UK Job

Job Opportunity : Systems Developers
Bytronic Automation Ltd is looking for experienced LabVIEW and Lookout
programmers to join us here in the Warwick Technology Park, U.K.. We are a
leading Alliance member and currently have a number of projects in a variety
of technologies.
If you would like to become part of our expanding team of systems developers
and work (either full time or on a contract basis) in a lively atmosphere,
please contact myself in confidence.
Andrew Edge
Managing Director
Bytronic Automation Ltd
Email : [email protected]
Website : www.bytronic.com
Tel : 01926 623350
Fax : 01926 623351
Address : Innovation Centre
Warwick Technology Park
Gallows Hill
Warwi
ck
CV34 6UW

Seems pathetic, hope for the best

Similar Messages

  • Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

    Hi All,
         I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
    I have tried the following:
    reset IIS
    restarted the Timer Service
    When I try to use powershell command to stop I get the following error:
    Can anyone who went through this help PLEASE
    Stop-SPServiceInstance : An object of the type
    Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
    "job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named
    "SPTimerV4". Rename your object or delete the existing object.
    At line:1 char:127
    + ... pplication"} | Stop-SPServiceInstance
    + ~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
    SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
    ception
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
    iceInstance

    Hi,
    It seems that the issue is in the timer job definition for executing this operation.
    My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
    This might be helpful:
    http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job 
    I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
    As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm. 
    BR,
    Ivan

  • Report program when run in background job getting cancelled immediately

    Hi
    When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
    I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background  successfully.
      CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY     
          EXPORTING                                            
            IS_LAYOUT         = IS_LAYOUT                    
            I_SAVE            = 'A'                        
            IS_VARIANT        = GS_VARIANT                   
          CHANGING                                           
            IT_FIELDCATALOG   = IT_FIELDCATALOG               
            IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].     
    Please suggest.
    Thanks and regards
    Rajani Yeluri

    Hi Rajani.
      ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
    system cancelled your process immediately.
    Hope it helps.
    Sayan.

  • Report Job was cancelled upon user request???

    Hi,
    My reports take more than 10 minutes to complete, most times I get
    "Report Job was cancelled upon user request".
    error, how to fix this problem? Is there any time limit inside the report I can set.
    Thanks

    hi ,
    There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
    Hope this helps
    Manoj

  • Report for cancelled jobs

    Hi ,
    I have a requirement in which I have to create a report that should pickup all the cancelled CRM marketing jobs (due to whatever reason) based on on job name, copy them and restart them.
    In your selection screen, you will give the cancelled job name (wildcard acceptable..like ZE00*) and a radio button to show the cancelled job list and copy the jobs.
    Could anyone guide me on how to go ahead with this report?
    Regards,
    Mohit

    Hi,
    in table TBTCO and TBTCP you have all jobs with current status. You can search them by name.
    Selected jobs you can "popup_with_table" FM. Then you need to use fm to submit job in ackground;
    'JOB_OPEN', 'JOB_SUBMIT' and 'JOB_CLOSE'.
    Good luck !

  • I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    What file format did you export it to?

  • How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

    Hi
    How To Scheduled A Job Through ABAP Report In back end  Of CRM when i click on "Approve" Button in WEBUI  From result list.
    As per My requirement I have a Search View and Result View
    In Search View I have  Below Fields
    ITC Vendor ID    
    Claim Status
    User status (date status changed)
    Model
    Serial Number
    Date completed of Service Completion
    Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
    In the Result View I need to Add one Button As "Approve"
    When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
    "Approve  Claim Job Has Started In Background  
    Note: Only Claims Which are in Submitted  Status  Will be  Approved. you May Close This Window"
    In SAP CRM System  Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
    In the Back Ground ABAP Report which will validate based on Result List Records"
    In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
    I need to collect all records from Result list and validate Those Records who's Status in "Submitted
    1)Sort all the claims based on ITC Vendor ID.
    2)Grouped all the submitted claims against each ITC Vendor ID from the search result
    3)Change the status of the selected submitted claims to Approved.
    4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
    ‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
    5)Sending Email to each IRC.
    6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
    7)Store the file in the Application Server AL11 in .csv format
    Please Find Attachement For Reference.
    1)ITC Claim Screen Shot
    2)Screen Shot For Attachment
    Thanks
    Raj

    Hi,
    You can add the following code in on approve method to show popup to the user,
    IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
        REFRESH lt_buttons.
        lss_button-id  = 'btnyes'.
        lss_button-text = 'YES'.
        lss_button-on_click = 'YES'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        lss_button-id  = 'btnno'.
        lss_button-text = 'NO'.
        lss_button-on_click = 'NO'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        CALL METHOD comp_controller->window_manager->create_popup_2_confirm
          EXPORTING
            iv_title          = 'ATTENTION'
            iv_text           = 'Are you sure you want to edit this document?'
            iv_btncombination = '99'
            iv_custombuttons  = lt_buttons
          RECEIVING
            rv_result         = req_edit.
        req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
        req_edit->open( ).
        RETURN.
      ELSE.
        lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
        lv_outbound = lr_node->get_event_name( ).
    *  CLEAR ptc_pricing_status.
    *    lv_outbound = req_edit->get_fired_outbound_plug( ).
        IF lv_outbound = 'YES'.
    you can use the submit report code here and you can al the validations here
        ELSE. " No
    if user clicks no nothing to do..
        ENDIF.
        CLEAR req_edit.
      ENDIF.
    Best Regards,
    Dharmakasi.

  • Schedule jobs witj job open, submit and close

    Hi gurus,
    I need to know if there is any way to schedule various jobs using the FM job_open job_submit and job_close. Like schedule the first job for a date and a hour and schedule others jobs to run after the first job sequential.
    Its this possible?
    Thk in advance

    Hi
    see the sample code for the Job scheduling using the fun modules
      IF p_bjob = 'X'.
        CONCATENATE sy-cprog sy-datum sy-uzeit
                    INTO jobname SEPARATED BY '_'.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = jobname
          IMPORTING
            jobcount         = jobcount
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          IMPORTING
            out_archive_parameters = arc_params
            out_parameters         = print_params
            valid                  = valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF valid = chk.
          SUBMIT yREP  WITH s_kunnr IN s_cust
                          AND RETURN
                          USER               sy-uname
                          VIA JOB            jobname
                          NUMBER             jobcount
                          TO SAP-SPOOL
                          SPOOL PARAMETERS   print_params
                          ARCHIVE PARAMETERS arc_params
                          WITHOUT SPOOL DYNPRO.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = jobcount
              jobname              = jobname
              strtimmed            = 'X'
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              invalid_target       = 8
              OTHERS               = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            MESSAGE i029 WITH jobname.
          ENDIF.
        ELSE.
          MESSAGE s000 WITH text-003.
          STOP.
        ENDIF.
      ENDIF.
    Regards
    anji

  • Problems creating background job for program (job open, submit and close)

    Hi gurus,
    im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
    The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
    What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
    Below goes my code,
    any ideas will be rewarded
      CLEAR: stdt_modify_type, stdt_output.
      CALL FUNCTION 'BP_START_DATE_EDITOR'
           EXPORTING
                stdt_dialog                    = 'Y'
                stdt_input                     = stdt_input
                stdt_opcode                    = 14
           IMPORTING
                stdt_modify_type               = stdt_modify_type
                stdt_output                    = stdt_output
           EXCEPTIONS
                fcal_id_not_defined            = 1
                incomplete_last_startdate      = 2
                incomplete_startdate           = 3
                invalid_dialog_type            = 4
                invalid_eventid                = 5
                invalid_opcode                 = 6
                invalid_opmode_name            = 7
                invalid_periodbehaviour        = 8
                invalid_predecessor_jobname    = 9
                last_startdate_in_the_past     = 10
                no_period_data_given           = 11
                no_startdate_given             = 12
                period_and_predjob_no_way      = 13
                period_too_small_for_limit     = 14
                predecessor_jobname_not_unique = 15
                startdate_interval_too_large   = 16
                startdate_in_the_past          = 17
                startdate_is_a_holiday         = 18
                startdate_out_of_fcal_range    = 19
                stdt_before_holiday_in_past    = 20
                unknown_fcal_error_occured     = 21
                no_workday_nr_given            = 22
                invalid_workday_countdir       = 23
                invalid_workday_nr             = 24
                notbefore_stdt_missing         = 25
                workday_starttime_missing      = 26
                no_eventid_given               = 27
                OTHERS                         = 28.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        MOVE 'X' TO gv_flag.
      ENDIF.
      DATA jobname LIKE tbtcjob-jobname.
      DATA jobcount LIKE tbtcjob-jobcount.
      DATA job_release LIKE  btch0000-char1.
      DATA job_imediate TYPE c.
      CLEAR: jobname, jobcount, job_release.
      CONCATENATE 'MAPAEXEC' sy-uname sy-datum
                   INTO jobname SEPARATED BY space.
      CALL FUNCTION 'JOB_OPEN'
           EXPORTING
                jobname          = jobname
           IMPORTING
                jobcount         = jobcount
           EXCEPTIONS
                cant_create_job  = 1
                invalid_job_data = 2
                jobname_missing  = 3
                OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE i003(zmapas).
        EXIT.
      ENDIF.
      SUBMIT z_mapa_execucao_orcamental
             VIA JOB jobname NUMBER jobcount
             WITH ano EQ ano
             WITH so_perio IN so_perio
             WITH so_date IN so_date
             WITH so_org EQ so_org
             WITH so_num IN so_num
             AND RETURN.
      IF stdt_output-startdttyp EQ 'I'.
        CLEAR job_imediate.
        job_imediate = 'X'.
      ENDIF.
      CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                calendar_id                 = stdt_output-calendarid
                event_id                    = stdt_output-eventid
                event_param                 = stdt_output-eventparm
                event_periodic              = stdt_output-periodic  "?
                jobcount                    = jobcount
                jobname                     = jobname
                laststrtdt                  = stdt_output-laststrtdt
                laststrttm                  = stdt_output-laststrttm
                prddays                     = stdt_output-prddays  "??
                prdhours                    = stdt_output-prdhours  "?
                prdmins                     = stdt_output-prdmins  "??
                prdmonths                   = stdt_output-prdmonths
                prdweeks                    = stdt_output-prdweeks  "?
                predjob_checkstat           = stdt_output-checkstat
                pred_jobcount               = stdt_output-predjobcnt
                pred_jobname                = stdt_output-predjob
                sdlstrtdt                   = stdt_output-sdlstrtdt
                sdlstrttm                   = stdt_output-sdlstrttm
                strtimmed                   = job_imediate
                targetsystem                = stdt_output-instname
                start_on_workday_not_before = stdt_output-notbefore
                start_on_workday_nr         = stdt_output-wdayno
                workday_count_direction     = stdt_output-wdaycdir
           IMPORTING
                job_was_released            = job_release
           EXCEPTIONS
                cant_start_immediate        = 1
                invalid_startdate           = 2
                jobname_missing             = 3
                job_close_failed            = 4
                job_nosteps                 = 5
                job_notex                   = 6
                lock_failed                 = 7
                OTHERS                      = 8.
      IF sy-subrc <> 0.
        MESSAGE i003(zmapas).
        EXIT.
      ELSE.
        MESSAGE i004(zmapas) WITH jobname.
      ENDIF.
    Thanks in advance,
    Best Regards
    João Martins

    Hello João.
    In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
    As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
    Check this code:
    CALL FUNCTION 'JOB_OPEN'
          EXPORTING
               jobname          = w_jobname
          IMPORTING
               jobcount         = w_jobcount
          EXCEPTIONS
               cant_create_job  = 1
               invalid_job_data = 2
               jobname_missing  = 3
               OTHERS           = 4.
    CHECK sy-subrc = 0.
    CLEAR seltab_wa.
    MOVE: t_jobs-param TO seltab_wa-selname,
    t_processar-line+34 TO seltab_wa-low.
    APPEND seltab_wa TO seltab.
    seltab_wa-selname = 'P_LOJA'.
    seltab_wa-low = t_processar-ficheiro+7(4).
    APPEND seltab_wa TO seltab.
    *** Submete o programa para o JOB
    SUBMIT (t_jobs-repid)
      WITH  SELECTION-TABLE seltab
      USER sy-uname
       VIA JOB w_jobname NUMBER w_jobcount
       AND RETURN.
    *** Encerra o JOB
      l_hora = sy-uzeit.
      ADD 60 TO l_hora.
    CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
          jobcount           = w_jobcount
          jobname           = w_jobname
          sdlstrtdt            = sy-datum
          sdlstrttm           = l_hora
          targetserver       = w_servidor
       IMPORTING
          job_was_released     = l_liberado
       EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          OTHERS               = 8.
    Regards.
    Valter Oliveira.

  • Jobs with a startevent and starttime

    hello,
    I'd like to plan a job in an abap program which is started when an event is raised or a certain timespan
    has passed.
    When planing the job by using the functionmodules job_open, job_submit and and job_close I can supply an event and a startdate but the implementation of the functionmodules ignores the event when the startdate parameter is supplied.
    Is there a workaround to enable event triggered jobs with a startdate which is used if the event is not raised within a certain timespan or do I really hav to use 2 jobs?
    thanks
    Roman

    Hello Roman
    I think you have to use 2 jobs, but if you use 2 jobs with the same program the program may run twice.
    You could create 1 job with your program that is started by event and 1 job with a startdate/time that runs a program that raise the event.
    best regards
    Thomas Madsen Nielsen

  • Batch job

    Hi I am working on batch job .
    my program is printing invoice as well as downloading and I have run this program in batch,
    I am using the FM job_open , job_submit and job_close.
    but it is failing in job_submit with sy-subrc eq 1 .
    giving me error bad print parameter , I haven;t done this before.
    I think it should be option.
    CALL FUNCTION 'JOB_SUBMIT'
        EXPORTING
          authcknam = SY-UNAME  "tbtcjob-authcknam
          jobcount  = tbtcjob-jobcount
          jobname   = p_jobnam
          language  = sy-langu
           report    = c_reprot
          variant   = pvariant
        EXCEPTIONS
          OTHERS    = 01.
    could anybody pls guide me why it is so???
    Regards.
    Kusum.

    you can below code
    OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
                                WITH SMART LINEFEED.
        IF sy-subrc EQ 0.
          WHILE sy-subrc IS INITIAL.
            READ DATASET gv_file INTO gwa_header_file.
            IF sy-subrc NE 0.
              EXIT.
            ELSE.
              APPEND gwa_header_file TO gt_header_file.
            ENDIF.
          ENDWHILE.
          CLOSE DATASET gv_file.
        ENDIF.
      ENDIF.

  • Job Scheduling error

    Hi Experts,
    I have a critical requirement. I need to kick off 3 interfaces from 1 report each of which will update the Oracle database.
    I've used JOB_OPEN and JOB_CLOSE function modules and using SUBMIT <report> VIA JOB <jobname> NUMBER<jobnumber> AND RETURN. My problem is that these 3 reports are not getting executed, means they are not updating the Oracle database when they are kicked-off from the new program.
    But if i run each of them individually with same test data, it runs perfectly and updates the Oracle database. I tried to debug, it returns before going into START-OF-SELECTION event.
    Any help will be appreciated
    Thanks
    Prateek

    The VIA JOB addition also loads the program accessed in a separate internal mode when the SUBMIT statement is executed and the system performs all the steps specified before START-OF-SELECTION. This means the events LOAD-OF-PROGRAM and INITIALIZATION are triggered and selection screen processing is performed. If the selection screen is not processed in the background when VIA SELECTION-SCREEN is specified, the user of the calling program can eidit it and schedule the program accessed in the background request using the function Place in Job. If the user cancels selection screen processing, the program is not scheduled in the background job. In both cases, execution of the program executed is completed after selection screen processing and the system returns to the calling program due to the AND RETURN addition.
    Hope you got it.

  • Background jobs

    Hi,
            We can schedule the programs or transactions in background through SM36 and we can see the status through SM37.Then what is the use of FM's JOb_open,Job_submit and Job_close.When we will use these FM's.
    Can anybody tell me the difference between these two methods for scheduling the jobs in background....with sample code if possible
    Thanks & Regards,
    Rakesh.

    hi,
    chk this,
    call funcatio.
    ****Open a job to submit the Post Program into
    call function 'JOB_OPEN'
    exporting
    jobname = jobname
    importing
    jobcount = jobcount
    exceptions
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    others = 4.
    if sy-subrc 0.
    raise job_open_failed.
    endif.
    submit zefu_currency_load_callbak_ack
    via job jobname
    number jobcount
    with com_num = com_num
    with relay_nu = relay_num
    and return.
    if sy-subrc 0.
    raise job_step_failed.
    endif.
    ****Close the Job and start it immediately
    call function 'JOB_CLOSE'
    exporting
    jobcount = jobcount
    jobname = jobname
    strtimmed = 'X'
    exceptions
    cant_start_immediate = 1
    invalid_startdate = 2
    jobname_missing = 3
    job_close_failed = 4
    job_nosteps = 5
    job_notex = 6
    lock_failed = 7
    others = 8.
    if sy-subrc 0.
    raise job_close_failed.
    endif.
    Also,
    Create a Variant for the Program and
    Schedule JOB in background:
    Go to SM36 create a Job
    enter Program and Variant for that program in STEP..
    click on Start Condition
    Click on DATE and TIME enter date scheduled Start and END times
    click on Period Values
    Click on HOURLY/WEEKLY etc
    CLick on RESTRICTIONS also to use further criteria.
    so your job will be scheduled and run as per your requirement.
    and in SM37 Transaction check the status of that JOB
    Check this link for scheduling jobs..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
    You can also use the fun modules JOB_OPEN,JOB_CLOSE etc for job
    scheduling.
    hope this helps.
    regs,
    hema.

  • How to schedule a job in another system.

    Hi,
    Now i have an ABAP program, which run in system ABC, client 001. i want to schedule a job in the program, with the function modules JOB_OPEN, JOB_SUBMIT, and JOB_CLOSE. But this job should run in ABC/002.
    How to write code?
    Who can help me on the requirement, or provide me another new solution except event trigger?
    Thanks & Best Regards,
    Johnney

    Here is the code. It works fine..
    FUNCTION Z_F_TRIGGER_REPORT.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_PROG) TYPE  D010SINF-PROG
    *"     VALUE(I_VARIANT) TYPE  VARIS-VARIANT
    *"     VALUE(I_MODE) TYPE  CHAR01
    *"  EXPORTING
    *"     VALUE(E_SUBRC) TYPE  SYST-SUBRC
    *"     VALUE(E_MSG) TYPE  CHAR80
    Functio ID :  Z_F_TRIGGER_REPORT
    TITLE      :  Report Trigger Tool
    Create Date:  15.03.2004
    Author     :  Denis Vieira
    Ownership : For the exclusive use of the Procter & Gamble Company
    Description:
    The purpose of this function module is to trigger programs
    requested remotely.
    AUTHORIZATION CHECKS
    OBJECT               AUTHORITY FIELDS         ABAP FIELDS
                     |                       |
    CHANGE HISTORY                                                      *
      DATE      |  Name  | Description                       | Reference *
    29.Jun.2006 | BA4513 | Unicode conversion and upgrade    | SPK290606
                |        | to My SAP ERP                     |
    **eject.
    Check if selected program exists in the destination file
      SELECT SINGLE  SUBC
             FROM    D010SINF
             INTO    D010SINF-SUBC
             WHERE   PROG    EQ  I_PROG
             AND     R3STATE EQ  C_A.
      IF SY-SUBRC NE C_0.
        MOVE  C_2                                               TO E_SUBRC.
        MOVE 'Report does not exist in destination system'(M01) TO E_MSG.
        EXIT.
      ENDIF.
    Check if program request is an executable program
      IF D010SINF-SUBC NE C_1.
        MOVE  C_2                                               TO E_SUBRC.
        MOVE 'Report is not an executable program'(M02)         TO E_MSG.
        EXIT.
      ENDIF.
    Check if selected variant exists in the destination file
      SELECT COUNT( * )
           FROM  VARIS
           INTO  W_COUNT
           WHERE REPORT  EQ I_PROG
           AND   VARIANT EQ I_VARIANT
           AND   DYNNR   EQ C_1000.
      IF W_COUNT EQ C_0.
        MOVE  C_2                                                TO E_SUBRC.
        MOVE 'Variant does not exist in destination system'(M03) TO E_MSG.
        EXIT.
      ENDIF.
      IF I_MODE EQ C_B.
        PERFORM 0100_BACKGROUND USING     I_PROG I_VARIANT
                                CHANGING  E_MSG  E_SUBRC.
      ELSE.
        PERFORM 0200_FOREGROUND USING     I_PROG I_VARIANT
                                CHANGING  E_MSG  E_SUBRC.
      ENDIF.
    ENDFUNCTION.
    *eject
    *&      Form  0100_background
    Executes Selected program in BackGround Mode VIA JOB
    *Block commented from here SPK290606
    *FORM 0100_BACKGROUND USING     L_PROG L_VARIANT
                        CHANGING  L_MSG  L_SUBRC.
    *Block commented till here SPK290606
    *Block added from here SPK290606
    FORM 0100_BACKGROUND USING    L_PROG    LIKE D010SINF-PROG
                                  L_VARIANT LIKE VARIS-VARIANT
                         CHANGING L_MSG     TYPE  CHAR80
                                  L_SUBRC   TYPE  SYST-SUBRC.
    *Block added till here SPK290606
      CONCATENATE C_AREA
                  C_UND
                  L_PROG
                  C_UND
                  SY-DATUM
                  C_UND
                  SY-UZEIT
                  INTO W_JOBNAME.
    Create a JOB and Get the Number for further execution
      CALL FUNCTION 'JOB_OPEN'
           EXPORTING
                JOBNAME  = W_JOBNAME
           IMPORTING
                JOBCOUNT = W_JOBCOUNT.
      IF SY-SUBRC NE C_0.
        MOVE  C_2                       TO L_SUBRC.
        MOVE 'Error opening job'(M07)   TO L_MSG.
        EXIT.
      ENDIF.
    Submit program
      SUBMIT (L_PROG)
        USING SELECTION-SET L_VARIANT
        VIA JOB W_JOBNAME NUMBER W_JOBCOUNT
        AND RETURN.
      IF SY-SUBRC NE C_0.
        MOVE  C_2                        TO L_SUBRC.
        MOVE 'Error Submitting Job'(M06) TO L_MSG.
        EXIT.
      ENDIF.
    Closes job to start its processing
      CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                JOBCOUNT  = W_JOBCOUNT
                JOBNAME   = W_JOBNAME
                STRTIMMED = 'X'.
      IF SY-SUBRC NE C_0.
        MOVE  C_2                       TO L_SUBRC.
        MOVE 'Error closing job'(M08)   TO L_MSG.
        EXIT.
      ENDIF.
      MOVE  C_0                                          TO L_SUBRC.
      MOVE 'Program Submitted in Background Mode'(M09)   TO L_MSG.
    ENDFORM.
    *eject
    *&      Form  0200_foreground
    Executes Selected program in ForeGround Mode VIA Submit
    *Block commented from here SPK290606
    *FORM 0200_FOREGROUND USING     L_PROG L_VARIANT
                        CHANGING  L_MSG  L_SUBRC.
    *Block commented till here SPK290606
    *Block added from here SPK290606
    FORM 0200_FOREGROUND USING    L_PROG    LIKE D010SINF-PROG
                                  L_VARIANT LIKE VARIS-VARIANT
                         CHANGING L_MSG     TYPE  CHAR80
                                  L_SUBRC   TYPE  SYST-SUBRC.
    *Block added till here SPK290606
      SUBMIT (L_PROG) USING SELECTION-SET L_VARIANT
             EXPORTING LIST TO MEMORY AND RETURN.
      IF SY-SUBRC EQ C_0.
        MOVE  C_0                                 TO L_SUBRC.
        MOVE 'Report submitted successfully'(M04) TO L_MSG.
      ELSE.
        MOVE  C_2                                 TO L_SUBRC.
        MOVE 'Error submitting report'(M05)       TO L_MSG.
      ENDIF.
    ENDFORM.

  • How to schedule cross-client job?

    Hi Experts,
    Now I'm running in client 001 and want to schedule a job which should run in client 002.
    I check the Function Module JOB_OPEN, JOB_SUBMIT, and JOB_CLOSE. There is no client-related parameter in the importing.
    Suppose the report name is ABC.
    Could someone please provide support in the problem?
    Thanks in advance,
    Best Regards, Johnney.

    hi..
    may be you can get your work done from the link
    http://help.sap.com/saphelp_46c/helpdata/en/fa/096ee5543b11d1898e0000e8322d00/frameset.htm
    regards

  • Function Module to Release Scheduled Jobs

    Dear All,
    I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
    Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
    Regards,
    kartik

    Dear Mr. Parupalli,
    That solved my problem. Thank you.
    Regards,
    kartik

Maybe you are looking for

  • Export/Import and Client Copy

    Hi All, Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other. Regards Rajesh

  • Aperture v. 3.1.1 glitching and crashing with iOS 10.7.5 update?

    It is crashing every time I use a brush tool or do anything too quickly in general. I just updated my mac yesterday and that is when this started. I have tried restarting my computer, checking for updates, etc.

  • File.encoding - Help

    Hi, We are converting German and English DATA to XML. And German data (UTF-8) is running through the system fine if I logged and tested. But strangely its giving ?? chars when I run as a different user. (Sun Solaris / JDK 1.4) When I looks at the pro

  • HP f2105 monitor

    Monitor will suddenly go black, have to turn off monitor and then back on to recieve error message that DVI has no input. Cords are all attached in correct places but still have this problem.  Any ideas

  • Does apple provide enterprise software management?

    Hi there, Does Apple provide software for enterprise management.  I have worked with BB 10 and Air-Watch.  however before we go spend money on 3rd Party tools, I was interested in knowing whether apple might have something like this under the covers.