Unable to create Business Service "Web Engine Interface" (sbl-dat-00227)

Does anybody know about this issue? I can't test my workflows because of the same message please it is urgent fix it.
Regards.

Hi,
Does the Application is working only on ENU or any other language. Pls confirm.
If you are trying to test the worklfow other than ENU, this error will occur.
There are some LOV Value for "ACCESS_RESOURCE_TYPE". Please check if it exists and the Language is ENU.
Regards,
Joseph Arul Dass

Similar Messages

  • (model.cpp (4051)) SBL-DAT-00227: Unable to create the Business Service 'EAI Outbound Service'

    Hello,
    I'm self-study integrating Siebel with SOA
    I just set up windown 2003 Siebel 8.1.1.11 (32-bit)
    I start Siebel Server error log file:
    >>>>> InfraEAIOutbound_0021_22020098.log <<<<<
    2021 2014-04-15 11:27:34 0000-00-00 00:00:00 +0700 00000000 001 003f 0001 09 InfraEAIOutbound 22020098 724 4056 C:\Siebel\8.1.1.11.0\ses\siebsrvr\log\InfraEAIOutbound_0021_22020098.log 8.1.1.11 [23030] ENU
    ServerLog    LstnObjInherit    3    000064e0534c0428:0    2014-04-15 110    2014-04-15 11:27:34    Inherited listening object for port 49157
    ServerLog    LstnObjPrivCreate    3    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:27:34    Created port 49170 for EAI Outbound Server
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:27:53    [AUDIT_LOG]: Global audit cache load successful.
    ObjMgrLog    Error    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (model.cpp (4051)) SBL-DAT-00227: Unable to create the Business Service 'EAI Outbound Service'
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Object manager error: ([0] Unable to create the Business Service 'EAI Outbound Service'(SBL-DAT-00227) (0x7500e3))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Object manager error: ([1] Could not find 'Class' named 'EAI Outbound Service'. This object is inactive or nonexistent.(SBL-DAT-00144) (0x750090))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    ( (0) err=2818155 sys=7667856) SBL-OMS-00107: Object manager error: ([1] Could not find 'Class' named 'EAI Outbound Service'. This object is inactive or nonexistent.(SBL-DAT-00144) (0x750090))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    ( (0) err=2818155 sys=7667939) SBL-OMS-00107: Object manager error: ([0] Unable to create the Business Service 'EAI Outbound Service'(SBL-DAT-00227) (0x7500e3))
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (bsvcmgr.cpp (941) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (bsvcmgr.cpp (1044) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    GenericLog    GenericError    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    (smimtsrv.cpp (1203) err=2818250 sys=0) SBL-OMS-00202: Error 7667939 loading Business Service "EAI Outbound Service"
    SmiLayerLog    Error    1    000064e2534c0428:0    2014-04-15 110    2014-04-15 11:28:11    Terminate process due to unrecoverable error: 2818250. (Main Thread)
    LOG FILE:
    >>>> SIEBELEVAL.Eval_1.log <<<<<
    2021 2014-04-15 11:27:05 0000-00-00 00:00:00 +0700 00000000 001 003f 0001 09 SiebSrvr 0 2404 2876 C:\Siebel\8.1.1.11.0\ses\siebsrvr\log\SIEBELEVAL.Eval_1.log 8.1.1.11 [23030] ENU
    ServerLog    ServerStartup    1    00006142534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Siebel Enterprise Applications Server is starting up
    ServerLog    LstnObjCreate    1    00006231534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49156 for Business Integration Batch Manager
    ServerLog    LstnObjCreate    1    00006231534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49157 for EAI Outbound Server
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49158 for JMS Receiver
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49159 for Business Integration Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49160 for File System Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49161 for Server Request Processor
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49162 for Siebel Administrator Notification Component
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49163 for Server Request Broker
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49164 for Server Manager
    ServerLog    LstnObjCreate    1    00006232534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 2321 for Siebel Connection Broker
    ServerLog    LstnObjCreate    1    00006233534c0428:0    2014-04-15 110    2014-04-15 11:27:05    Created port 49165 for Forecast Service Manager
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SRBroker    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    ServerMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    ServerMgr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SiebSrvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SiebSrvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SCBroker    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SrvrSched    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SrvrSched    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    Created multithreaded server process (OS pid =     2800    ) for SRBroker
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    Created server process (OS pid =     2408    ) for SCBroker
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:05    SCBroker    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SRBroker    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    FSMSrvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SRProc    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SvrTblCleanup    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    SvrTaskPersist    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    AdminNotify    STARTING    Component is starting up.
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3404    ) for FSMSrvr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3796    ) for SRProc
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created server process (OS pid =     3852    ) for SvrTblCleanup
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created server process (OS pid =     3104    ) for SvrTaskPersist
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    Created multithreaded server process (OS pid =     3876    ) for AdminNotify
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:10    FSMSrvr    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:15    SRProc    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SvrTblCleanup    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SvrTaskPersist    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    AdminNotify    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeSalesObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeBrokerageObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSConsoleObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    INSeServiceObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeChannelObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeBankingObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeEnrollmentObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SSEObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FINSeCustomerObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesAMIRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesAMIRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    BusIntBatchMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMCObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MSMQRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MSMQRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    InfraEAIOutbound    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesSrvRcvr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    MqSeriesSrvRcvr    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    JMSReceiver    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    BusIntMgr    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EIM    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EIM    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    EAIObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    CustomAppObjMgr_enu    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMQReceiver    STARTING    Component is starting up.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    SMQReceiver    INITIALIZED    Component has initialized (no spawned procs).
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    FcstSvcMgr    STARTING    Component is starting up.
    ServerLog    ServerStarted    1    00006499534c0428:0    2014-04-15 110    2014-04-15 11:27:16    Siebel Application Server is ready and awaiting requests
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    Created server process (OS pid =     2488    ) for FINSObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:16    Created server process (OS pid =     2540    ) for FINSeSalesObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3568    ) for FINSeBrokerageObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2640    ) for FINSConsoleObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     4092    ) for INSeServiceObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2812    ) for FINSeChannelObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     316    ) for FINSeBankingObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3068    ) for FINSeEnrollmentObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2572    ) for SSEObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     2940    ) for FINSeCustomerObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created multithreaded server process (OS pid =     1804    ) for BusIntBatchMgr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:17    Created server process (OS pid =     3288    ) for SMCObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     724    ) for InfraEAIOutbound
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     2296    ) for JMSReceiver
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     2976    ) for BusIntMgr
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created server process (OS pid =     3168    ) for EAIObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created server process (OS pid =     2448    ) for CustomAppObjMgr_enu
    ServerLog    ProcessCreate    1    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:18    Created multithreaded server process (OS pid =     3080    ) for FcstSvcMgr
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSeBrokerageObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:28    FINSConsoleObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    FINSeSalesObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    SSEObjMgr_enu    INITIALIZED    Component has initialized.
    ServerLog    ComponentUpdate    2    00001cbf534c0964:0    2014-04-15 110    2014-04-15 11:27:33    SMCObjMgr_enu    INITIALIZED 

    Hi Experts,
    How to configure and launch the Siebel EAI?
    I'm having problems with url: http://ws811/eai_enu/start.swe?SWECmd=Start&SWEHo=ws811
    HTTP 500 - Internal server error
    Internet Explorer
    And the other url is OK:
    http://ws811/sales_ENU/start.swe?SWECmd=Start&SWEHo=ws811
    Please provide solution the asap.

  • Oracle Day Exercise--Creating Business Services

    Hello,I am a beginner of Jdeveloper ,I met some problems in practise the 'Creating Business Services ',below is the logging message, Is there any experts and would please give me some instruction on it ?
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config>
    D:\oracle\jdev1012\jdk\bin\javaw.exe -ojvm -classpath D:\oracle\jdev1012\j2ee\home\oc4j.jar;D:\oracle\jdev1012\jdev\lib\jdev-oc4j.jar -Dhttp.proxyHost=rkfdproxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=192.168.*|172.22.1.*|10.*|190.*|*.sspi.com|*.aesysllc.com|*.woodward.com|localhost|127.0.0.1 -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\server.xml
    [waiting for the server to complete its initialization...]
    05/03/25 09:59:55 Copying default deployment descriptor from archive at D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes/META-INF/orion-ejb-jar.xml to deployment directory D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\application-deployments\current-workspace-app\classes...
    05/03/25 09:59:55 Auto-deploying - file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/ (No previous deployment found)...
    05/03/25 09:59:55 Auto-deploying - compiling and loading...
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:567: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
    requestApproval___101_wrapperPE = (PhaseEventIntf) ApplicationServer.phaseEventFactory().create(requestApproval___101_noun, "wrapper", "wrapper");
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:569: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
    requestApproval___101_wrapperPE.deriveMetric(SensorIntf.all);
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:364: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
    requestApproval___101_wrapperPE.stop(wtoken);
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:210: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
    wtoken = requestApproval___101_wrapperPE.start();
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:263: error #300: class SatelessSessionEJBHome not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
    context = ((SatelessSessionEJBHome)home).getLocalContextInstance();
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacade_StatelessSessionBeanWrapper2.java:246: error #300: class bolean not found in class EmployeeReqFacade_StatelessSessionBeanWrapper2
    bolean created = false;
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacade_StatelessSessionBeanWrapper2.java:528: error #300: variable contextCntainer not found in class com.evermind.server.ThreadState
    thread.contextCntainer = previousContainer;
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeHome_StatelessSessionHomeWrapper3.java:228: error #300: class PhaseEventItf not found in class EmployeeReqFacadeHome_StatelessSessionHomeWrapper3
    create___0_wrapperPE = (PhaseEventItf) ApplicationServer.phaseEventFactory().create(create___0_noun, "wrapper", "wrapper");
    ^
    D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocalHome_StatelessSessionHomeWrapper1.java:227: error #300: variable ApplicationSerer not found in class EmployeeReqFacadeLocalHome_StatelessSessionHomeWrapper1
    ApplicationSerer.stateFactory().create(create___0_noun, "trans-attribute", "", "trans attribute", "unspecified");
    ^
    9 errors
    Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
    Error in application current-workspace-app: Error loading package at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/,
    Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
    05/03/25 09:59:59 done.
    05/03/25 09:59:59 Error instantiating application 'current-workspace-app' at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/EmployeeRequisitionApplication-oc4j-app.xml: Error initializing ejb-module; Exception Error in application current-workspace-app: Error loading package at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/,
    Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 7382 ms.
    05/03/25 10:00:00 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0) initialized

    Most likely the issue is that the deployment profile is not assembling all the required components, in this case EJB which was exposed as the Web Service.
    I also notice that you are deploying to 10.1.2 OC4J, these labs are designed to work with OC4J 10.1.3 Developer preview3 (DP3) not OC4J 10.1.2
    Make sure you are deploying to OC4J 10.1.3 DP3, and also double check your deployment profile to make sure all the required components are assembled.
    raghu
    JDev Team

  • Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

    Hello Community
    my ULS-logs are flooded with entries like
    w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
    Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
    Best Regards
    Michael

    Hi Linda
    thanks a lot for help.
    I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
    of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
    Right before the strange entry in the logs we are getting these:
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
    02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
    02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
    02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
    that's it, unfortunately. These entries are repeating every 15 seconds.
    Best Regards
    Michael

  • Create Business Service for Dotnet Webservice?

    Hi all,
    I have one dotnet Webservice which is implemented from remote server.
    I begin create Business service for this service in OSB, but I don't know what I must choice between five Services Type:
    - WSDL Web Service
    - Transport Typed Service
    - Messaging Service
    - Any SOAP Service
    - Any XML Service
    My dotnet Webservice return one String in XML format like that <string>Hello World</string>Anybody can help me ?. If can,please give me full example show how to binding dotnet Webservice to OSB to Weblogic portal
    Thank a lot!

    Hi Patrick,
    I think my dotnet Webservice have WSDL
    when I access this address
    http://localhost/DotnetWebService/Service1.asmx?Wsdland I receive the result:
    <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
      <wsdl:types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
          <s:element name="HelloWorld">
            <s:complexType />
          </s:element>
          <s:element name="HelloWorldResponse">
            <s:complexType>
              <s:sequence>
                <s:element minOccurs="0" maxOccurs="1" name="HelloWorldResult" type="s:string" />
              </s:sequence>
            </s:complexType>
          </s:element>
        </s:schema>
      </wsdl:types>
      <wsdl:message name="HelloWorldSoapIn">
        <wsdl:part name="parameters" element="tns:HelloWorld" />
      </wsdl:message>
      <wsdl:message name="HelloWorldSoapOut">
        <wsdl:part name="parameters" element="tns:HelloWorldResponse" />
      </wsdl:message>
      <wsdl:portType name="Service1Soap">
        <wsdl:operation name="HelloWorld">
          <wsdl:input message="tns:HelloWorldSoapIn" />
          <wsdl:output message="tns:HelloWorldSoapOut" />
        </wsdl:operation>
      </wsdl:portType>
      <wsdl:binding name="Service1Soap" type="tns:Service1Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
        <wsdl:operation name="HelloWorld">
          <soap:operation soapAction="http://tempuri.org/HelloWorld" style="document" />
          <wsdl:input>
            <soap:body use="literal" />
          </wsdl:input>
          <wsdl:output>
            <soap:body use="literal" />
          </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
      <wsdl:binding name="Service1Soap12" type="tns:Service1Soap">
        <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
        <wsdl:operation name="HelloWorld">
          <soap12:operation soapAction="http://tempuri.org/HelloWorld" style="document" />
          <wsdl:input>
            <soap12:body use="literal" />
          </wsdl:input>
          <wsdl:output>
            <soap12:body use="literal" />
          </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
      <wsdl:service name="Service1">
        <wsdl:port name="Service1Soap" binding="tns:Service1Soap">
          <soap:address location="http://localhost/DotnetWebService/Service1.asmx" />
        </wsdl:port>
        <wsdl:port name="Service1Soap12" binding="tns:Service1Soap12">
          <soap12:address location="http://localhost/DotnetWebService/Service1.asmx" />
        </wsdl:port>
      </wsdl:service>
    </wsdl:definitions>
      Do you have any suggestion for me ?
    Thanks
    Edited by: AS84 on May 11, 2011 12:10 AM

  • Unable to create a Service Connection Point

    Hi -
    I set up a new SharePoint 2013 environment.  Everything installed successfully.  When I launch Central Admin, it doesn't accept my logon ID/password.  I found the following in the application event logs.    I assume our AD guys will
    need to set up a new SCP as pointed out here:   http://technet.microsoft.com/en-us/library/ff730261.aspx
    I just don't recall having to ever do this before in any of the dozen or environments that I had set up.   
    Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
     Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=cprt,DC=adt,DC=net doesn't exist in the directory.
       at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
       at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.ProvisionAdminVs()
    By the way, when I tried to run PowerShell to create the Admin Content DB, I got this error, even though the install account has sysadmin privileges on all databases: 
    New-SPConfigurationDatabase : Cannot connect to database master at SQL server
    at SP2013Server -AdministrationContentDatabaseName. The database might not
    exist, or the current user does not have permission to connect to it.
    At line:1 char:1
    + New-SPConfigurationDatabase -DatabaseName SharePoint_Config -DatabaseServer
    VMRS ...
    I just went ahead and then ran the Product Config Wizard and it set up everything fine.  Some folks were able to resolve by running config wizard twice? 
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/6ae61eb1-9405-4421-9bc7-a0037f4ec29b/sp1-upgrade-failure-service-connection-point?forum=sharepointadminprevious

    Hi,
    According to your post, my understanding is that you were unable to create a Service Connection Point.
    To resolve the “Unable to create a Service Connection Point in the current Active Directory domain”
    error, you need to make sure you have permission to write to this container.
    “You have to grant permission to write to this container to any user accounts or domain accounts that could run the SharePoint Products
    Configuration Wizard. If the account does not have permission to write to this container, the following warning will appear in the log file for the SharePoint Products Configuration Wizard:  Unable to create a Service Connection Point in the current Active
    Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.”
    http://technet.microsoft.com/en-us/library/ff730261.aspx
    The “New-SPConfigurationDatabase : Cannot connect to database master at SQL server”
    error is a common issue and has various resolutions.
    More often than not it is a firewall issue on the SQL server so check that OR it's that SQL server has not been enabled for remote connections.
    I would recommend you follow all the steps and options in
    Cannot connect to database master at SQL server
     and
    SharePoint Install – Cannot connect to database master.
    More information:
    Configuring Service Connection Points for SharePoint 2013:
    http://onpointwithsharepoint.blogspot.in/2013/06/configuring-service-connection-points.html
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Unable to create Business Place

    Hi Experts,
    I am unable to create Business Place in my Ides Server. when i follow the path Fin Acctg-Fin Acctg Global SettingWTax-Extended W Tax-Basic Settings-India-Define Business Place.
    Here i get the selection screen as Company Code  Section Code  Name 1 which should had been Company Code Business Place TAN Number.
    Please provide inputs how do i get this done.
    Regards,
    Rahul

    Dear,
    If you want to create Business Place then maintain view J_1BBRANCV using transaction SM30.
    To create section code maintaining view J_1I_SECCODE using transaction SM30...
    Note
    Now Business Place is no longer used in Withholding Tax which has been replaced by Section Code.
    Regards,
    Chintan Joshi

  • Business service failed to insert the data in DB2

    Hi I have developed a business service through OSB and deployed in to SOB in my local. The business service is trying to insert data in to DB2 table where the primary key column is auto generated in DB2.
    When i am testing the business service, in the XML i have removed that tag out of it and tried the execute the service and I end up with the following error. Please let me know where I am going wrong in this.
    <Mar 15, 2012 1:35:19 PM CDT> <Error> <JCA_FRAMEWORK_AND_ADAPTER> <BEA-000000> <servicebus:/WSDL/IIRSearch/adapter/IIRA
    apterServices/AuditInputDataService [ AuditInputDataService_ptt::insert(SearchAuditIirCollection) ] - Could not invoke
    peration 'insert' due to:
    BINDING.JCA-11616
    DBWriteInteractionSpec Execute Failed Exception.
    insert failed. Descriptor name: [AuditInputDataService.SearchAuditIir].
    Caused by java.sql.BatchUpdateException: [IBM][CLI Driver][DB2/LINUXX8664] SQL0798N A value cannot be specified for co
    umn "SEARCH_ID" which is defined as GENERATED ALWAYS. SQLSTATE=428C9
    Please see the logs for the full DBAdapter logging output prior to this exception. ConnectionFactory property platform
    lassName was set to org.eclipse.persistence.platform.database.oracle.Oracle10Platform but the database you are connecti
    g to is DB2/LINUXX8664. Please validate your platformClassName setting. This mismatch can cause the adapter to trigge
    runtime exceptions or execute SQL that is invalid for the database you are connected to. This exception is considered
    not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCo
    es with value "--798" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these
    omposite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties ar
    integers.
    at oracle.tip.adapter.db.exceptions.DBResourceException.createNonRetriableException(DBResourceException.java:68
    at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:648)
    at oracle.tip.adapter.db.exceptions.DBResourceException.outboundWriteException(DBResourceException.java:696)
    at oracle.tip.adapter.db.transaction.DBTransaction.commit(DBTransaction.java:236)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:544)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:353)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.j
    va:312)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:29
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:345)
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.post(JCABindingReferenceImpl.java:195)
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invokeOneWay(JCATransp
    rtOutboundOperationBindingServiceImpl.java:109)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendOneWay(JCATransportEndpoint.java:191)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:168)
    at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:598)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
    at $Proxy128.sendMessageAsync(Unknown Source)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.
    ava:603)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:
    38)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:380)
    at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:79)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:137)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:135)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:140)
    at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
    at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
    at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(Unknown Source)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

    I am assuming that the primary key that you were referring to is the SEARCH_ID.
    Caused by java.sql.BatchUpdateException: [IBM][CLI Driver][DB2/LINUXX8664] SQL0798N A value cannot be specified for column "SEARCH_ID" which is defined as GENERATED ALWAYS. SQLSTATE=428C9Looks like when you generated the JCA DBAdapter WSDL, all the columns were selected. And hence the insert queries that were generated to be used by the JCA DBAdapter have this field.
    Can you reconfigure the DBAdapter with a custom query to insert in to the table, without the primary key column selected. This should resolve your issue.
    If this still does not solve your issue. Lets start to debug further by capturing the exact SQL query being executed.
    Enable the debug mode for the JCA framework. Edit the alsbdebug.xml file in the domain directory and set the category alsb-jca-framework-adapter-debug flag to true. Then restart the servers.
    Refer - http://download.oracle.com/docs/html/E15867_01/app_debugging.htm for more details.
    Hope this helps.
    Thanks,
    Patrick

  • Integration directory problem while creating business service

    HI,
    CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
    IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
    BEST REGARDS,
    MONA

    Hi Mona,
    Let me explain you in detail:-
    First, Activate the Change List in the Integration Repository once the design objects are complete.  By activating the change list, the object becomes available for Configuration in the Integration Directory.
    Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
    You also have the option of 'Configuration Wizard'.
    This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
    It is not mandatory to use any of these tools to configure your scenario.
    All you have to do for configuring your scenario is
    1. Create Business system/Business service
    2. Create Communication Channel
    3. Create Receiver Determination
    4. Create Interface Determination
    5. Sender Agreement
    6. Receiver Agreement
    I hope this provides you a solution.
    Regards.
    Praveen

  • Error creating business service with EJB transport on Unix

    I have ALSB 3.0 installed on a Unix system and I am unable to create a business service based on the EJB transport. After I associate the client jar to the business service, ALSB recognizes the home and remote interfaces in the jar file but as soon as I click the Next button I see the following error:
    An expected exception occurred during the creation or update of this service: null
    If I install ALSB 3.0 on Windows then I am able to create the identical EJB based business service that fails on Unix.
    Has anyone been able to create an EJB based business service on Unix or is this a known issue with ALSB 3.0?
    Thanks for any help!

    Hi irgendwo,
    user profile server must be required when you need the to enable the People Search feature. and this pre-request.
    you can confg search  but you can used because there are many service which are depeded to each other
    check the link for depended services
    http://technet.microsoft.com/en-us/library/ee662538%28v=office.15%29.aspx
    Please verify all the depended service as well which is required in serach service...
    see the below link from MSDN about serch service application ..
    http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
    http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
    Please mark the Answe and vote me if it will you while search configuration

  • Regarding Newly created Business Service ?

    Hi @,
    In my scenarion I have created one New Business Service which is web service and it will be used in sync manner.while creating the Business Service there are two tabs Sender and Receiver which conatins the interface names .My doubt is as the web service is going to be used in Sync Manner whether the interface defined for the both will be same or I have to define different Interfaces?
    I tried SDn but wasn't sucessful in finding a reasonable answer.
    Regards

    Hi,
    If your webservice will be fire/start the communication, I mean, it will send the request to some resource it will be the Sender, and you have to assign to it Outbound Synchronous interface.
    If your webservice will be a provider of information then you have to assign to it Inbound Synchronous interface.
    Regards,
    Jakub

  • Business Service pulling wrong interface in Config Overview

    Hello,
    I have created a Business Service with 2 receiver (inbound) interfaces.  But when I assign this business system as the configured receiver in Receiver Determination, PI 7.1 is populating the receiving interface from the the Sender's BS.
    Example:
    Business System - Sys1
    Receiver Interface for Sys1 > Doc_Out
    Business System - Sys2
    Receiver Interface for Sys2 > Doc_In
    Create Receiver Determination:
    Sender > Sys1
    Interface > Doc Out
    Assign BS Sys2 as configured receiver
    Open "Configuration Overview" and view the reciever interface.
    Rather than showing Sys1 > Doc_In PI is showing Sys1 > Doc_Out.
    Why would PI ignore the interfaces within Sys2 and use the Sender's interfaces?
    Thanks,
    Matt

    I have now tried setting up Sys2 as a business system, business service and as a party/business service.  And every time I create my Receiver Determination and assign Sys2 as the Receiver it points to Doc_Out from Sys1 (sender) as the receivers interface. 
    I would like to know how to determine if a system is a business system or a business service?  Also, when should it be considered a party (rather than service without party)? 
    Sys2 is an external system that we exchange files with via FTP.
    In IR I have Sys2 using its own SWC and namespace and I have Sys1 using the SAP SRM SERVER 5.0 SWC and sap.com/supplierenablement/global namespace.  Could there be something wrong with my design in IR?
    I have also tried moving the Sys1 namespace underneath the SAP SRM SERVER 5.0 SWC...but it didn't make a difference.
    Any help will be appreciated!
    Thanks,
    Matt

  • Basic question about creating Business Service

    When we create a new Business Service there is an option to create a Business Service from an existing BusinessService, or an existing ProxyService. What is the meaning of such definitions? Can you give an example where these two use cases are needed/useful?

    One of the primary reasons for using an enterprise service bus is to de-couple the backend service (business service) from the service consumers (or clients) using a proxy service. One of the simplest scenarios is to expose the backend service with an identical interface but with perhaps a different service (endpoint) address or using a different protocol. The create from existing business service/proxy service options create a proxy service with the same interface and a message flow already configured to route to the service you selected. You can read through a simple example of this on my blog here:
    http://dev2dev.bea.com/blog/ctomkins/archive/2007/12/exposing_a_new_service_via_aqu.html
    Hope that makes sense.

  • Unable to create Search Service Application

    Hi All,
    When I tried to create Search Service Application in Central Admin, I'm getting Error on creation. The below is the detail error.
    Errors were encountered during the configuration of the Search Service Application.
    Microsoft.SharePoint.SPException: The timer job completed, but failed on one or more machines in the farm. at Microsoft.SharePoint.Administration.SPTimerJobAsyncResult.End()
    at Microsoft.SharePoint.Administration.SPServiceApplication.ProvisionInstances() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.Provision() at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Provision() at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.b__22()
    at Microsoft.Office.Server.Search.Administration.SearchAdminUtils.UpdateIgnoreSPUpdatedConcurrencyException(String description, SearchAdminUtilsUpdateDelegate updateDelegate, SearchAdminUtilsRefreshObjectDelegate refreshObjectDelegate) at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.CreateSearchApp()
    at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
    5/2/2011 11:49:08 AM
    Could any body guide, where I'm missing?.
    Thanks
    When I looked in EventViewer for more error details, the below is the error message.
    Access to 'Global\Microsoft.SharePoint.SPIisProvisioningLock' is denied
    any ideas?.

    It doesnt work.
    I Stopped the search service and then try to receate the Search sercie application with the gui. In the log I get the same error.
    SearchConfigWizardFinish page failed with exception. System.InvalidCastException: Unable to cast COM object of type 'Microsoft.Office.Server.Search.Administration.MSSITLB.CGatheringManagerClass' to interface type 'Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherManagerAdmin3'.
    This operation failed because the QueryInterface call on the COM component for the interface with IID '{0FF1CE14-013A-0000-0000-000000000000}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)).   
    Server stack trace:      at Microsoft.Office.Server.Search.Administration.Gatherer.get_AdminObject()     at Microsoft.Office.Server.Search.Administration.Gatherer.ProvisionGlobalProperties()    
    at Microsoft.Office.Server.Search.Administration.Gatherer.Provision()     at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Provision()     at Microsoft.Office.Server.Search.Administration.SearchAdminUtils.DeployLocalServiceInstance[T](T
    localSearchServiceInstance)     at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.Create(AbstractSearchConfigWizard wizardOM)     at Microsoft.Office.Server.Search.Internal.UI.SearchConfigWizardFinish.ExecuteConfigurationTimerJob(SPLongOperationState
    longOperationState, String& strRedirectPage)     at Microsoft.SharePoint.SPStatefulLongOperation.SetThreadCultureAndRun(RunStatefulOperation runOperation, SPLongOperationState state, CultureInfo culture, CultureInfo uICulture)    
    at Microsoft.SharePoint.SPStatefulLongOperation.<>c__DisplayClass6.<Run>b__0(Object state)     at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object state)     at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
    md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)     at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)    Exception
    rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)     at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData&
    msgData)     at System.Threading.WaitCallback.EndInvoke(IAsyncResult result)     at Microsoft.SharePoint.Utilities.SPThreadPool.RunAsyncWorkItem(ImpersonatedCallbackParam param, TimerCallback timerCallback, Object timerState,
    Int32 timerPeriod)     at Microsoft.SharePoint.Utilities.SPThreadPool.RunAsyncWorkItemWithImpersonation(WaitCallback workItemCallback, Object workItemState, TimerCallback timerCallback, Object timerState, Int32 timerPeriod)    
    at Microsoft.SharePoint.SPStatefulLongOperation.Run(RunStatefulOperation runOperation)     at Microsoft.Office.Server.Search.Internal.UI.SearchConfigWizardFinish.<>c__DisplayClass2.<Commit>b__0(SPStatefulLongOperation longOperation)

  • How to create Business Services in SLD

    Hi Experts,
    I'm working on SAP background and wanted to learn SAP-XI.
    I'm interesting to work in XI and for this need your support.
    I installed XI in my PC and wanted to start learning.
    But there are no Business Services (or) Systems configured in the SLD.
    I want to start with a simple FILE to FILE scenario.
    Could anyone please tell me how to create services in SLD and carry on from there.
    Thanks,
    Prajwal

    Hi,
    please look at the bleow links
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4013f6bb-7ec3-2b10-62b5-e5be01e498f7
    Blogs
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i  - Step by Step Guide: XML File 2 XML File Scenario: Part I
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii - Step by Step Guide: XML File 2 XML File Scenario: Part 2
    Regards,
    Pradeep A.
    Edited by: Pradeep Amisagadda on Apr 16, 2010 9:39 AM

Maybe you are looking for

  • Adobe Reader 9.3.2 local print error

    Hi, I have a lot of problems with Adobe Reader 9.3.2 and printig to local printers. I can print to my network printer just fine. When I try to print from pdf to my local printer I get this error (can't upload .jpg file:( Bellow is the error: "The ins

  • Acc_system_not_found

    Hi! I'm trying to update the accounting view in MM01 transaction. After enter the plant, a runtime error appears because the accounting system couldn't be determinated. I found by debug the following problem: In the Method: IF_ACC_ACCSYS~GET_DATABASI

  • Notifying techs of users with issues

    How does a tech get to know who to sort out when a ticket is assigned to him/her?I have tried to modify the ticket notification template but the tech still doesnt know who he is to sort out.Sometimes the techs are on the field and dont need to login

  • How to Summarized Running Total and Formula ????

    Post Author: ryan_r CA Forum: Crystal Reports Hi my name is Ryan, I want to ask something. I have build a report that contains Running totals and Formula. What I want to do is I want to use subtotal and Summary field for the running total and Formula

  • Keeping unlimited data buying used phone confusion

    Hello, looking for a little help and clarity here if possible. I have an unlimited data plan from years ago and would like to keep it. I have been using one of the first motorola droid phones and it is just way out of date with the 3G. I understand t