UJS_ACTIVATE_CONTENT crashes on Laod Data into Appset step. BPC57NWSP2.

I had some problems using UJS_ACTIVATE_CONTENT.
Maybe you or someone else working on BPC can help me.
 
I am testing BPC75NW SP2 on a clean SAP NW 7.01. 
My server has only the ABAP AS 
 
 I upgraded all software components to SP6
 I then added BI_CONT_704
 Finally I installed BPC75NW + SP01 + SP02 + INCZ1
 
 Thus my system status is:
 BI_CONT 704 0000 Business Intelligence Content
 CPMBPC 750 0002 CPM Business Planning and Consolidation
 PI_BASIS 701 0006 Basis Plug-In
 SAP_ABA 701 0006 Cross-Application Component
 SAP_BASIS 701 0006 SAP Basis Component
 SAP_BW 701 0006 SAP Business Warehouse 
 
 All went fine upto there.
 
 Now I ran UJS_ACTIVATE_CONTENT with all options except Load Data and it went fine)
 I ran UJA_DATA_CHECKER and all seems normal.
 
 But when I run UJS_ACTIVATE_CONTENT with the "Load Data Into Appset" option
 I have a short dump after some steps have completed.
 Here is some info on the short dump, It seems to be related to the activation of hierarchy or to some setting with SIDs. (see end of post).
 
 I restored a backup of my server prior to the Content Activation and repeated the procedure with the same result.
 
 I checked the following notes that refer to the issue, but they do not solve my problem.
 1) Note 1237497 - Short Dump while running program UJS_ACTIVATE_CONTENT
 2) 1409003 - BPC NW: Error in ST22 dump: "System error in program SAPLRRK0 and form CHECK_KHANDLE" using transaction SE38 then executing UJS_ACTIVATE_CONTENT
 3) 1434401 - BPC NW: Error: "Failed to activate SAP NetWeaver BI InfoObject for dimension" when trying to process a dimension
 4) Note 1434177 - Upgrade from BPC7.0 to 7.5
 5) 1420399 - Exception condition "X_MESSAGE" raised
 6) Note 1333160 - Runtime error MESSAGE_TYPE_X during InfoObject activation
 I thought the last one might help me but SNOTE refuses to install it, saying that it does not apply to 701.
 
 
 39 FORM SAPLRRSI LRRSIF00
 X_MESSAGE_SPEC
 38 FORM SAPLRRSI LRRSIF02
 VALSIDS_CORRECT
 37 FORM SAPLRRSI LRRSIF02
 NEW_SIDS_CREATE
 36 FORM SAPLRRSI LRRSIF02
 VALUE_TO_SID_CONVERT1
 35 FORM SAPLRRSI LRRSIF02
 VALUE_TO_SID_CONVERT
 34 FUNCTION SAPLRRSI LRRSIU08
 RRSI_VAL_SID_SINGLE_CONVERT
 33 FORM SAPLRRHI LRRHIF10
 HIEDIR_GET
 32 FUNCTION SAPLRRHI LRRHIU10
 RRHI_HIERARCHY_ACTIVATE
 31 FUNCTION SAPLRSNDI_SHIE LRSNDI_SHIEU03
 RSNDI_SHIE_ACTIVATE
 30 FUNCTION SAPLUJN_API_BI_IOBJ LUJN_API_BI_IOBJU10
 UJN_API_HIE_ACTIVE
 29 METHOD CL_UJA_HIER_DAO===============CP CL_UJA_HIER_DAO===============CM001
 CL_UJA_HIER_DAO=>ADD_HIER
 28 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM01B
 CL_UJA_DIM=>IF_UJA_DIM_DATA~UPDATE_HIER
 27 METHOD CL_UJA_MD=====================CP CL_UJA_MD=====================CM00F
 CL_UJA_MD=>WRITE_DATA
 26 METHOD CL_UJA_MD_CACHE===============CP CL_UJA_MD_CACHE===============CM009
 CL_UJA_MD_CACHE=>WRITE_DATA
 25 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM013
 CL_UJA_DIM=>IF_UJA_DIM_DATA~WRITE_MBR_DATA
 24 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM006
 CL_UJA_DIM=>WRITE_MEMBER
 23 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM02I
 CL_UJA_DIM=>UPDATE_MEMBER
 22 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM02H
 CL_UJA_DIM=>PROCESS_MBR_DATA
 21 METHOD CL_UJA_DIM====================CP CL_UJA_DIM====================CM01L
 CL_UJA_DIM=>IF_UJA_DIM_DATA~PROCESS_MEMBER
 20 METHOD CL_UJD_MASTER_LOAD============CP CL_UJD_MASTER_LOAD============CM005
 CL_UJD_MASTER_LOAD=>WRITE_DATA
 19 METHOD CL_UJD_PIPE_SIMPLE_TARGET=====CP CL_UJD_PIPE_SIMPLE_TARGET=====CM002
 CL_UJD_PIPE_SIMPLE_TARGET=>IF_UJD_PIPE_EXECUTE~PROCESS_INPUT
 18 METHOD CL_UJD_MAIN_PIPE==============CP CL_UJD_MAIN_PIPE==============CM001
 CL_UJD_MAIN_PIPE=>EXECUTE
Edited by: Claudio Ciardelli on May 3, 2010 4:14 PM

I managed to solve the problem.
Initially I was restoring a backup after the dump and retrying from scratch , thus obtaining the same error each time.
In fact when I tried to repeat the action after the crash the program runs through to the end from the point where it failed.
Problem solved.
Claudio

Similar Messages

BPC 7.5 NW Installation- Dump on UJS_ACTIVATE_CONTENT Load Data Into AppSet

Env: Win 2008 R2, SQL 2008. NW EHP2 702, BI_CONT 706,
After installing Apshell running UJS_ACTIVATE_CONTENT, I am now hitting a road block at "Load data into appset" step.
The st22 dump analysis is like this
"MESSAGE_TYPE_X" " "
"CL_RSDMD_UPDATE_MASTER_DATA===CP" or "CL_RSDMD_UPDATE_MASTER_DATA===CM00X"
"__CREATE_XY_IMAGES_PREPROC"
Couldn't find much on SMP or googling.
Anyone faced this issue before, any insights on how to resolve it.
Appreciate your response.
Thanks
Sreekanth

Hi Valerio
Thanks for your response.
As regards the BI_Cont 706, you will find more info the same note that you referred. The statement below from note 153967 suggests, NW 7.0 EHP1 & 2 are supported for
The following SAP NetWeaver Releases are pre-requisite for following BI Content Releases, that by definition are grouped into the same BI Content Release Sequence: BI Content 7.01; 7.02; 7.03; 704; 7. 05
1. SAP Netweaver 7.0 (including SAP NetWeaver EhP1 and EhP2):
The note also says :
SAP NW 7.0 BI Content Add-On 7.06 (BI_CONT 706)
delivered in July 2010.
SP1 is mandatory.
End of maintenance: The BI Content Add-on 7.06 will remain in maintenance until a new BI Content release is delivered or until the underlying SAP BW Release is no longer maintained.
BI Content Extension for BI Content 7.06 (BI_CONT_XT 706)
Delivered in June 2011.
SP1 is mandatory.
Prerequisite: EhP2 for SAP NetWeaver 7.0 AND SAP NW BI Content Add-on 7.06
End of maintenance: The BI Content Extension for BI Content 7.06 will remain in maintenance until a new BI Content release is delivered or until the underlying SAP BW Release is no longer maintained.
As regards the BPC pre-activity I have completed all pre-requisites mentioned in the BPC Inst guide, is there any other doc that I should check.
As for the client I have one client for BI (client 200) and another client for BPC (Client 100), I have activated RSA1 on client 200. I have created the Background user, assigned permissions, setup RSTPRFC, set default BW client BWMANDT etc.
How do I recreate the appshell, by running UJS_ACTIVATE_CONTENT ?
Should I reset anything ?
Appreciate your response.
many thanks
Sreekanth

Importing excel data into oracle tables

Hello gurus,
Importing excel data into oracle tables..
I know this is the most common question on the thread ...First, i searched the forum, i found bunch of threads with loading data using sqlloader, converting excel into .Txt, tab delimited file, .csv file etc....
Finally i was totally confused in terms how to get this done....
Here is wat i have
   - Excel file on local computer.
   - i have laod data into dev environment tables(So no risk involved, but want to try something simple)
   - Oracle version 11.1.0.7
   - Sqlplus and toad (editors)
Here is wat i like to do ....i dont know if its possible
    - Without going to unix server can i do everthing on local system by making use of oracle db and sqlplus or toad
   SQLLOADER might be one option...but i dont want to go the unix server for placing files and logs and stuff.
Wat will be best and simplest option to do?? and wat format will best to convert from excel into csv, or txt or tab delimited etc.....
If you suggest sqlloader, any code example will be greatly appriciated.
Thank you so much!!!

Hi,
user642297 wrote:
Imran,
This is increadible option in toad!!! It works absolutely sweet!! I have toad 9.7 version. IT works great. Thank you so much!!You are welcome :)
Well i have further discussion on this ....this option is great if you doing in staging or development area. What if your doing in prod?? If you automating the sqlloader then how do u do it?? I think we still need to stick with traditional approach of laoding data by making use of SQLLoader right ?? If m wrong please correct me.well, in our case, we do have access to a custom schema in prod where we create the staging table and load the data from datafiles.
try this:
load data
infile 'C:\dest.csv'
into table dest_table
fields terminated by "~" optionally enclosed by '"'
TRAILING NULLCOLS
(name,
owner_nm,
description_column,
UPDT_DT DATE 'MM/DD/YYYY')
{code}
you can get more info about sql loader and your error here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch05.htm
http://www.allinterview.com/showanswers/53766.html
And one more quick question ...i found an example of control file , in that i see .dat format file. Is it a data file ?? can i try that option ?? But in excel i didnt see to convert the .dat format file.
Any thoughts ???
It is same as a delimiter text file.
steps to create a .dat file (from a excel file):
1. Insert a column between two columns and populate it with the delimiter (in our case, it is ~)
2. Save the file as unicode text.
3. Open the file in text editor and remove all the tabs (find an replace with blank)
4. Save the file as "DEST.dat". Select encoding as UTF-8 while saving.
5. Your .dat file is ready.
Regards
Imran
Edited by: Imran Soudagar on Apr 22, 2010 10:22 PM

Steps to insert xml data into oracle

Please give me next steps to insert xml data into oracle 9i:
i've been doing this steps :
1. create folder in oracle port:8080
2. copy xsd into folder
3. register schema
4. Give me next step...
5.
6.
Thanks

this is my complete xmlschema
<?xml version = "1.0" encoding = "UTF-8"?>
<xs:schema xmlns:xs = "http://www.w3.org/2001/XMLSchema">
 <xs:element name = "A3A8Vers" type = "xs:string"/>
 <xs:element name = "F1F5Vers" type = "xs:string">
 </xs:element>
 <xs:element name = "sequence" type = "xs:string">
 </xs:element>
 <xs:element name = "amf" type = "xs:string">
 </xs:element>
 <xs:element name = "trnsKeyNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "mac" type = "xs:string">
 </xs:element>
 <xs:element name = "encryptionKey" type = "xs:string">
 </xs:element>
 <xs:element name = "signature" type = "xs:string">
 </xs:element>
 <xs:element name = "signer">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "entityNumber"/>
 <xs:element ref = "keyNumber"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "entityNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "keyNumber" type = "xs:string">
 </xs:element>
 <xs:element name = "pblKey">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "entityNumber"/>
 <xs:element ref = "entityRole"/>
 <xs:element ref = "keyNumber"/>
 <xs:element ref = "publicKeyVal"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "ntrTime" type = "xs:string">
 </xs:element>
 <xs:element name = "deActionTime" type = "xs:string">
 </xs:element>
 <xs:element name = "actionTime" type = "xs:string">
 </xs:element>
 <xs:element name = "entityRole">
 <xs:complexType>
 <xs:attribute name = "role" default = "INVALID">
 <xs:simpleType>
 <xs:restriction base = "xs:NMTOKEN">
 <xs:enumeration value = "TKD"/>
 <xs:enumeration value = "SKD"/>
 <xs:enumeration value = "INVALID"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:attribute>
 </xs:complexType>
 </xs:element>
 <xs:element name = "publicKeyVal">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref = "exponent"/>
 <xs:element ref = "mod"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name = "exponent" type = "xs:string">
 </xs:element>
 <xs:element name = "mod" type = "xs:string">
 </xs:element>
 <xs:element name = "encriptionTransKey" type = "xs:string">
 </xs:element>
 <xs:element name = "keyType" type = "xs:string">
 </xs:element>
</xs:schema>.
I use command to create table :
create table elements of xmltype
xmlschema "http://192.168.1.1:8080/test.xsd"
element "publicKey"
. But why the result,table as object type. so i cant use command "desc <table_name>;"

Step- by- Step on How to Load Excel data into Crystal Reports?

Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
Vijay

It's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

HOW TO LOAD R/3 DATA INTO SAP BI USING PROCESS CHAINS?

Hi,
Can we load R/3 data into BI using process chains?... I loaded data from R/3 into Infocube using generic extraction using view... took 2 tables EBKN and EBAN and ceated view.
In PSA I can find all the 2388 records but when I load into datatarget in transferred tab there are 2388 records but in added colum i could find only 2096.....
I deleted the request and want to load through process chains....... but how to do ?????? without flat file ...can we laod using process chains?
I appreciate any inputs.......
Regards,
Prasanthi.

did you even bother looking at the links in my previous posts???
read the docs...try yourself...if you encounter specific issues, you can post them on the forum...
if you're really expecting somebody to post a step by step for process chain, i think you can wait a long, long time...

Dynamically fetaching data into PL/SQL tables help

Hi,
I am develioping a PL/SQL procedure in which I am creatig 24 PL/SQL tables of the same type.
But while inserting data in them I need to use the table names dynamically i.e., the Execute immediate used to put the data into the tables would remain same just I need that for each and every run of for loop for that Execute immediate statement, it should use different table name.
Please see sample code below:
col_name varchar2(20);
Type RA_TABLE is table of CALL_DETAIL_EXCEPTION.IC_CIRCT_GR_CD%TYPE
index by binary_integer;
MY_RA1 RA_TABLE;
MY_RA2 RA_TABLE;
MY_RA3 RA_TABLE;
MY_RA4 RA_TABLE;
BEGIN
for idx in 1..cnt_interval Loop
Col_name := 'MY_RA'||idx;
query1:='select Trunk_info bulk collect INTO MY_RA'|| idx ||' from dbl.vw_cgi v where not exists (select 1 from dbl.varun f
where f.ic_circt_gr_cd= v.TRUNK_INFO and f.call_gmt_dnect_dt_time between
to_date('''||stime||''',''yyyymmddhh24miss'') and to_date('''||etime||''',''yyyymmddhh24miss''))';
Now when I execute this code, it gives me an error for query1 saying that it is unimplemented feature in Oracle.
It is not able to pick up that dynamic table name.
Please help!

user9315951 wrote:
I am develioping a PL/SQL procedure in which I am creatig 24 PL/SQL tables of the same type.All wrong. This is NOT how one treats data in PL/SQL.
There is NO such concept as PL/SQL "+tables+". You are in fact defining associative arrays and not using these as associative arrays, but as normal arrays. Your code can consume vast amounts of server memory as private process memory. Your code CAN crash the Oracle database server (yes, I have seen this multiple times - even in production).
Your code is flawed. Your approach is flawed.
I suggest that you take several steps back, gain some understanding of fundamental Oracle concepts, about what does scale and perform in PL/SQL and SQL, and then apply these concepts and principles.

Numbers for iPad crashes when entering data

I have the same issue as described in this thread:
http://discussions.apple.com/thread.jspa?threadID=2603291&tstart=0
Basically Numbers crashes almost every time I tap on a cell to input data. It doesn't seem to happen if the cell contains text, or a cell that is the output only of a formula, but it does crash (almost always) whenever I tap a number that's an input into a formula, or a cell with star-value. Sometimes Numbers crashes when I tap an empty cell (even if there is no formula attached to it), but not always.
This occurs in every spreadsheet that I use, including the default "Getting Started" spreadsheet, spreadsheets that I created using templates found in Numbers, and spreadsheets that I imported from my MacBook created in (the most recent version of) Numbers. It's my perception that it first occurred infrequently in Numbers 1.1, and got worse over time.
I use Numbers mostly for a single spreadsheet that keeps track of my invoices. I never use any graphics in the spreadsheets. The formulas are all pretty simple.
(The spreadsheet is used to track sales, so each line has a cell for the dates of order and payment, the number of items, the name of the item, the items total, and at the bottom there's the invoice total. Small stuff like that)
Right now there are about 12 invoices in the spreadsheet. Each invoice is a separate sheet on the same spreadsheet, and I periodically make a duplicate sheet in which I can change some of the values and text (btw, text boxes are unaffected). There are like on average 30 populated cells per sheet, so the total is like 400 populated cells on this spreadsheet.
Unfortunately, due to this bug, I cannot use Numbers for this purpose at all. I can make a duplicate of a (blank or filled-in) Spreadsheet, but as soon as I start adding values to the chart, the screen goes black and I am returned to the iPad home screen. This problem also occurs on my very first invoices, even though they were created just fine at the time (using Numbers 1.0).
I only have four other spreadsheet files in Numbers and they all suffer the same problem. One is the default Numbers "Getting Started" spreadsheet. It crashes on the "Table Basics" spreadsheet when I tap the pink box as instructed.
I created a "Budget" spreadsheet from Numbers's templates. It crashes when I enter data in the "Budget" column in the first ("Categories") chart, but not the "Actual" and "Difference" columns. It also crashes each time I enter data into the "Amount" column of the second ("Transactions") chat, but not any of the other columns ("Date," "Description," and "Category"). So, this spreadsheet is unusable on the iPad.
(I did export this sheet to Numbers on my Mac, and it worked fine.)
I created two other spreadsheets in Numbers about a month ago and I had no problems. They are just two-column charts that I printed out to display some information. One has 30 populated cells, the other has about 100. On both of them, I can edit a cell that has text-only, but I cannot enter any data into an empty cell! It crashes! Also, FYI, there are Japanese characters in the text-fields.
I hope this is not too much information or too little. Just trying to get some help for myself or to help whoever might work on this problem.
Any ideas? Any more info needed? This is on a 3G 32gb iPad using version 3.2.2, and Numbers 1.2.

The issues you describe have nothing to do with the other posting you are referencing. They state they have the following problem:
(numbers on ipad) drops several of the important features that I created in the laptop version such as headers and footers, fonts, steppers, sliders, etc.
It sounds like your having no data entry at all. There is a known issue with certain formulas causing crashes, but not every data entered like you seem to be stating.
I might have missed it, but did you delete and reinstall Numbers on your ipad?
If not, please write down EXACTLY the steps used to reproduce the problem, then go to http://www.apple.com/feedback and input this into a bug report for ipad numbers. Be very specific as to the steps involved to get to the crash point.
Thanks
Jason

Can not extract data into BW from SQL SERVER

Dear All,
I meet a problem to extract data from database(MS SQL Server 2000(sp3)) into BW now and can not extract data into BW ODS, even PSA, In the monitor, display yellow light(0 from 0 record), detail message just display message "data request arranged" "confirmed with: confirmation" in requests(message) step; "missing message: request received" in extract (message) step; "no data" in processing(data packet) step and so on. but in fact, there are two records in my database test table and DB connection is OK. Even I can extract data from another test oracle database into BW ODS successfully.
Our BW system has two BW applicaton server and use oracle database. the one application server locates on IBM AIX host. the another one locates on one NT server. the application server on NT server is used for data extration from MS SQL SERVER database into BW oracle database. and MS SQL SERVER and NT platform application server locate on same one host. DBSL was installed on the NT application server already. and DB connector also was created successfully for MS SQL SERVER and datasource also was generated. DBSL type is Kernel640-WIN-IA32bit-unicode. my BW system is ECC5.0/UNICODE/ORACLE. all table/view/field name of MS SQL server is upcase and have not any specific character. for example: ZDEMO etc.
wait your help.
Thanks in advance.
Billy

Hi Ravi,
Could you help me to get knowledge about the followings:
approximately how many records extracting and transfering from SAP R/3 to BIW in an organisation. for that how much time will take .
How to extract data from two are three source system to BIW. Kindly help me with step by step explanation .If any screen shots with documents pls fwd to my ID. "[email protected]"
Your help highly appreciated.
Thanks.
Hema

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

How to store data into database by reading sql statements from text file

how to write java program for storing data into database by reading sql statements from text file

Step 1: Create a property file to add various queries.
Step 2: Read the properties file using ResourceBundle
Step 3: Use the jdbc to execute the query read from the property file.
So in future if you need to change query no need do any modifications in java program. But depends on how you use the property file.

How can i insert data into DB from my page programatically in Oracle ADF..?

Hai, this is praveen.
I have created an EO and VO, when i have inserted data by dragging and dropping from DataControl -->Operations-->Create. I have successfully inserting data. But how can i do it programatically. What are the pre-defined steps that i can use over there to insert data into table programatically. Could u plz help me?

Hi,
You have to create an action Listener in the bean for any button.
Then call an AM method.
In that you have to do the following
ViewObject yourVO = getYourVO();
Row r = yourVo.createRow();
r.setAttribute("Column1", value1); //the name of column should be as it is in your vo attribute.
yourVO.insertRow(r);
this.getDbTransaction().commit();
Thanks

Publish dates into iCal from Numbers

I am trying to publish dates from a chart in Numbers to iCal or Outlook calendar. Is this something that can be done?

Solved, I think! What you need to do is log on to your icloud account at www.icloud.com, go to the calendar screen, click the gearwheel and choose New Calendar. Create a calendar here (ie up on the iCloud) with the name you want for your imported calendar data. Then switch to iCal - you may have to quit and relaunch for the new iCloud calendar to appear (or it will probably do so automatically if you wait long enough) then import the data using File->Import->Import... When you get to the step where it asks which calendar you want to import the data into, choose the new iCloud calendar you've just created. Job done!
To be complete in my answer, I don't think you can exactly do what you want to do, at least not at present. There doesn't seem to be any way to publish a calendar to iCloud after the first time you set up iCloud on your Mac when it exports any calendar data that is on the Mac at that time. I suppose that Apple feel that the way I have described works by exporting from one calendar and importing into another, so no need to provide a way of doing it directly.

UJS_ACTIVATE_CONTENT crashes on Laod Data into Appset step. BPC57NWSP2.

Similar Messages

Maybe you are looking for