ULIMITS Failed in RDA
Hi All,
We are planning to install 10gR2 in one of the production boxes and i ran the RDA and in the rda output every thing is fine but ULIMITS is failed. Is it ok to goahead and install 10gR2 or i have to set the ulimits first???
OUTPUT FROM RDA IS
Rule A00190: ulimits OK?
Description
This rule verifies that the ulimit settings are adequate for installing Oracle Database 10g.
Unmatched Actions StackTooSmall
NoFilesTooSmall == ulimitOK
Default Action
Result: FAILED
Value: StackTooSmall
NoFilesTooSmall
Review the ulimit settings and check the recommended values from the Oracle Database Installation Guide 10g Release 2 (10.2) for Solaris before installing the software. Return Value Action
TimeNotDefined ulimit(TIME) is not defined
TimeTooSmall Increase the ulimit(TIME) to unlimited
FileNotDefined ulimit(FILE) is not defined
FileTooSmall Increase the ulimit(FILE) to unlimited
DataNotDefined ulimit(DATA) is not defined
DataTooSmall Increase the ulimit(DATA) to a minimum of 1048576
StackNotDefined ulimit(STACK) is not defined
StackTooSmall Increase the ulimit(STACK) to a minimum of 32768
NoFilesNotDefined ulimit(NOFILES) is not defined
NoFilesTooSmall Increase the ulimit(NOFILES) to a minimum of 4096
VmemoryNotDefined ulimit(VMEMORY) is not defined
VmemoryTooSmall Increase the ulimit(VMEMORY) to a minimum of 4194304
KK
Ulimits are OS limits which can restrict the number of open files, or the file size, or other OS attributes.
You have a choice ....
1. setup the OS correctly as per the Oracle recommendations and avoid known problems
or
2. ignore the Oracle recommendations, wait for the database to crash, then spend lots of time debugging the problem in the future.
Similar Messages
-
Hi All
I am trying to collect RDA for Cash Management.
I ran Oracle Diagnostic tool using SYSADMIN.
selected Cash Management filled the form providing Responsibility ID, Application Shortname , apps username and password.
After running the test the output file displayed following error.
To run this report successfully is there any patch which I need to apply.
------------- Test Result Summary -------------
Total Tests: 1
Success Count: 0
Error count: 1
Test Names Status
oracle.apps.izu.general.diag.RDAACT Failed
----------- End Test Result Summary -----------
============= Test Result =============
Test Class Name: oracle.apps.izu.general.diag.RDAACT
Application Code: CE
Group Name: System Snapshot
Status: Failed
Time: 2010-05-27 14:15:17.0
Time Consumed: 9705
Test Version: 120.27.12000000.4
Tool Version: 120.25.12000000.5
Install Version: Base: none Upgrade: none
Mode: 1
Index: 1
Tested Class Name Tested Class Version
oracle.apps.jtf.regress.qatool.base.DiagBase 120.0.12000000.1
oracle.apps.jtf.regress.qatool.base.HRInfo 120.0.12000000.1
oracle.apps.jtf.regress.qatool.base.OSUtility 120.0.12000000.1
oracle.apps.jtf.regress.qatool.base.SessionHelper 120.0.12000000.1
oracle.apps.jtf.regress.qatool.base.YesNoLov 120.0.12000000.1
oracle.apps.jtf.regress.qatool.fnd.FNDUtility 120.0.12000000.9
Input Names Input Values
Responsibility ID 51235
Application Shortname CE
Mask sensitive data
APPS Schema Username apps
APPS Schema Password ******
Diagnostic Test Executed By SYSADMIN
Dependent Class Names
Report:
Oracle Diagnostics Information Product Installation Status and Patchset Level Parameters
ACT Report
Database Information [Top]
Server = prod-db
Version = Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
Name/SID = PROD
Language = AMERICAN
Character Set = AR8ISO8859P6
Application Information [Top]
Release = 12.0.4
Application = Cash Management (260) with status of INSTALLED
Responsibility = KGLL CM Supervisor (51235)
Security Group = Standard
MultiOrg Flag = Y
Oracle Diagnostics Information [Top]
Patch OD for R12 RUP3 [12.0.3] (6154018) is installed
Patch Oracle Diagnostics Tools, R12.IZU.A.DELTA.4 (6497339) is installed
Metalink Document Id = 420427.1
Product Installation Status and Patchset Level [Top]
Application Short Name Id Installation Status Patch Level
Application Object Library FND 0 Installed R12.FND.A.4
System Administration SYSADMIN 1 Installed Not Available
2 rows retrieved
Parameters [Top]
Username = SYSADMIN
Responsibility = KGLL CM Supervisor (51235)
Application Shortname = CE
Mask sensitive data = No
APPS Schema Username = apps
ACT Report [Top]
ERROR - RDA report html file 'RDA_ACT_report.htm' could not be found
ACTION - This error may occur if the RDA execution timed out or if the report has already been executed in another session but has not completed. If this is not the case, make sure the permissions are correct on all application directories so that report output can be generated.
ATTENTION - The following information may be required to assist in resolving the above error
RDA Data Collection Started 27-May-2010 14:15:10
Processing Initialization module ...
Processing CFG module ...
Processing ACT module ...
Enter APPS user password:
Please re-enter it to confirm:
Empty string. Please try again...
Enter APPS user password:
Please re-enter it to confirm:
Empty string. Please try again...
Enter APPS user password:
Please re-enter it to confirm:
Failure to match a valid entry on 3 attempts
Enter the password for 'APPS@PROD':
Please re-enter it to confirm:
Empty string. Please try again...
Enter the password for 'APPS@PROD':
Please re-enter it to confirm:
Empty string. Please try again...
Enter the password for 'APPS@PROD':
Please re-enter it to confirm:
Failure to match a valid entry on 3 attempts
RDA-00508: Null password given; logon denied in S500ACT near line 373
If you are experiencing any issues regarding this diagnostic test, please use Metalink to log an iTAR (Service Request) for product "Support Diagnostics Project" (ID=1332).
If you have any question related to support diagnostic tools (installation, execution, usage or availability), you can ask us using the Support Diagnostics Project forum on Metalink.
We would also appreciate your feedback regarding the usefulness of this test, however, there will be no replies to feedback emails.
Error Message: 1 error and 0 warnings were found.
Fix Info: Please review the test summary for more information.
============ End Test Result ============Hi;
Enter APPS user password:
Please re-enter it to confirm:
Failure to match a valid entry on 3 attempts
RDA-00508: Null password given; logon denied in S500ACT near line 373can you connect as apps to your db from SQL prompt? Coz you have error, so something wrong
Please check:
RDA Documentation Index [ID 414966.1]<<Troubleshooting Guide
Abt the persmission i dont know where to look.Be sure your applmgr user has w/r permission to related path, also be sure /tmp and RDA log location
Regard
Helios -
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi -
Polling adapter fails unexpectedly
Trying to test ESB polling service.Created sample polling service that check for database table changes. Service does not work properly, found error message in log.xml file:
JCA inbound adapter service listener for "Fulfillment.TestPooler_RS.receive" with endpoint ID "[TestPooler_ptt::receive(CustomerCollection)]" has been requested to shutdown by Resource Adapter due to fatal error. Reason : ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [TestPooler], Descriptor name: [TestPooler.Customer]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Exception [TOPLINK-6024] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException
Exception Description: Modify queries require an object to modify.
Query: UpdateObjectQuery(null).
What can be cause of this error?Hi alex,
Cause of problem
Both OC4J running BPEL and the database adapter reached the maximum number of connections and were unable to establish new ones.
The reason for the problem is a database adapter Bug 5595347.
According to Bug 5595347, the database adapter might leave open connections behind.
The fix for Bug 5595347 is included in Patch 5638122.
Solution
To implement the solution, please execute the following steps:
Apply Patch 5638122.
References
Bug 5595347 - ORIONCMTCONNECTION NOT CLOSED IN ORABPEL~OC4J_BPEL~DEFAULT_ISLAND~1
Note 314422.1 - Remote Diagnostic Agent (RDA) 4 - Getting Started
Patch 5638122 - MERGE LABEL REQUEST ON TOP OF 10.1.2.0.2 FOR BUGS 5149866 5595347 5205630
Cheers,
Abhi... -
Rapidwiz fails on database step for 12.1.1 on Oracle Linux 5.7
I am trying to install Oracle EBS 12.1.1 on Oracle Linux 5.7 64 bit platform.
The issue is that after I followed the requirements including set kernel parameters by using the oracle-validated RPM package, the install fails on database creation step.
Below are logs:
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ebsdb01:1526:VIS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebsdb01)(PORT=1526))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebsdb01)(PORT=1526))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
I checked network interfaces and can ping the hosts. Here is my network /etc/hosts file:
127.0.0.1 localhost.localdomain localhost
112.2.2.10 ebsapp01.local.com ebsapp01
112.2.2.11 ebsapp02.local.com ebsapp02
112.2.2.20 ebsdb01.local.com ebsdb01
Any ideas how to solve this issue? I even used latest release of Rapid Install wizard and no luck.RDA is a diagnostic script for looking at requirements and settings from MOS.
I run this way:
perl rda.pl -T hcve
with results:
Test "Oracle E-Business Suite Release 12 (12.1.1) Preinstall (Linux x86 and x86_64)" executed at 01-Feb-2013 20:05:23
Test Results
~~~~~~~~~~~~
ID NAME RESULT VALUE
====== ==================== ======= ==========================================
A00100 OS Type RECORD OL5 64
A00200 OS Certified? PASSED Adequate
A00210 RPM OL4/32 OK? SKIPPED Not Oracle Linux 4 32-bit
A00220 RPM OL4/64 OK? SKIPPED Not Oracle Linux 4 64-bit
A00230 RPM OL5/32 OK? SKIPPED Not Oracle Linux 5 32-bit
A00240 RPM OL5/64 OK? FAILED [libstdc++-devel(i386)] not installed
A00241 RPM OL6/32 OK? SKIPPED Not Oracle Linux 6 32-bit
A00242 RPM OL6/64 OK? SKIPPED Not Oracle Linux 6 64-bit
A00250 RPM RH3/32 OK? SKIPPED Not Red Hat Enterprise Linux 3 32-bit
A00270 RPM RH4/32 OK? SKIPPED Not Red Hat Enterprise Linux 4 32-bit
A00280 RPM RH4/64 OK? SKIPPED Not Red Hat Enterprise Linux 4 64-bit
A00290 RPM RH5/32 OK? SKIPPED Not Red Hat Enterprise Linux 5 32-bit
A00300 RPM RH5/64 OK? SKIPPED Not Red Hat Enterprise Linux 5 64-bit
A00301 RPM RH6/32 OK? SKIPPED Not Red Hat Enterprise Linux 6 32-bit
A00302 RPM RH6/64 OK? SKIPPED Not Red Hat Enterprise Linux 6 64-bit
A00310 RPM SLES9/32 OK? SKIPPED Not SuSE Linux Enterprise 9 32-bit
A00320 RPM SLES9/64 OK? SKIPPED Not SuSE Linux Enterprise 9 64-bit
A00330 RPM SLES10/32 OK? SKIPPED Not SuSE Linux Enterprise 10 32-bit
A00340 RPM SLES10/64 OK? SKIPPED Not SuSE Linux Enterprise 10 64-bit
A00342 RPM SLES11/64 OK? SKIPPED Not SuSE Linux Enterprise 11 64-bit
A00350 Motif Link PASSED MotifLinkOK
A00360 ENV Variable Unset SKIPPED Not SuSE Linux Enterprise 10
A00370 Got Software Tools? PASSED tools_found
A00400 IP Address RECORD 122.2.2.2
A00410 Domain Name RECORD local.com
A00420 DNS Lookup FAILED nslookup IP_address
A00430 /etc/hosts format PASSED Adequate IPv4 entry
A00440 SysNetw File PASSED SysNetOK
A00450 NoNetwProf File PASSED OK
A00460 DNS Settings RECORD DNSOptionsOK
A00470 Net Service Access? PASSED NonExist
A00480 Port 6000 PASSED Free
A00500 Kernel Params OK? PASSED KernelOK
A00510 Port Range OK? FAILED HighValue
A00520 Limit Processes PASSED Adequate
A00530 Limit Descriptors FAILED Less than 65536
A00600 ApplTierDirectory RECORD /d01
A00610 A_T Valid? PASSED ATexists
A00620 A_T Permissions OK? PASSED CorrectPerms
A00630 A_T Disk Space PASSED OK
A00640 Space in tmp PASSED AvailableI do not understand why I have to ask for the Doc ID 3 times!
If you are running the one in (RDA 4 - Health Check / Validation Engine Guide [ID 250262.1]), then I believe it is only available for "Linux-x86 Platforms" (32-bit).
2) I notice issue with DNS configuration:
[root@ebsdb01 rda]# nslookup 122.2.2.2
Server: 122.2.2.2
Address: 122.2.2.22#5
** server can't find .in-addr.arpa.: NXDOMAINThis is a network issue, please check with your network admins/team.
3)
So this leads me to my next question, when I use nslookup to search the domain on the DNS server for the host, it resolves successfully. BUT, when I run nslookup against the IP address
it cannot find it in DNS. Would this be the root cause of why my installation keeps failing? I have verified checksums and software is fine. I am still missing a couple RPMs but do not believe this is what causing the install to fail yet in light of the network connection errors that Rapidwiz keeps throwing at me.All network files/settings can be found in (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]).
Thanks,
Hussein -
Urgent : Generation of file "application".xml fails and deploys aborted
Hi,
I recently took over an application (called RDAS) and downloaded if from DTR. But this didnt work well (all sources files have been downloaded, but lots of models and custom controllers were missing in the webdynpro perspective). This has been fixed well by modifying manually file Rdas.wdcomponent
I just found out that in my component, a window and it's view are also missing (no links with any other windows or views of my application). This window just contains a view and acts as a popup (no navigation link or so with the rest of my component). I modified files Rdas.wdcomponent and RdasInterface.wdcomponentinterface and it builds well. No errors. I can now find my missing window and view in the webdynpro perspective.
But since then I can not deploy anymore. I get the following errors:
Web Dynpro Generation: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to parse XML document containing VMO=com.alstom.power.rdas.wd.Rdas., D:/Workspace_JDI/0/DCs/power.alstom.com/rdaswd/_comp/gen_wdp/configuration/Applications/com.alstom.power.rdas.wd.Rdas/Rdas.xml
And when I check in the generated files, the xml file associated to the application is not genetared anymore.
Any ideas?
Points rewarded for any help
Thanks
YannHi,
Finally I figured out what was wrong.
An entry was missing in file RDAS.wdcomponent (views have to be inserted in the views list and also in the components list).
Do I deserve points?
I think so -
FAILED nslookup host.domain
I am performing an R12.2 Vision Installation on SLES 11 SP3 for VMWARE.
Reference RDA - Health Check / Validation Engine Guide (Doc ID 250262.1)
I executed the " ./rda.sh -T hcve " check to perform the Oracle E-Business Suite Release 12 (12.2.0) Preinstall (Linux x86_64).
I receive this failure: " A03550 DNS Lookup FAILED nslookup host.domain "
Can you help direct me to why I may be receiving this error?
more /etc/hosts ------My etc hosts I believe is setup correctly.
# IP-Address Full-Qualified-Hostname Short-Hostname#
127.0.0.1 localhost.localdomain localhost
192.168.0.121 Platinium2.platinumesol.com Platinium2
Platinium2:~ # ping Platinium2 -----Ping resolves correctly to what is in /etc/hosts
PING Platinium2.platinumesol.com (192.168.0.121) 56(84) bytes of data.----This is the correct IP
64 bytes from Platinium2.platinumesol.com (192.168.0.121): icmp_seq=1 ttl=64 time=0.024 ms>
When I do an nslookup of the host server that I am working on :
Platinium2:/pwoll/rda # nslookup Platinum
Server: 209.18.47.61
Address: 209.18.47.61#53
Non-authoritative answer:
Name: Platinum
Address: 198.105.254.240
Name: Platinum
Address: 198.105.244.240
Platinium2:~ # nslookup -d2
setup_system()
create_search_list()
ndots is 1.
copy_server_list()
make_server(209.18.47.61)
make_server(209.18.47.62)
make_server(192.168.0.1)
>
cat /etc/resolv.conf
search platinumesol.com
nameserver 209.18.47.61
nameserver 209.18.47.62
nameserver 192.168.0.1
options attempts:5
options timeout:15
PaulHi there
You are executing this:
Platinium2:/pwoll/rda # nslookup Platinum
and you are trying to reach the Platinum2
On the other hand, Just to be sure is your DNS working correctly ?
Regards -
Trying to run rda.pl but getting error.
Hi,
I am Prasanta and I am facing this problem.When I was trying run rda.pl script for generating a report for the overal picture for the server and database.
Environment Details:
HP-UX(PA-RISC) B.11.11 64 bits.
Database version 10.1.0.2.0
Here is the error what I am getting:
oracle@ukw3devhp4:/tmp/prasanta/rda: ./rda.pl
Can't locate strict.pm in @INC (@INC contains: /opt/perl5/lib/5.00502/PA-RISC1.1 /opt/perl5/lib/5
.00502 /opt/perl5/lib/site_perl/5.005/PA-RISC1.1 /opt/perl5/lib/site_perl/5.005
.) at ./rda.pl line 12.
BEGIN failed--compilation aborted at ./rda.pl line 12.
Kindly advice me how can come out of this problem.Prashanta,
You did read the error message, didn't you? It is complaining about the absence of a file called 'strict.pm'.
This means either the file is missing from your OS (which you can veriify using find) or the environment variable PERL5LIB is set incorrectly. It should refer to the perl software provided by Oracle, not to the O/S provided version of perl. IIRC, the correct value of PERL5LIB is documented, so a search on http://tahiti.oracle.com should provide results.
Sybrand Bakker
Senior Oracle DBA -
THis is my first attempt at an RDA Extractor. THe problem I am getting is that the daemon job is failing with the message in the job log, "Error during extraction: 0 rowa in l_t_tid, 0 rows in l_t_data - Message RSCRT 360.
Here's how I got to this point:
1) Wrote an ABAP in ECC to set the REALTIME to 'X' for this CO-PA datasource (<- Not sure this is even possible for a CO-PA extractor)
2) Replicated the DS into BI 7
3) Created a transformation and DTP.
4) Created an infopack to initialize deltas and ran it (Successfully)
5) Created an RDA enabled infopack and assigned a daemon to it.Never could get it to work
-
Bit locker drive encryption failed due to power failer and hard disk corrupted
I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for helpHi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support -
Cannot send email from my Touch (connection to smtp server fails)
Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
MarceloThank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC -
BSI ConnectToDataSet...failed
Hi
We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
=Thu Jan 22 11:53:37 2009
=SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
=RfcAccept called
=Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
=Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
=Waiting for ABAP function calls
=Running function srv_Payroll_Tax_Calc_US_80
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling Payroll_Tax_Calc_US
=Running Connect_DB_Payroll_Tax_Calc_US
BSI dataset -> 110
ConnectToDataSource...Succeeded
ConnectToDataSet...failed
Error String -> 7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
=RFC error
operation/code Connect_DB_Payroll_Tax_Calc_US
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status
The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
I don't know what to check about the Dataset, could you please help me?
Best RegardsYes, it's correct.
I checked it's 8.0.
I think is a problem with the parameters under tf80server.bat.
SET
TF80_CONNECT_STRING=DSN=;UID=;PW
D=;
SET TF80_SCHEMA_NAME=.TF80
REM for SAP trace debugging, uncomment below & see file
errors.txt in gateway working directory
REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
REM else for usual operation
C:\BSI\TAXFACTORY\tf80server.exe %*
I don't know what is the "ODBC_DSN_NAME"
I have the user, password, the database name...
Best Regards -
Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM
Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
SiddharthHi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth -
Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails
Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcomeHi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal -
Running workbook from .bat fails to start application missing CORE40 dll
I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael
Maybe you are looking for
-
Drag and drop not working 1 day after installing OS 10.8.5
MacBook Pro 17", 2010, Upgraded from 10.6.8 to 10.8.5. Seemed to work OK. Next day, I noticed files & folders attach to cursor. When I hit esc key, folder returnes to original position. Photoshop also has problems with selection tool. Tried repairing
-
If my partner & I both have an iTunes account, can we home share both or somehow combine the two accounts?
-
Problem in my package procedure in a select query
PROCEDURE PROCESS_ROW( P_Event IN VARCHAR2, P_Old_Record_Key IN VARCHAR2, P_Ledger_Id IN VARCHAR2, P_Reference IN VARCHAR2,
-
Can I change what layer is used to name a Smart Object?
I really love smart objects, and in particular I appreciate being able to combine a layer and its adjustment layers into a single smart object. However, when I create smart objects from multiple layers this way, I end up with names like "Hue/Saturati
-
Personal Oracle 8i Database Create Error
I am trying to set up personal oracle on a Dell notebook with 128MB ram and windows ME. When I have installed the software it tries to create a database - this procedure crashes with a Page Fault in a Dos window and from then on the Notebook complete