UIButton tag not available in controller code

Hi, I have UIButton defined in InterfaceBuild. I assigned Tag (integer?) to the button. It has a IBOutlet in my controller code. But my controller can not retrieve the tag value by using:
int tag = mybutton.tag;
It is always 0 no matter what I set in Interface Builder.
Why?

I am new to interface builder and I'm not sure how to give each button a separate unique tag in interface builder. I can figure out how to access them in code once there set. This is probably something really simple that I'm missing.

Similar Messages

PO No. Not Available in T-Code VL06F (List Of outbound deliveries)

Hi Team,
I was checking list of outbound deliveries in T-Code VL06F (List Of outbound deliveries) here.
1. PO no. coming as Sales order no. only so how to bring PO no. from sales order to delivery please Guide.
please find attached doc. here.
2. What are the settings required for this
Thanks
YRHSP

Hi SP,
System will populate Purchase document value either as Sales order number (VBAP-VBELN) or Purchase order number (EKPO-EBELN)
This is standard code put
there is no configuration for this
you have to make code changes specific to your requirement
There is an enhancement point where you can try
FELDAUSWAHL_SONDERREGELN_05 SPOTS ES_SAPMV50A
check with your developer on feasibility of this enhancement
thanks
santosh

WD demo application: "Service not available" although service active

Hi everyone
I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
Any suggestions? Thanks!

Hello Jan,
we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
Best Regards
Roman Weise

Jolz: uses a CPU feature which is not available?

First lines from m000 trace after the header:
*** 2009-03-30 16:34:30.780
*** SESSION ID:(1565.8) 2009-03-30 16:34:30.780
*** CLIENT ID:() 2009-03-30 16:34:30.780
*** SERVICE NAME:(SYS$BACKGROUND) 2009-03-30 16:34:30.780
*** MODULE NAME:(MMON_SLAVE) 2009-03-30 16:34:30.780
*** ACTION NAME:(JAVAVM JIT slave action) 2009-03-30 16:34:30.780
jolz: Compiled code for java/util/HashMap.<init>; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap.resize; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap.unmaskNull; uses a CPU feature which is not available
jolz: Compiled code for java/util/HashMap$Entry.getKey; uses a CPU feature which is not available
the last few entries are:
jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$EnsureLoserLiveRangeIterator.apply; uses a CPU feature which is not available
jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$GenBitSetIterator.apply; uses a CPU feature which is not available
This eventually leads to ORA-07445: [joe_run_vm()+15316] [SIGSEGV] [ADDR:0x24000] [PC:0x33FAB74] [Address not mapped to object] []
What is causing the "CPU feature which is not available" messages to be reported?
Thank for any assistance.
Tracey

Hi Tracy,
This typically means that the JIT has persisted compiled code that was built on one set of hardware that may use chipset features that are not available on the hardware at runtime. An example of this might be if the code were originally compiled on a modern x86 chip and makes use of SSE2 instructions, but then is asked to later run on old Pentium hardware without such instructions.
Regardless, it should not lead to ORA-7445. Can you please file an SR with your exact hardware description as well as tracefiles and also description of your deployment (e.g. wehther this database was migrated from one machine to another, etc...)
In the meantime, a likely workaround for you would be to connect as SYS and issue:
TRUNCATE TABLE SYS.JAVA$MC$
and then restart the instance.
thanks,
-Rob
JVM development

Catalogs, code groups and codes not available in service order in Web UI

Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DP

Deepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin.

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

"connection not available error code - 4161" what...

Hi
I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
Thanks

I did a comparison, and your connection string is different
than mine. Mine does not show any password/userid entries, but
perhaps that's the difference between using SQL and SQL Express.
(I'm using SQL.) I am, of course, assuming that you have actual
values for "servername," "database," etc.
Given that you can't get in from RSC Explorer, it would seem
that either you are not using the same userid/password as the one
you set up for the administrator when you created the DB, or else
there's something wrong with the DB itself.
Try creating a test DB. Be careful to specify the same
administrator name and password as the login you use to get on the
RSC server. After you've created the test DB, open it up from RSC
Explorer. If you can do this successfully, then everything ought to
be working OK. From that point, I'd start over and create a new DB,
and upload to that one. (In fact, I've actually gone through
exactly that total exercise before.
G

Code insight is not available when eding jsp by using 10.1.3.36.73

I use 10.1.3.36.73 jdeveloper on windows to develop web application,
but code insight is easy not available when editing jsp 2.0.
I must restart jdeveloper and it still isn't often available.
ex. in jsp
ArrayList al = new ArrayList();
for (Iterator it=al.
Code insight is not supported for jsp or this is bug?

Do you still have any code error in your jdev editor? no matter the error is JSP or HTML (it is signed by little red box at the right of the window near scroll bar), code insight sometimes is not available.

I buy an OSX upgrade; I get a redemption code; and, in the Mac Store App, 'It's not available in the U.S. store-.What the frick? Is this a joke, Apple?

I buy an OSX upgrade; I get a redemption code; and, in the Mac Store App, 'It's not available in the U.S. store….What the frick? Is this a joke, Apple?

Hello MTRivers,
You can contact Apple Support about this problem (United States): 1-800-275-2273.
They will help you, and provide a solution.
Cedric

Problem by startup Oracle 8i!!And Error Code: ORA 01034-ORACLE not available!!

Hello all!
I need urgent help!!
I'm trying to start Oracle 8.1.6 i on Solaris 8. But there are lot of error:
1. During initialising the database with dbassist, the error Code Error Codes: ORA 01034-"ORACLE not available" and ORA-01012-"not logged on" were shown.
2. I'm trying to start Oracle 8i on Sun Solaris 8 by typing svrmgrl-connect interal-startup. But the following was shown on by screen:
passau% svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup
LRM-00109: could not open parameter file '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
Please help me!!
My e-mail Adress: [email protected]

I am pretty sure this has to do with the SGA..
what you may have to do is adjust you
system file
Here the values for /etc/system file: for more info look under
Oracle specific parameters (documetation) set shmsys:shminfo_shmmax=122496729 set semsys:seminfo_semmap=150 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=12767 set semsys:seminfo_semmni=200 set semsys:seminfo_semmns=200 set semsys:seminfo_semmsl=200 set semsys:seminfo_semmnu=200 set semsys:seminfo_semume=100 set shmsys:shminfo_shmmin=100 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=100
good luck
[email protected]
null

Unhandled Exception "Could not find any available Domain Controller"

Hi,
I keep on having exchange 2010 loosing contact to domain controllers.
"Unhandled Exception "Could not find any available Domain Controller.". EventID 1. Once I restart the sever, this error disappear and reappear again after a few days.
When I run AD setting, the result shows as below. Update version is currently as at 14.02.0342.003. And boths DCs have 100% uptime.
PS C:\> Get-ADServerSettings | fl
RunspaceId
: 9392eb25-bcdc-462e-816b-2d5626c572a5
DefaultGlobalCatalog
: DC2.com.au
PreferredDomainControllerForDomain
DefaultConfigurationDomainController
: dc1.com.au
DefaultPreferredDomainControllers
: {DC2.com.au}
UserPreferredGlobalCatalog
UserPreferredConfigurationDomainController :
UserPreferredDomainControllers
RecipientViewRoot
ViewEntireForest
: True
WriteOriginatingChangeTimestamp
: False
WriteShadowProperties
: False
Identity
IsValid
: True
Could you please help as this exchange server has our management team and their outlook keep on going offline.
Thanking you in advance.
Cheers,
Pwint

I have another issue. I was trouble shooting exchange bin folder for permission and as a result of it Exchange transport service stopped and couldn't restart. I quickly changed to local service account and able to restart. Fixed the transport roles folder
permission but don't know the password of network service account so I can't change it back. I can send and receive emails internally and externally but I am worried that by running with local account maybe not recommended? Is it safe to reset network service
password? Thanks. I am freaking out... Regards, Pwint

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

Mexico Country code is not available in CallerID r...

While registering Caller ID feature, Mexico Country Code is not available as an option.
How will the Mexicans register their number in Caller ID.?

Try change the DNS server to 8.8.8.8 in the wifi settings.
And use another country.

Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version

Hello somebody can help me.
Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Why does this error message keep coming up when I enter my code in ? Sorry, our redemption service is not available. Please try again later.

I have purchased adobe photoshop elements 11 and when i type my code in its says Sorry, our redemption service is not available. Please try again later.

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

UIButton tag not available in controller code

Similar Messages

Maybe you are looking for