Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Similar Messages

  • Unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    Just a quick bump... Anyone got any thoughts on this?

  • The remote server did not respond to a connection attempt

    I have two Exchange 2003 servers: Old and New. Emails from the new server can go out however, users on the new server cannot receive emails from the old or the internet.
    I get the following error:'....remote server did not respond to a connection attempt....'
    All emails are stuck in newserver.domain.com.
    KimaniBob

    Hi KimaniBob,
    Since Exchange 2003 is a very old Exchange version, we have not supported for Exchange 2003. It is recommended to upgrade your Exchange server to Exchange 2010. Your understanding will be appreciated.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Host did not respond error in connecting the SAP Router from SERVICE PLACE

    Dear Sir,
    We renew the Router Certificate by October 2008.  We are using broadband connection in our office with firewall (ISA) .
    When we try to connect the sap router from SAP Service Market Place, It is connected and after some time, status is changing to Host did not respond due to timeout.
    We checked the SAP Router Tab File also. It is correct.  Guide us to solve this issue
    With Regards
    K.Natarajan

    Hi
    This type of error occurs maximum,only when there is no proper connection between the systems.So,my suggestion is to check with the connection between the systems with the help of Basis person.
    regards
    krishna

  • I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

    I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

    Return it. If you can't return it, turn it over to the police and consider this a life lesson.

  • Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

    Every few days we see two dialogs with the following messages:
    Dialog 1, title: Check for Licensing Compliance is Incomplete
    The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
    Dialog 2, title: Check for Licensing Compliance is Incomplete
    The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
    down in 8 day(s) 23 hour(s) 0 minute(s).
    The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
    The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
    adapter properties. 
    I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
    not an option for this scenario.
    I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
    DNS server configured.
    I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

    Thanks for your response Vivian.
    I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
    never displayed these messages.
    The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
    Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
    There are only 2 user accounts configured on this server. The local admin account and another local admin user.
    The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
    The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
    This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
    shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
    server will shut itself down again in 3 days.
    The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
    on its new network and this is what is triggering the messages?
    Am I clutching at straws here?

  • Ok, so last week I updated itunes on my computer. I have windows vista. Up until that point I was able to connect to the itunes store most of the time, but after that update I have not been able to connect. I have ran the diagnostic test and it says that

    Sorry this is the 1st time on here. The diagnostic test said that I did not have a safe connection. I have even went as far as to delete Itunes from my computer twice and reinstall, but still luck. I have read several suggestions on here, but still to no avail. Please help me!!

    Hi Dalegu219,
    Thanks for visiting Apple Support Communities.
    If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
    You can use these steps to make sure iTunes is opening the library on your external drive:
    If iTunes is running, quit iTunes.
    If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
    If you're using a Mac, open iTunes and immediately hold down the Option key.
    You should see one of these screens:
    Pick Choose Library and locate the library on your external hard drive.
    From:
    iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
    If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
    iTunes: How to re-create your iTunes library and playlists - Apple Support
    Best Regards,
    Jeremy

  • J2ee connection error, "The Message Server did not respond within 60 sec"

    Hi,
    I am facing the error "The Message Server did not respond within 60 sec. Please check if the message server is running.." when connecting to J2ee through NWDS.
    I am able to reach the index page via http://<ip address>:53500/index.html but yet unable to reach through NWDS.
    I have tried various combinations of host and port names like:
    Message Server Host : <ip address>, <host name>
    Message Server Port : 3636, 3936
    but still no luck.
    I've also cross checked the value of message server port by navigating to http://<IP address>:53500/monitoring/SystemInfo too, it is 3636.
    The telnet test (telnet <ip address> <port Number>) draws a blank window.
    I know this problem has been posted again and again, but then I am unable to understand what is the solution to this.
    Can someone please help me in resolving this issue?
    Note: [link 1|Unable to Connect to the J2EE Server from Netweaver Developer Studio; & [link 2|Developer Studio:Exception:The message server did not respond within 60 sec; are already checked.

    Hi Robin,
    Although I still haven't received any info from my colleagues regarding the central instance..
    Just a quick query, if we have NW04 we use 36** and if it is NW04S then we use 39** , is this the only difference for message server port?
    If that is the case, as I mentioned earlier, I have tried both, and one gave me N/A(3936) while the other gave me 'message server did not respond' error(3636).
    I have the message server host name & port , Enqueue Server Host name & Port and SDM PID and Port details with me..
    Can this be anyway useful in establishing a connection?
    Waiting for your inputs...
    Best Regards,
    Vinay

  • I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

    I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
    Can this be done
    Thanks for any and all help

    The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
    The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
    While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
    Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
    If you want to learn more about Time Machine, Pondini is an excellent resource.

  • Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

    Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
    Any ideas would be welcomed.
    Thank you.
    James
    <E-mail Edited by Host>

    Thank you for asking this question.  I'm having the same issues. 
    Liz

  • HT4097 my ipad not responding when i connected to pc

    my ipad2 not responding when i connected to pc, like no device connection to cpu

    Do you mean evil your device is not recognised in iTunes for Windows? If so,
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • The RADIUS request did not match any configured connection request policy (CRP)

    I setup NPS server and added a RADIUS Client access point, my project is to get a wireless user to authenticate using his/her AD credientials, my problem is i can't seem to authenticate my user
    my NPS server is giving me this error log under Event Viewer > Server Logs > Network Policy and Access Services
        Reason:                The RADIUS request did not match any configured connection request policy (CRP).
    but from my understanding i don't need to setup Connection Request Policies because i am using Network Policy
    Please Help!

    thanks for your reply, i setup a new NPS policy here is my error log
    Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    User:
        Security ID:            NULL SID
        Account Name:            csdomain\rsingh
        Account Domain:            csdomain
        Fully Qualified Account Name:    csdomain\rsingh
    Client Machine:
        Security ID:            NULL SID
        Account Name:            -
        Fully Qualified Account Name:    -
        OS-Version:            -
        Called Station Identifier:        0026.992f.6761
        Calling Station Identifier:        2477.0392.b0f8
    NAS:
        NAS IPv4 Address:        192.50.2.2
        NAS IPv6 Address:        -
        NAS Identifier:            MYWAP
        NAS Port-Type:            Wireless - IEEE 802.11
        NAS Port:            35290
    RADIUS Client:
        Client Friendly Name:        MYWAP
        Client IP Address:            192.50.2.2
    Authentication Details:
        Connection Request Policy Name:    PEAP
        Network Policy Name:        -
        Authentication Provider:        Windows
        Authentication Server:        MYSERVER.csdomain.com
        Authentication Type:        EAP
        EAP Type:            -
        Account Session Identifier:        -
        Logging Results:            Accounting information was written to the local log file.
        Reason Code:            22
        Reason:                The client could not be authenticated  because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

  • Trouble about vpn connecting (PPTP VPN did not respond)

    I am new in mac. These days I have searched a lot on line for the solution to this problem but none fixed it. So....
    Our lab only have an instruciton for connecting vpn under windows and I succeeded to do this by following this in windwos 7.
    There is a host name instead of ip address in the instruciton and I think that should not be the problem.
    And in the protocol of TCP/IP property settings, the user was asked to Remove the tick before “Use default gateway on remote network”.  Besides, in the instruction, it sets to obtain the IP address and DNS address automatically, so that I do not have such inforamtion about the server of our lab.
    In my new macbook pro (Mac ox lion 10.7.3), I did the following things:
    1. in system properties->network, Select the + button at the bottom left of the screen to add a new connection.
    2.  Select the following:
    a. Interface: VPN
    b. VPN Type: PPTP
    c. Service Name: SAS VPN
    d. Select Create.
    3.  Configuration: default
        server address: host name “xxx.xx.xxxx.xx”
        account name: (I am sure there is no error in this)
       encryptiong: none
    4. click Authorization settings to input the password.
    5. Click the Advanced button. and Select Options. Verify Send all traffic over VPN connection is checked. (and is not checked ) (I tried both, none of them worked). About the other seetings.
    6. On the TCP/IP tab, set "Configure IPv4" to "Using PPP." So I can not input the DNS server information.
    7. click apply and then try to connect.
    However, it returned me an error said " PPTP-VPN server did not respond. Try to reconnect. If that continues....."
    I think there are lots of experts in mac os x. Can anyone here help me with this? Thanks a lot in advance!

    >> encryptiong: none
    I found out, that you NEED the encryption in Lion Server VPN.
    I understand, that you use Lion Server as you mention the problem here in the Lion Server section.
    I do the following: Install the "Admin Tool VPN" from App-Store for some Euros. Than I found section PPTP and there is a check for
    a) Active
    b) Compression and Encryption
    I take the check for b) out and restart (Off / On), took my XP-Notebook and connected via PPTP and all working!
    Since Lion Apple hide a lot of things from the official tools and if you have some special tools, you can activate function. There is
    Level 1, the userlevel: Something like Dashboard in the new MS-Servers or the Server App in the new Lion Server
    Level 2, the administrator level: The difference between Server App and Server Admin! The Server Tools you need download separatly as you know after a while, something is missing. Same with the new Airport Utility: Userlevel tool = AU 6.0 with grafical fun and some basics, AU 5.6 is the tool for the admin what you separtly need download.
    Level 3, the special deeper view: Typically it is the command line interface, CLI, but if you need some GUI (grafical user interface), you buy an App like Admin VPN Tool and this tool (App for some Euros) in real does nothing else than comfortably set some inside switches and flags that the offical GUI admin tools not have realized.
    Why?
    Oh, I think it's because security issues. You want the Mac Server become like a Microsoft Server? So, you shouldn't use not encrypted connections and that's (in my understanding) the reason why the Lion Server EXPECTS YOU to use encryption and the official tools not give you the oportunity to switch the encryption off!

  • How can I connect my MBA 11" 2012  to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

    I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

    Welcome to Apple Support Communities
    Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
    You can still use your iMac as an external display, using an application like ScreenRecycler

  • HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up.  My pc is running windows 8.1 os.  I do not see that os in the list of operating systems.

    I am trying to install a new iPod Shuffle and my pc does not pick it up.
    My operating system is Windows 8.1 and windows 8 does not appear
    in the list of operating systems.

    You are referring to OFFICE 2010, not Windows XP or 7.
    And which version of Windows do you have?
    NEVER begin before you have a backup, ideally one you have tested and know works.
    You don't really install Boot Camp, the Assistant is a partition tool utility.
    You may just want Office 2008 for Mac.
    If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
    Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
    IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
    Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

Maybe you are looking for

  • Finder icon on dock doesn't respond

    Hi, the finder icon in the dock does not open any window when I click it. This is problem is limited to my account.

  • CO60 Time out

    Hello Experts, I am runing the transaction code CO60 to display the PI sheet,but it is resulting in a short-dump as a result of time out. This is happening with only one sheet. can we increase the time line to execute this particular trasaction ? I f

  • Feedback node strange behavior

    So I just recently discovered the feedback nodes and I am trying to use them to control my instrumet, so that if I change a setting, the feedback nodes sees the difference and preforms a visa write.  There are 5 parameters to control, 1 to select a r

  • Disappear and Re-appear Act

    I have a iPhone (new model) and just downloaded the latest 2.2.1 update. This morning my contacts (all of them) just disappeared! Then after turning the device on and off I saw an "emergency number" message that went no place. Turned off and on the d

  • With only 436mb backed up to mozy from my old mini 10.4.11 would it not be easier to download from mozy to my new mini rather than xfer files manually?

    I'm told this might take longer but considering the minimal amount of files....? I'm a novice and I'm reading posts where people seem to be having problems transferring files manually.