Unable to connect to Oracle 11g server using instantclient_11_1 in AIX

Hi,
I downloaded instantclient-basic-11.1.0.7.0-aix-ppc64.zip from oracle site and used the same for connection to 11g server for testing my application on AIX 5.3 machine. I am also using easysoft driver for the connection. But I am uhnable to connect to Oracle 11g server from AIX 5.3 using instantclient_11_1 client
libraries. I get the error "Could not load oracle libraries". Error is as below:
WARNING: Setup was unable to contact your ORACLE
WARNING: server by using the connection options
WARNING: you specified.
WARNING: Error connecting to DB: -1
WARNING: HY000: [unixODBC][Easysoft][Oracle]Could not load oracle libraries
But I could connect to the same server from AIX 5.3 machine using instantclient_10_2 libraries and same eaysoft drivers successfully.
Looks like there is issue with connecting with instantclient_11_1 client libraries from AIX 5.3. I also tried with using 11.1.0.6.0. Same issue is observed.
Did anybody else face similar issue?
Thanks and Regards,
Prema S
Edited by: user6404935 on Jan 27, 2010 9:47 PM

I you find nobody who has the same problem, here are some hints:
- Try to connect using "sqlplus" from the instant client. If that fails, there is probably a problem with your setup.
- Look if the Easysoft driver supports Oracle 11.1 as client.
Yours,
Laurenz Albe

Similar Messages

Unable to connect to oracle 11g db using ODBC/OCI in OBIEE rep

Hi, i have windows 7 , 64 bit, oracle 11g R1, obiee 11g.
Trying to connect to oracle 11g db when working on OBIEE rep, but the connection fails when connecting through odbc/oci. Any imput is appreciated.
Thanks,

you must add a TNS names entry to your tnsnames.ora file @ ORACLE_HOME\network\admin
if not open the connection pool add the tns entry starting from "(DESCRIPTION=....
followed by user id and password

Connection to Oracle BI server using BRIO

Hi,
I read in the administrator manual that it's possible to connect to Oracle BI Server with third-party tools over ODBC. The instructions say to configure a DSN on the remote machine using the Oracle BI Server driver. Does this mean that I need to install this driver or perhaps a client this driver is packaged with in order to complete this connection?
Is there some other way to connect to Oracle BI server using Brio?
Any help appreciated.
Thank you!
Some background:
We have Oracle BIEE 101320 installed with connections established to our warehouse. We have Oracle Answers (Siebel Analytics) configured and have dashboards running off the BI server.
There are a lot of folks here who use Brio. We'd like to get them to connect to the Oracle BI server rather than to the data warehouse.
--Josh
Message was edited by:
user598511

Hi
We are a Hyperion partner and have just started looking at Oracle BI Enterprise Edition. When I installed it it automatically creates an ODBC DSN on the server called AnalyticsWeb. I am working directly on the server and I can then connect using Hyperion Interactive Reporting Studio using an oce which points to the DSN. So Brio Explorer/Designer would be the same. Working on a separate client machine I guess you would need a DSN on that machine. Not sure you would do this but if you do a custom install on the client of the client tools, you should see Oracle BI Server as a data source.
BUT...
I imported the Hyperion Sample database into the Oracle metadata repository using the Admin tool, and then connect to it using Hyperion IR studio. While I can see the tables in the catalog, when I drag them into the Datamodel, they just disappear. I would be interested to see what you get.
Cheers
Bob Pentney
Indigo NZ

Unable to connect to the Exchange server using HTTP/HTTPS protocol.

hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............

<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>

<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"

connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>

<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>

<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?

Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the 
comment which you placed inside the "<cfexchangeConnection>"
tag.

Connect to Oracle 9i server using oracle 11g client

Hi,
my oracle 9i server is on unix machine.
I got new Window 7 64 bit machine for .NET code development(framework 4.0).It is having Oracle 11G installed.I am getting oracle connection error while running .NET application.
what changes (connection string/tnsnames.ora/others) will I have to do to connect Oracle 9i server using oracle 11g client ?

Hi,
Please post the complete error stack you are getting.
Regards
Yoonas

Connecting to oracle 11g XE using forms 6i

Dear sir
i would like to connect to my database in oracle 11g xe using forms 6i; i have tried with normal procedure of defining a service name locally and connecting thru that, but it didn't work, forms 6i crashes while tring to connect to database. can anyone help me to do that?
thanks in advance
uday

911781 wrote:
yes tnsnames.ora i have configured accordingly
please find below the contents of respective tnsnames.ora
forms tnsnames.ora
CRMXE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xe)
database tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-E929IBU4N98.derivequity.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)Hello, Uday
copy bellow TNS to your forms TNS
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-E929IBU4N98.derivequity.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)It's just TNS Problem...
Hope it works...
If someone's response is helpful or correct, please mark it accordingly.

Oracle 10g client connect to oracle 11g server

Hi All,
In my system, i have installed oracle 11g server(11.1.0.6.0). while i try to connect to this server by 10g client in my friends system,which is in the same network,it is showing
ORA-12545: Connect failed because target host or object does not exist,
then i tried with other system (using oracle10g client), its showing
ORA-12154: TNS:could not resolve the connect identifier specified
then i tried with one another system (using oracle 9i client) -- its is connected.
what may be the problem. not connecting using oracle 10g client. and also different error.

user12479258 wrote:
Hi,
The client version is 10.2.0.1
this version may not be connect to oracle 11g?
If so then which are the client version will connect to oracle11g server(11.1.0.6.0).A 10.2 client will connect to an 11.x database, but the sqlnet.ora and tnsnames.ora files must be configured correctly. The errors you reported are not uncommon and have been diagnosed repeatedly on this forum. Let's not confuse the issue by comparing / copying files from various machines, as that has already created a moving target of error messages.
On the client that is exhibiting the problem ...
Do you have a single ORACLE_HOME? A single TNSNAMES.ORA?
On that machine, at a command prompt, do a tnsping on the service in question. Also try to connect with sqlplus. Copy the entire session -- commands and results -- and paste it all back here.
On the server machine, log on as the owner of the oracle software, and at a command prompt enter the command "lsnrctl status". Again, Copy the entire session -- commands and results -- and paste it all back here.

ORA-12504 error when connecting to Oracle 11G DB using OCI and instantclient-basic-nt-11.2.0.3.0.zip

Dear Friends,
I am using OCI and instant_client (11.2.0.3.0) in my C++ program (on Windows 7) to connect remotely to 11G database.
While doing a connection using server name as well as servername:port/service_name as connection strings, I am getting error of ORA-12504 TNS:listener was not given the SERVICE_NAME in CONNECT_DATA.
According to instant client FAQ & white paper at http://www.oracle.com/technetwork/database/features/instant-client/index.html, no tnsnames.ora is required for instant client. Then why could I be getting this error?
I ensured that only the instant client directory is in Path environment variable. There was a ODBC driver installed on this same host. Could that be modifying the behavior of instant client?
Kindly guide.
Many thanks in advance for your help and time.
Best Regards,
- ganesh

>>what is the exact connect string you are using?
For connection, I am using the plain hostname on which the DB server is running.
>>are you calling OCIServerAttach before OCISessionBegin?
I am not using OCISessionBegin. For connecting to DB server, I am using the following sequence of OCI calls (in this same order):
1) g_OCIEnvNlsCreate
2) g_OCIHandleAlloc //-- error handle: OCI_HTYPE_ERROR
3) g_OCIHandleAlloc // --- sevice context: OCI_HTYPE_SVCCTX
4) Setting driver name and application name for the session:
    OCISession* usersession = 0;
    ret = g_OCIAttrGet(m_pSvcCtx, OCI_HTYPE_SVCCTX, &usersession, NULL,
                             OCI_ATTR_SESSION, m_pErrHdl);
    if (ret == OCI_SUCCESS)
        ret = g_OCIAttrSet(usersession, OCI_HTYPE_SESSION, (void*)"OCI_DRV", 2,OCI_ATTR_DRIVER_NAME, m_pErrHdl);
        ret = g_OCIAttrSet(usersession, OCI_HTYPE_SESSION, (void*)"ClientApplication", <ub4>(strlen("DataReconScanning")), OCI_ATTR_CLIENT_IDENTIFIER, m_pErrHdl);
5) g_OCILogon() using the user, password and host name, as below:
g_OCILogon(m_pDbCon, m_pErrHdl, &m_pSvcCtx,
                               (text*)user.c_str(), static_cast<ub4>(user.length()),
                               (text*)pass.c_str(), static_cast<ub4>(pass.length()),
                               (text*)host.c_str(), static_cast<ub4>(host.length()));
Thanks.

Connecting DB Oracle/SQL server using the same SQL Navigator release 5.1.0

I have
SQL Navigator release 5.1.0.655 installed in my desktop
License version X-pert Edition
Licensed Options
PL/SQL Debugger
CodeXpert
Knowledge Xpert For Pl/SQL
Xper Tuning
Currently I have the access of Oracle DB using this SQL navigator and MS-SQL server using MS-Sql server Query Analyzer
My question is -- using the same SQL Navigator can I connect MS-SQL server DB/Tables and can I run sql query using this..
Thanks in advance.
Mash

Why, in an Oracle forum, are you asking a question about a Quest product connecting to a Microsoft product?
How does this relate to the Oracle Database?

IE unable to connect to Oracle HTTP Server v10.1.2 with SSL

Hi,
I configured OHS with SSL to run APEX applications.
This configuration can be run from Mozilla browsers and Opera, but not from Internet Explorer.
I suspect that IE doesn't support 256-bit encryption, as both browser above support it. So I set several combination of SSL Cipher Suite in ssl.conf. I also set IE to use TLS v1, SSLv2, and SSLv3. But this doesn't show any results. I also found that several sites which has 256 bit encryption (read the information from Mozilla and Opera browser) can also be opened by IE (read as 128 bit encryption). So I guess the encryption is not the problem, and I move on to the Apache error_log files.
What I found from Apache's error_log.xxxx is
[error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server ---.---.com:4443, client --.--.--.--)
[error] mod_ossl: Unknown error
[error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 28864 (server ---.---.com:4443, client --.--.--.--)
[error] mod_ossl: SSL IO error [Hint: the client stop the connection unexpectedly]
So I looked in the Metalink and found Note:312041.1 and applied patch 4960210 and restart the server. But now it wouldn't start at all, despite that all configuration files were not changed.
Any help would be greatly appreciated.
Regards,
Aulia Bismar

You can use any PKCS#12 file with OHS if it includes the complete private key and certificate chain. With Oracle Wallet Manager (owm) you could also create a private key, import it, import the CA certificate as trusted certificate, create a certificate request for the private key, get the certificate response from the CA and import this.
If you use an unsual CA, ie cacert.org, you must import the CA root certificate as a trusted server certificate for IE.
--olaf

Unable to connect to Oracle 9i database using Developer/2000

Currently we're using Developer/2000 and Oracle 7.3 Database in Client/Server Environment.Our problem is initially we want to just upgrade the database from 7.3 to 9i and connect our clients through Developer/2000.It always gives TWO TASK COMMUNICATION ERROR .Can someone please help me in this way.Thanks in advance

make sure that "sun.jdbc.odbc.JdbcOdbcDriver" is on your classpath ,

Unable to connect to your database server using the provided settings?

can anyone help me, I keep getting this error message in Safari... how do I fix this?

Hi,
That sounds like it's an error on the server of the website you're trying to access. A bit more information would confirm this - what is the site?

How to connect to Oracle 11g using thin driver with service name & SID

Hi Experts,
Wish to know whether there is a common way to connect to Oracle 11g server using SID or service name.
Earlier I used jdbc:oracle:thin:@<<server>:<<port>>:<<SID>> for connecting to individual Oracle server instances.
Now I need to connect to Oracle RAC which provides service names. So I need to use jdbc:oracle:thin:@<<server>:<<port>>/<<service name>>.
This connection string is internally constructed by a program and user inputs <<server>>, <<port>> and <<SID>> or <<Service Name>>. Now this requires two different connection strings based on the input whether its SID or service name.
Is there a common connection string for these two? Based on some articles like this, I understood that we can generically use jdbc:oracle:thin:@<<server>:<<port>>/<<service>>, whether for SID and service.
When I tried this format with SID, I am getting the below error. What I tried is jdbc:oracle:thin:@myoracleserver:1521/ORCL, where ORCL is the SID
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Request your help in solving this. What I want is a single connection string whether its SID or service. Any help is of great value.
Regards
Sunil

Wish to know whether there is a common way to connect to Oracle 11g server using SID or service name.
Earlier I used jdbc:oracle:thin:@<<server>:<<port>>:<<SID>> for connecting to individual Oracle server instances.
Now I need to connect to Oracle RAC which provides service names. So I need to use jdbc:oracle:thin:@<<server>:<<port>>/<<service name>>.
This connection string is internally constructed by a program and user inputs <<server>>, <<port>> and <<SID>> or <<Service Name>>. Now this requires two different connection strings based on the input whether its SID or service name.
Is there a common connection string for these two? Based on some articles like this, I understood that we can generically use jdbc:oracle:thin:@<<server>:<<port>>/<<service>>, whether for SID and service.
When I tried this format with SID, I am getting the below error. What I tried is jdbc:oracle:thin:@myoracleserver:1521/ORCL, where ORCL is the SID
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Request your help in solving this. What I want is a single connection string whether its SID or service. Any help is of great value.
Oracle has an entire book for JDBC: The JDBC Developer Guide.
There are chapters that provide ALL of the connection properties and the rules for creating connection urls.
http://docs.oracle.com/cd/E11882_01/java.112/e16548/urls.htm#BEIDBFDF
See table 8-3 in that doc

Listner issues in Oracle 11g server installation

Hi,
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.
Listener and TNSnames.ora files are fine. But I am not able to connect through Oracle client machine. it shows 'TNS: Could not resolve the service name'.
When I check the listener status on the server, it shows the service ABBPROD is READY, but still not able to connect through client machine. I have gone through many similar threads and tried out the solutions provided but the problem still exists. Few of the things I tried are as below.
1. I have tried changing the ORACLE_SID and setting the $ORACLE_HOME parameter.
2. Tried replacing the HOST as 'localhost' to system IP address/computer name
3. Listener stop and start
4. Service stop and start
5. Checked the firewall settings of the server machine
I shall paste the listener.ora and tnsnames.ora files below.
LISTENET.ORA
# listener.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
      (SID_NAME = ABBPROD)
      (ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\INSAJEN
TNSNAMES.ora file
# tnsnames.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ABBPROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.233.130)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = abbprod)
LISTENER_ABBPROD =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SQLNET.ORA
# sqlnet.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)Please help me to debug and resolve the problem. If any more information is required, please let me know

SBH wrote:
I checked the global_name, it is ABBPROD.asiapacific.abb.com...
I tried setting the ORACLE_SID same as this name, but still the same issue exists
@Mahir, this is a production environment, and I cannot take risk of rebuilding tnsnames and listener.ora filesand
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.Your production sever running on Windows 7 EE 32bit?

Error while creating a JDBC connection to Oracle 11g using WLS 6.1

Hi
I am trying to connect to Oracle 11g database on Weblogic 6.1 server.
First of all i would like to know if this is compatible?
The environement that i have is this
1. JDK 1.3
2. Database 11g is on remote system
3. Oracle client on my local system ( Connecting to the 11g DB through the client works fine)
4. Weblogic server 6.1
5. Currently the application is connected to Oracle 10g DB and working fine(We are attempting to move it to 11g)
Below are the steps that i followed to create the connection:
1. Made an entry for the datasource in config.xml under <WLS_DOMAIN>/config folder as below
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
MaxCapacity="4" Name="CADConnectionPool"
Properties="user=abc_proxy;password=proxy_abc;dll=ocijdbc8;protocol=thin"
RefreshMinutes="5" ShrinkPeriodMinutes="10" Targets="CAsvr"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@gen11t-ora.db.lab.xyz.com:1530:GEN11T"/>
2. Restarted the server.
3. Ran the application and get the following error on the server console:
<Aug 22, 2011 12:39:42 AM CDT> <Error> <JDBC> <Cannot startup connection pool "C
ADConnectionPool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.lang.ArrayIndexOutOfBoundsException
at oracle.security.o3logon.C0.r(C0)
at oracle.security.o3logon.C0.l(C0)
at oracle.security.o3logon.C1.c(C1)
at oracle.security.o3logon.O3LoginClientHelper.getEPasswd(O3LoginClientH
elper)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:289)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:251)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:246)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Can't load scjd12.dll, file not found java.library.path=C:\jdk1.3.1_11\bin;.;C:\WINDOWS\system32;C:\WINDOWS;.\bin;C:\P
rogram Files\Lotus\Notes\Data;C:\Program Files\Lotus\Notes;C:\Program Files\Java
\jre1.5.0_17\bin;C:\Program Files\Java\j2re1.4.2_06\bin;C:\Oracle\bin;C:\Program
Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\sys
tem32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\sys
tem32\nls\ENGLISH;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Rational
\common;C:\Program Files\Rational\ClearCase\bin;C:\apache-ant-1.6.5\bin;C:\jdk1.
3.1_11\bin;C:\Program Files\Citrix\ICAService\;C:\Program Files\Citrix\System32\
;Z:.
<Aug 22, 2011 12:38:06 AM CDT> <Info> <JDBC> <Sleeping in createResource()>
<Aug 22, 2011 12:38:07 AM CDT> <Error> <JDBC> <Cannot startup connection pool "c
ispool" weblogic.common.ResourceException:
Could not load 'com.neon.jdbc.Driver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:212)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Would like some help on this asap as the project is in critical stage.
Thanks

The driver being used by your weblogic is too old and incompatible with the DBMS. Upgrade the driver.

Unable to connect to Oracle 11g server using instantclient_11_1 in AIX

Similar Messages

Maybe you are looking for