Very slow first Mobile Service call after one minute incativity

    My mobile service api (basic tire) response about 30 sec delay for the first call. The subsequent calls are fine but the first call even sometimes times out. Which is totally unacceptable. The worse is that after one minutes inactivity it stars again.
    It uses SQL Server (Standard tire) which is the culprit I guess. Because if I do a manual db query before
    the time lag of the api call disappear. I set up automated api calls  requesting db quires in about every minutes but did not helped. Looks like they are screened. 
    What should I do until I have enough customers to get an api call every minutes?
    It's a quite important issue because due to the bad user experience the app will never have enough customers.

    I have done a lot of testing to gain more accurate data about the case. It's quite time consuming because I have to wait some minutes after each testing. I focused this time only one of my stored procedure and measured it from the app, from browser and from
    VS SQL Server and turned out I was wrong there is a similar significant time lag from all method and if I wait enough about half an hour in all method the stored procedure call will time out. Thus, the underlying issue is probably in SQL Server.
    The VS SQL Server provides the following error massage:
    Msg 4083, Level 16, State 1, Procedure likingProbability, Line 51
    The connection was recovered and rowcount in the first query is not available. Please execute another query to get a valid rowcount.
    The actual rowcount in the code:
    SELECT @howGood = howGood FROM goodforme.Scans WHERE itemId = @itemId AND userId = @userId
    IF (@@ROWCOUNT > 0 AND (@howGood = @MAX_RATE OR @howGood = @MIN_RATE))
    BEGIN
    SET @howGoodPrediction = @howGood
    RETURN
    END
    For me it looks like the rowcount should be valid. 
    In the second call the response is valid but with huge delay like 20 sec, but in the subsequent calls it's linearly reduced to about 1 sec. And if the next call happens about 30 sec later the response will have increase again to about 10 sec time lag and so
    on. Thank you for helping to solve the issue.

  • When calling or receiving calls, after a minute or so, is the call, give notice "call failed, THEN RUNS OUT OF SERVICE, then activated" SEARCHING "and then restoring the coverage. THIS FOR THE 100% of calls

    When calling or receiving calls, after a minute or so, is the call, give notice "call failed, THEN RUNS OUT OF SERVICE, then activated" SEARCHING "and then restoring the coverage. THIS FOR THE 100% of calls

    You may have a bad sim, contact your phone carrier and see if you can get a new one.

  • UCCX 7 : Report calls answer before & after SLA

    Hi all,
    There's a default report (CSQ Activity Report) available which is able to calculate the above based on the SLA set (for that CSQ say 30 seconds), is there a way to differentiate it based on other SLA (for example 20 or 40 seconds)?
    Thanks!
    -JT-

    This issue happened because our script exceeded 1000 lines. We saw this after debugging the script. We changed the level to exceeded after 2000 lines. We now get the error message from UCCX self after 40 minutes which for us is a workable solution.
    Thank you for your help.
    Regards
    Ruben

Maybe you are looking for