Unable to burn disk a internal error occured
please help me solve my problem.
Another help source (if you haven't already done so). Go to your OS Help Menu. In the search field type dvd Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up. At the bottom left of the window, click on the purple button w/the "?" in the middle. This will bring up the Help Menu. T
ry a different brand. Top forum favorites CDs
FUJI TDK Verbatim
DVDs
Maxell
Make sure the DVD/CDs are not dirty, smudged and/or scratched. http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Cures for an uncooperative CD/DVD drive
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
Similar Messages
-
Hi
Can anyone help me resolve this problem.
Thanks. ACThanks. I entered "do nothing". Now able to export. Appreciate your help.
Warren singapore -
After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh -
Burn a disk failed - internal error
why do i get a "burn a disk failed - internal error" when attempting to burn a disk? I have burned 11 consecutive disks w/o a problem. number 12 wouldn't burn!
I received the same error message then I noticed that one of the tunes in the playlist that I was trying to burn was listed as being 4 minutes long but was in fact playing for only one minute - there had been an error in its downloading. I removed that tune from the playlist and I was immediately able to burn the playlist. Hope this helps you.
-
On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions. -
Error Code: "The disc can't be burned because an unexpected error occurred (error code 0x8002006E).
I cannot burn items to a disc and get the following error code; "The disc can’t be burned because an unexpected error occurred (error code 0x8002006E)."
I appreciate any help in trying to figure this out."I also use the application "Clean My Mac" at least ounce a month to rid it of all unwanted or unneeded files, which also is supposed to keep my Mac running at optimum speed, just as a by-the-way."
There is your problem right there!!!
CleanMyMac is complete and total paid ""garbageware"!!!!
You may have irreparably damaged/corrupted and/or deleted important/needed system and OS X operational files using CleanMyMac.
You can try and use this uninstaller to completely uninstall CleanMyMac, but the damage to your system may have already happened and has been done
since you readily admit to using this garbageware regularly on your Mac.
Here is the proper way to uninstall both CleanMyMac and CleanMyMac2.
http://macpaw.com/support/cleanmymac-classic/knowledgebase/how-to-uninstall-clea nmymac-classic
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Make sure which version of CleanMyMac you are using and pick the correct uninstaller.
Do you run any other so-called hard drive "maintenance" or "cleaning" apps or any type of commercial antivirus softwares?
If you do, you need to search the web to find out how to correctly and properly uninstall these types of apps.
You now may need to get yourself another external hard drive, purchase and use a data cloning app, such as CarbonCopyCloner or SuperDuper to create a exact bootable clone of your Mac's internal hard drive to a new external hard drive.
Then erase and reformat your boot drive and do a complete, clean reinstall of you OS X system, system and security updates as well as a complete reinstall of all of your applications and updates.
Let this be a very important lesson to you!
Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary OR needed. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
These types of system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and important data is too great a risk!
Here is a proper and manual methodology to "cleaning" data off of your Mac.
Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you are an iMovie user, iMovie has its own individual Trash location that needs to be emptied, too!
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
http://www.omnigroup.com/more
Download an app called OnyX for your version of OS X.
http://www.titanium.free.fr/downloadonyx.php
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Moving iTunes library
http://support.apple.com/kb/HT1449
Moving iPhoto library
http://support.apple.com/kb/PH2506
Moving iMovie projects folder
http://support.apple.com/kb/ph2289
Good Luck! -
Unable to complete backup. An error occurred while copying files to the...
Add me to the list of those with TIme Machine backup failures.
I am repeatedly getting the following error message:
"Unable to complete backup. An error occurred while copying files to the backup volume."
I do have work-around.
1. Open Time Machine Preferences... (from the Time Machine menu in the menu bar)
2. Change Disk...
3. Re-select the disk you are already using and select "Use for Backup"
4. Back Up Now (from the Time Machine menu in the menu bar)
The error eventually comes back, but following the above procedure keeps it at bay for a few days.
I have only had these errors since 10.5.3.Mle,
Take a look at the following...
*_“Unable to Complete Backup. An Error Occurred While Copying Files to the Backup Volume.” (Console: “Error: (-43) copying”, “Copy stage failed with error:11”)_*
There are several reasons why this error message can appear. Consider each topic individually. If one does not resolve the issue, move on to the next one. The following topics have resolved this issue for others.
*If A Backup Is Interrupted* #
“If an interruption occurs, Time Machine will wait for a period of time to see if the Time Capsule becomes available again. After this time expires you will see a alert message stating "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume." In Time Machine preferences, the "Latest Backup:" field will state "Failed".” [http://support.apple.com/kb/HT1176]
You will need to reestablish communication with the Time Machine backup disk.
*Anti-Virus Software* #
Have you been running anti-virus software? xClav, Norton, Sophos, Macaffe etc... According to many posters in the forums this software can play havoc with Time Machines attempt to function properly.
*Firewire Devise Interferes with Time Machine Backups* #
If you are backing up to an external hard disk by means of firewire, do you happen to have another firewire device attached as well? An iSight camera or video recorder maybe? Sometimes additional firewire devises can interfere with the signal/power to the backup drive. Unplug it and attempt a backing up again.
*Corrupt File / Incorrect Permissions* #
One poster observed: “I searched my system logs and found a file that caused my connection to the TC to fail. I erased that file (after checking what it was - a temporary file connected to my Epson scanner) and tried again to back up for the first time. This time it worked, and in under 10 hours (I had been expecting about 20-24 hours, based on the data transfer speed).”
Initially this might be resolved without deleting the offending file. Simply use Disk Utility to “Repair Disk Permissions”. Or failing that, booting from the Mac OS X Installation DVD and running “Repair Disk” on the Mac’s internal hard disk. Now try backing up
Otherwise, you may need to track down the specific file causing Time Machine to choke.
Before attempting another backup, go into Applications --> Utilities --> and launch Console.
Under “LOG FILES” on the left select "system.log".
In the search field in the upper right, type in backupd. This is the process Time Machine uses to perform backups. By searching just for this process we'll isolate only Time Machine activities.
With the Console open, attempt another backup and note the time it starts and the time it stops. Often, the activities reported will identify the very file or event that caused the attempt to choke. (You can copy and paste the events for this backup attempt from the log into a post here and we may be able to tell you exactly what is happening.)
Once you determine which file or event it is, you can decide whether to move, delete, or modify certain things and then attempt another backup. For Instance, if the logs report something like this:
+Error: (-43) copying /Users/Home/Library/Application Support/Quicksilver/Actions.plist to+
+/Volumes/Backup HD/Backups.backupdb/My Mac Pro//Users/Home/Library/Application+
Support/Quicksilver
Then it’s telling you Time Machine is choking on the file labeled Actions.plist and it’s having trouble copying to the backup disk.
On your computer, Navigate to that file ( Actions.plist ) and move it to the Trash, but DON’T empty it yet. Now try backing up again. If it succeeds, you can launch Time Machine and go back 24-48 hours and restore a copy of Actions.plist and replace it. Then empty trash.
*Partition Scheme/Formatting Issue*
This KB article explains one reason you may be seeing that error message [http://support.apple.com/kb/TS1550]. It's a partition scheme issue. Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. You will likely need to repartition the drive and start again. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” (http://www.girr.org/mac_stuff/backups.html)
Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups.
Let us know if any of the suggestions above resolved your issue.
Cheers! -
Acrobat XI Pro doesn't work on iMac Retina 5K, "An Internal error occurred"
Please help.
I just received my latest iMac Retina 5K 27inch and tried to install newly purchased Acrobat XI Pro, installation went ok, but it give me error message when I open the program:
" An internal error occurred."
I tried to install it into my old iMac 2010 and it works fine. Below are system information of my 2 x iMac, can anyone give me some advises? Thank you.
iMac Retina 5K 27inch Late 2014
OSX Yosemite Ver 10.10
Processor 4 GHz Intel i7
Memory 32Gb 1600 MHz DDR3
AMD Radeon R9 M290 x 2048MB
iMac 21.5inch Mid 2010
OSX Yosemite Ver 10.10
Processor 3.06 GHz i3
Memory 4GB 1333 MHz DDR3
ATI Radeon HD 4670 256MBHi yang2898,
If the installation went ok and you are unable to launch Acrobat then this might be due to licensing issue.
Please check if you have full read/ write permissions to the following folders:
[Home]/Library/Application Support/Adobe/SLStore
[Home]/Library/Application Support/Adobe/SLCache
[Home]/Library/Application Support/Adobe/AdobePCD
You might also want to check in the root user account of Mac (Enabling and using the "root" user in Mac OS X - Apple Support)
Regards,
Rave -
Flash Builder 4.5 Data Services Wizard, setting up REST service call returns Internal Error Occurred
Dear all -
I am writing with the confidence that someone will be able to assist me.
I am using the Flash Builder Data Services Wizard to access a Server that utilizes REST type calls and returns JSON objects. The server is a JETTY server and it apparantly already works and is returning JSON objects (see below for example). It is both HTTP and HTTPS enabled, and right now it has a cross-domain policy file that is wide open (insecure but its not a production server, it's internal).
The crossdomain file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="*" headers="*" secure="false" />
<allow-access-from domain="*" to-ports="*" secure="false"/>
<site-control permitted-cross-domain-policies="master-only" />
</cross-domain-policy>
The crossdomain file is in the jetty server's root directory and is browseable via HTTP and HTTPS (i.e. browsing to it returns the xml)
Now before all of you say that using wizards sucks (generally) I thought I would utilize the FB Data Services Wizard as at least it would provide a template for which I could build additional code against, or replace and improve the code it produces.
With that in mind, I browse to the URL of the Jetty Server with any web browser (for example, Google Chrome, Firefox or IE) with a URL like this (the URL is a little confidential at the moment, but the structure is the same)
https://localhost:somePort/someKey/someUser/somePassword/someTask
*somePort is the SSL port like 8443
*someKey is a key to access the URL's set of services
returns a JSON object as a string in the web browser and it appears like the following:
{"result":success,"value":"whatEverTheValueShould"}
Looks like the JSON string/object is valid.
I went through the Flash Builder Data Services Wizard to set up HTTP access to this server. The information that I filled in is described below:
Do you want to use a Base URL as a prefix for all operation URLs?
YES
Base URL:
https://localhost:8443/someKey/
Name : someTask
Method : POST
Content-Type: application/x-www-form-urlencoded
URL : {someUser}/{somePassword}/someTask
Service Name: SampleRestapi
Services Package: services.SampleRestapi
datatype objects: valueObjects:
Completing the wizard, I run the Test Operation command. Remember, no authentication is needed to get a JSON string.
It returns:
InvocationTargetException: Unable to connect to the URL specified
I am thinking - okay, but the URL IS browseable (as I originally was able to browse to it, as noted above).
I continue to test the service by creating a Flex application that accepts a username and password in a form. when the form is submitted, the call to the service is invoked and an event handler returns the result. The code is below (with some minor changes to mask the actual source).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:SampleRestapi="services.SampleRestapi.*"
minWidth="955" minHeight="600">
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.ResultEvent;
protected function button_clickHandler(event:MouseEvent):void
isUserValidResult.token = SampleRestAPI.isUserValid(userNameTextInput.text,passwordTextInput.text);
protected function SampleRestAPI_resultHandler(event:ResultEvent):void
// TODO Auto-generated method stub
// print out the results
txtAreaResults.text = event.result.message as String;
// txtAreaResults.appendText( "headers \n" + event.headers.toString() );
]]>
</fx:Script>
<fx:Declarations>
<SampleRestapi:SampleRestAPI id="SampleRestAPI"
fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
result="SampleRestAPI_resultHandler(event)"
showBusyCursor="true"/>
<s:CallResponder id="isUserValidResult"/>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Form defaultButton="{button}">
<s:FormItem label="UserName">
<s:TextInput id="userNameTextInput" text="q"/>
</s:FormItem>
<s:FormItem label="Password">
<s:TextInput id="passwordTextInput" text="q"/>
</s:FormItem>
<s:Button id="button" label="IsUserValid" click="button_clickHandler(event)"/>
<s:FormItem label="results:">
<s:TextArea id="txtAreaResults"/>
</s:FormItem>
</s:Form>
</s:Application>
It's a simple application to be sure. When I run it , I get the following returned in the text area field txtAreaResults:
An Internal Error Occured.
Which is equivalent to the following JSON string being returned:
{"success":false,"value":"An Internal Error Occured"}
It appears that the call is being made, and that a JSON object is being returned... however it does not return the expected results?
Again the URL constructed is the same:
https://www.somedomain.com:somePort/someKey/someUser/somePassword/someTask
So I am wondering what the issue could be:
1) is it the fact that I am browsing the test application from an insecure (http://) web page containing the Flex application and it is accessing a service through https:// ?
2) is the JSON string structurally correct? (it appears so).
3) There is a certificate enabled for HTTPs. it does not match the test site I am using ( the cert is for www.somedomain.com but I am using localhost for testing). Would that be an issue? Google Chrome and IE just asks me to proceed anyway, which I say "yes".
Any help or assistance on this would be appreciated.
thanks
EdwardHello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above. -
I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ... -
An internal error occurred while calling 'submitReport' API. (Error: ERR_WI
An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR -
The disc can't be burned because an unexpected error occurred (error code 0x80020000).
Hello - I am receiving this error code on all my Apple computers (iMac and MacBook) which have the most current Mac OS X 10.6.7. I'm a photographer and burn CDs frequently and out of the blue began having issues two days ago:
The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
What is the remedy? Is it related to a recent update or will there be an update to fix? Since it's not simply one computer, gathering it's not the burn drive but software related...
FYI - Yes I've tried other brands of disk, etc. however, this is a part of my daily work-flow and have had no issues till a couple days ago.
Thank you all and any for your time in assisting!!Same here. I bought a macbook pro in march. Now I got this error. And I'm from Brazil... Not speak english very well, but tried to explain what happens with my new macbook (that can't burn DVD)...
Please, could you help me?
thanks -
Time Machine Error Unable to complete backup. An error occurred while ...
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault. I was having a problem with it and turning it on an off got rid of that problem, but created this one. I've noticed that when I shut down the computer and filevault accesses the TM hard drive, it can back up.....but then when I'm logged on, or I want it to back up I get the error. I've tried fixing the drive, removing the in progress file and resetting the PRAM (i think that's what it was called). I'm starting to run out of options and have no other drive to back all this info on to reformat it.
I really don't want to loose all my stuff.
Please help!
Darianautical_stars wrote:
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault.
Usually this message happens when you replace an external disk that was being backed-up by Time Machine with another one of the same name.
Since File Vault works by making a sparse image of your home folder, and it's treated as a volume just as a HD is, that's probably what's happening here: the new sparse image has the same name as the old one, but isn't the old one.
First, consider whether you really need File Vault. It doesn't work well with Time Machine: you can't see or restore individual items in your home folder, and it only gets backed-up when you log out.
If you have a lot of other things, say photos, videos, and/or music that don't need to be encrypted, perhaps there's an easier way to secure our sensitive data. You can create an encrypted disk image via Disk Utility (in your Applications/Utilities folder), then copy the sensitive documents into it. Then the rest of your home folder is backed-up normally, and individual items can be viewed and restored in the usual fashion.
But if you do continue using FileVault, you may have to use TM to delete all backups of it, via the instructions in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That should then allow the new version of your encrypted home folder to be backed-up by TM. -
Adobe Reader 11 "an internal error occurred" - Mac OS X 10.9.3
I have a user running Adobe Reader 11 on Mac OS X 10.9.3 starting today the application can not be launched. Instead the following: "an internal error occurred" is displayed.
I have already deleted all Adobe Reader files (library and application) from the system, restarted, and reinstalled the latest version from the adobe website. This did not resolve the problem. I have also repaired the system's disk permissions and verified the integrity of the boot disk.
Does anyone have any idea what a solution for this problem might be?I'm having this same problem too
Maybe you are looking for
-
I recently upgraded firefox and now whenever I click a mailto link it opens gmail in the current tab rather than in a new window. How can I get it to open email links in a new window.
-
Prepared Statement with ORDER BY
I am trying to use order by with prepared statement but it is not ordering. String sql = "SELECT * FROM MATERIAL WHERE (LOWER(NAMEE) LIKE ('%' || ? || '%') ORDER BY ? "; PreparedStatement ps=CM.getStatement(sql); ps.setString(1,p); ps.setString(2,sor
-
Adding Image to IDR Basic in Floor Plan Manager
Dear Experts, i wish to add Logo Image on the Left Hand side on the IDR ( IDR Basic) in the FPM application. If i use the dynamic addition using method add_image_item , logo appears below almost where the IDR extention tickets would appear Kind Rega
-
Installing printer Envy 4500 on MAC OS X.10- set up bar stuck on "retrieving information"- Help!!!
I bought the HP Envy 4500 because I just upgraded my Mac to OS 10.10 and my office jet would not come along for the ride... I installed the driver from the HP website and I completed all the steps until the last step "configuation results". The wind
-
Center Image in dynamic Image Field
Hello, i am from Germany and my english is not good, so excuse for it. I Use Live Cycle Designer 8.0. I Designed a Form with a dynamic Image Field, so the user is able to change the image. The Image Field is centert horizontally. The Problem is, if t