UME to CUA(ABAP) user data replication for custim attribute.

Hi All,
We have planned that Users will be created in portal and from there user data will flow to CUA(ABAP) and from CUA it will flow to r3,BW,CRM ..etc .
I have configured the UME(portal) so that when ever I create user in Portal it flows to CUA (ABAP). In CUA when I assign a system (system name - the abap system in which CUA should transport the user data) to the user ,user data flows in respective system (R3) ie user gets created in that system (r3 or BW depending on the assigned system name) .
UME ---> CUA --- > r3 or bw or CRM etc
Now I want to automate the process .I want to assign the system name to the user in UME itself (not in CUA).I have created a custom attribute system in CUA .
Now problem is how to map UME custom attribute of system to CUA (ABAP) user attribute system . Also please let me know which XML file (data source) I should modify.
Regards,
Gyan

Hi Gyan,
We have installed NW'04 SP14 with both ABAP and JAVA stacks on this system. We are using datasourceConfiguration_abap.xml as our J2EE
UME setting. We have found that when we create any user in client 000 from CUA that user is then create in UME. We have three clients in this development system. When we create users from CUA from the other clients in this ABAP system the users do not come into the Java UME. We do not want to create the users in client 000. What is your Java UME setting and how can we get the users in the other clients push to UME.
Regards,
Anthony
Message was edited by: Anthony Bright

Similar Messages

Issue in data replication for one particular table

Hi,
We have implemented streams in out test environment and testing the business functionalities. We have an issue in data replication for only one custom table all other tables data replications are proper no issue. When we do 100 rows update data replication is not happening for that particular table.
Issue to simulate
Update one row -- Replication successful.
100 rows update -- After 3-4 hrs nothing happened.
Please let me know did any of you have come across similar issue.
Thanks,
Anand

Extreme slowness on apply site are usually due to lock, library cache locks or too big segments in streams technical tables left after a failure during heavy insert. these tables are scanned with full table scan and scanning hundreds of time empty millions of empty blocks result in a very big loss of performance, but not in the extend your are describing. In your case it sound more like a form of lock.
We need more info on this table : Lob segments? tablespace in ASSM?
If the table is partitioned and do you have a job that perform drop partitions? most interesting is what are the system waits nd above all the apply server sessions waits. given the time frame, I would more looks after a lock or an library cache lock due to a drop partitions or concurrent updates. When you are performing the update, you may query 'DBA_DDL_LOCKS', 'DBA_KGLLOCK' and 'DBA_LOCK_INTERNAL' to check that you are not taken in a library cache lock.

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Netweaver UME and LDAP sync ( user data)

Hi Experts,
We have a requirement to support the offiline availability for one of the netweaver servers in the landscape . We are planning to integrate all the java netwevaer systems with LDAP and is there any possibility to sync all the user data including password to the netweaver UME in case of LDAP not available. So, users can do some tasks in offline mode with LDAP .
Any information regarding would be greatly appreciated.

This tool looks interesting, and might be useful to Rao, but it would need some improvements to make it secure. I suggest using cryptographically secured session between the domain controller and the SAP system so that password changes can be send to SAP, and then captured by an RFC function module, and written into SAP user store. Since RFCs in SAP can be secured using SNC, and AD uses Kerberos, it would be good/easy to use Kerberos to secure the session between the DC and SAP ABAP when passing the password over the network. Then, the J2EE engine can be configured to use ABAP as the user store via UME. The end result is that Active Directory can be used to authenticate to SAP, and if AD is not available, or wide area network is not available the ABAP/UME password can be used locally.
One issue worth considering, is what happens when there is no network connection from the domain controller to the SAP system ? The software would have to queue the request so that when network connection is back, the password change is pushed to SAP system, and then the two password stores will be in sync at all times. Without this queuing system there is a chance the password will get out of sync.
Obviously, a lot of work to do in order to make this work, especially if you want it to work securely and reliably. However, it has some possibilities.
Take care,
Tim

Access enforcer and User Data Source for HR

We are on Access Enforcer 5.2 - service pack 2:
My problem is that when creating a new request in AE, I able to get a list of all users when I point my User Data Source to either SAP or UME. However when I attempt to create a request whilst pointing the User Data Source at the SAPHR system, I do not get any users back (and we have user set up in the SAP HR system).
Ive changed the connector to YES under the HR System box, Ive changed the Data Source Type and Details Source Type to point at the SAPHR and still it fails to fetch any users.
I've tried looking at the log, but can't get much out of it.
I would appreciate it, if anyone could provide any assistance.
Thanks you in advance.
Amarjit
Message was edited by:
amarjit singh

Hi Micheal,
Thanks for your reply.
I'm pointing both Data Source Type and Details Source Type to the same system SAPHR and to the same system name (which is our dev system)
Regards,
Amarjit

Data upload for Marketing Attributes.

Hi experts,
We have a requirement to create Marketing Attributes for Business partners. In our current roll-in the number of records are expected to be about 1000000 records. (1 Million). For the pilot roll-in we had about 300000 records and we wrote a custom program and used the FM CRM_MKTBP_ASSIGN_ATTRIBUT_TAB to update the records. Now that the data quantity is almost tripled, is there any different approach to load this?
We are now going to upgrade to CRM 7.0.
In the prev version the standard IDOC that we use to load BP does not contain any segment structure for Marketing attributes. Hence we would like to know how to approach such a huge volume? If it is through IDOCS we felt we can go for parallel processing, but I have not done it before. so my questions are:
1.Is there a standard IDOC in 7.0 version to load Marketing Attributes?
2.If yes, does parallel processing improve the performance of the data load?
3.If there is no standard IDOC then what will be the best approach for this data volume?
4.Should we still continue to use CRM_MKTBP_ASSIGN_ATTRIBUT_TAB?
Eagerly looking forward to your answers. Thanks in advance.
Regards
Balaji

Hi,
Thanks for the Reply, Could you provide details about the external List management with the document if any, in order to proceed further.
Thanks in advance
Regards
Balaji.A

CUA restore user data after system refresh

We recently copied our PRD ECC6 system to DEV. In the new DEV, a client (client 301) was created by way of a client copy to replicate the environment prior to the refresh. This new client has only one user - the CUA user for the CUA RFC.
Our CUA resides in an independent system. The user and authorisation data for client 301 exists in the CUA. How do I, or even can I push the user and authorisation data from CUA to client 301 on DEV?

Report RSCCUSND in the CUA system will allow you to push out data to the child system. You may need to manually re-create user groups in the child system for this to work.

ABAP Code Date Selection for InfoPackage Scheduler

Hello Group
I need to automate the selection of valid condition records for an extraction that have a From and To date range.
I noticed there is an option (Routine for time interval) to write ABAP code along with a template that is available in the InfoPackage.
I think the logic for the selection would be any record
Valid from       <= today
Valid to           >= today
Can anyone help with the ABAP code?
The template is as follows:
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
form compute_time_dependent_dates
changing p_datefrom type d
           p_dateto   type d
           p_subrc like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
          p_datefrom =
          p_dateto   =
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
Thank You for your help!!
Frank

I resolved the problem . I have changed the order of read table l_t_range because I need the header .
In the loop at datos I add the line l_t_range-iobjnm = 'ZXGE_UNO'.
The problem wasn't the call RFC it was that I built l_t_range bad. I need the infoObject name.
This is correct!!
READ TABLE L_T_RANGE WITH KEY
         FIELDNAME = '/BIC/ZXGE_UNO'.
LOOP AT DATOS.
      L_T_RANGE-FIELDNAME = '/BIC/ZXGE_UNO'.
      L_T_RANGE-IOBJNM = 'ZXGE_UNO'.
      L_T_RANGE-SIGN = 'I'.
      L_T_RANGE-OPTION = 'EQ'.
      CONCATENATE '00' DATOS-WA+3(4) INTO L_T_RANGE-LOW.
      APPEND L_T_RANGE.
    ENDLOOP.
*READ TABLE L_T_RANGE WITH KEY+
+*FIELDNAME = '/BIC/ZXGE_UNO'.+
+*    L_IDX = SY-TABIX.+
+*    MODIFY L_T_RANGE INDEX L_IDX
Thanks a lot
Ana

MDG-F Data replication for CCH using IDOC

Hi
Can anyone explains differance between Cost Center Hierarchy and Cost Center Group in MDG? As per my KX CCH in MDG is Alternative CCH in ECC not Standard CCH in ECC as it is created in Customization for Controlling Are.We can able to create alternative CCH in MDG with single processing also but when trying to replicate in ECC
SLG1 logs says as per below
Here it says CCH uses SOA but we maintained IDOC,Is CCH replication is not possible through IDOC with message type COGRP1.
Secondally we maintained ZG replication model but it says DIRECTLY replication Model . Any Clue?
Also how to assign MDG alternative hierarchy to ECC Standard Hierarchy node in MDG or we have to do it in KSH2 only from ECC side?

Hello Sanjay,
you've already create a similar thread http://scn.sap.com/thread/3585348 with the same screenshot and similar questions. Please do not open multiple threads for the same questions.
Thank you for your understanding
Michael

Data load for new attribute

i added a new attribute for customer master data but will be loading this attribute with a flat file which is different from the customer file. How can i achieve this?

Once you have added the new field in the target.
Flat File to contain Customer No & the new fields
Follow instructions in this link...
http://help.sap.com/saphelp_nw04/helpdata/en/9a/e92637c2cbf357e10000009b38f936/content.htm

User Data Source in GRC AC 10

Dear Experts,
Need clariofcation regarding User data Source for SAP GRC AC .
Till GRC AC 5.3 we can use only one sap backend system as user data source for gettting users like manager,approver etc and have to change User data source if user reside in some other system .
Is this been address with GRC AC 10 .
Thanks & Regards
Asheesh

Hi Asheesh,
Looking at the configuration, you can configure multiple target systems against all of the different data sources and authentication sources. It uses the sequence number to identify in which order these should be accessed.
SPRO - Ref IMG - GRC - Access Controls - Maintain Data Sources Configuration
However, in my experience connecting lots of different systems to take elements of user data causes performance issues and often cuases some confusion about the actual data to be displayed. You'll need to consider the field mapping and source elements casrefuly to ensure you don't get conflicting information.
Simon

How to Auto-Populate a User Data Picker?

I understand how User Data Pickers work (mostly). We have used them during the shell creation process to allow the creator to specify which users may access the shell and in what user groups they will be placed. This works fine— as the shell is created, these users are added and assigned to their respective groups.
From the documentation, User Data Pickers are supposed to support auto-population, but the system does not allow me to select a suitable source from which to pull. For example, the shell attribute form contains a User Data Picker that contains the name of the PM that was assigned to the shell. Say I have a BP in that shell on which I want the PM’s name to appear. I’m thinking I would place a User Data Picker on the BP and auto-populate that field from the shell attribute user data picker, but uDesigner doesn’t allow the attribute form as source as it does for other DE types. This is important as this field, the PM’s name, must be located on the BP if I’m to use it in a LiveCycle report.
Short of having the user select the name again within the BP, how do I pass the names of shell members that were selected during shell creation using User Data Pickers?
Thanks.

That works! Thanks Rich for clarifying your above posts with the screenshots.
Rich’s solution as it worked for me:
1. Add a User Data Picker to the shell attribute form.
2. Add a DE of DD SYS Medium Name to the shell attribute form. The DD type appears critical here and was my mistake in the past.
3. Auto-populate the DE created in step 2: Source Name-->Data Picker; Source Element-->uuu_user_name (in this case).
4. On the BP, place the same DE as step 2 and auto-populate (or link) it to the same DE on the shell attribute form.
What I didn’t expect:
1. User Data Pickers on BPs cannot reference User Data Pickers on shell attribute forms. Why do we need additional fields to link two other fields of the same type?
2. In operation the auto-populate, setup in step 3 above, occurs immediately as if it were a formula instead of just populating upon the shell creation stup as it would on BP creation.

CUA as data source for portal UME

Hi all
We want to use the CUA system as the data source for our EP6's UME.
Obviously our end users do not login to the CUA system and therefore have no password to this system. It doesn't seem rational to provide them a password to this system, but then again which password will they use?
I'm guessing that this is the case for most of the SAP customers.
Does this mean that we can't use the CUA as the UME data source?
If any of you use the CUA as the UME, we'd be very glad to hear your solution to this situation (we can't use one of the child systems as the UME).
Thanks,
Yeti

Hi Yeti,
My remarks below will not answer your question but it will help you with some decision on your UME data source.
As far as I know, most Portal use LDAP as their main UME datasource. This is largely due to the fact that LDAP contains ALL the users that are "employee" of the company. As for CUA, it does not contain ALL your users which could pose a problem for you when you want to execute certain Portal functions (or management approval flows) which require users who does not exist in your CUA (but exist in LDAP).
3 presentations which I think its good to have a look and share with....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5f57332-0a01-0010-12ab-dd472e87b8e6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c477de90-0201-0010-35ab-ddac4448ba9f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706065c4-3564-2a10-2382-a52fcbd7eefb
But there are also setup that uses CUA as their UME. I have linked some of the past threads who use CUA as their UME. I hope they can shine some light to your question. You can do a search here in the forum with "CUA UME portal" and you will also find posts that can help answer your question.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e
Solution Manager as a source for Portal UME
Multiple SAP Systems as UME
EP
Something to think about if you consider SSO with CUA as UME.
how to sso between portal and abap
Something more interesting to read about:
LDAP connection from ABAP to Portal
The above are base on my experience and the Portal setup which I have done for the company. But maybe there are better suggestions from other Portal guys,Experts,Gurus out here who will contribute to answer your question.
Hope that helps.
Ray

Are Multiple (Concurrent) ABAP Data Sources for AS Java UME Possible?

Hi All,
We have a solution which is using a JAAS logon module for partner authentication. for reason's I won't go into we have decided that it is best to use an ABAP data source. We will also be using the same JAAS approach for other ABAP applications in the future. Ideally we would configure the same JAAS server to use ABAP UME data sources from ABAP server 1 and ABAP server 2.
I see there are provisions in the documentation for multiple UME data sources of different types but it doesn't clearly say about different concurrent data sources. IS this even possible? If so is it wise?
Thanks,
Doug

Julius,
Thanks again for your reply. This is confusing. We have an existing .Net logon application where we centrally administer accounts and where users log in. On successful login they are issued a .net Auth cookie. Our JAAS module takes that cookie, does a web service call back to .Net and authenticates them. So authentication is done on the basis of the .Net cookie, not the java UME. We simply need a java ume to allow users to execute the application that invokes the JAAS module. The application invokes the JAAS module and if they successfully authenticate they are forwarded to the requesting SAP application. So the JAAS ume is really just needed to allow various users to run the JAAS invoking application starter. Ideally we'd use the same starter application for users of SAP Application 1,2,3, etc.
So that's where the question came from on multiple ABAP UME data sources for a single Java instance.
Hope that makes sense. Regardless the answer I guess is not possible but you see the method to our madness. And yes it is madness.
Thanks,
Doug

Abap+java stack for Portal 7.0 and MI - User Data Source

The SAP pre-requisites for Portal and MI (Mobile Infrastructure) 7.0 is an ABAP and Java Stack. If you install an AS ABAP + Java, the UME is automatically set up to use the ABAP user management of the same AS installation. What does this mean? The user store will be created in ABAP, for both the Portal and MI.
The impact of this is portal users management is in ABAP. This configuration by design cannot be connected to LDAP Active directory for user authentication.
Please let me know , if some body had already face similar issue and come up with the solution. Thanks in advance.

Hi Surya ,
When you install portal or any NW component with ABAP stack , ABAP stack hold precidence over the JAVA Stack , refer to this link to have more idea on this .
http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/306bb5bc98f24f8a85d489449af456/frameset.htm--
http://help.sap.com/saphelp_nw04s/helpdata/en/12/7678123c96814bada2c8632d825443/frameset.htm
Thanx
Pankaj

UME to CUA(ABAP) user data replication for custim attribute.

Similar Messages

Maybe you are looking for