Udev startup load time doesnt appear anymore
I installed some packages (splashy etc) wich created a lot of pacsave files and messed up my system pretty much. But nothing couldnt handle.
Exept this: udev doesnt show the overal loading time anymore it skips to the next operation.
I checked /etc/start_udev script and I saw in the bottom
echo "udev startup is finished! - time = $(( `date +%s` - $starttime ))"
exit 0
which I think is the code for the loading time to show up but it is not executed somehow.
Can somethink like that can be fixed?
my /etc/start_udev script
#! /bin/sh
# start_udev
# script to initialize /dev by using udev.
# Modified for Archlinux by Tobias Powalowski <[email protected]>
# Inspired by:
# Copyright (C) 2004 Greg Kroah-Hartman <[email protected]>
# Released under the GPL v2 only.
# This needs to be run at the earliest possible point in the boot
# process.
# Based on the udev init.d script
# Thanks go out to the Gentoo developers for proving
# that this is possible to do.
# Yes, it's very verbose, feel free to turn off all of the echo calls,
# they were there to make me feel better that everything was working
# properly during development...
prog=udev
sysfs_dir=/sys
bin=/sbin/udev
udevd=/sbin/udevd
udev_root="/dev"
starttime=$(date +%s)
function trigger_builtin_events() {
list="$(echo /sys/class/tty/ttyS*/uevent)"
for i in $list; do
case "$i" in
*/class/uevent|*\**)
continue
*/class/tty/ttyS*)
echo "add" > "$i"
esac
done
function trigger_device_events() {
/sbin/udevtrigger
function wait_for_queue() {
# loop=20
# while ! [ "$loop" -gt 0 -a -d /dev/.udev/queue ]; do
# sleep 0.1;
# loop=$(($loop - 1))
# done
/sbin/udevsettle
make_extra_nodes () {
# there are a few things that sysfs does not export for us.
# these things go here (and remember to remove them in
# remove_extra_nodes()
# Thanks to Gentoo for the initial list of these.
ln -snf /proc/self/fd $udev_root/fd
ln -snf /proc/self/fd/0 $udev_root/stdin
ln -snf /proc/self/fd/1 $udev_root/stdout
ln -snf /proc/self/fd/2 $udev_root/stderr
ln -snf /proc/kcore $udev_root/core
mkdir $udev_root/pts
mkdir $udev_root/shm
udev_init () {
# don't use udev if sysfs is not mounted.
if [ ! -d $sysfs_dir/block ]; then
exit 1
fi
echo "mounting... ramfs at $udev_root"
mount -n -t ramfs none $udev_root
# propogate /udev from /sys
echo "Creating initial udev device nodes:"
#echo "making extra nodes"
make_extra_nodes
# check if udevd is already running
if [ `pidof -o %PPID /sbin/udevd` ]; then
grep -v "/dev/shm" /etc/mtab | grep -v "/dev/pts" > /etc/mtab
mount /dev/pts
mount /dev/shm
else
echo "start udev daemon"
/sbin/udevd --daemon
fi
case "$(uname -r)" in
2.6.[0-9]|2.6.[0-9][!0-9]*) ;;
*) if [ -f "/sys/class/tty/console/uevent" ]; then
echo "Kernel >= 2.6.15 and supports uevents"
# trigger the sorted events
echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
# catch events that are real fast
mkdir -p /dev/.udev/queue
trigger_builtin_events
else
# for older kernels without uevents will be removed when udevstart dies in udev
echo "Kernel does not support uevents, you need a kernel >= 2.6.15!"
exit 1
fi
esac
udev_uevents () {
# configure all devices
trigger_device_events
# until we know how to do better, just wait for _all_ events to finish
wait_for_queue
if [ $# -eq 0 ]; then
udev_init
udev_uevents
fi
[ "$1" = "init" ] && udev_init
[ "$1" = "uevents" ] && udev_uevents
echo "udev startup is finished! - time = $(( `date +%s` - $starttime ))"
exit 0
edit: I forgot I'm using udev-119-1 (the latest in core)
Last edited by TreeMinds (2008-06-03 07:45:19)
Exept this: udev doesnt show the overal loading time anymore it skips to the next operation.
i think this is done by rc.sysinit which belongs to the initscript package. i do not use splashy but i can see it depends on initscripts-splash so that could be the reason.
Similar Messages
-
Facebook via iPhone doesnt appear on my facebook status anymore
Please I need your help. I dont know whats wrong, when i used the facebook application on my iPhone before, it used to appear "via iPhone". Now, it doesnt appear anymore. I have already downloaded the latest version of facebook for iPhone, but still it didnt appear.
Since Apple doesn't run or own Facebook, and didn't code the Facebook app, you should address that question to Facebook support.
-
I made the darnest mistake when I tried cleaning up my time machine drive by deleting some of the "back-up" restore points.
Since then, the external drive does not appear anymore on my mac's desktop. Nor does it appear on my windows OS laptop.
I tried using DISK UTILITY on my Mac and the drive appears there. I was able to run Repair Disk, though No Errors appear. I "cannot eject" using the EJECT button at the top of the application as it prompts me with a message
"EJECT FAILED --
The disk “WD Ext HDD 1021 Media” could not be unmounted.
Make sure that all applications and files are closed on this disk."
Same goes when I try using a WINDOWS OS machine. It does not appear on Windows Explorer. Though when it does appear in the "eject list".
I assume that deleting some of the restore points (at random) was the cause of this.
How can I repair it? I have some sentimental and personal files (i.e. family pictures) that are also stored on the drive.
Thanks in advance.Other than the Disk Repair from the Disk Utility, I would suggest resetting the PRAM: http://support.apple.com/kb/PH11243.
Tha's kind of a last ditch effort though. Can you put it in another mac computer with the mac os? Does it show up there? -
I got definition of a word by tapping twice on a word. But it only works for a few times. Ater i tap a word for speak, the feature for definition does not appear anymore?
I got definition of a word by tapping twice on a word. But it only works for a few times. Ater i tap a word for speak, the feature for definition does not appear anymore?
-
My lock button on my ipod touch doesnt work anymore
My lock button on my ipod touch doesnt work anymore please help it works fine otherwise well and the battery is all the sudden dying really fast and these 2 problems started at the same time.
- When you depress the button does it feel like it is working? Could something gotten in the space and jammed the button?
- Can you reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Have you tried restoring the iPod from backup via iTunes on your computer.
- Next would be to restore the iPod to factory defaults/new iPod
- Last, make an appointment at the Genius Bar of an Apple store. -
Hello, I own a T420i and have been experiencing very slow load times on startup. The "ThinkPad" BIOS screen stays active for roughly 5-10min before continuing like normal. Once operational the computer works fine other then an occasional freeze up (which becomes extremely annoying with a boot time of 10 min).
Thanks for any suggestions.Hi Epitome, welcome to the forums,
do you have any external devices, especiall USB storage, attached to the system when booting? If so please detach them to see if you experience the same problem.
If the system boots normally please exclude the USB devices from the boot order in BIOS; the system may be scanning them for boot information before moving on to start from the main hard drive.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Long load times and poor application performance
We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).
Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish -
We have noticed that lately iTunes U for UW-Whitewater (uww.edu) has been extremely slow, and sometimes even timing out. We have been trying this from various different locations and computers. It appears to be something on the apple side. Has anyone else seen this?
Apple Engineers: Any updates as to what might be going on?Greetings Guys;
We had the same issue yesterday, but the issue seemed to be affecting only the iTunes desktop application. When I would preview using the iPad, load times were normal. The issue seems to have been resolved this morning.
Syd Rodocker
Tennessee State Department of Education -
Long Load Times on Graphic Intensive Games
I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: OffThat's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.
-
I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.
When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.
-
If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?
Thanks for sharing this link.
I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option? -
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
How can I speed up loading time on Android?
Hello!
I'm creating an AIR app for Android and I've run into an issue with the loading time: when the user first clicks on the icon, there's 10 seconds of black screen before the first screen of my app appears. At least this happens on older Android devices. The delay is only a second or two on newer devices. I know this question has been asked before:
http://forums.adobe.com/thread/764981
http://forums.adobe.com/message/4035208#4035208
http://zehfernando.com/2011/a-mobile-air-application-post-mortem/
But I haven't been able to find an answer that's worked for me. I've tried a a preloader and I've found that even loading the tiniest app takes around 10 seconds. This is how long it took me to load an app that was just a single frame with a simple rectangle image in it. From what I've read, the issue is that the Android device is loading the AIR runtime, and this takes time - no matter how small the actual app is. I should add that I'm using captive runtime.
I'm OK with the performance on new Android devices but, as far as I can tell, Android is so fragmented that many people are still running older devices and OS versions. So, I'd like to provide a good user experience on older devices. I think a ten second wait is just too long and will kill the entire experience for many people.
Is there any update on this? Does anyone have a solution?
If I can't improve the loading time, I think I'll try to only make the app available for newer devices.
I've heard people taking about creating 'native wrapper' and somehow embedding their swf file in native code that has a loading screen. Has anyone got something like this work? I'm currently reading up on Android splash screens in native code. They seem relatively simple to create. I hope I can somehow embed my swf in a native program with a splash screen. Any help is appreciated!
Thanks!
DamianHi Anton,
Yes, I tried launching an empty project with just one frame and a simple rectange image embedded in it. This also took 10 seconds to load. Yes, I'm using AIR 4.0 as well. As far as I can tell, the issue is AIR itself is taking time to load onto the device - and this is independent of what I put in my program. I think I have three options:
1. learn to live with the delay
2. decide it's too long and not support older Android devices with my app
3. figure out if I can embed my swf in a "native wrapper" as suggested in one of my original three links.
I'm hoping to do 3, but I don't know if it's possible.
Damian -
Dynamic text doesnt appear chinese word!!!!
dynamic text doesnt appear chinese word.
i have try to set to arial unicode but still cant.
Pls help.
THxI change that line but is the same result....
If I have one event it look like this:
and if I fill all events look like this:
as you can see it doesnt align vertical....its the same alignment on the two images.... here is my code again...
var urlLDR:URLLoader=new URLLoader();
urlLDR.addEventListener(Event.COMPLETE,f);
urlLDR.load(new URLRequest("hallsXML.xml"));
function f(e:Event) {
var xml:XML =new XML(urlLDR.data);
TXThall.autoSize = "center";
TXThall.text = "";
for(var i:uint=0;i<xml.hall.length();i++){
TXThall.appendText(xml.hall[i]+"\n");
TXThall.y= Math.floor((stage.stageHeight - TXThasll.textHeight) / 2);
My page size of the project is 768 * 1024 and the position & size of the dynamic text is X: 384.0 Y: 332.5 W: 664.0 H: 405.9...
I dont know if it helps that data....
Thanks for responding and I hope you can help me figure out this... -
(LDOM) The file just loaded does not appear to be executable.
Sorry if this is not the right forum - it seems to be the closest one for things about LDOMs; plese let me know if I should post somewhere else.
I have installed LDoms_Manager-1_2.zip on a T5220 Server; following the book ("Logical Domains 1.2 Administration Guide") I set up the control domain etc, then a guest domain (cranachan) - so far all appears well. I downloaded the dvd iso of Solaris 10 (sol-10-u7-ga-sparc-dvd.iso) and added it to the guest as described, started the domain and issued "boot vdisk_iso:f -v" - this seemed to work well, but there was an error that turned out to be that I had given the wrong path for the system disk.
So I started over - removed the guest domain and the disk definitions for both guest and control domain, and removed the guest; then recreated everything. This time, when I "boot vdisk_iso:f -v" I get:
The file just loaded does not appear to be executable.
Any idea what may have happened? It makes no sense to me; not unless the iso file has been corrupted, but it doesn't seem to have been modified, and I can mount it as a loop-back fs in linux.I have the same problem with a Netra T1 system. Solaris 10 installed fine and it won't boot. It did have Solaris 8 on the system, but I put in new drives to start my Solaris 10 install.
I tried booting to single user cd-rom (ok boot cdrom -s) and ran this:
# installboot /usr/platform/SUNW,UltraAX-i2/lib/fs/ufs/bookblk /dev/rdsk/c1t0d0s1
(SUNW,UltraAX-i2 was derived from # uname -i)
It didn't help.
I also tried "setenv diag-switch? false" at the okay prompt. It didn't help
Any thoughts?
Maybe you are looking for
-
Not possible to get rid of Welcome Screen
In 309 we wish to get rid of the Welcome Screen and go straight to the login screen. In 307 we did this by making the Welcome Screen not accessible to public users. If we try doing that in 309 the Sign On Screen comes up fine, but once the user has l
-
If i enter in a manual customer invoice (FB70), can i get a PC on the cusotomer line item in BSEG ie CR customer DR revenue account I see the PC on the revenue line item, but is there anyway to get the PC on the customer line item? Cheers, James
-
SharePoint 2013 - On Premise App model Configuration
Hi, configuring App Service on-Premise SharePoint 2013. difficulty in AppDomain-which I am deploying both Certificates on same server VM - but the urls are not working even for the original websites. I having two wild Card certificates. 1st-which is
-
Unmanaged switch connect to 2 cisco 2960's that are trunked together
Hopefully everyone understands this. say I have 2- 2960's that are connected to each other with a trunk, for DR purposes. Now someone wants to connect a unmanaged smaller switch and plug it into both 2960's to provide network access to both 2960's in
-
Hi, I'd like to know the path and exactly which files to restore using Time Machine to; 1) Recall all of my Bookmarks that were in my Firefox browser. And 2) which additional file to restore, which will have my website user & passwords?