Unable to activate NitroX over a proxy

I'm trying to activate the NitroX Eclipse plugin over a proxy server, but it fails activation. It then prompts me to manually enter the activation code from the website. However, when I do this, and hit OK it says that the NitroX feature will not be available when it launches Eclipse.
I activated this fine last night from home without a proxy, but I did not have to do the manual activation paste like I'm having to do now. I'm not sure what the issue is.

I'm trying to activate the NitroX Eclipse plugin over a proxy server, but it fails activation. It then prompts me to manually enter the activation code from the website. However, when I do this, and hit OK it says that the NitroX feature will not be available when it launches Eclipse.I activated this fine last night from home without a proxy, but I did not have to do the manual activation paste like I'm having to do now. I'm not sure what the issue is.
I tried this in IE and it worked with manual activation. I'm not sure if it was Firefox problem or if there was some issue with my proxy returning bad data.

Similar Messages

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Unable to activate Genius

I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.

I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps.

I am unable to download voice over kit.

Respected sir/ mam,
I have used itunes to sync ipod shuffle before and it worked properly but now i re-installed itunes and im unable to download voice over kit, my internet is working finely. it says "the ipod software update server can not be contacted" i have reinstalled it many times but i still cannot use voice over.

I ran the network connectivity test, this is the result:-
network connectivity:
                 network interface verified
itunes store connectivity:
                 internet connection verified
                 secure links to itunes store failed
itunes diagnostics complete
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012A814069A2650
Current user is an administrator.
The current local date and time is 2012-10-28 13:48:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) 82865G Graphics Controller
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {238397AD-53A4-47C7-A813-878D02866E0B}
Description:    Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport
IP Address:    ***.***.*.*
Subnet Mask:    ***.***.***.*
Default Gateway:    ***.***.*.*
DHCP Enabled:    Yes
DHCP Server:    ***.***.*.*
Lease Obtained:    Sun Oct 28 12:11:18 2012
Lease Expires:    Mon Oct 29 00:11:18 2012
DNS Servers:    ***.***.*.*
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

Unable to activate my Ipad3 ????

Can not activate over WiFi eventhough I tried two different wireless routers. It connects to the router but when trying to activate "Unable to activate at this time ...blah blah". Called customer support. They say the wifi connection is up and down. This is not the case. They suggested activating over iTunes. I had to upgrade iTunes which rebooted my laptop and then took a loooong time to come up. And then it tried to recognize the Ipad and gave up. I then figured out that by toggling the wifi, I could force Ipad to connect to iTunes. No go there as well. iTunes gives same message. "We are sorry, we are unable to continue with your activation this time. Please try again later or contact customer care". Now I have to get an appointment and drive 16 miles to the Apple store. Very nice!!!
What is going on Apple? I was expecting a pleasant no-nonsense user-experience. This is totally crappy and unacceptable.
I am taking this unit out of the country and it has been engraved as well.
I AM VERY VERY DISAPPOINTED, to say the least!

Restart the iPad and try again. Try with iTunes when you restart the iPad and worry about the WiFi after you activate the device.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Unable to activate photoshop C3 as helpline is not answering,I have been ringing for two days..!

I am having real problems contacting the adobe helpline to activate my software, I have been ringing for two days and its always engaged.. Unfortunately The motherboard on my macbook pro failed ( and it was only just over two years old, so out of its warrenty)..
Anyhow I cannot therefore de-activate my photoshop software on my old computer, so therefore I am unable to activate on my new computer I just brought..
It is so frustrating as i have all the discs infront of me, but I only have four days left now to use the software that I have paid for and own..
Does anyone know of other phone numbers I could use, as the ones I have tried on this site are always engaged, I really can't afford to go out and purchase the software again.. Has anybody else come across this problem and how did you solve it..?
In desperation
Tenerifedoggies

Hi Wade,
I thought when I received your email it was somebody directly from adobe trying to help me...! indeed it was not a wise thing to do. I have deleted the post..
With the greatest respect I have tried calling quite a few numbers and at different times and if you have read other posts on this forum you will see that they have had similiar problems to me..
Anyhow I have had a nice email from Tracey an adobe person and hopefully she will be able to help me out.
Thanks again for your suggestion of an alternative number..

IOS7 update - unable to activate your iPhone

I have tried atleast 10 times now either over the air or through iTunes in the past 4 hours, always getting the same response 'unable to activate your iPhone, connection was reset.' So thanks Apple, I really enjoy having a £500 paper weight.

Then you'll just have to wait. People without a Social Security number or FEIN generally have to wait a lot longer given the fact that Apple is an American company.

Unable to activate trial due to a previous installation???

I got the message saying
- Unable to activate trial due to a previous installation of a NitroX trial on this computer.
I've read the announcement post on "Error during activation of NitroX Free JSP Editor" but I don't understand for several points.
1. I'd never installed a previous installation on that machine! Why did I get this message?
I've tried to remove the whole Eclipse directory and tried again, but I still get the same error message. I've tried to search if there's anything in the registry but none is found.
2. Despite point 1, I tried to go on and paste the same ID and serial # I use for the other machine, but NitroX refused to accept it. Is this normal?
3. I suppose point 2 means that an ID/serial pair could only be used once, right? So, I clicked on a link to register but failed because your server says that the email address has been used (of course!). And when I logged in, I couldn't find how I could add a second ID/serial pair. Does this mean I need to create a new account everytime I want an ID/serial pair? :shock: This isn't convenient :!:

I see. So in other word, if I need an ID/serial pair, I have to use another email address.
This is so inconvenient and so impractical. Don't you think so?
I mean, for free version, you can't prevent users from creating n logins to have n ID/serial pairs to work with his n PC. Why don't you just simply let them associate as many ID/serial as they like? Is this more pragmatic?
Anyway, it's your policy but imagine how many "preventable" mails always asking the same question of "Why my ID/serial doesn't work?" you could avoid.

IPhone 4S US/Sprint unable to activate!

Hello all,
I have a iPhone4S through Sprint, US carrier. I was having some difficulties with an enterprise application and my IT staff full reset my phone after backing it up to my MacBook Pro. Unfirtunately for the past 2 hours it would seem, I am unable to activate my phone after full reset. I have tried "Activating through iTunes" and I have tried activating over WiFi, both attach and unattached to my MacBook. Every scenario results in the same error on my phone, reading:
"Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes."
Well I have been trying again for more than a couple of minutes. Is the activation server truly down? Or is this on my end. Any assistance in troubelshooting. I had just recently updated over the air to 5.1.1 prior to the backup.
Thanks for any help. As an enterprise user who espouses the good apple word to my colleagues, I'm finding this experience beginning to degrade my faith. Phone based customer support was utterly useless, referring me to do what the phone states...

My only recourse to have my phone functioning today was to reset into DFU mode (usb plugged in, phone off, then hold power and home button together x 10 seconds then release power, continue holding home x 3 seconds and should see notice in iTunes that a phone in recovery mode has been attached (screen on phone will actually be black). Then let iTunes "recover" the phone. I backed up to my backup as I needed to use my cell for work, so will see if DFU can correct the activation server error at another time.

HT4623 Unable to activate my iphone - 'activation server is temporarily unavailable'.

Hi All,
I updated to IOS 6.1.2 which has been a total diaster. I am regulary losing signal, baterry life and more importantly the service from my provider - 'Searching' keeps appearing.
I have reset my phone via itunes four times over the last three days. Now I have unable to activate my phone. Any ideas how to solve this problem?
Many thanks,
Dal.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

HT5457 Unable to activate my new. 4s for last 4 hours? Response says server not available? Try later. How long is reasonable?

Unable to activate my new IPhone 4s, response says activation server temporarily unavailable. Have tried continuously over last 4 hours, how long is reasonable before I seek alternative action? It tells me to keep trying!

If this is a brand new iPhone 4S, contact whoever you purchased
it from. If you got your iPhone 4S from other than Apple or an Apple
authorized reseller, your iPhone was most likely hacked or jailbroken
in the past and the update servers are sensing that.
If this is an iPhone that is new to you but purchased second hand,
it most likely was jailbroken. Return the iPhone, get your money back,
and purchase from Apple or an authorized seller.
If this is occurring because you just updated or restored your iPhone,
the iPhone has become relocked to the original wireless carrier. You need
to contact that original carrier to see if they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>About=>Carrier?
Is there a valid sim in the iPhone?

Lync 2013 mobility / AV problem over web proxy

Hi,
We use Corporate Wi-fi network in our company and users going away to internet over web proxy. Lync mobility users use https connection to connect this corporate network but calling is unsuccesfull because of A/V ports can’t pass over web proxy,
Is there any solution for this ?
Mmst of hotels give internet conntection to their customers by web proxy thats why our users can’ t use their Mobile device for A/V call during at hotel. Because A/V media ports are blocked by hotels web proxy . How can we overcome this issue? Is
it posible to send all of the media traffic on HTTPS port?
Thanks in advance.
Bugra Keskin

Hi,
Did you deploy an Edge server in DMZ zone?
If the internal Lync clients are unable to negotiate media directly, then the clients will rely on the Edge Server to tunnel the media for them. The mobile client will connect to and send its media session to the external Edge interface.
More details:
http://blog.schertz.name/2013/11/lync-mobility-media-paths/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.

I upgrade my iPhone 3gs from 4.1 to 6.1 but i am unable to activate my phone now

I upgrade my apple iPhone 3GS IOS from 4.1 to 6.1.4 but now i m unable to activate this phone, and there is no sim card is accepting by this phone.
please help me to solve this issue as soon as possible

Sounds like your iPhone was unofficially unlocked by hacking it. You need to call AppleCare, tell them you only want to know which cell carrier your iPhone is locked to and give them the model and serial number. Then contact that cell carrier and see what their official unlock policy is and if you qualify.

I am unable to activate my iPhone 3gs after installing ios 5. please help.

hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. please tell me how to activate it or how can i get back my original factory settings. need ur help guys do suggest me something.

Hi Vivek,
I am facing this problem too.
Were you able to fix this problem.
If yes then how??

Unable to activate NitroX over a proxy

Similar Messages

Maybe you are looking for