Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

[svn] 3159: fix to target the correct player in the external library path for the packaged build file

Revision: 3159
Author: [email protected]
Date: 2008-09-09 12:53:37 -0700 (Tue, 09 Sep 2008)
Log Message:
fix to target the correct player in the external library path for the packaged build file
Modified Paths:
flex/sdk/trunk/frameworks/build_framework.xml

Hi Gaurang,
Were you able to resolve your issue?
Hope the following links help:
/message/7579461#7579461 [original link is broken]
Re: Required JAR files:
Regards,
Dao

For preparing the filenames and paths for the oracle database files..

Hi,
I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
Controlfile ---- > select name from v$controlfile;
Redologfile -- > select member from v$logfile;
Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
Tempfile --------> select tablespace_name,file_name from dba_temp_files;
Spfile -----------> show parameter spfile
Pfile --------------->
Passwordfile ---->
tnsnames.ora -->
listener.ora------>
sqlnet.ora ------>
oratab ------------->
Thanks
Shiju

orashiju wrote:
Hi,
I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
Controlfile ---- > select name from v$controlfile;
Redologfile -- > select member from v$logfile;
Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
Tempfile --------> select tablespace_name,file_name from dba_temp_files;
Spfile -----------> show parameter spfile
Pfile --------------->spfile and pfile are located under $ORACLE_HOME/dbs/
Passwordfile ----> passwordfile is located under $ORACLE_HOME/dbs
tnsnames.ora -->
listener.ora------>
sqlnet.ora ------>all above files are under $ORACLE_HOME/network/admin
oratab ------------->depends on operating system. Usualy under /etc/oratab

How do I set the default file path for the Place command?

I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
Thank you.

Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

Install MAX with only LabVIEW runtime engine

Hi,
I want to know if it is possible to install MAX from the Device Driver CD, when only LabVIEW RunTime engine is installed. There is no full installation of LabVIEW on that PC. That's MAX 3.1.1.3004 with LabVIEW RunTime Engine 7.1.
Patrick.

Dear Patrick,
The device driver CD usually does not have a single installation of MAX, but you can install MAX by installing most of the other drivers such as NI-DAQ, NI-488.2, NI-Serial, etc. MAX does not require LabVIEW, so you can have MAX and LabVIEW Run-Time without LabVIEW. Have a great day!
Sincerely,
Marni S.

Code signing cert error using Digicert - Unable to build a valid certificate chain for the signer

Steps to fix this error on code signing adobe air using .p12 cert from Digicert - Unable to build a valid certificate chain for the signer
a. Open Firefox and browse to https://www.digicert.com/digicert-root-certificates.htm
b. On the middle of the page, download -
DigiCert Assured ID Code Signing CA-1
Valid until: 10/Feb/2026
Serial #: 07:F4:73:6F:AF:EF:40:8A:1F:66:40:F2:65:D1:0A:C1
Thumbprint: B170A10819BEA936905D719E643399783E1F4567
Download
c. Install the cert in Firefox
d. Once done, export again the code signing cert from digicert, through (click Firefox -> Preferences -> View Certificates -> HIghlight the digicert code signing cert -> click Backup)
e. Done, the newly exported file should now have the valid certificate chain and that should fix the error "Unable to build a valid certificate chain for the signer"
Even though this is from Digicert, this should also work for other Certificate Authority providers assuming you download your provider's root cert for code signing.
Regards,
Reigner S. Yrastorza

Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
If you are using RoboHelp, which version?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Adobe Air Apps for OS X: Unable to build a valid certificate chain for the signer. // Code Signing on OS X 10.10 Yosemite

Hi,
I created several OS X Apps using Adobe Air. That worked quite well before. Now I have do update my OS X Apps - therefore I also needed update my certificates. [ I'm using Flash CC 2014 on OS X Yosemite 10.10 ]. But whatever I do it doesn’t work anymore. I always get this Message saying:
Unable to build a valid certificate chain for the signer.
I googled a lot and the only "guide" I found is this post (from April 2013) about code singing - http://scottgaertner.com/code_signing/
I’m not used to deal with this kind of stuff (CA etc.) - so it's quite confusing to me.
Would anybody please be so kind and tell me what I have to do?
Is there any instruction from Adobe? (I didn't find one yet)
A step by step instruction for absolute dummies would be great!
Best regards and thank you in advance
Jan

Hi Mukesh,
I installed the Flash CC 2014 update and added some Certificates from Apple to my Keychain. Now EVERYTHING works fine again!! :-)
Thank you very much for the Update! :-) Good job!
Best regards
Jan

Unable to build a valid certificate chain for the signer

Updating an AIR application after a few years and needed a new signing certificate which I purchased from Comodo. Imported it successfully into Keychain Access and exported it as a pfx file. When I identified this certificate to Flash Builder it went all the way through the build process and then came up with the error "Unable to build a valid certificate chain for the signer".
I can see there was a discussion on this matter in October 2011 but this did not seem to answer my question as that guy was trying to use an Apple Dev Centre key rather than paying for one like I did.
TIA
David

In Keychain Access, command-click your Class 2/3 certificate, the CA's intermediate certificate, and the CA's root certificate before hitting export.
Short guide: Code Signing Certificates for Adobe Air in OS X

Error creating AIR file: Unable to build a valid certificate chain for the signer.

Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steve

To manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

How can I specify an area path for the work item created on build failure?

In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
can see the root project node.
When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
Guenter

Hi Cuenter,
Thanks for your post.
You should set the value like below in that activity:
New
Dictionary(Of
String,
String)
From {{"Area
Path",
"teamprojectname\areaname"}}
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Failed to get root path for 'UED'

Good afternoon.
I have a problem with my IDES installation in University.
After a server reboot, MAXDB doesn't want to give up.
This is the log:
$ tail startdb.log
Error! Connection failed to node dolphin for database UED: database not found
Opening Database...
Failed to get root path for 'UED'
Error! Connection failed to node dolphin for database UED: database not found
Fri Aug 24 17:11:11 CEST 2007
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
If I try to run dbmcli manually, I receive the same error:
$dbmcli -u control,****** -d UED
Failed to get root path for 'UED'
Error! Connection failed to node (local) for database UED: database not found
Any suggestions??
Regards,
Luca

Hi Markus,
I think that my problem is not completely solved.
In fact, now the IDES system is on , but I'm not able to login into it.
When I select UED system on menu of my JAVA GUI and press "connect button", I can't access to SAP login window. (see )
I'm sure that is not a "network problem" of my laptop. (the problem persist also with others SAPGUI).
I've tried to <b>reboot</b> the server, but the situation is always the same. No way to access into the system, popup "connecting" reman.
If I try to see process that are running in the server, via "top -u uedadm" command, this is the situation:
3791 uedadm    16   0 87988 9768 1996 S    0 0.2   0:00.00 sapstartsrv
4775 uedadm    15   0 54664 1580 904 S    0 0.0   0:00.04 csh
4911 uedadm    16   0 54664 1604 920 S    0 0.0   0:00.05 csh
5388 uedadm    20   0 26788 1896 1064 S    0 0.0   0:00.04 sapstart
5408 uedadm    16   0 35736 5748 3024 S    0 0.1   0:00.06 ms.sapUED_DVEBM
5409 uedadm    16   0 4480m 100m 86m S    0 2.5   0:00.95 UED_00_DP
5410 uedadm    16   0 27528 2988 2224 S    0 0.1   0:00.05 co.sapUED_DVEBM
5411 uedadm    16   0 27488 2952 2216 S    0 0.1   0:00.04 se.sapUED_DVEBM
5412 uedadm    18   0 17620 2432 1800 S    0 0.1   0:00.01 ig.sapUED_DVEBM
5413 uedadm    16   0 210m 12m 3352 S    0 0.3   0:00.20 igsmux_mt
5414 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.16 igspw_mt
5415 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.19 igspw_mt
5430 uedadm    15   0 188m 8296 5972 S    0 0.2   0:00.05 gwrd
5431 uedadm    18   0 164m 4376 2844 S    0 0.1   0:00.63 icman
5432 uedadm    17   0 4486m 22m 7988 S    0 0.6   0:00.01 UED_00_DIA_W0
5433 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W1
5434 uedadm    16   0 5201m 79m 63m S    0 2.0   0:00.82 UED_00_DIA_W2
5435 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W3
5436 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W4
5437 uedadm    16   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W5
5438 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W6
5439 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W7
5440 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_DIA_W8
5441 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W9
5442 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W10
5443 uedadm    17   0 4486m 22m 7984 S    0 0.6   0:00.01 UED_00_DIA_W11
5444 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.02 UED_00_UPD_W12
5445 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.01 UED_00_UPD_W13
5446 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_UPD_W14
5447 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_ENQ_W15
5448 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_BTC_W16
5449 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_BTC_W17
5450 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_BTC_W18
I think that is not a performance problem of server, because
"free -m" command
                   total       used       free     shared    buffers     cached
Mem:          3946       2249       1697          0         50        950
-/+ buffers/cache:       1247       2699
Swap:         8001          0          8001
Can you please me, give some suggestions?
Thank you very much.

Installing GroupWise 2012 for the first time

Hello,
I am looking for some help on installing GroupWise 2012 for the first time, and onto a brand new Windows 2008 Server. I have looked at some of the documentation for this, but I do not fully understand what I need to do. For example, I need to have eDirectory installed so I installed eDirectory on the Windows sever. I don't know what settings I need to use for eDirectory or if I even need a Netware server, too. I would appreciate it if someone could walk me through this step by step and provide me with values for a basic system I would appreciate it. My first goal is to learn how to install GroupWise 2012 on a Windows 2008 server. Once I understand this, then I can redo it and go from there.
Thank you for your help.
John

Hi John,
Let me see if I can be of some sort of assistance.... you don't need a NetWare server - besides they are obsolete.
I created the following set of instructions for somebody doing a first time install on Linux - perhaps just read around it and see if it works for you in a windows environment:
"on the server run the GroupWise install: ./install from the directory where you have the software
select "Create or Update a GroupWise System"
accept the license agreement
create the software distribution directory (default should be fine)
From the Select Software dialog select the Select All button
when the copying is complet select Creating a new GroupWise System
to start ConsoleOne select Run
when prompted with the Linux Mount Directory select OK
when prompted, take note of the steps yout ake to create a new system, then select OK
login to consoleone with your admin credentials
in the left pane select GroupWise System the select Tools | GroupWise Utilities | New System
select next
confirm that your tree is correct
select Extend eDirectory Schema check box and then select next
When prompted for a system name enter something simple like GWise
When prompted for a primary domain name enter a domain like gwdom1 (I'm keeping it generic in this scenario)
when prompted for a domain directory enter a path ie /opt/novell/groupwise/dbs/gwdom1
select next
Next to the domain context fields select the browse icon
browse to and select the container that will hold the domain (you might want to create an organisational unit called groupwise in your tree for this purpose)
next slect your language and time zone
when prompted for a post office name enter a poa name like gwpoa1 (again, generic in this example)
when prompted for a post office directory enter a path eg /opt/novell/groupwise/dbs/gwpoa1
the context for the post office is assumed to be the same as the domain
select the language and time zone for the post office
in the post office link dialog confirm that tcp/ip is selected
enter your ip address of your server
leave the ports at default - don't mess with these unless you know what you are doing!
in the IP address of the MTA (that would be your domain) enter the IP of your server
leave the ports at default
browse and add existing edirectory users to your GroupWise system
to create the GroupWise system select next
view the installation summary then select next
the final step is to install the agent software - select next
from the GroupWise agents configuration dialog select next
confirm that the check box for Launch GroupWise AGents on system startup is selected then select exit
exit the GroupWise installation program
from the terminal winodws enter rcgrpwise start to load the groupwise agents"
Good luck
Cheers,

Trying to install creative cloud for the first time and getting error code:1

im trying to install creative cloud for the first time but im getting a error code:1
what can I do?

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Unable to process downpayment request (F-47) for the vendor with the PO

Hi All,
We are not able to process the advance payment request for the vendor 450004398 with the PO 3000086605 due to below mentioned error
" You cannot use this transaction type to post this asset.u201D After getting error we double click that error we got these full information.
The traanction type entered type entered belongs to transaction type group 15, According to the specifications for this transactipn type group,posting with trasnction types belonging to this group are only allowed in specifi asset classes ( for asset classes for asset under construction)
The asset to which you are posting belongs to class group
Above error we are facing, we checked "OAYB" also that asset class in maintained in that transaction code.
Awaiting for your reply
Thanks
Ram
09769004602

Hi Ram,
Please check AO90 and OAYB
In AO90 you should assign one Asset GL Account.
for this: go to AO90 select you chart of accounts and double click on acocunt Determination select your asset determination against which asset you are paying down payment and double click on Balance sheet accounts there you need to assign under acquisition account assginment * Acquisition:Down Payment* and Down Payment clearing Account. This is only for AUC.
In OAYB select 15 Down payment and double click on specification of asset class there you need assign your asset class.
Hope this will help you.
Regards,
Schilukuri

Unable to determine the install root path for the LabVIEW Runtime Engine

Similar Messages

Maybe you are looking for