UDS compatibility

Hello all,
I am wondering if someone can help us out with the following question:
Background:
We are implementing/moving to Oracle 9i, with Solaris 8 or Solaris 9 and Unified Development Server - UDS 5.2.
From a upgrade path of Solaris 2.6, Oracle 8.1.7.2, Forte 4GL 3.5 "N".
With Forte 4GL 3.5 "N", we currently use 3 forte components, in conjunction with the runtime
client.
FORTE.VER = DEV3.0.N.1
FORTE -- EXPRESS.VER = EXP2.0.N.1
FORTE Web Enterprise -- WEB.VER = WEB1.0.G.2
Question:
According to the compatibility matrix for UDS 5.2. Please confirm, is Oracle 9.2 compatible or certified with Solaris 9. It indicates compatibility for Solaris 9 with Oracle 10, but we desire to use Solaris 9 with Oracle 9.2.0.6. Or as indicated is Oracle 9.2 only certified or compatible with Solaris 8? If we did upgrade to Solaris 9, would we have to use Oracle 10 to be supported.

The compatibility matrix states that UDS 5.2 has only been tested for Solaris 9 and Oracle 10.1.0.2.0. And given the past experience, they will only support that combination. If you chose to run Solaris 9 and Oracle 9 then you are on your own. It most likely will work but they have not certified it and therefore will give push back if you run into problems. It�s a small risk to take but I think it will be safe to go for it. We were running on Solaris 9 and Oracle 9 for some time with out any problems. But you might have problems with special features in Oracle like OPS, etc. Make sure you test everything first before switching.
ka

Similar Messages

SUN One UDs over Windows 2008

Hello i'm not a Sun ONE expert. Our development department trying to use SUN ONE UDS in Windows 2008. All works fine but before 30 min we get this errors:
SYSTEM ERROR: Could not create object as in-process server using CLSID
"{E3A8F4D6-AA68-4729-9DFA-92FAC64E5906}"
Class: OLEException with ReasonCode: OLE_ER_RESOURCE
Last TOOL statement: method CUnknown.CreateUsingCLSID
Error Time: Tue Feb 24 13:03:43
Exception occurred (remotely) on partition "IBPALCXS_cl165_Part1",
(partitionId = 4AFCD160-E163-11DD-8EAE-16E6FA7DAA77:0x1d1c:0x1, taskId
= [4AFCD160-E163-11DD-8EAE-16E6FA7DAA77:0x1ceb.194]) in application
"IBPALCXS_cl165", pid 8632 on node SVAPL01-05 in environment apl01-05.
Somebody knows something about windows 2008 compatibility? our Forte environment works fine in Windows 2003 servers. Thanks a lot
Edited by: Miquelangeld on Feb 24, 2009 4:07 AM

Finally we found the problem!!.
With Process Monitor (Thanks to the greath Mark Russinovich) we monitored ftexec process and when we get the errors the ftexec ends with code 0xC0000425 that mean STATUS_HIVE_UNLOADED
Windows 2008 have a new built-in feature named UPHClean used to clean-up user information in registry when user logoff, but for some reason windows clean the complete user hive in HKU. We disabled this feature and now works ok :-)
Thanks a lot for your help. really, thanks

Jabber UDS COP file

I have CUCM 9.1.2 and JFW 9.7, UDS works fine JFW UDS settings are configured via jabber-config.xml.
Why this file is needed? cmterm-cucm-uds-912-5.cop.sgn
Documentation states is required.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_0111.html#CJAB_CN_CCE86AFC_00

The COP file is required to get the best performance for UDS with Jabber, particularly when a large number of Jabber clients are logging in at the same time.
Your experience without the COP file may vary depending on the way that your Jabber deployment is configured, the average number of contacts that each user has, and other factors, including the exact build of Jabber, but installing the COP file is strongly recommended to prevent issues with extremely high load during Jabber login.
Additionally, the homeCluster FQDN changes (CSCul15900) resolve a very annoying issue with SSL certificate prompts.
There are more details in the release notes for the COP file with regard to the specific performance and compatibility fixes that are included in this COP file: http://www.cisco.com/web/software/282204704/18582/cmterm-cucm-uds-912.pdf

App compatibility problems after installing Yosemite 10.10.3?

I just installed the latest version of Yosemite (10.10.3) on my 27inch iMac (from 2012/13). 16GB RAM, 3 TB drive,NVIDIA GeForce GTX 675MX 1024MB.
Since then, I get the spinning beach ball of death and apps just hang (iTunes, Safari) every few minutes and then restart a few seconds later (it happened when Iwas typing this note for example). Feels like app compatibility or permissions problems. I tried the disk utility app to verify and repair disk. Says everything's fine. Switched off wifi to see if it was anything from outside. Still happens.
The only thing that has changed recently has been the MacOS update.
Any hints?

And the next few seconds if you need it.
23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x9000
23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
23/04/2015 10:13:12.075 configd[48]: preference: no sharing preferences
23/04/2015 10:13:12.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
23/04/2015 10:13:12.000 kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x9780 -- 0x9800 -- 0x9000 ****
23/04/2015 10:13:12.000 kernel[0]: Previous shutdown cause: 5
23/04/2015 10:13:12.000 kernel[0]: DSMOS has arrived
23/04/2015 10:13:12.185 hidd[94]: IOHIDService compatibility thread running at priority 63 and schedule 2.
23/04/2015 10:13:12.197 com.apple.SecurityServer[76]: Entering service
23/04/2015 10:13:12.255 kdc[138]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
23/04/2015 10:13:12.000 kernel[0]: PPGTT is enabled
23/04/2015 10:13:12.267 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.system) Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient
23/04/2015 10:13:12.278 systemkeychain[157]: done file: /var/run/systemkeychaincheck.done
23/04/2015 10:13:12.355 UserEventAgent[40]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
23/04/2015 10:13:12.361 loginwindow[90]: Login Window Application Started
23/04/2015 10:13:12.363 digest-service[125]: label: default
23/04/2015 10:13:12.363 digest-service[125]: dbname: od:/Local/Default
23/04/2015 10:13:12.363 digest-service[125]: mkey_file: /var/db/krb5kdc/m-key
23/04/2015 10:13:12.363 digest-service[125]: acl_file: /var/db/krb5kdc/kadmind.acl
23/04/2015 10:13:12.365 digest-service[125]: digest-request: uid=0
23/04/2015 10:13:12.394 digest-service[125]: digest-request: netr probe 0
23/04/2015 10:13:12.395 UserEventAgent[40]: Captive: CNPluginHandler en1: Inactive
23/04/2015 10:13:12.395 digest-service[125]: digest-request: init request
23/04/2015 10:13:12.401 digest-service[125]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
23/04/2015 10:13:12.510 com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
23/04/2015 10:13:12.000 kernel[0]: pci pause: SDXC
23/04/2015 10:13:13.604 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
23/04/2015 10:13:13.826 configd[48]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en0) failed: Network is down (50)
23/04/2015 10:13:13.826 configd[48]: DHCP en0: INIT transmit failed
23/04/2015 10:13:13.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
23/04/2015 10:13:13.000 kernel[0]: en1: channel changed to 1
23/04/2015 10:13:13.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 94 dlt 163
23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 30 dlt 105
23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 52 dlt 127
23/04/2015 10:13:13.000 kernel[0]: bpfAttach len 38 dlt 192
23/04/2015 10:13:14.485 locationd[78]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
23/04/2015 10:13:14.487 locationd[78]: NBB-Could not get UDID for stable refill timing, falling back on random
23/04/2015 10:13:14.537 thermald[45]: Waiting for OSTT support notification
23/04/2015 10:13:14.683 locationd[78]: Location icon should now be in state 'Inactive'
23/04/2015 10:13:14.693 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
23/04/2015 10:13:15.534 secinitd[173]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
23/04/2015 10:13:15.534 secinitd[173]: ctkd[171]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd
23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.lakitu) The JoinExistingSession key is only available to Application services.
23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.accounts.dom) The _DirtyJetsamMemoryLimit key is not available on this platform.
23/04/2015 10:13:15.737 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
23/04/2015 10:13:15.748 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
23/04/2015 10:13:16.817 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
23/04/2015 10:13:17.138 configd[48]: dhcp_arp_router: en1 SSID unavailable
23/04/2015 10:13:17.840 mdmclient[64]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
23/04/2015 10:13:18.098 apsd[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
23/04/2015 10:13:18.126 apsd[73]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
23/04/2015 10:13:18.127 apsd[73]: Attempt to set push wake topics without dark wake enabled: ()
23/04/2015 10:13:18.127 apsd[73]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
23/04/2015 10:13:18.128 apsd[73]: <APSConnectionServer: 0x7fc019f2bfa0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps
23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
23/04/2015 10:13:19.227 discoveryd[72]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
23/04/2015 10:13:19.228 discoveryd[72]: Basic SleepProxy BSP Server Disabled. Metric = 3373
23/04/2015 10:13:19.231 discoveryd[72]: AwdlD2d AwdlD2dInitialize: Initialized
23/04/2015 10:13:19.232 discoveryd[72]: D2D_IPC: Loaded
23/04/2015 10:13:19.237 discoveryd[72]: Basic WABServer NetResolverEvent no resolvers, resetting domains
23/04/2015 10:13:19.237 discoveryd[72]: Basic DNSResolver etc/hosts file changed: Event 0x7fa4a1d01560 Flushed /etc/hosts cache
23/04/2015 10:13:19.237 discoveryd[72]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
23/04/2015 10:13:19.238 discoveryd[72]: Basic SleepProxy Could not get the primary interface
23/04/2015 10:13:19.238 discoveryd[72]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
23/04/2015 10:13:19.238 discoveryd[72]: Basic SleepProxy Sleep Proxy Server is not enabled
23/04/2015 10:13:19.239 discoveryd_helper[191]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
23/04/2015 10:13:19.239 discoveryd_helper[191]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7faa82f005d0: start (pid=72, <unknown> not root)
23/04/2015 10:13:19.256 networkd[192]: networkd-412.20.3 pid 192
23/04/2015 10:13:19.288 kdc[138]: KDC started
23/04/2015 10:13:19.788 WindowServer[172]: Server is starting up
23/04/2015 10:13:19.789 mds[55]: (FMW.Normal:1428) FMW 0 0
23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.084989: createVirtIf(): ifRole = 1
23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <p2p0> role 1
23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <p2p> role 1
23/04/2015 10:13:19.000 kernel[0]: setVIRTUAL_IF_CREATE: AWDL interface role (4)
23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.099462: createVirtIf(): ifRole = 1
23/04/2015 10:13:19.000 kernel[0]: ARPT: 38.099472: Create AWDL virtif(AWDL): unit = 2, ifRole = 4
23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <awdl0> role 4
23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::attachToBpf name <awdl0> role 4 successful attach to bpf type 147
23/04/2015 10:13:19.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <awdl> role 4
23/04/2015 10:13:19.895 airportd[52]: airportdProcessDLILEvent: en1 attached (up)
23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode enable succeeded
23/04/2015 10:13:19.000 kernel[0]: AirPort: Link Up on awdl0
23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::configure Dynamic country code not supported on this device
23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::getVHtCapabilityIE Unable to get vht capabilities ret 2d
23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode disable succeeded
23/04/2015 10:13:19.000 kernel[0]: awdl0: promiscuous mode enable succeeded
23/04/2015 10:13:19.000 kernel[0]: en1: channel changed to 1
23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from AUTO to SUSPENDED
23/04/2015 10:13:19.000 kernel[0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() Suspending AWDL, enterQuietMode(true)
23/04/2015 10:13:20.023 UserEventAgent[40]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service
23/04/2015 10:13:20.000 kernel[0]: en1: 802.11d country code set to 'GB'.
23/04/2015 10:13:20.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
23/04/2015 10:13:20.069 lsregister[195]: LaunchServices: Begin database seeding
23/04/2015 10:13:20.069 lsregister[195]: LaunchServices: Completed database seeding
23/04/2015 10:13:20.000 kernel[0]: en1: 802.11d country code set to 'X3'.
23/04/2015 10:13:20.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
23/04/2015 10:13:20.000 kernel[0]: ARPT: 38.349180: MacAuthEvent en1 Auth result for: 74:44:01:f3:8b:c4 MAC AUTH succeeded
23/04/2015 10:13:20.000 kernel[0]: AirPort: Link Up on en1
23/04/2015 10:13:20.000 kernel[0]: en1: BSSID changed to 74:44:01:f3:8b:c4
23/04/2015 10:13:20.000 kernel[0]: en1: channel changed to 6
23/04/2015 10:13:20.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
23/04/2015 10:13:20.000 kernel[0]: ARPT: 38.364370: AWDL Sync Enabled 0
23/04/2015 10:13:20.165 configd[48]: setting hostname to "stan-woodss-imac.local"
23/04/2015 10:13:20.169 configd[48]: network changed.
23/04/2015 10:13:20.000 kernel[0]: AirPort: RSN handshake complete on en1
23/04/2015 10:13:20.185 com.avast.daemon[149]: Starting daemon.
23/04/2015 10:13:20.000 kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
23/04/2015 10:13:20.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice11a2
23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendPStates - Success!
23/04/2015 10:13:20.364 locationd[213]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
23/04/2015 10:13:20.429 locationd[213]: NBB-Could not get UDID for stable refill timing, falling back on random
23/04/2015 10:13:20.000 kernel[0]: X86PlatformShim::sendStepper - Done!
23/04/2015 10:13:20.555 WindowServer[172]: Session 257 retained (2 references)
23/04/2015 10:13:20.556 WindowServer[172]: Session 257 released (1 references)
23/04/2015 10:13:20.000 kernel[0]: en2: promiscuous mode enable succeeded
23/04/2015 10:13:20.000 kernel[0]: en3: promiscuous mode enable succeeded
23/04/2015 10:13:20.567 WindowServer[172]: Session 257 retained (2 references)
23/04/2015 10:13:20.569 WindowServer[172]: init_page_flip: page flip mode is on
23/04/2015 10:13:21.092 WindowServer[172]: Found 34 modes for display 0x00000000 [34, 0]
23/04/2015 10:13:21.096 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
23/04/2015 10:13:21.098 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
23/04/2015 10:13:21.099 WindowServer[172]: mux_initialize: Couldn't find any matches
23/04/2015 10:13:21.103 WindowServer[172]: Found 34 modes for display 0x00000000 [34, 0]
23/04/2015 10:13:21.106 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
23/04/2015 10:13:21.106 WindowServer[172]: Found 1 modes for display 0x00000000 [1, 0]
23/04/2015 10:13:21.206 WindowServer[172]: WSMachineUsesNewStyleMirroring: true
23/04/2015 10:13:21.207 WindowServer[172]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 34 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x1cbf8fef38ae9dfec93508341d780c47
23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
23/04/2015 10:13:21.207 WindowServer[172]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, e

I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount in diskpart to allow windows to assign a drive name.
From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
not think I have solved the problem. Intel or Windows... I think a bit of both.
If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date.
I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
libraries and forums and have done everything I can find as suggestions.
I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
Basically, I am experiencing a lack of swap space after my hard drive unmounts.
Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Itunes wont open - compatibility error...

hi,
today I had a problem with moving songs from itunes to ipod. have had this issue in the past which was fixed by using ipod updater.
this didnt seem to work so for first time in ages ran the itunes updater. I can no longer open itunes and get the following error.
Quicktime unavailable
itunes requires Windows 2000 or later
Please make sure compatibility mode is disbaled in the compatibility tab of the properties of itunes.exe
well....I tried to do this (I am not massively IT literate!), have tried selecting or deselecting compatibility on this tab....and still wont open....any ideas?
im on windows XP professional.
cheers in advance
mike

hiya!
if I find the mp3 file on my hardrive and move it to ipod manually it still doesnt appear when I disconnect.
that's normal. for the ipod to recognise a song it needs to be transferred to the ipod via itunes rather than dragged and dropped with Windows Explorer. see the note at the end of this article:
iPod: Operating System or iTunes Reports the Disk is Full, But It Does Not Look Full
... try resetting the warnings on your ipod and trying another manual sync:
Resetting iPod warnings
do you get an error message show up after resetting warnings?
love, b

Is there a Data Execution Prevention compatable version of iTunes? I have reinstalled iTunes 10.5 at least 10 times, and after it installs, it will not open because of DEP.

I have tried all the advice I have seen on Apple Support discussion boards for the past 2 days, and nothing works. Disabling DEP is not possible, regardless of what the Windows Support discussions tell you. In the meantime, I have absolutely no access to iTunes, or even the ability to update my iPhone or iPod. The only feasable solution is the possibility of a version of iTunes that is compatable with Data Execution Prevention settings.
In the past 2 days, I have: Removed iTunes and related components from the Control Panel (numerous times) Per the instructions on Apple Service discussions pages, I did it in this order. 1. iTunes 2. QuickTime 3. Apple Software Update 4. Apple Mobile Device Support 5. Bonjour ^. Apple Application Support. After all that, I reinstalled iTunes.
Everything looks fine during installation, with no error messages. At the end, it says everything was successfully installed. However, when the installation tool closes, iTunes will only partially open a window, but will stay blank. Then I get the message that iTunes has stopped working and that Windows has shut it down. Then I get notified that DEP has caused iTunes to shut down.
Can someone please help? Or, is there a DEP compatible version of iTunes?
I would appreciate any help. Thanks!!

Polydorus,
Thank you for your kind reply. During the many times I uninstalled iTunes, and all the other Apple programs, I only used the Uninstall Programs in Windows Control Panel. To make a long story short, I found a solution that works for me, but it is still not a complete soluton.
Here is what I did:
I used Uninstall Program in the Windows Control Panel to uninstall everything IN THIS ORDER
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support
Then I went to C:\Program Files and looked for any iTunes or Apple program listed there and deleted it.
I have 64-bit, so I then went to C:\Program files (x86) and looked for any iTunes, QuickTime, Bonjour or any other file or folder that had Apple or any Apple program in the name and deleted it.
I went to C:\Windows|SysWOW64\Quicktime and C:\Windows\SysWOW64\QuicktimeVR and deleted them
Go back to START, and open the "C" drive. Open the USERS folder. Open the folder with your username. Open the AppData folder. Then double-click on the LOCAL folder to open it. If you see any files or folders there that show any Apple program or file, delete those files or folders. Then go to the REMOTE folder and do the same. If there are any other users on this computer, go to each individual user and do the same thing in each LOCAL and REMOTE folder. Restart your computer.
Go to http://www.apple.com/itunes/download/ This is the page where you will actually download iTunes. Scroll down the page to the section under "Windows Software" that says "64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer". Click on that line to get the installer. It will take you to another download window.
Scroll to the bottom of the page to the message that says "Download for iTunes 10.4.1 for Windows (64-bit) here: iTunes for Windows 64-bit." Click there to get the download.
This is not iTunes 10.5, so you will not have access to "The Cloud", but it is at least functional until Apple actually comes out with a version that will not activate the DEP message. There was no combination of uninstalling and reinstalling, with or without Quicktime, with 10.5 that did not cause problems with Data Execution Prevention problems that I found.
I also used Firefox for the downloading instead of Internet Explorer. It just seemed to function better that way.
I hope this is helpful to someone. It's just what worked for me.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I am trying to find "compatibility view settings" in order to add a website that I need to use for work. PLEASE HELP!

I received a "how to" sheet of how to be able to view this website but it wants me to download Internet Explorer (excuse me while i say yuck!)...
So the directions state: Under "Tools" click on "compatibility view settings". Where is says "add this website" write in the website and then click add and close. Log off and reboot.
I live on Mozilla on all my devices. I recommend it to anyone who has not been introduced yet. I cringe to think of being forced to use internet explorer!!!
Thank you for all you do!!!

hello ETRU, "compatibility view" is a concept of internet explorer that other browsers do not have. do you have any particular problem viewing it with firefox?

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

I have PhotoDhop Elements 4.0, which I have been running on an XP computer. I bought a Windows 8.1 computer, and tried to reinstall it on the new machine. It would not install, due to "compatibility" problems. Is there a fix that will let me install this

I am trying to determine whether there is a way to install my PhotoShop Elements 4.0 on a Windows 8.1 computer.

If there is it probably requires doing so in compatibility mode. Try searching Google to see if anyone has looked into this for Windows 8 or even an earlier version since it likely a question for earlier Windows versions as well.

CVP 7.0.2 compatibility with ICM 8.5 or 9.0

Is there any official documentation on the compatibility of CVP 7.0.2 with newer versions of ICM?
I am interested in knowing, if anyone ever successfully connected a CVP 7.0.2 Call server with ICM PG 8.5 or 9.0.

This is definitely not supported. I believe there will be issues with the communication between PIM and CVP.
Take a look at the below pages.
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x)
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_9.0(x)
However ICM 7.5.10 does support CVP 8.x very well.
-Sunil

Facebook video chat compatibility in window 8.1

Please note that I can't able to find facebook video chat icon in window 8.1 operating system. Same has been available in window 7 and lover version. Please note that I was use same logging and I found this mismatch. Request you to please provide solution
for use facebook video chat in window 8.1.
Thanks,
Ankur Patel

You are not getting facebook video chat icon as it's not compatible.
Ref:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Facebook%20Video%20Calling&vendor=Facebook&ModelOrVersion=1&Type=Software&tempOsid=Windows+8.1
To resolve this issueYou may refer to the article to add check in compatibility view settings.
Fix site display problems with Compatibility View
S.Sengupta, Windows Entertainment and Connected Home MVP

UDS compatibility

Similar Messages

Maybe you are looking for