UIX form need to clear cached data within session

HELP! I have some UIX forms created with JHeadStart, thay work fine except but when the underling table data changes (from another user session or an update trigger from different table) the forms will NOT show refreshed data, unless I delete my browser session cookie. Is there one place to clear the cache, and force the data to be reloaded each time its displayed?
JDeveloper 10.1.2
JHeadStart 10.1.2
Thanks, Craig S.
Message was edited by:
user503876

In your struts diagram, rightclick the page and pick 'goto code'
This will overwrite your data action. There overwrite the method you use, most likely onCommit(....)
Use the appmodule to find your viewobjects there and clear the cache.

Similar Messages

Some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file mana

some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file manager, but it still is not in the music library in play music.

Cyndi6858, help is here! We'd be happy to help figure this out. Just to be sure though, the Droid Maxx should not have an SD card. Is this the Droid Razr Maxx? How did you add the music to the device? Are you able to see the files and folders located on the SD card or device when plugged in?
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

I need to clear all data from my old iphone 4 so i can set up a new iphone4

i need to clear all data from my old iphone 4 so i can set up a new iphone4

settingss -general - reset - erase all contents and settingss.

UIX form will not refresh data within session

I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time its displayed? I'm using JDeveloper 10.1.2
Thanks, Craig Smith
Message was edited by:
user503876
Message was edited by:
user503876

Dear Sir...
in the struts page flow diagram
1- create a data action
2- drag the execute method from the viewobject methods and drop it on the data action
3- draw a page forward from the data action to your data page
4- finally ad a refresh link in your page which links to your data action
now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
best regards

Does clearing cache & data in Google Services Framework really force OTA updates?

While waiting for Big Red to push the OTA 4.3 update to their Samsung GS3 customers, I read somewhere that clearing the cache + data + selecting Force Stop in the Google Services Framework app [settings>applications manager>all] before checking the device software update status [settings>about phone>software update>check new] would force available OTA updates to the device; however, after repeated attempts, I've been unsuccessful achieving that objective. In fact, after doing all that AND removing both the battery + sim card for 30-60 seconds, the date/time stamp in the update status continues to read the most recent status check.
Though I've seen several claims of success doing this on different devices, has anyone else in the VZW Community tried this and has gotten a successful 'force update' on their GS3?

No, that will not force an update, especially one that does not exist.

Do you need to clear cache everytime it gets full?

Just seeing if there is benefit to clearing cache everytime it gets full?

Well; if you fill a glass with water, how much more can you
put in the glass? Answer, It's already full. You probably have
a problem with the cache cleaning itself out of outdated or
old information. Check your settings.

Clear cache in the session

In my application, there are multiple tabs created. Each tab has a different functiionality. When I enter some value in the first tab and after processing the page, if I navigate to another tab and again come back to the previous tab, the value entered in the text field is still displayed.
My requirement is to make the contents of the text field null when ever I navigate to that page.
In short within a session, the values entered in the text fields are not cleared when navigating between pages.
Any ways to achieve this?
Regards
Amit.

U have clear cache option in tab entries details.. set it to pages which U want f.e. 3,7 - will clear cache of page 3 and page 7.
Other way is to change in item option "Source Used" to "always replacing...."
is that what U are asking?
Edited by: nirud on 2009-09-22 06:13

Need to clear cache to see dynamic changes?

I have a Flash site/movie that loads several JPG's via
button.
I'm using loadMovie.
Client is saying that he has to clear his cache to see
chaqnges when replacing or updating these images.
Same is happening on some dynamivc text files.
I should know this by now but....
Why and can I avoid this?
Thanks in adavance. Client is asking.

Leo,
> I have a Flash site/movie that loads several JPG's
> via button.
>
> Client is saying that he has to clear his cache to see
> chaqnges when replacing or updating these images.
Yup, this happens. :-/
> I should know this by now but....
>
> Why and can I avoid this?
The theory behind cacheing is actually a good thing. After
all, why
waste network traffic if the user already has the file,
right? The trouble
is, browsers don't always seem able to know when a file is
new. It may be
due to the slight differences in your clock and your client's
clock,
especially if you're uploading and checking these in a very
quick
turnaround.
The solution is to "trick" your browser into thinking it's
requesting a
new file. One way to do this is to append a query string to
the end of your
requests for external files.
In the loadMovie() parameter that specifies the URL, do
something like
this ...
"blah/blah/sample.jpg?ver=001"
... which essentially appends a fake variable, ver (for
version), to your
request. When you make a change, update that 001 to a 002,
and so on.
Pretty slick. I would also do this in the HTML that actually
embeds the
SWF.
"blah/blah/sample.swf?ver=001"
... in both the object and embed tags.
If you really want to get fancy, use the Math.random()
method to
generate a new number every time. In your ActionScript ...
"blah/blah/sample.jpg?ver=" + Math.random()
... but remember, that means your client will re-download
this file *every
time*. That may be what you want during testing, but it's
almost certainly
not what you want when the project is complete -- so don't
forget to remove
this trick later.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Need to clear 'other' data on my iphone5 running ios 6.1.3

Ok so ive been scrolling through every link on this forum and theres a lot of people who have no clue on what it is. They just say 'restore' or download a fileapp such as 'diskaid' my point being I shouldnt have to do this to clear the corrupted data. No one seems to be able to privide a proper solution but just throw different ideas at what they guess it could be. Im pretty savvy with the systems operation and what not. But this one has stumped me, ive reset my phone. restored from backup (which would only do it again as its a mirror image of the old phone). and tried to find the corrupted data and its just proving a thorn in my side its been at 9.5 gb and I want to find a way around this issue without restoring from new as I dont believe i should have to do that.
Any help on this 'reoccurring' issue would be great!

From Apple's stable no other solution except what you wrote. Could use iCloud to restore from backup.
Google Search for a third party utility.
Message was edited.

7.2 ICM Script - Need to Grep for data within Formula Editor

We have a massive SET_SKILL script. I'm the FNG and have been
tasked with grepping every IF node in this script and using the formula editor
to determine the 4 digit Route Code and where that Route Code is being routed.
The current engineering team has built an Excel macro that involves cutting and pasting the body of text
from formula editor into the Excel macro and repeating that process over and over and over!
There are literally hundreds of IF nodes in this script and I am hoping that someone has run into a similar
need before. I've tried exporting the script but can't figure a way to read and grep the proprietary format for the 4 digit code and
the next node it is being routed to.
See attached screenshots.
TIA,
Amir

"Find" can certainly work for you.
If I were building that script, rather than have a huge set of IF nodes like that, it's much easier to do this with a CLID node with the "expression" set. This node is often used to analyze area codes of ANIs and route accordingly, but it has a lot of flexibility.
You will get a nicer style of branching and you can set up all the patterns and in Excel and copy and paste them right in there.
This is a CVP script where I am looking at Caller Input coming back from Audium to decide on what to do with the menu item selected.
Regards,
Geoff

Clearing Personal Data From Session

When the user leaves the page using the "X" button i want to clear the personal data from the session. To do this i eaither need to invalidate the session or call code which will clear my java objects.
The only way i think i can do this is through calling a javascript method on my body tag which will force a unload event to be called. In turn Javascript is called and the form submitted. However this doesnt appear to be working. How would you recomend i do this?

h1400046 wrote:
When the user leaves the page using the "X" button i want to clear the personal data from the session. To do this i eaither need to invalidate the session or call code which will clear my java objects. What if the user has two or more browsers open on the same session and decides to close one and to proceed with the other?
Forget about it. Let the session expire itself. Or introduce kind of a login/logout system.

Clear app data or cache

Hi,
i want to clear cached data in my apps couse has a big size ...
like Tango: app size=71 MB and data size=153 MB !
BBM: app size= 70 MB and data size=340 MB !!
i really need that
i had an android device its have button to clear cache and data

No support ??

Error message says "clear cache"

I have Lightroom 3.6. My desktop computer recently had to go to the recycling so had to load everything from scratch onto a laptop. When I open Lightroom I get an error message that I need to clear cache. I am unable to see Bridge and need to use it.

Tools > Options > Network (tab) > "Clear Now" buton

LOVE Firefox! I have just launched a website. One designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs.

LOVE Firefox! I have just launched a website: www.animalhealingandhumans.com. My web designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs. How can I achieve a much better response time to good feedback?

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

Need to clear form automatically when closing, otherwise it reopens with the data showing.

I have just completed my first form A9 (address is)
http://www.financialcounsellors.org/HUGS_Application_Form_to_FCAWA_3_pages.pdf
I have a clear button which works fine (If the user remembers to use it)
The problem is IF the user forgets to use the clear button. THE NEXT TIME the form is opened the information is still visible ?
How can I set it so as the form will automatically clear when closing.
Help..Please anyone.

Not sure if this is what I.m after steve. The object is for persons to fill out the form on the web and then print it.
The form will then be closed. Will makeing the form read only do that?
I'm new to this so am still getting to grips with it.
1. There are options in Acrobat to make fields Read only but how would you make the whole pdf document read only and still be able to do the functions I just outlined ?

UIX form need to clear cached data within session

Similar Messages

Maybe you are looking for