Unable to connect to DNS 323 after switch to Airport Extreme even after factory reset

Hi everyone,
I have a NAS that I love and have more then my entire life on. I've had it for a long time and it's almost full. Any solution including to format the drives will be shunned.
The NAS has worked fine for a long time since I set it to a static IP. Last week I installed the Aiport Extreme and the NAS was lost. The new IP series start at 10.., and the old at 192... something.
I've searched the web for ideas and the best ones seem to be hooking up the nas to the old router and removing the ip adress. That's a mess. I tried to reset the configuration to facotry settings but that did nothing. I can't find the NAS on my PS, the DLink easy search utility comes up blank.
Any ideas?

Thank you very much for your reply, I'm sure that it would have worked but something better,more magical happened. It automatically set itself!!
Sometimes I love technology. I resetted the NAS twice. Once with the networkcable in it, and once directly after without the network cable in it. And then I called it a day. Surfed a little and pondered the mess of taking down the NAS from the high half hidden shelf and pulling out the old router, finding this above possible solution and planned to do it another day.
Today I saw that the NAS had appeard on the network! I could access the web interface and set password and static ip from the dynamic one.

Similar Messages

  • Unable to connect hp photo smart 4780 to new airport extreme?

    Just purchased airport extreme.  Have an HP Photo Smart C4780 and can not get it to link with extreme or MacBook
    Pro laptop.  Can anyone help me??

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • Unable to connect to Apple TV after install Mavericks

    Hello I'm unable to connect to Apple TV after install Mavericks. :-(
    The icon of the Apple TV no longer appers on the top menu and my Mac is unable to discover it...
    The Apple TV Box is upedated to the most recent software version.
    Apple TV is connected to the same Wifi network of my Mac
    I have a:
      Mac Book Pro 13-inch, Early 2011
      Processor  2,3 GHz Intel Core i5
      Memory  4 GB 1333 MHz DDR3
      Graphics  Intel HD Graphics 3000 384 MB
      Serial Number  <edited by host>
      Software  OS X 10.9.2 (13C64)
    Can anyone help me ????

    Hello M.A.S.Ramos,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
    http://support.apple.com/kb/PH14375
    Make sure your Mac and your Apple TV are on the same network.
    Choose your Apple TV from the AirPlay status icon in the menu bar.
    Choose This Mac or your Apple TV depending on how you want to match the desktop size of your Mac.
    OS X automatically detects an Apple TV when it’s on the same network, and displays the AirPlay icon in the menu bar. When AirPlay Mirroring is active, the status icon is blue.
    Have a nice day,
    Mario

  • Unable to connect Wi-Fi network after ISO 6 update

    unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

    I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • If a lost or stolen iPod touch is reset by the finder, will I still receive notifications through Find My iPhone if it connects to Wi-Fi after the reset?

    If a lost or stolen iPod touch is reset by the finder, will I still receive notifications through Find My iPhone if it connects to Wi-Fi after the reset?

    If the device is completely reset and restored to defult settings, then it will not notify you because all the account informmation will have been removed. (Which is probably a good thing too)
    ~Lt. Leviathan

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • Time capsule setting up problem after factory reset

    What's the next step after factory reset to set up my time capsule again???
    i did factory reset for 4-5 times and i cant use my time capsule to create a network, join an existing network or anything else.
    i also tried normal reset but still nothing can be done.
    There is always a message at the end " an unexpected error occured. Try again"

    Plug the TC into the computer by ethernet..
    Make sure the computer has no other network running and nothing else is plugged into the TC.. just TC Lan port to the computer ethernet.
    Now press reset and open airport utility.
    Generally you will have no issue once it is isolated. Do the setup and then you can disconnect and put it back in the network.
    If it doesn't work, is the LED on the TC flashing amber or what??
    Is the ethernet port connectivity LED on?

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • Data recovery after factory reset

    I have seen people write that data recovery was possible after factory reset below the jelly bean OS versions on android but iphone is impossible.
    So I wonder what is security technology for data protection on iphone.
    Let me know security technology. (data encryption, data fromat algorithm, whatever about data protection)

    Follou-up..... reading other questions/answers on this forum seem to indicate I'll have to "cherry pick" specific saved data items from the desktop "Shortcut to System Recovery Files" --- a long process.   Is there a quicker way???

  • Cisco 7941G phones will not boot up after factory reset.

    Cisco 7941G phones will not boot up after factory reset.
    The following happens.
    1. Speaker light lit (Green)
    2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
    3. Saw Cisco logo with a Java Powered page.
    4. The whole thing loops again and again...
    I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
    Please help.

    How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
    Sounds like too many devices trying to use TFTP at once.

  • HT5312 phone activation after factory reset

    Will a factory reset require reactivation of phone service with the carrier

    Hi, SBtaylor. 
    The iPhone will require the previously used SIM or a valid activated SIM after factory resetting the device. 
    Using an iPhone without a wireless service plan
    http://support.apple.com/kb/HT3406
    Cheers,
    Jason H. 

  • Recovering data after factory reset (security issue)

    Hello there,
    Recently a friend of mine asked me how to erase all data on an iPhone ? I pointed to him to "factory reset".
    Now, I see a bunch of websites that show how to recover data after factory reset using their software, not sure if they work as advertised or not.
    What I would like to know is if the user wants the data to be erased and non-recoverable, is this the best option or if there is any other option available in iPhone that can make the data un-recoverable. We want to make sure the data is un-recoverable after factory reset.
    thanks
    Ashish Shah

    unfortunately this doesn't answer my question.
    I do know the option to "erase all content and settings" in iPhone.
    What I want to know is to make sure once done, no one can recover that data back. Since this phone will be sold off to some stranger, we don't want them to have access to the data.
    Here are a few websites from my just preliminary search results that show how to recover data.
    just google "extracting data after factory reset iPhone" and you will see a bunch of websites offering their products to recover. So I want to check if this is so simple, how can we really make sure the data is wiped off clean.
    Ashish Shah

Maybe you are looking for