Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Similar Messages

In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

Hi All,
I am unable to find which method suits for Master Recipe Creation in LSMW.
Please send me in detail if any method suits.
Can any body help me in this.
Points will be awarded for correct answer which helps me come out of this problem.
Regards,
Shobha

Hi shobha,
if there is code u have to do before uploading go for BDC or BAPI,
it not go for LSMW (recording method) --> in this its very difficult to code.
Thanks

Need bdc program for master recipe

Hi All,
Can any one please give me BDC code for Master Recipe Data Upload or is ther any standard program available to upload Master Recipe data?.
Regards
Sathish

Hi,
Can you share the same to me as well.
as I also have the same requirement
Thanks

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please help

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

Change master with release key

Hello,
When change master is created with release key, changes to material master is not possible.
However changes to BOM are possible. If someone wants to make changes possible for material master with release key then how one can do that?
Thanks in advance,
jagruti

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

About ECM's function with release key

hello,every expert.
Help me solve a problem.
current situation:
we use the tunction with release key in ECM,when we process the last step,release ECO,at first,set status ECOR,next,input release key 01,finally,save.
in this case,if don't input release key,still may save.
hope result:
after set status ECOR,if don't input release key,don't allow save.
how to achieve our hope result?
Best Regard.
YangTing PANG.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Unable to activate a Z Master data object

Hi All,
We have a master data object already with some Attributes loaded. I have added few more info objects as attributes to the same and marked them as Navigational. But I'm unable to activate this Master data object. "Error in activating the info objects". I repaired the info object from RSD1 (RSDG_IOBJ_REORG), and then tried to activate it. But in vain. Tried to activate it back ground. The job IOBJ_ACTIVATE is successful but in the job log it says . "Characteristic Z_ORD_MD: Error when generating master data routines
Error when resetting InfoObject Z_ORD_MD to the active version"
We have recently upgraded our BW system from 3.5 to BI 7.0. Requesting your expertise in solving this issue.
Warm regards,
Suman Pitta

What is SP level? please check...
Extras - check number range for SID
- Generate routines for Active ver
- Database tables - status - check all the tables for IO
Perform RSRV All elementary Tests for IO and let me know

Do you know the idoc for master recipe?

Hi all.
Do you know the idoc for maintain master recipe?
I am looking for the idoc.
I would like to create, update and delete master recipe with idoc.
I have investigated about idoc,but can't find suitable idoc.
(I did find it for BOM, but for recipe is nothing.)
Thank you in advance..
Satoru

Hello,
As far as I can see there are no BAPI's or IDOC's available to upload Master Recipe data.
A suggestion would be to use the batch input technique to upload the master recipe master data. You find the documentation of the batch input recorder etc. via the menu path System -> Services -> Batch input -> Recorder
I hope it helps,
Regards,
Marcelo

Report for Master Recipe

Hi All;
Is there any report apart from C251 which would give the deatils of the Master Recipe or to be more specific we need to download the Inspection characteristics from the Master Recipe.
Regards

Hi Lucky 121,
Please try and check table PLKO whether it meets ur requirement.
Regards
Suri

LSMW FOR MASTER RECIPE

Hello
Iu2019m working in lsmw master recipe "standard" by using object "0170" and method : batch input "0001"
when i want to create the structure I don't find same zone like "PVZNR" "PHFLG"...
Please note that i have master recipe contained more than 25 operations and 25 phase it's hard to created manually.
is there an easy solution to load MR by lsmw.
i will be thankful if you help me
Foued

HI Foeud,
Please post your question here:
ABAP Connectivity
Best Regards,
Ravi

Ale master data scenario integration with non sap syetem i.e seebeyound

hi
we have a business process scenario integrating with non sap system (i.e seebeyound)
action code      itemnumber    plant code
a(add)          material1     plant 2
d(delete)       material 3    plant 6
etc
we have upto one million materials assigned to 300 plants
we have to send all the above data to non-sap system (see beyound)
should we go for a custom idoc and setup the rfc configuration for the two sytems.
or can you please help how to go for this scaneriao

this is not one time.it is on daily basis.
please look at this scenario.what i need is how should i go for ale/idoc scenario for this one
Business case for Heiler Part/Plant Interface:
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

Activating ObjectKey's in change master with Release Key.

Hello Gurus,
I would like if SAP has come up with any solution for activating Object key for other objects apart from the standard BOM along with the release key.
Scenario:
I want my Engineering Record to create a change master with the Release key and use same the change master for making changes to Documents along with BOM. There is an OSS note 1767458 - WebUI: Object category enhancement for packages, release key for PLMWUI 746 and not for later versions of PLMWUI ( PLMUI 747).
Kindly advice.
Thanks & Regards
Jo

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Unable to activate ASR for an asset in Ops Center

While activating an asset in ASR it gets failed. There was a case opened with Oracle but they suggested to Re-install Oracle Ops Center . Is there any alternate method to solve this issue .
The problem was that a host was added a long time ago with another IP address and it was not removed . After chanign the IP it is unable to recognise the asset and activate ASR. Is there any option to remove the old conflicting entry of the asset .
Thanks/Regards
Mohammed Sadiq

Hello Mohamed,
This question is complex. There are 2 sides :
#1 one is the cleanup of the asset with wrong IP
#2 the other is the ASR activation problem
For issue #1 , to do the cleanup we need a jmxdump to understand the level of the cleanup that needs to be done. This would need to be worked in the case you have.
About the ASR issue #2, the activation fails because it is trying to activate a wrong formatted serial number
"ERROR The assets serial number ({0}) was not found in your CSI(s)"
So we would need more debug traces. I would suggest you create new SR if you don't have one already.
Please ask the SR owner to engage me if you want we discuss about it.
Regards,
Jean-Michel Quint
Ops Center Global Support Manager

I am unable to activate a Lightroom 5 on my laptop with the serieal number I have used for my desktop license. How do I resolve this?

How do I activate a version of Lightroom 5 on my laptop using the same serial number for the version running on my desktop machine?

Do they both have the same operating system, and what error message do you receive?

Unable to activate office for mac 2008

Hi,
i having a activation issue here with the office for mac 2008.
i have previously installed and activate a trial version and now i have a product activation key.
i tried to activate it but it stated not valid.
i tried to reinstall the software, but upon launching the software, it stated trial activated.
how can i resolve the issue?
regards

Did you enter your activation code in the first box to activate after you purchased?
http://www.entourage.mvps.org/Images/trial/try.gif
If you did, then you need to call the number given on the email you received to get a new number or additional help. Online Store/a> Click on *contact us*.
How to convert Office 2008 for Mac Trial Edition into a full retail, perpetual-licensed version
Activating and starting trial
More info on installing Office trial.

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Similar Messages

Maybe you are looking for