Unable to create integrator using webadi
Hello,
We are trying to create a custom integrator from our custom schema - XXXXX.It errors saying PER PER_289870_ADI_IFACE_FAIL : An error occurred and the interface was not created. Please check input values and try again.The same Integrator works when we run this in apps schema.Since we are on on demand we are not allowed to push any code into apps.Please advice.
Regards,
J
Hi,
Check the value of "BNE: Server Log Path" profile option, if it is set you can find the log file under this directory. Otherwise, check under $FND_TOP/log directory.
Regards,
Hussein
Similar Messages
-
I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003
In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works. -
Unable to create delivery using ADSUBCON
Hi Gurus,
I am unable to create delivery using ADSUBCON transaction for the PO which has material with different Order Unit. My base unit of measure is EA where as the Order unit is Roll. If I delete the order unit system allows me to create delivery where the PO.
Why the system does not allow me to create the delivery when the order unit is different than base unit of measure.
Thanks in advance,
Shashidhar
Edited by: Shashidhar on Jan 29, 2011 5:19 AMHI,
Its already been maintained.
Shashi -
Unable to create JVM using JNI
Hai,
I am new to java programming. I am trying to invoke native application using JVM. I have a written a pilot code in C using JNI. I am getting the following error when I try to run the binary. I think that the problem is from the fact that 1.2.2 is installed in
/usr/bin directory (and is the default on the server). But I have set both
LD_LIBRARY_PATH, PATH and path
so that it points out 1.4.2. Here is the error
unable to create JVM
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
while building the binary I am using JDK1.4.1 header and lib files
These are my compilation arguments
g++ -g -I/opt/BES/jdk/jdk1.4.1/include/ -I/opt/BES/jdk/jdk1.4.1/include/solaris/ -L/opt/BES/jdk/jdk1.4.1/jre/lib/sparc/ -ljvm -ljava jniTest.C
Help Needed
Thanks
SunilI haven't seen this before. Could it be a disk space issue?
Are you using JDevStudio or JDevStudioBase? And do you have your JAVA_HOME set? If you are using JDevStudio, try running JDev in a command window where JAVA_HOME is not set - I'm pretty sure JDev does NOT get confused about this but I haven't done extensive testing.
Also you should try deleting and unzipping JDev again.
Finally, search the JDev TP forum - there are some discussions there about this error and you may find an answer to your specific configuration - it doesn't seem to be a TP4 specific issue.
JDeveloper and OC4J 11g Technology Preview
Heidi. -
Unable to create DC using software component
Hi,
I have created Software component, and later downloaded track into my NWDS but while I am trying to create DC using above Software Component which is in gray out.
The software component does not support the selected development component type. At least one required DC is not visible.
I am working on CE7.2, NWDS v7.2 SP04 PAT0008
Please let me know how to fix the issue. Appreciate your quick response.
Thanks in advance.
cheers
devHi Dev,
Please check required dependancy for the software component which you have created for CE7.2 track and make entries in the Name reservation for custom development. Once you modify then stop/start SLD server. then in the landscape configurator, do the update CMS.
Please check all the required parameters in CMS are updated properly and you have checkin and imported component in checkin and development tab repestively in transport studio.
Best Regards,
Arun Jaiswal
Edited by: Ervin Szolke on May 17, 2011 3:23 PM -
Unable to create WebService using Wizard
XML experts,
I am following the 'How to...Send XML Data to BW' guide. In Step 26, for BW 3.5, I start to create WebService using SE37 and use the Wizard. I go thru all the steps as follows:
Virtual Inteface: Myservice
Short Description: Myservice
Endpoint Type: Function Module
Check Name Mapping box
Function Module: /BI0/QI6ASENDXMLDATATOBW_RFC
Name: Myservice
Short Description: Myservice
Profile: Basic Authorization: SOAP Pro
If you select Complete, the following objects are created in the Object Navigator:
The virtual interface Mydemo
The Web service Mydemo
The address of the Web service is default_host/sap/bc/srt/rfc/sap/Mydemo
In addition, the Web service definition is released for the SOAP runtime.
To find the address of the Web service, use the transaction WSCONFIG, which supports you when you publish a Web service in the UDDI.
WHEN I PRESS COMPLETE, I get a message 'Object can only be created in SAP Package'. I SELECT OK and get the CREATE OBJECT DIRECTORY ENTRY popup for entering package info for transport.
<b>Question: Is this normal? I tried local object ($tmp) and ZBIW, but it does not take it. Says, test object cannot be created in foreign namespaces. What do I need to do to bypass this?</b>
Thanks a lot!!Hi
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-i 1</a>
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-ii 2</a>
Regards
Abhijith Ys -
Unable to create DSN using SQLConfigDataSource on windows 64bit
Hi all,
I have a 32bit application that needs to be ported and installed on to 64bit Win2k3 server.
During installation of the product, Install script is failing to create a DSN using SQLConfigDataSource API on 64bit windows2k3 server.
I installed 32 bit Oracle client(10.2) on the 64bit m/c, despite this, I am getting an error "ORA-12154: TNS:could not resolve the connect identifier specified, Driver's SQLSetConnectAttr failed"
But when I invoke odbcad32.exe from "C:\windows\syswow64\", I am able to see all 32bit drivers and I am able to create the DSN and Test the connection successfully to a 64bit ORACLE 10g DB installed on the same m/c. I am even able to connect to the same database from the COMMAND PROMPT through the command "sqlplus" with same credentials and SID.
Based on observations from the debug, I feel the Installer is picking up odbcad32.exe from "C:\windows\system32\" folder. Hence what I did was, I copied the 32 bit odbcad32.exe from "c:\windows\syswow64" folder into the above folder. At this juncture, the product Installer was able to create the DSN, but it is still failing to TEST the connection successfully and my Installer quits giving the above error.
Can somebody help me out in this regard, about how I can overcome this problem. Is there something that I am missing ?
Thanks in advance for your help.
Regards,
Murali.Thanks for your prompt reply.
If I access the SQLPLUS from the below 3 locations and connect through the same user credentials(test/test@orcl) and same SID, the connections are successful.
C:\oracle\product\10.2.0\db_1\BIN\sqlplusw.exe(64 bit DB server)
C:\oracle\product\10.2.0\client_1\BIN\sqlplusw.exe(64 bit Client)
C:\oracle\product\10.2.0\client_2\BIN\sqlplusw.exe(32 bit Client)
The TNSNAMES.ORA file in all the below 3 locations have the same content !!
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN (64 bit DB server)
C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN (64 bit Client)
C:\oracle\product\10.2.0\client_2\NETWORK\ADMIN (32 bit Client)
Hence my concern turned over to the error details which point to " Driver's SQLSetConnectAttr failed".
When I debugged my code, I could see the SQLConfigDataSource() is getting called with params (NULL, "ODBC_ADD_SYS_DSN", "Oracle in OraClient10g_home2", "DSN=DSNTemp;UID=test;PWD=test")
The above values suggest, Oracle 32bit driver is used to create the above TEMP DSN. I think my setup's runtime is picking up 64bit ODBC DATA SOURCE ADMINISTRATOR from "C:\windows\odbcad32.exe" by default, which cannot find the specified 32 bit driver !!
Do you think my assumption is valid/true ? If so, how can I make my SETUP's runtime to pick up 32 bit ODBC DSA from "C:\windows\syswow64\odbcad32.exe"?
Can you suggest me what might create the above error(Driver's SQLSetConnectAttr failed). Do you think there is some problem with the Connection string ?
Thanks for you help,
Murali -
Unable to create text using SAVE_TEXT FM
Dear Experts,
I' m trying to automaticly create a text in Create measurement Document (IK11 in PM) when notification is created . For this in program IMRC0004 on exit i put FM SAVE_TEXT but its not working as it should.
BAPI_ALM_NOTIF_CREATE & BAPI_ALM_NOTIF_SAVE is used to create notification & in order to create text SAVE_TEXT is used.
But when the document is saved the specific text is not created. In debug the FM returns with no error.
Can anyone help me?Hi,
try to check the FM READ_TEXT by passing the same parameters used in SAVE_TEXT and check.whether read text is working.
if read text is workingthen save text is working.
and also see the parameter SAVEMODE_DIRECT import parameter in save_text if it is X it will save every tiome if it is space it will save at LUW(when Logical unit of work executes)
Prabhudas -
Unable to Create Website using "Create Web Site" action component in Release Management
Hi Team,
I am trying to use Release Management to Deploy my Website along with DB in staging servers.
I have set-up 2 Staging Servers SIT & UAT Both 2012 Servers with IIS 8.5 Configured.
Defined Release Path and Release template.
Deployment Sequence is something like this :
Deployment Sequence - Server Name - Create Folder - XCopy - Create Website - Configure Website
Build is successful, drops the output to Output folder and RM gets initiated with it's work.
It creates folders as mentioned in the "Create Folder" activity.
It copies the whole content from _PublishedWebsites to the mentioned location.
It gets stuck with the "Create Website" step.
Initially I have provided details as follows :
AppPoolName
IsPreloadEnabled
IsAutoStart
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Later, I tried providing
AppPoolName DefaultAppPool
IsPreloadEnabled 1
IsAutoStart 1
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Then also no luck.
Deployment gets rejected and the error that you can see when you hover the mouse is :
Task failed with the exit code -2146232576".
No much info available with this eror code in net also.
Any help in getting this simple site created is highly appreciated.
Thanking you in advance,
Regards,
TFS QueriesHi,
For the deployment sequence, you might need add the action of "create application pool" before creating a website.
Another method is check whether the build output can be deployed manually. If yes, then you can trobleshoot the problem in your deployment sequence and parameters. You can create the website manually and deploy your build output to the website. If you have
any other concerns about the deployment, you can also open a new thread in IIS forum for a better response.
If the issue persists, please elaborate more details about your scenario with sceenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to create Confirmations using Portal
Hi All,
When we are trying to create a Confirmation and trying to search for a particular PO the following error message is being shown
"No documents correspond to search criteria"
But all the POs the created in the backend.
Can anyone give a solution.
Regards,
Rahul.Check if you have enough auth. If you are using SRM, run BBP_GET_STATUS_2 once for the relevant SC and then try. Make sure the PO is open in backend.
Regards
TGB -
Unable to create file using java.io.File
I have attached my code
public boolean validateZip(MultipartFile file, List<String> files) throws Exception {
String fileName = file.getOriginalFilename();
File tempFile = new File("C://workspace//tempData//" + fileName);
LOG.info("Absolute path : " + tempFile.getAbsolutePath());
ZipFile zipFile = new ZipFile(tempFile);
LOG.info("No of enteries in the zip : " + zipFile.size());
//loop through the list and check if the entry is in the zip file
}The problem is, no exception is thrown in
' File tempFile = new File("C://workspace//tempData//" + fileName);
but, a FileNotFoundException is thrown in
ZipFile zipFile = new ZipFile(tempFile);Also, it specifies the Absolute Path, but when I check there, there is no file created.
Any help is appreciated.
TIAok, when I debug my application for the following code :
String dir = "C:\workspace";
String fileName = file.getOriginalFilename(); // file is an instance of a multipart file
File tempFile = new File(dir, fileName);
ZipFile zipFile = new ZipFile(tempFile);it runs smooth, no issues, if I run my app, the following line throws a FileNotFoundException...
ZipFile zipFile = new ZipFile(tempFile); -
Unable to create file using : =utl_file.fopen
Hi Team,
My issue is file is not getting created, i checked the permissions of the directory.
No error is received while executing the below script .
declare
f1 utl_file.file_type;
begin
f1:=utl_file.fopen('TAX_CODE_OUT_FILE_PATH','test.txt','W');
utl_file.put_line(f1,'memocan');
utl_file.fclose(f1);
end;
Any suggestion why file is not getting created ?i tried the following :
declare
V1 VARCHAR2(32767);
f1 utl_file.file_type;
begin
F1 := UTL_FILE.FOPEN('TAX_CODE_OUT_FILE_PATH','in.txt','R');
UTL_FILE.GET_LINE(F1,V1,32767);
UTL_FILE.FCLOSE(F1);
end;
Error is thrown as following ;
Error report:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 537
ORA-29283: invalid file operation
ORA-06512: at line 6
29283. 00000 - "invalid file operation"
*Cause: An attempt was made to read from a file or directory that does
not exist, or file or directory access was denied by the
operating system.
*Action: Verify file and directory access privileges on the file system,
and if reading, verify that the file exists.
Any suggestions ?? -
Unable to convert PO using ME59N
Hi,
I unable to create PO using ME59N,it show"No suitable purchase requisition found"
Below is the information:
PR type :NB,acc.assignment K,item category D
Source of supply is contract
PR and Contract already released
Vendor master - purchasing data - "Automatic PO" is ticked
It working fine for PR with acc assignment K and is there any special setting need to be done with item category D?
Thank youIs the #Automatic order allowed# indicator set with the purchase requisition for services in Customizing on client level and on the #Purchasing organization# level?
if you have problems with automatic PO creation, then see OSS Note 786303 - Analysis report RM06ME59 PReq check
It has a report ZRM06ME59 attached that helps you to find the problem -
Unable to create PDF from scanner
My office uses a Canon iR-Advance C5035. I previously had a computer that was running an older version of Windows (XP, I think) and Adobe Acrobat Standard (6, maybe), and I was able to create PDFs with the scan function on the Canon.
This year we bought a new computer that is running Windows 8. I just purchased and installed Acrobat Standard XI, but I am unable to create PDFs using the Canon scanner. I keep getting a "Either scanner driver is not installed or scanner is not connected." error. When I look at the "Custom scan" option, the Canon doesn't even seem to be detected. I'm not sure how to address this problem and any help would be much appreciated. Thank you!
-PaulLook under Control Panel>System>Hardware to see if the scanner appears. If not, then try Add Hardware (or whatever the option is in Win8) to install the driver (if available from Win8). If the cannon is on a network, you may have to go to additional steps to install it since the OS may not see it. The idea of looking for a new driver is also a good idea since Win8 (just like happened with Win7) is not shipped with a lot of the drivers.
-
Unable to create a pdf file using the print routine
Hey all,
Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver....
I have vista and cs3... Any thoughts?
Thanks,
Murph
[email address deleted by host]If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).
Maybe you are looking for
-
Importing MS Project file to CProjects
hi all, <b>how to import a MS Project file to CProjects.</b> please help me from scratch.... send any doc on that on [email protected] [email protected] full points all be awarded.. regards, niranjan
-
I have no idea what to do. It was going fine and then suddenly told me there was an error. What the heck do I do?
-
How To Use CS5 Perspective Tool
Does anyone know how to place jpgs using the perspective tool without converting it to a vector? The file is too large for the web. Any tips?
-
New update crashes Illustrator CC
The new update I installed this morning from CC crashes Illustrator repeatedly on start up - even with Verdana enabled as per the solution posted, can anyone help further? Thanks very much.
-
T500 hangs after standby/hi​bernate HELP There has to be many who have this issue
There has to be alot of people with this issue. It has happened now on every T500 we bought (5) and cannot figure out why. When the pc is dock or not - leave it alone, it goes to standby, come back and hit Cntrl/Alt/Del, desktop show up, no icons, m