UGR and MOL parameters

Hi,
What is the purpose of setting the User Parameters UGR (User Group) and MOL (Personnel Country Groupings)? What's their importance?
Help appreciated.

User Group
Have a look at transaction - SUGR.Purpose for example is to give certain system admin rights to unlock / change password only to a given user group. You assign user group to an user id via SU01.
The main reason of user groups is to categorize user into a common denominator.
Two types of User Groups.
1.general user groups
2.authorization user group
The general user group can be used in conjunction with SUIM and SU10, to select all the users in a specific group. User can only be member of one authorization user group but several general user group.
The authorization user group is used in conjunction with S_USER_GROUP authorization object. It allows to create security management authorization by user group. e.g. you can have a local security administrator only able to manage users in his groups, Help-Desk to reset password for all users except users in group SUPER, etc.
One of the Primary uses of user groups is to sort users into logical groups.
This allows users to be categorised in a method that is not dependent on roles/AG's/Responsibilities/Profiles etc.
User Groups also allow segregation of user maintenance, this is especially useful in a large organisation as you can control who your user admin team can maintain - an example would be giving a team leader the authority to change passwords for users in their team.
The most important factor identified is that the lack of user groups is an indication that there may be problems with the user build process. This is very "fuzzy" but is a bit of a warning flag.
Personnel Country Grouping
MOL defines you default country.This is most imp concept for an employee.say,When Hiring,You have to do set this Mol in the user profile.When you set the default country,all transactions and default settings applicable to that country will be available for you.
You do the settings in cutomizing table as per the country grouping. Eg.T500P( Pers.area) ,T510( Pay Scale Groups)
Regards,
Manoj.

Similar Messages

How to open a page from a Form and pass parameters to the form on that page

I found a similar example on this forum, but it did not work for me:
declare
l_names owa.vc_arr;
l_values owa.vc_arr;
i number;
begin
PORTAL.wwpro_api_parameters.retrieve(l_names, l_values);
FOR i in 1..l_names.count
LOOP
htp.p(l_names(i) || ' ' || l_values(i));
END LOOP;
end;
By using this method i get the parameters for the Form, like the session ID, but not the parameters for the Page that the form is displayed in.
Another method I tried:
To open a Form from a Form and pass parameters works fine like this:
--In the After processing page PL/SQL event.
declare
v_id number;
blk varchar2(10):='DEFAULT';
Begin
v_id:=p_session.get_value_as_number (p_block_name=>blk,p_attribute_name=>'A_ID');
if v_id > 0 then
htp.formOpen('PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=2649500412&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=ID&p_arg_values='||to_char(v_id),'post');
htp.formSubmit(NULL,'Upload Files');
htp.formClose;
end if;
End;
But I want to open a Page containing the Form instead of just opening the Form. Is this possible to open a Page and pass paramters to the page, and then let the form inside the Page access the passed paramters. The reason for this is that a Form cannot be based on a page template, or can it? When opening the form i want to keep the left menu, which I can if it is a page based on my template with the left menu.
Best regards
Halvor

Hi,
You can do this by calling the url of the page with the form. You can then use p_arg_names and p_arg_values to pass parameters. In the called form you can get the value from p_arg_names and p_arg_values and assign it to the form field.
You can call this code in the success procedure of the calling form.
declare
v_id number;
blk varchar2(10):='DEFAULT';
v_url varchar2(2000);
Begin
v_id:=p_session.get_value_as_number (p_block_name=>blk,p_attribute_name=>'A_ID');
v_url := <page_url>;
if v_id > 0 then
call(v_url||'&p_arg_names=id&p_arg_values='||v_id);
end if;
End;
In the called form in "Before displaying form" plsql section write this code.
for i in 1..p_arg_names.count loop
if p_arg_names(i) = 'id' then
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_ID',
p_value => p_arg_values(i)
end if;
end loop;
This code picks up the value from p_arg_values and assigns it to the form field.
Hope that helps.
Thanks,
Sharmila

Exporting and importing parameters

Hi,
Can any one explain how the exporting and imopting parameters work in case of function call.
for example in the folowing code:
CALL FUNCTION DOWNLOAD
     EXPORTING
          FILENAME     = <default file name>
          FILETYPE     = <default file type>
          MODE          = <create new or extend>
     IMPORTING
          FILESIZE     = <size of file in bytes>
     TABLES
          DATA_TAB     = <internal table to transfer>
     EXCEPTIONS. . . .
Do we have to specify the importin parameters also in the program, and if yes what is the use of specifying them.
Thanks,
Dhiraj

You need to fill only export parameter and tables parameter
CALL FUNCTION DOWNLOAD
EXPORTING
FILENAME = <default file name> -> specify local file name
FILETYPE = <default file type> 'ASC'
MODE = <create new or extend> comment mode
IMPORTING -> comment import parameters
FILESIZE = <size of file in bytes> comment
TABLES
DATA_TAB = <internal table to transfer> -> give internal table
EXCEPTIONS. . . . uncomment all exceptions
this FM will download the data from internal table data to local file as like.txt or .xls
Thanks
Seshu

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Mail Adapter - Dynamically maintaining To and From Parameters

Hi all,
I am using the mail adapter as receiver in my scenario where i need to set up the TO and FROM parameters dynamically in the adapter configuration. Can any body please suggest how to do that?
Thanks
-Kulwant

Kulwant,
Did you gone thru this link?
http://help.sap.com/saphelp_nw70/helpdata/EN/6b/4493404f673028e10000000a1550b0/content.htm
use the below code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/Mail","THeaderTO");
String to_add = "[email protected]"
conf.set(key, to_add);
return "";
raj.
Edited by: Raj on Oct 29, 2008 3:55 PM

Difference between Import and Export parameters in Function Module

Hi All,
I am unclear about the import and export parameters, when i create a function module. Can anyone explain abt this. However when i call the function module in any program the import parameters in Function module are displayed as exporting in program amd the export parameters as importing.
Any help on this would be appericiated.
Shejal.

HI,
Import parameter in FM is the value u provide to FM for processing.
export is the value u get from FM after processing.
when u call a FM in a progam the import parameter will appear as Export bcos u r giving value to the FM.
and u r getting value from FM in import parameter(bcos u r importing).
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Import and export parameters of an FM are passed by value---why?

Q] By default the import and export parameters of an FM are passed by value---what is the advantage of this system?

Hi,
Import and export parameters are, by default, passed by value. However, they can also be passed by reference. Tables parameters can only be passed by reference.
Pass by reference means, passing the address itself rather than passing the value.
I guess passing by value is easier and advantageous

Increase the SGA_MAX_SIZE and SGA_TARGET parameters

HI ,
I am using oracle 10g R2 and windows server 2003 .
My server is having 8 GB RAM .
I want to increase the SGA_MAX_SIZE and SGA_TARGET parameters .
I am using the below command , but getting the error
SQL> alter system set sga_max_size=2000M scope=spfile ;
alter system set sga_max_size=2000M scope=spfile
ERROR at line 1:
ORA-32001: write to SPFILE requested but no SPFILE specified at startup
Can someone please help ..

hi
connect as sys user and then try...
first make folder as backup and then copy the old SPFILEorcl to the same folder(backup)
now you can easily modify the files otherwise you will get error..
you will find here..
C:\ORACLE_HOME\database
SQL> alter system set sga_max_size=2000M scope=spfile ;
System altered.OR.
connect as sys user.
and do the following...
1).SQL>create pfile from spfile;
2).modify the pfile and decrease\increase the size of pools.
3).shutdown database.
4). Startup database using created pfile.
if it start ok then.
5.) Recreate the Spfile with the created Pfile.
SQL>create spfile from pfile;sarah

TO_NUMBER and NLS parameters......don't understand

I am trying to get my head around the use of format elements and NLS parameters with TO_NUMBER and TBH am at my wits end. So I'm going to start with something simple. I've never bothered or had to bother with the third parameter 'nls params' for NLS settings and now that I have I really regret it.
This works even though the '.' and ',' characters are not in their normal positions....
SQL> SELECT TO_NUMBER( '17.000,23', '999G999D99', 'nls_numeric_characters='',.'' ') FROM DUAL;
TO_NUMBER('17.000,23','999G999D99','NLS_NUMERIC_CHARACTERS='',.''')
17000.2
So why is this version throwing up an error? (I should say all I've changed is the order of ',' and '.' in the string)
SQL> SELECT TO_NUMBER( '17,000.23', '999G999D99', 'nls_numeric_characters='',.'' ') FROM DUAL;
SELECT TO_NUMBER( '17,000.23', '999G999D99', 'nls_numeric_characters='',.'' ') FROM DUAL
ERROR at line 1:
ORA-01722: invalid number
Also does the order of characters matter here 'nls_numeric_characters='',.'' ') ?
I apologise but when marking code in my spl*plus CLI and trying to paste here as 'SQL insert' lines ended up missing or wrapping or line spacing changing seconds later. I ended up with one line written over the other and the missing lines only being visible when highlighted!!!

Also does the order of characters matter here 'nls_numeric_characters='',.'' ') ?
Of course the order is important. How would you tell the meaning of each character if it wasn't?
First character is the decimal separator, and the second is the thousand separator.
Your first query is OK because the decimal separator used in the input string is '.' and the thousand separator is ',', which matches exactly the characters specified in the NLS parameter.
The second query failed for the opposite reason.

Ozonic and control parameters ?

i need help setting up my ozonic and logic.
it read's the automation conrtols they comthey come into the enviroment. but it wont let me assig to controls on synths etc.
thanks in advance

Hi, you need to open the synth you want to control, select the learn mode in the preferences of the command assign menu. Then select the control you want to assign, the parameter appears in the learn menu. Rotate the knob or pull the slider on the ozonic and the parameters will appear for that control.Will be saved on close. Do that for every controller and save the settings in the Ozonic with the Enigma Software as a new preset. I try to assign the transport controls of the ozonic to logic transport. Any ideas how that works ? Cheers,
Niels
PowerBook G4 1,67 Mac OS X (10.3.9)

Xms and Xmx parameters

Hi, on a windows machine with jdk1.3 I start oracle's oc4j(standalone) from commandline. I specify Xms and Xmx parameters. Hence;
java -Xms512M -Xmx512M -jar oc4j.jar
is the command line command.
But after I start the app server, when I look at the Window's task manager the java. exe has about 50M memory usage. Is there something wrong???
Thanks all.

The best option is to set it in setDomain.cmd/sh OR comEnv.cmd/sh depending on your WLS version, since even if you are starting your manage servers from commandline rather than using nodemanager, it will internally use this to set the environment.
However if you are using nodemanager, you might try "server start" tab for passing JVM arguments.
For windows service try the following link:
http://e-docs.bea.com/wls/docs103/server_start/winservice.html#wp1186212 ----> its for WLS10.3

Output control and outbound parameters

Can you please help me locate the output control and outbound parameters...
thank you in advance...

Hi Pabito,
I am assuming that you need to send an outgoing EDI - Mail or fax to a specific partner. This process is possbile if you could set up the output control for sales documents.
spro->sales & distribution -> BF -> Output control-> output determination -> maintain output determination for sales documents -> Assign output types to partner function.
Make sure that an output determination procedure is assigned to the sales dco type.
Also Maintain condition records for the output type and the transmission medium(EDI) using the trx NACE.
I hope this is what you are looking for, i also have a faint notion that you might be lookin how to setup an edi connection with the partner.!!!
If my notion is right do ping back to know more abt that,If you find this piece of information do take some time to award points to mee
- Girish

ADF: How to print query and query parameters passed in the executeQueryForCollection methof of VO impl class.

Hi,
Kindly let me know how to print the query and the parameters passed to it? I tried with the params parameter in super.executeQueryForCollection(qc, params, noUserParams); but could not succeed.
I need to log the query and the params passed to it. Kindly help.
Thanks in advance,
Kalpana.

Here you go
Coding With Passion: Oracle ADF - Debug view object query with parameters

Actual Benefits of final methods and final parameters

I know that a lot of this depends on the JVM and the actual code, but I was wondering what the actual real world advantage was of using final methods and final parameters.
I use a business and data layer for my program to interact with the database. So all of the methods in these classes are public and static. I was just wondering if it would be benefical to make all of these methods final and all of the parameters final also. I won't ever be making subclasses of these classes, so is this worth doing?
Thanks,
Dave Johansen

On the point of final, this should always be a design decision. That is, does it make sense to allow your class to be overridden? Making classes and/or methods final is a big barrier to future enhancements and extendability - so only make soemthing final if you haver a specific reason for doing so.
Any performance issues should not take a high precedence in this decision - and in any case the difference in making something final will be non-existant for all practical purposes.
How about volatile?
I get the meaning of synchronized but
volatile?Volatile is a keyword that tells the JVM it can't optimize / inline serctions of code that use certain variables. You may not realise it, but the JVM takes your bytecode and chops them up and re-arranges them at runtime, to boost performance. This can sometimes have dangerous consequences in a mutlithreaded environment, so by adding the volatile keyword you are saying to the JVM (or specifically HotSpot) not to perform any "code magic".
Here's a simple example:
public class TestClass {
    private boolean check = false;
    public void setTrue(){
        check = true;
    public void check(){
        check = false;
        if(check){
            System.out.println("Will this ever print?");
}Obviously the string will never print in a single threaded environment. However, in a multithreaded environment, is is possible that a thread could call setTrue() between another thread setting the value to false and performing the if() check. The point is that due to runtime optimization, Hotspot may realise that check is always false, so completely remove the code section with the if block. so regardless of the value of the boolean, the code may never be entered.
One solution is to declare the boolean check as volatile. This tells the JVM that such optimizations are not allowed and then it is entirely possible for the string to be printed.
One curiousity, off-topic:
is there a way for jvms instantiations to see each
other?Have you looked into RMI?

The importance of input parameters and output parameters

hi all.
kindly suggest me the importance of output and input parameters in smart forms.

HI,
INPUT parameter----
> the varibales which already defined and defined and holds the data.
OUTPUR parameter----
> the variables which are not holding the values before executing the flow logic
                                                      after executing flowlogic these will hold the values.
Eg:
in flow logic:
input para                                             output para
gv_val                                                    gv_val1.
code:
gv_val1 = gv_val + 1
reward me if it is useful.
thanks
AM

UGR and MOL parameters

Similar Messages

Maybe you are looking for