Unable to clear GR/IR Items from 2003.

We are trying to match some old open items for GR/IR from the year 2003. We have tried using the T-code f.13 to clear them off but the program just doesnt pick up the documents. There are no error messages. We have also tried using f-03 & f-30, but it is of no use either. The documents just dont get picked up in these programs. I am using FS10N and in that it is showing up as open. I am able to view these documents in FB03 as open.
The documents are showing up as open in the GL account, but they are not getting cleared anyway.
Few more details :
1st Document Type is 'WE' and the Transaction details are :
Dr. Cost     -     $177
Cr. GR/IR Account     $177
We are trying to clear this with 2nd Document Type 'WE' and the transaction details are :
Dr. GR/IR Account -     $177
Cr. Cost     -     $177
Both the transactions have been passed using T-code MIGO in the year 2003. We are trying to clear them off with eachother and netting them off to zero.
Need help in resolving this problem urgently.

Thanks guys for quick reply.
In MR11 - I tried removing the Qty. var option. It was askign me to atleast select the type of surplus option. I tried both Delivery and Invoice surplus. Both the times I get the error as "No Data selected.....". However, the fact is that there is no delivery or invoice surplus for these items. They are just offsettings entries that need to be striked off as cleared in SAP.
I also tried usinf F-03 with amount option and Document date option. It just says "No data selected...".
Few facts about these entries :
1. 1st document and 2nd document both have been passed using T-code MIGO in SAP.
2. Transaction in the 1st Doc :
          Dr. Cost - $177
          Cr. GR/IR Account $177
3. Transaction in 2nd Doc  :
          Dr. GR/IR Account - $177
          Cr. Cost - $177
4. These entries were passed in July 2003. And are still showing as open items in FBL3N for the fiscal year 2008.
Please help.

Similar Messages

  • Unable to clear vendor open item.

    Hi experts,
    Have posted vendor document  under document type KZ directly, there is no open item invoice to clear the document.
    posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
    Vendor account entry
    25 vendor account 10000
    38 vendor account  8000
    50 bank account     2000
    document has been cleared only 8000 not 2000.  Please advice me how  to clear the KZ document.
    Regards,
    Anji Reddy.

    HI Anji Reddy,
    There is some Process to do Clearing function
    first of all Open item should be there in Vendor account with the Invoice.
    For that invoice there should be a payment which is full payment or else Partial Pament.
    Then you can do clearing function to clear the Open items.
    Through F-51 you can do both Payment and clearing which is Post with clearing
    if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
    Try to explain your senario more Clear so that your doubt can solve
    Regards
    Mahesh

  • Clearing of open items from one Bank Account to one or several customer A/C

    The requirement herein is to do the Posting & clearing of open items from one Bank Account to one or several customer Accounts. We will have to use the Standard program RFBIBL00 to achieve this because the program can do the posting and clearing of open items. I know that we will have to use the structures BSELK (Header) & BSELP (item) to get the clearing functionality as well. Now the question is to which field we will map the Bank A/C No. and the Customer Clearing A/C. I need help on mapping the data to correct structure fields. I thought about it and I think the data should be arranged like the following:
    BGR00- Session Header
    BBKPF- Header
    BBSEG- Doc. data (Bank Account BBSEG-BANKN )----Can you confirm ??
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    I know that the clearing can happen from one Bank A/C to several customer accounts. I am thinking on building up data in this format & then writing it to a file to sumbit the file data to RFBIBL00. Can anybody help me in building up the data. Kindly provide your helpful insights. I want to be sure if this is correct or not ?? One more question how to fill the BSELP structure ??

    Solved Through forum

  • Not cleared two line items from the GR/IR clearing

    For one of the items in PO following transactions are done...
            Mtype   Date            Quantity             Amount
    GR   101    06/14/09        1 02.001            887.85
    GR   102    06/14/09        102.001-            887.85
    GR   101    06/14/09        101.999             887.85
    GR   101    07/22/09        102.001             923.61
    IR-L            06/14/09        102.001            887.85
    IR-L            06/14/09        101.999            887.85
    FBL3N: out put
    Open items
    Doc Type  Date                           Amount
    WE           06/14/2009 86            887.85
    WE           07/22/2009 96            923.61-
    Cleared items:
    Doc Type  Date                           Amount                                                                     
    WE            06/14/2009  96              887.85-
    Z9             06/09/2009  86              887.85
    WE            06/14/2009  96              887.85-
    Z9             06/09/2009  86              887.85
    System has not cleared two line items from the GR/IR clearing for this line item in PO.
    What could be the reason these items are not cleared and now how these line
    items can be cleared?

    Hi,
    When the Dr and Cr amount are equal to zero system will automatically clear the line items in F.13.  Here the open items are appearing with different amounts due to that system not able to clear.
    By passing some manual JV or something you done to make Dr and Cr equal to zero then you clear through F-03(untick post automatically for this clearing in T.cdoe FS00)
    Regards,
    Sankar

  • How to extract Cleared and Open Items from SAP R/3?

    Hi experts,
    I have a requirement from user to extract cleared and open invoice items from SAP R/3.
    Can someone tell me how to do that?
    Thanks!

    Hi,
    Use the Data source 0FI_AR_4 to Know the status (0FI_DOCSTAT) of payment to be done by customer.
    OR
    Enhance the 2LIS_13_VDITM with VBUP fields which will give the status of Billing.
    With rgds,
    Anil Kumar Sharma .P

  • Unable to clear customer line items for a particular company code

    Hello,
    For a certain company code, even though open items are present for some customers, i am unable to clear them using F-28 or F-32.I am getting the message 'No open item exists', Anyone come across this scenario before?

    Hi:
             Make sure you are giving proper selection criteria for the processing open item. May be the items are Special GL based transaction so you need to select special GL indicator to process open item. Please also refer to OSS Note 136754 - F-03, F-32, F-44, F-28 missing open items. Hope this will help you.
    Regards

  • Unable to add or remove items from dock

    First, sorry if this is a duplicate post - I did a number of searches and came up with lots of "frozen dock" and other bugs that weren't this one. There seemed to be pages and pages and after several I just gave up and posted myself.
    For the past few weeks I have noticed that I have been unable to remove any items from the dock. It is not that I get an error message when I try to remove them, they just don't budge.
    If an item is in the doc and the program is active, and I ctrl-click on the item - there is no longer a "Remove from dock" option.
    Further if a program is in the doc only because it is running and is not "always there", the ctrl-click will no longer give the "Keep in dock" option either.
    The lack of error message almost makes me think I have set some "feature" without realizing it - rather than encountering a bug.
    However, I would very much like it to go away anyway
    Anyone have any ideas?
    Any help would be greatly appreciated,
    Will
    Powerbook G4 15" Mac OS X (10.4.6)

    It sounds like you might have the 'contents-immutable' setting enabled on your "Dock". The only GUI available to an OS X client machine to adjust this setting is under "Parental Controls" in the "Accounts" pref pane - if your account is listed there as "managed", then it's possible that it may have become activated, in which case it should be possible to log out of the account, then in to an "admin" account and change the setting from there.
    Unlike "parental controls" which manage the "Dock" through 'mcx_settings', it is also possible to set the property directly in the "com.apple.dock.plist" file in the user's "~/Library/Preferences" folder. Usually this wouldn't be expected to happen by accident - third party software is often involved when hidden settings are suddenly found to have been enabled.
    If 'contents-immutable' has been set in the ".plist" file, one way to get rid of it is to move the "com.apple.dock.plist" file out of the "~/Library/preferences" folder, logging out and back in. The "Dock" will revert to default settings so it will be necessary to reconfigure it again. Alternatively, try opening "/Applications" > "Utilities" > "Terminal.app" and entering these commands:<pre>defaults delete com.apple.dock contents-immutable
    osascript -e 'tell application "Dock" to quit'</pre>

  • Framemaker v11 Books unable to clear all change bars from documents

    I have converted all Framemaker v10 documents to v11 by opening and saving. However when opening the Book v11 for these documents and applying the 'clear all change bars' option a book error log message advises that the documents cannot be opened as they are in a previous version! When performing the same function on the individual documents outside of the Book this works fine. But unable to clear all change bars within a book when selecting all the files in one go. Is there a bug with Books in v11?

    My version is FM11.0.0.380 so I will install the patches. I did open all documents up from within the book and then individually saved them, then i applied the 'clear all change bars' and this worked. It just does not seem right that you can clear the change bars from the documents from outside the book but when you try it from within the book it says cannot open document as it was created with a previous version. I have managed to get it working but would be good to know if it is a book bug or not. I will try it on another Book when I have upgraded to the latest patch.

  • Unable to Clear Vendor open items in F.13

    Hi All,
    We have few vendor codes, where all are having some normal open items as well as Spl GL open items and net balance is 0.
    When we do clearing with F-44, No issues at all
    But when we try to clear them through F.13, system is grouping normal open items and Spl GL transactions separately.
    If i choose  Shortlist (Statistics) in selection screen, then only atleast i will be able to see normal line items in one group and spl gl items in another group.
    If i choose, Detailed List with Error Log, i am not able to see anything related to any kind of line items.
    So then, i red the documentation of the program SAPF124, in that it says Down payments can only be cleared if down payment clearing for the same amount has been posted.
    As we all know that, each spl GL transaction can be cleared against one normal transaction in F-54. But in our case, we never do that practice, and always want to clear spl GL transactions along with normal transactions.
    My question is that, Is it mandatory to clear them in F-54 before doing F.13?
    As i know, there is an check box option for selecting spl GL transactions in F.13....in this case why should i clear prior to F.13?
    Please advise...
    Regards,
    Srinu

    Hi Gaurav,
    Thanks for your inputs.
    I agree with you, but my intention is to know, whether any possibility (change of internal selection criterion for recon account)
    to clear them automatically in F.13 without doing F-54 only.
    Anyhow i have found two other alternative solutions for the same.
    1) Batch input recording for F-44 in LSMW.
    2) Using worklist instead of vendor code in F-44 to clear all items at one go.
    As our business won't follow clearing with F-54, so this requirement may come often. 
    But only my concern is, they need to identify these cases separately and spend more time to add each vendor code to that worklist, since they are not able to add a range of vendor codes directly. As it allows only single values.
    So, is there any other way, which we can suggest them to add 10000+ vendor codes to the same worklist, since we can add 12 codes at one go and repeating the same will take time
    Regards,
    Srinu

  • Unable to clear sub-ledger items on uploading electronic bank statement

    Hi All,
    The client is in Belgium & uses format BE for bank statements. in postprocessing of EBS (FEBA), there are a few items with a posting rule 0002 (for Eg) that need to be posted manually. The posting rule is as below:
    0002   1  40   BE INTERIM                 50  BE BANK      ZR   1
    0002   2         BE OUTGOING BE      50  BE INTERIM   ZV   4
    As you can see the posting type is 1 & 4. The user's contention is that this should knock off items in sub-ledger i.e., vendor & customer open items but the system is posting to the GL accounts that are assigned to the account symbols shown above.
    My question is... Is it possible with such a posting rule to clear items in sub-ledger? If yes, is there any setting that needs to done to ensire that in FEBA, on manually trying to post the system should direct to the screen where you can enter the customer or vendor number & select open item?
    Thanks,
    Lakshmi

    I found the answer in Customizing new G/L. thanks anyway.
    Heiidi

  • Unable to get Color Calendar Items from Outlook to Appear w/ Color on iPhon

    I have Outlook 2003 and I have my work items color-coded using the color labels available in outlook 2003, but when I sync up my iphone the color labels disappear and the items all appear in red color.
    Does anyone have any suggestions?

    I initially had this problem but have now solved it. You need to set up multiple calendars in Outlook. So, I have one for work, social, birthdays etc. The iphone will sync each calendar in a different colour.
    Using multiple calendars is actually quite helpful. You can overlay the calendars so all can be viewed at the same time. I am not sure whether this feature is available in Outlook 2003 though.

  • Unable to clear a specific file from the Download Manager. This file (type: .flv) download is "paused" and I cannot Resume or Clear from the history. Help anyone ?

    I noticed a certain file is "stuck" in the Download Manager. The file download appears to be Paused and all attempts to remove / clear / resume have not worked. The file is a .flv type. The mouse-over info does show the url address and it shows 40MB /40MB complete. Help anyone ?

    Delete the file downloads.sqlite in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    See:
    * http://kb.mozillazine.org/Unable_to_save_or_download_files#Manually_delete_download_history

  • UNABLE TO TRACK THE SHIPPABLE ITEM FROM SALES ORDER

    hi Experts,
    Anybody can please help me on this issue that i create a shippable item with install base trackable option checked while doing the transactions like miscelleneous receipt and purchase order on that item automatically tracked in the install base while doing the sale order for the same item it is not tracked, but non shippable items are tracked in install base perfectly.
    My requirement is shippable items are also tracked in install base, i already checked the option install base tracked in inventory master items form even though it is not tracked through sales order.
    Thanks,
    Christ.

    Dear Sheetal
    Go to V/06, select the tax condition type and execute.  There check whether you have maintained "Condition Class" as D.   If not, maintain D and then retry.
    thanks
    G. Lakshmipathi

  • User needs to delete a line item from old STO

    Hi all,
    User needs to delete a line item from old stock transfer order and would like to be advised what he needs to do to delete the line item from the STO.
    On the STO, Goods Issue done and reversed also. Delivery completed indicator not checked. I aslo found that the payment has been made for the line item 40 for Freight. Carrier charges. It seems that the payment has been made/cleared to the vendor.  I think Due to this reason they are unable to remove this line item from STO. They have attempted to delete or block an item that is not yet closed. All down (advance) payments made to date have been taken into account.
    Can you please advice how to resolve this problem?
    Thanks in advance..
    Regards
    Suresh

    Hi,
    Delivery completed tick is also there for STO PO. If you are not getting it then check settings. Also you can mark deletion indicator for that line item. Or minimise quantity to goods received quantity.
    For STO if delivery is made from delivering plant but Goods receipt not done in receiving plant then that material remains in transit. Can viewed with ME5t. In this case that line item cannot be delted or delivery completed.
    Still your client wants to complete these type also better to leave decision to business if they want to reverse delivery (Stock of issuing plant will increase) or make Gr ( Stock of receiving plant will increase) Although they can adjust later with physical inventry process and make stock in system to real physical stock
    Regs,
    Appie

  • Delete a line item from Sales Doc type RE

    Unable to delete a line item from a sales order linked to document type RE.  Get a long runtime - no specific error message.  Use the 'Stop Transaction' option to end the transaction.
    Have done thorough testing and can delete line items linked to all other sales document types in our system.
    Researched SPRO to see if there was a line item deletion option that was not created for sales doc type RE - but can find nothing.
    On a critical time line here - this was discovered during Hotpak installation testing which is scheduled to move to PRD June 22.  Question as to why we have not run across this issue before now??  - I don't think we have had an occasion to delete a returns line item before - but I want to have the option if available.
    Any help to resolve this issue would be appreciated.
    Regards
    Patsy

    Thanks for your response.
    After creating document type RE, execute VA02 transaction, select line item, select delete line item icon.  The system goes into runtime and just stays there.  No error message, no abap dump.  To escape the transaction, I have to select 'stop transaction'.
    I have tested all other document types we use in our system,  (including our customized transactions) SO, CR, DR, etc., and the system allows line item deletion.

Maybe you are looking for