Unable to connect sqlplus in windows 7
E:\>set oracle_sid=orcl
E:\>sqlplus 'nologs'
SP2-1503: Unable to initialize Oracle call interfa
SP2-0152: ORACLE may not be functioning properly
hi i am installed oracle on windows machine and i am trying to connect through cmd prompt. But its throughing the above errors.
Pls could u help me out on this and how can i connect to database.
Regards
Poorna
E:\>set oracle_home=E:\oracle\product\10.2.0\db_1
E:\>sqlplus /nolog
SP2-1503: Unable to initialize Oracle call interfa
SP2-0152: ORACLE may not be functioning properly
E:\>sqlplus /nolog
SP2-1503: Unable to initialize Oracle call interfa
SP2-0152: ORACLE may not be functioning prope
C:\Users\poorna chander>set oracle_home=E:\oracle\product\10.2.0\db_1
C:\Users\poorna chander>sqlplus /nolog
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
i've done both the ways...but its not working.
Pls get me out of this.
Similar Messages
-
We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issueI have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me. -
Connect sqlplus in windows to oracle in linux
Hi..
I have Oracle Databse 9i for Linux in my PC (used REDHAT ENTERPRISE 3.0).I have installed oracle developer in windows 2000 in the other PC.But i couldn't connected from oracle developer 6 in windows 2000 to Oracle 9i in linux.I have configured tnsnames&listener in linux and they have worked.And i have configured tnsnames in windows too
The messange when i have tried to connected to oracle database by sqlplus :
"unable to connect to destination"
What must i do to make this connection work....?Thank's for responding my question.
My Client PC can ping server (redhat entriprese 3).
Maybe,it better if i write in here about listener and tnsnames :
Listener :
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = OraLite)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_DESC =
(GLOBAL_DBNAME = S92A)
(ORACLE_HOME = /server/oracle/9.2.1)
(SID_NAME = I92A)
Tnsnames.ora :
S92A.world=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Port = 1521)
(Host = 10.14.4.140))
(CONNECT_DATA =
(SERVER=DEDICATED)
(SID = I92A)
It is something wrong with my listener and tnsnamse script.
By the way,my listener is working.
In local, i can enter into sqlplus(external and internal)
But when i used client.
There is a massage :
ERROR:
ORA-12203: TNS:unable to connect to destination
What is going on with my oracle
thank's for reply my question. -
i can't use the windows update program. i think i have to use internet exployer to do this. i tried but it doesn't work.. can firefox connect to the windows update site
== URL of affected sites ==
http://windows updateWindows Updates rely on [[ActiveX]] technology. It's a Microsoft technology that is used to add functionality to Windows programs.
'''Firefox does not support ActiveX technology''' for multiple reasons.
* ActiveX is only available on Windows operating systems, and as a result webpages that require it will not work on Linux or Mac.
* ActiveX integration with the Windows operating system has made it a target for [http://en.wikipedia.org/wiki/Malware malicious software].
Firefox uses [http://support.mozilla.com/en-US/kb/Using+plugins+with+Firefox plugins] to view and use multimedia content embedded in web pages, and [http://support.mozilla.com/en-US/kb/Using+extensions+with+Firefox extensions] to add new functions.
Internet Explorer comes with the Windows OS family by default, and to update the system, please just do '''Start''' > '''Windows update''', which opens IE regardless which browser is the default one. -
Unable to connect to localhost Windows 7 x64, CF9 x64
I've been following along with the Lynda.com tutorial on ColdFusion Builder. Everything went smoothly until the part where I'm supposed to attach CFB to the localhost. The Lynda.com presenter is on a Mac. I am running 64-bit Windows 7 and 64-bit ColdFusion 9 developer edition.
When I would add the local server to CFB, it would sit with status unknown forever. Eventually I would get a message on the console saying
Error retrieving server version. Cannot perform the operation. Check if the server is accessible from web browser.
(I was following the thread about remote connection issues with great interest, but nothing there seemed to apply to my problem.)
I have tried a number of different permutations of installing and configuring the components.
CF9 x64 Stand-alone
CF9 x64 J2EE piggybacking on IIS
CF9 x64 J2EE built-in web server
I tried these with and without the most recent patches to CFB and CF9
With the built-in web server, I tried using cfusion:8300. I also tried creating a new server instance called localhost on 8500. When I tried adding localhost:8500 to CFB, CFB locked up.
I have a feeling that I'm either looking in the wrong place or I have overlooked something obvious. I just thought of one thing I haven't tried... I will try to install the 32 bit version of CF9 to see if that helps.
Any other advice would be appreciated. Is anyone else running CF9 x64 under Windows 7 x64?
--BI decided to check the system reqs for CFB just in case I made an RTFM gaffe.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion_builder
ColdFusion Builder for Windows
* 2GHz or faster processor
* Microsoft® Windows® XP with Service Pack 3, Windows Vista® Ultimate or Enterprise (32 or 64 bit running in 32-bit mode), Windows Server® 2008 (32 bit), or Windows 7 (32 or 64 bit running in 32-bit mode)
* 1GB of RAM (2GB recommended)
* 1GB of available hard-disk space
* Java™ Virtual Machine (32 bit): IBM® JRE 1.5, Sun™ JRE 1.5, IBM JRE 1.6, or Sun JRE 1.6
* DVD-ROM drive
* Eclipse 3.4.2 or Eclipse 3.5 32-bit (for plug-in installation)
So, no 64 bit version, but the 32-bit should work... well - that's one less thing.
I tried 32bit CF9 but the server wouldn't serve any pages. I kept getting a 500.0 error. Adobe has addressed this:
http://blogs.adobe.com/vikaschandran/2010/07/08/altering-application-pools-in-iis-764-bit- to-create-32-and-64-bit-connectors-with-coldfusion-964-bit/
but I decided to shut down IIS and run CF9 as a free-standing J2EE using its own built-in web server.
Once again, CFB locked up when trying to add the new localhost server. I'm going to uninstall and reinstall CFB... -
Unable to connect laptop with Windows 2000
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection. Any suggestions would be appreciated.
The Win2K was wirelessly accessing the internet previously to moving here. This laptop has MA 251 net gear wireless modem card that sticks out of the side. Owner got this laptop several years ago when she was in the Army.
The Win2K cannot see the other 3 laptops.
Sorry but I don't know the answer to your 3rd question.
Linksys service rep suggested maybe needing ethernet cable to get the Win2K connected. -
Outlook clients unable to connect to Exchange / Windows user profile
Exchange 2010
Outlook 2010/2013
I've seen a dozen or so computers in the last few weeks with this problem. The user suddenly cannot connect to the Exchange server in Outlook. (Sorry, I don't have specific error messages for this part.)
If I try a repair on the Email account or try to create a new Mail profile, I get this error:
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
I have verified all Exchange and mail security settings. Outlook configuration is not the problem.
I tried deleting %appdata%\microsoft\outlook and %localappdata%\microsoft\outlook.
I tried a repair on Microsoft Office.
I tried creating a new Mail profile for a different email account.
The only thing that has fixed this problem is a completely new Windows user profile, which tells me there is something else broken in the user profile. Does anyone have any idea what it might be?
Blog /
TwitterHi,
Please try to access Exchange via OWA.
This issue may occur when the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the AppData string value is missing from this
registry key.
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile.
Steps to perform on a working computer
Start Registry Editor. Click Start , type regedit in the Search programs and files box, and then press Enter.
Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
On the File menu, click Export.
Specify the name of the .reg file and then click Save.
Copy the .reg file to the computer exibiting this problem.
Close Registry Editor.
Steps to perform on the computer displaying the above error(s)
Start Registry Editor.
On the File menu click Import.
Locate and select the .reg file exported from the working computer.
Click Open.
Close Registry Editor.
Best Regards. -
Unable to connect Playbook to Windows xp
Playbook will not connect to Windows xp professional 2002 service pack 3.
Does anyone know what version of windows will support playbook ...or if there is a frig to make it work.
The fault is similar to when you try to connect Windows 7 to playbook - the messages are similar but there is a solution to that in the knowledge data base.
Three weeks to get playbook to work with no help is not good !!!!Hey spyder0234,
Welcome to the BlackBerry Support Community Forums.
Do you have BlackBerry Desktop Software installed? If so what version?
And what errors are you receiving?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
I have a HP Photosmart Plus B209a-m. I restored the printer network to default settings and cannot connect to either the new or the old router
TBRM
Welcome to the HP Community Forum.
If you have not already done so, you might try installing / reinstalling the Full Feature Software for the printer.
The installation procedure may help resolve the connection issues.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Photosmart Plus All-in-One Printer - B209a Drivers
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
==========================================================
More Help:
Wireless Printing Center – Replacing your wireless router
Wireless Printing Center – Wireless Printing Videos and Tutorials
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur -
Unable to Connect to SqlPlus on Oracle8i Enterprise Edition
I installed Oracle8i Enterprise Edition Release 8.1.5 for MS Windows NT on my PC at home and has Windows 98, I am unable to connect to SQLPLUS or SVRMGR, it gives an error ,the error is
ORA-12541: TNS: no listener.
Sometimes i get ORA-12560 TNS:Protocol Adapter Error.
I created LISTENER.ORA file and now i am unable to start the Listener.
Please let me know how to configure SQL NET and its components, and also to start LISTENER on my PC.
Thanks & Regards,hi,
compare the entries in listener.ora and tnsnames.ora files.
actually both should match with one another.
Ensure that the supplied destination address matches one of the addresses used by the listener
hope this will solve ur problem. if not send me mail with above those two files.
regards,
arun. -
Unable to connect to internet or print wirelessly on Boot Camp with Windows 7
I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.
-
When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved. -
When clicking on my firefox icon on my wifes Windows Vista computer, I get an "Unable to connect" error. More specifically
"Firefox can't establish a connection to the server at en-us.start3.mozilla.com". The network is working because internet explorer works fine. This just started this morning and continues all day.Thank you for your help and it was a big help. I removed Norton software firewall, and firefox began to work. I thank you for your help and suggestion.
Dennis -
Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik
-
I recently purchased a Linksys EA3500 router and am using it as the sole router in my home network. I have primarily had three devices connected to the network computers/tablets - two running Win7 and one running Win8.1.
The first few days were OK but then the Win 8.1 system would not connect to the network (see the error message below). "Windows was unable to connect..." I tried the problem troubleshooter, power cyclilng the comptuer, power cycling the router. Updating the router firmware to the latest (it added a .1 at the end). Uninstalling and reinstalling wireless drivers on the computer. I've reset the router to factory defaults. I've run the router with and without wifi passwords.
This morning I was able to connect the Win 8.1 system to the network. Not sure what changed overnight. However, today I have had two instances of a different computer, one of the Win 7 systems, suffering the same problem. Different hardware. The Win 8.1 system is an Asus T100 tablet/netbook using a Broadcom 802.11abgn Wireless SDIO Adapter. The Win 7 system is a Dell E6540 laptop using a Dell Wireless 1506 802.11b/g/n 2.4 GHz adapter manufactured by Atheros Communications, Inc.
Last night, when I was having problems with the Win 8.1 system, I should note that it worked fine with the 5 GHz network. The laptop, however, does not support 5 GHz and now that it's suffering the same problem my only work-around is a cellular hotspot.
I'm suspecting the router at this point. Has anyone else seen this? Any ideas what could be causing it, what I could do to fix it or what I might do to help diagnose the problem(s) ? I'm more than willing to run third-party software to analyze and better understand what is happening on a network level (I would actually like to understand as much as anyone is willing to get me started on).
If I am unable to determine why certain systems almost seem to become "banned" from my network while others are working just fine then I'm going to have to return this device and try something else.
Thanks,
Dave
I recenHi @daved31,
You are on the right track. Checking the Wireless MAC Filter is one of the troubleshooting steps. For 2.4 GHz frequency, the suggested channels are 1, 3, 6, 9 and 11. For the 5 GHz, I suggest to use the highest channel. Those channels will give you a better signal, just make sure that no other wireless device is using it to avoid wireless interference.
If only one wireless device is not connecting wirelessly, we should focus on the wireless device itself because we know that the router/access point is working since the other wireless devices are working wirelessly.
I suggest to delete preferred networks on the laptop. Here's the link that may help: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=85537a14b0214be48217c733bba9ac65_Removing_Wirele...
Maybe you are looking for
-
Hi experts I need u r kind help Actually am trying for job in BW. Now I need some requirements about customer generated reports (other than standard SAP reports), which you are doing in your real time and which you may come across with some errors wh
-
Have a lock with a circle around it couldn't find it in the book
A lock with a circle around it appeared in the right hand corner?
-
How can I Business partner Number create manully or Externally In SRM 7.0?
Hello all, I am working in SRM 7.0 1. I am trying to replicate Employee from backend system to SRM, but I want that all Employee have same number in two systems, for example: Employee 1000 in backend shows as 1000(Employee ID or Business Partner ID)
-
Subject from field when submitting a form
Currently, I have a Design Requst form in pdf with fields and drop down menus that people fill out and submit to me as a work orde. However; They are sent in an email with the subject titled the name of the file. I would like to have an action in the
-
I have the lasted iWeb and Maverick. I open iWeb and everything is fine, I can see photo grids, add images, change text...etc. I can publish the site to a folder on desktop and upload it using Cyberduck. However, once I check the website, the photo g