Unable to connect using system after installation...

Hello,
I'm running Fedora (core 7) and have installed "oracle-xe-univ-10.2.0.1-1.0.i386.rpm" (universal). I've configured it with all the defaults.
I can navigate to the "home page" but whenever I try to login I get an error saying "invalid username/password". My password is test and I've tried with username "SYSTEM", "SYS", "system", "sys".
All of this is being done as root (the install was also done as root).
Anyone have any idea what's happening here???
Thanks!

Try following command , reset password and try
su - oracle
cd /usr/lib/oracle/xe/app/oracle/product/10.2.0./server/bin
# on bash or ksh
. ./oracle_env.sh
sqlplus "/ as sysdba"
alter user system identified by test;
- Virag Sharma
http://virag.sharma.googlepages.com/

Similar Messages

BPCNW 7.5 SP7 - Unable to connect to backend after installation

Hi Experts,
I have installed the BPC NW 7.5 SP7 with CMS authentication but when i launch the BPC server manager, it ask for user id and password. But when i enter the password for the bpc_sysadm, it gives the error "unable to connect to backend Abap system"
I am stuck and urgent help is required.
In backened, entry in the table UJA_SVR_DEFAULT is the hostname of of CMS.
I dont have sapmsg.ini file under c:
Windows as shown in the below log. Does it matter?
Below is the error log
2.0 #2011 08 14 20:06:39:223#+2:00#Error#ServerMgrService##EPM-BPC-NW##dbaf8fa3-8af1-478e-8091-082680638a84###TestConnection#BPC_SYSADM########Plain##<Exception><ExceptionInfo><exType>SAP.Connector.RfcException</exType><exMessage>Open file 'C:
Windows
sapmsg.ini' failed</exMessage><exSource>SAP.Connector</exSource><assembly>SAP.Connector.Connection, SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23</assembly><stackTrace> at SAP.Connector.Connection.Open()
 at SAP.Connector.Connection.BeforeCall(SAPClient sapclient)
 at SAP.Connector.SAPClient.BeforeCall()
 at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
 at SAPServerMgrProxy.SAPServerMgrProxy.Uja3_Get_User_Langu(UJ0_S_USER Is_User, String& E_Langu, UJ0_T_MESSAGE& Et_Error)
 at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.GetUserLanguageProxy.getABAPUserLanguage()
 at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.init(Hashtable htContext)
 at OSoft.Services.Common.ApplicationServiceProxy.ContextUser..ctor(String contextXML)
 at Osoft.Services.Webservice.ServerMgrService.ServerMgrService.TestConnection(String strParameter, String strContext)
</stackTrace><exTime>8/14/2011 8:06:39 PM</exTime></ExceptionInfo><WebServiceLayer><machineName>SVRMSA030</machineName><userName></userName><csnComponent>EPM-BPC-NW-SRV</csnComponent><className>ServerMgrService</className><MethodInfo><methodName>TestConnection</methodName><Params><strParameter></strParameter><strContext>
<Context>
<AppSet>
</AppSet>
<UserID><![CDATA[BPC_SYSADM]]></UserID>
<App><![CDATA[]]></App>
<Language><![CDATA[]]></Language>
<Session>
<SessionID><![CDATA[]]></SessionID>
<Machine><![CDATA[]]></Machine>
<Machine_Name><![CDATA[SVRMSA030]]></Machine_Name>
<ModuleName><![CDATA[]]></ModuleName>
</Session>
<CurrentView>
<Dim>
<Name></Name>
<Value></Value>
</Dim>
</CurrentView>
</Context></strContext><strSecurity>
<SECURITY>
<CheckSum><![CDATA[4jyETibRHl1Mk3AfQ/l9m8tNWjE=]]></CheckSum>
<IsZipped><![CDATA[False]]></IsZipped>
<IsEncrypted><![CDATA[True]]></IsEncrypted>
</SECURITY></strSecurity></Params></MethodInfo></WebServiceLayer><additionalInfo></additionalInfo><displayMode>ERROR</displayMode></Exception>#
Regards
Sagar
Edited by: sagar chouhan on Aug 14, 2011 11:30 PM

Thanks for your reply. I tried using "BPC_SYSADM" and "BPC_ADMUSR" but for both the users I am getting the same error. i checked the servername in the connection wizard it is correct. I am doing this for first time after installation.
In the backend, i checked the table UJA_SVR_DEFAULT and the entry for all the 3 fields are as below
ADMIN -- CMS hostname
SYSADMIN - CMS Hostname
USER -- CMS hostname
Regards,
Sagar

Unable to connect to db after installation

hi all, am having problems in connecting to my oracle10g xe database after installation. each time I try to connect, it displays ORA-12560: TNS:error adapter protocol. pls I will appreciate your anticipated assistance.
thanks
jideofor

How are you trying to connect?
Are you connecting from a client? From the local machine?
What operating system are you on? What operating system is the server on if this is a client?
There are many questions...
The most common answer to your overreaching issue is going to be "specify a service name." If you want more specifics than that, we're going to need more information.
~Jer

Unable to Connect to WiFi after iPhone power off; WiFi & internet are working with MBP; common problem, no solutions?

Here's my setup: Internet <> Comcast/xFinity supplied cable modem <> new Apple Time Capsule <> iPhone 4 & MacBook Pro (see below for hardware details)
Internet on my iPhone 4 has been acting slow since yesterday evening. My MacBook Pro was running fine, but just to be sure I checked the Comcast website to see that I have only used 50GB of my allotted 250 GB of data for the month, so it's not that.
I decided it must be a problem with just my iPhone, so I opened up the multitasking bar and quit everything in there manually, and then I held the on/off button, and slid the slider to power off. When I started back up, I could not connect to the same WiFi I had just been using. I tried to reconnect and nothing. I tried to forget the network and try again, nothing. I tried to reset all network settings, nothing.
I have tried all the steps listed here: http://support.apple.com/kb/TS1398 "iOS: Troubleshooting Wi-Fi networks and connections"
Toggled WiFi off and back on
Made sure I am in range of the router (it's about 8 feet away and my iPhone reports full signal from the network)
Made sure all the hardware is connected and on
Checked other devices (I'm successfully connected with my MacBook Pro right now)
Checked for router firmware upgrades (I have a new Time Capsule from Apple with the current 7.5.2 firmware which I've been using for a month)
Restarted my device (again)
Checked that the network is available (it does show on my iPhone)
Restarted my Time Capsule
Checked my router configuration as described here: http://support.apple.com/kb/TS3727 "Wi-Fi: Unable to connect to an 802.11n Wi-Fi network" which involves simply checking to see that WMM is turned on, also stating that WMM cannot be enabled or disabled for Apple's AirPort products.
Reset my network settings (again)
I have searched and searched for fixes to this problem, and I have additionally tried:
Enabling/disabling Airplane Mode
Disabling any network password protection/encryption (no luck), re-enabling it (no luck)
Changing the network password
Checking for hardware addresses present in iOS Settings > General > About (they are present and not zero'ed out)
Switching Bluetooth off (nothing) and back on (nothing)
....and probably a few other things I can't think of right now
I have yet to try:
The "Freezer Trick" which apparently involves chilling the iPhone to get a temporary fix?
Restoring the iPhone (I would really rather not)
A different WiFi network (other than my own Time Capsule home network or guest network, both of which give the same Unable to Connect error)
So, after all of that, are there any more ideas? Is there a reliable solution to this issue? So far I've just seen a lot of "mess with the settings," "the freezer trick worked," and "blame it on the iOS 4 update."
Here are my hardware details:
iPhone 4; iOS 5; 32GB; AT&T; no cellular data plan (July 2011)
TimeCapsule6,113; Firmware 7.5.2; 2TB (September 2011)
MacBook Pro 3,1; Mac OS X (10.7.2); 2.4 GHz Intel Core 2 Duo; Hi-Res Display; 4GB RAM; 500GB HD (August 2007)
...and the Time Capsule config:
http://cl.ly/BCUt

Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
Jinkies.

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
== This happened ==
Every time Firefox opened
== Since I downloaded Firefox

same here my AV is ESET, i already unblock it but no use can't connect to the internet..

Fire fox will not open, page says unable to connect. using 7.0.1

Fire fox will not open, page says unable to connect. using 7.0.1

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
and it failed with error code 0x80070643. Now when we open the DPM Console
it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
In the eventlog we get a lot of Errors and warnings:
Event 941 (MSDPM)
Unable to connect to the DPM database. Make sure that SQL Server is running and that it is configured correctly.
Cannot open database "DPMDB" requested by the login. The login failed.
Event 4209 (MSDPM)
The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM Writer encountered an internal error. Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
Event 107 (Report Server Windows Service (MSSQLSERVER)
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event 274 (SQLISService110)
Microsoft SSIS Service:
Registry setting specifying configuration file does not exist.
Attempting to load default config file.
Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
I think the failed Installation changed some database Settings, so that now the DPM Console
cant access the database anymore.
I would be happy if someone can help me getting this Server working again!

Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
Tomorrow I try to restore the database and hope it will be the solution of our problem.

Unable to Connect to Database (after server has been re-started)

Hi, I use Essbase Admin Services 7.1.3 and the server was not responding, therefore our IT guys re-started it. Since then I am unable to connect to one of the applications. I have tried to start/Stop the application but it just says "Application did not start". There are 6 databases in this application altogether (3 data and 2 Currency). The application has been there for about 3 years (it holds historic sales data) and there has never been any problems with it. When I tried to Start the application, in the message panel at the bottom it says "Error: 1013015 Unable to Connect to Database (2003)". It's as if there is a problem with this 2003 database but the 2002 and 2004 database are OK. Has anyone ever had this problem and knows how to rectify it?? Thanks in advance. Sarah

It may be that the server restart corrupted the database. Go into database properties and uncheck the box start database with application and then try to restart the application. You can try database validation, or simply reload the database from backup. But you can get the application up and the rest of the databases up by decoupling the database restart from the application start. There will be a .xcp log file in your application directory (and possibly your database directory.) These might help Hyperion Support in identifying the cause of the problem. But the quickest solution would be to reload the database from backup. The serer and application logs can also provide help in identifying the problem. One of the keys is to determine why the server is not responding before restarting the server. It may be that a single application is the source of problem. Typical causes are unscheduled free space restructures, application loads of large databases, and an occasional rogue process. Rather than rebooting the entire box, or even restarting the Essbase server, the safest approach is to only kill the job that is soaking up the cpu cycles, causing the server to be unresponsive. This requires identifying the offending process (esssvr.exe) and killingit. Often that restores the rest of the system to operations, giving you time to focus onthe offending application. You learn thses things when you are pushing the server to its limits (or beyond). If it happens often, you need to do a serious performance audit of teh server and determine whether you need more power and/or memory. And in any case, you are less likely to encounter this sort of problem in the future if you try to limit applications to a single database. This will allow a better utilization of system resources. And also, it's a good idea to shut down applications that you are not going to be using for a while. Every loaded app takes system resources whether or not it is doing anything. So review your list of apps that start on startup and consider unloading apps after completing batch processing. Sorry about the long lecture, but I speak from somewhat painful experience. I hope that this will help you.

Unable to connect using sqlplus using Oracle 11.2.0.1 32bit(x86) client

I have database running on Oracle 11.2.0.3 on Linux 5.5 64bit. Another server where I have installed Oracle Client 11.2.0.1 32-bit (x86). (http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linuxsoft-085393.html).
But I can not do tnsping, I get segementation fault. Additionally, I can not to database using sqlplus <user>@SID. I get prompted for the password, then I am back the unix prompt again without any error.
For debugging, I installed 64bit version of the client, which can connect to database. I am using same version/copy of tnsnames.ora. No special character (^M) in the tnsnames.ora.
Any suggestions how do I get this fixed?
Thanks,
KP

I figure I should update my findings on the resolution.
during Oracle 11.2.0.1 client installation, there was an error/warning message about oracle net configuration assistant unable to run. So, I had ignore it thinking its benign and created the tnsnames.ora file manually. On a hunch after 9 days of debugging, i decided to look into this warning message, and found some info in the ora32Inventory/logs/installAction-<date>.log. It had following error about java when running oracle net config.
INFO: # Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c35e]
So, I google the error, and after some research and reading, found an oracle patch to address this error:
ORA-24550: SQL*Plus 32-Bit Client May Crash On Linux X86-64 OS With AMD Processor [ID 1120724.1]
Patch info: 8670579 - DBBETA :NETCA/DBCA FAILED WITH HOTSPOT VIRTUAL MACHINE
Typically, this patch (8670579) is installed on Oracle RAC. however I tried on my app server (oracle client). It resolved my sqlplus issue and more importantly it resolve my application (Business Objects/BSAE) installation issue where it was unable to connect to oracle database using 11.2.0.1 client.
Cheers,
KP

SLD: Duplicate Technical System after Installation Number change

We changed the installation number for a system. After this, inside SLD there are 2 entries for this system, with 2 different installation number (new and old). What is the correct procedure to remove one of the entry (old one).
Please advise.
A proper SAP note would be appreciated.
Thanks

Its ok even if you have forgotten to register to the SLD during installation.We can regaister after installation.Since SLD runs on java engine then if you go to http://<ipaddress or hostname of the server>:5<instancenumber>00/sld
If you go into that you can click on administration button and follow the instructions as in the link.
http://help.sap.com/saphelp_nw70/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.html
Difference between technical systems and business systems is that business systems are used in PI/XI.Whereas technical systems are nothing but your ECC , CRM etc.You have to use business systems only when there is a case for connecting to XI/PI.Hope i have answered your quesries if not please let me know.

HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
However... I seem to have fixed the issue after 2 months of trying.
I followed the advice of this page:
http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
Good luck.
Dom

Unable to connect using Enterprise Manager

I have Oracle 9.2 installed on w2000 server and it was working fine when I use isqlplus and sqlplus. However, after I type in the userID:SYS and password to expand the tree of the database when I use Enterprise Manager , it gives me the error ORA-12520. I got the same error when trying to create DSN in ODBC driver configuration.

Solution:
I ran into the same problem. You have to first create a password file. Run
orapwd file=<fname> password=<password> entries=<users>
The file will usually be in the dbs by default. You may have to play with the file name. I had to make it orapwd in dbs to make it recognize correctly.
Next you need to modify your startup parameter for your instance to use the remote_login_passwordfile='shared' or 'exclusive'
Set it to exclusive if you have only one instance or shared if you have multiple instances. I had to use the pfile and start the instance with that. Just rename your spfile and type 'sql>create pfile from spfile' and then edit it. Set your parameter and restart your instance. The do 'sql>create spfile from pfile' to make your spfile again. Now you should be able to connect as sys remotely from sql or OEM!!!
Doc:
Setting REMOTE_LOGIN_ PASSWORDFILE
In addition to creating the password file, you must also set the initialization parameter REMOTE_LOGIN_PASSWORDFILE to the appropriate value. The values recognized are described as follows:
Value Description
NONE
Setting this parameter to NONE causes Oracle to behave as if the password file does not exist. That is, no privileged connections are allowed over non-secure connections. NONE is the default value for this parameter.
EXCLUSIVE
An EXCLUSIVE password file can be used with only one database. Only an EXCLUSIVE file can contain the names of users other than SYS. Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users and have them connect as themselves.
SHARED
A SHARED password file can be used by multiple databases. However, the only user recognized by a SHARED password file is SYS. You cannot add users to a SHARED password file. All users needing SYSDBA or SYSOPER system privileges must connect using the same name, SYS, and password. This option is useful if you have a single DBA administering multiple databases.

Unable to Connect Using New AirPort Express 802.11n

My mom purchased an AirPort Express 802.11n wireless router (AX) and I, as the designated "technology guru", was tasked with setting it up. Unfortunately, I am having problems out of the box.
When I connect it to the wall, it is found by AirPort Utility, but when I try to set it up, it is unable to connect to the wireless network. ("An error occurred joining the selected wireless network." "An error occurred, close the configuration window and try again.") This is annoying because I have an older AX and it was true to the "it just works" Apple mantra. It is also annoying because the error message has a comma splice.
Feeling pretty proud of my "technology guru" title, I come here to see what I could be doing wrong. I try connecting the computer directly to the router via ethernet cable. With this, I am able to setup my wireless network. I am still not able to connect to it. Additionally, once the AX has been configured, the AirPort Utility can't find it.
I tried updating firmware to 7.5.2. I've tried downgrading to 7.3.2. I've tried hard resets, soft resets. Every tip I could find I have tried. Please help. My self-confidence is wearing out.
Is it time for a call to Apple or a visit to the Apple Store?

Are you trying to configure the Express to "join" the wireless network?
If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
The Express will connect. It's just a matter of finding the right settings.
Message was edited by: Bob Timmons

Exchange 2007 - unable to connect to smtp after severall hours

Hi,
We have a Windows SBS 2008 server with Exchange 2007 SP3. After severall hours we are unable to connect to the server with telnet on port 25 from outside. Sometimes a local telnet on the server still works but not always.
The only solution is to restart the server. The transport service can not be stopped.
Even after a fresh reboot the telnet session does not alway show the smtp banner.

Hi Joost,
Is there any related error message left on Exchange server?
I have found a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/5e2b3320-7c97-4b33-bd8e-e27768f51ec0/hub-transport-service-wont-start-and-keep-running-sbs-2008-exchange-2007
More detailed error message without sensitive informaiton is helpful for the further troubleshooting.
Also, SBS 2008 is different from Exchange 2007 on Windows Server, I suggest ask SBS Forum to double confirm this issue.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

IChat is unable to connect using a .Mac account

Hello,
I have tried to connect using iChat and a .Mac account (no, I do not have an AIM membership and am only a .Mac member).
When I tried to add a friend to the buddy list (there are only Bonjour and AIM lists available, but I'm a member of neither), the AIM list simply says "connecting..." but the connection never completes. I've sometimes waited for hours for the connection.
At this moment, the settings in the iChat program are:
server: slogin.oscar.aol.com
port: 5190
Use SSL is checked.
I also tried login.oscar.aol.com, port 5190, and left the SSL option unchecked. Neither method works at all. Is there a reason it won't connect to the server? Also, why does it use an AOL server? Do they host .Mac accounts?
Ryan

Same problem here... I haven't been able to get iChat to work in days. I have tried changing to port 443 and my password is perfectly acceptable etc but it hangs on "connecting" and then just disconnects or gives me the message "connection could not be completed because it timed out"
nothing on my end has been changed in years but Apple was working on system maintenance a few days ago and that is when I lost iChat. The .Mac system status message area says"Due to scheduled maintenance, 100% of members could not access .Mac services. Normal service has been restored." but that is obviously bunk. I am not the only one... a friend of mine locally has the same issue. I think someone at apple has screwed something up!

Unable to connect using system after installation...

Similar Messages

Maybe you are looking for