"Unable to establish server mode." When connecting to MSMDPUMP.DLL using SSL

 SQL Server Developer's edition 2014
This is the same issue as was reported with 2012 but there is no service pack to fix it. 
See link:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e0d6937-00b9-44f8-a08b-f8305b0e2045/unable-to-connect-to-sql-server-2012-analysis-services-from-management-studio?forum=sqlanalysisservices
Message details:
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SupportedServers.IsIMBIServer(SqlOlapConnectionInfoBase connectionInfo)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SupportedServers.GetHierarchyBuilder(SqlOlapConnectionInfoBase connectionInfo)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetObjectBuilder(SqlOlapConnectionInfoBase ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.BuildDataModel(SqlOlapConnectionInfoBase ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetHierarchy(SqlOlapConnectionInfoBase ci, String displayName)
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ConnectToServer(UIConnectionInfo connectionInfo, IDbConnection liveConnection, Boolean validateConnection)

Hi Dqzz,
According to your description, you encounter the "Unable to establish server mode" error. Right?
In Analysis Services, this issue has been reported and it has been fixed in the later services pack. Please see: SSMS
raises "Unable to establish server mode" error if SSAS encounters errors during startup. However, it also can be related to running out of memory issue which will cause this error. Please refer to a blog below:
https://cwebbbi.wordpress.com/2012/05/28/unable-to-establish-server-mode-error-in-ssms/
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Similar Messages

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • URGENT - INTERNAL SERVER ERROR when connecting to site

    i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
    i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
    the error_log file contained the following :-
    [Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
    age
    [Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
    sItWorking
    [Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
    [Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
    ,same messages continue for different
    ,process ids followed by
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Attempt to free unreferenced scalar.
    Attempt to free unreferenced scalar.
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
    [Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
    e
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
    [Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
    e
    Any ideas or suggestions anyone ....??
    what could have possibly changed since yesterday to effect the site ??
    any help would be greatly appreciated ...
    null

    A couple of questions:
    1) Did you try shutting down apache with the sript?
    2) When killing the httpd processes did you also kill the associated java processes?
    null

  • TS3988 I get an unable to contact server error when i try to sign in..I don't see where there are outages.

    I get an unable to contact server error when i try to sign in..I don't see where there are outages.

    I am also having this problem.
    I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error.

  • My phone is stuck in recovery mode-when connected to itunes I get 1611 error code

    my phone is stuck in recovery mode-when connected to itunes I get 1611 error code

    Please see the  More Like This  section on the right.

  • Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my macbook Pro.

    Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my Macbook Pro.  I have turned off Bluetooth ( which was not an issue previously), uninstalled Chrome, again not an issue before I upgraded, and have not seen any improvement.
    I was using an older OS system (Snow Leopard) on my 2010 Macbook Pro.  I am wondering now if the upgrade was an unwise move?

    jbuckworth,
    which apps do you run under battery power? Are any of them identified as “apps using significant energy” when you click on the battery icon in the menu bar? If you have a 15-inch or 17-inch model, are your apps using the discrete GPU (which consumes more power than the integrated GPU)?
    How many charge cycles has your battery accumulated?
    How long have you had Mavericks installed? Is Spotlight still reïndexing your boot drive? (It does that whenever your OS is upgraded, because so many files change in an OS upgrade.)

  • All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

    HP staff  help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack.  The Firmware is PNP1CN1521AR. On August 1, 2015,  I purchased an HP all-in-one 6830  printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter  sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally  after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
    There seems to be a  6830 printer firmware or hardware problem causing this. HP  should be able to confirm this problem on 6830 easily.
    Please advise ASAP.
    Thanks 

    It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
    The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
    I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

  • OBI Server issue when connecting to SQLSERVER2008

    We have OBI server running on Solaris OS. And using Data Direct ODBC driver to connect to SQLServer 2008. We have tested DB connection from sql prompt on solaris by executing sql stmt and it is working fine. But when we try to see the table data from RPD Administration tool, it is throwing error like "statement cannot be prepared. syntax error.." But the same RPD is working fine with OBI server on windows platform. Not sure whether we need to do any changes in odbc configuration settings or something else. please suggest any fix for this.
    Thanks

    1) Can you post the full and actual errors that you're getting please
    2) What's the SQL Prompt on Solaris that you're using to test the connection?
    3) Have you tried enabling ODBC logging to get more details of the problem?

  • My ipod is stuck in disk mode when connected to computer.

    Hello, my iPod is stuck in disk mode when I connect it to my computer. iTunes will not recognize the device is connected, but it still shows up in my computer. When I restart the iPod, it tells me to go to iTunes to restore, then immediately shuts off. How can I restore it?

    Please see the  More Like This  section on the right.

  • Is there any way to config iws6.0 to connect to LDAP directory using SSL client and server authentication.  Only SSL server authentication worked when I tried.

    As my previous question, I followed the following instructions to setup up connection between iws and an LDAP server.
    "Using SSL to Communicate with LDAP
    You should require your Administration Server to communicate with LDAP using SSL. To enable SSL on your Administration Server, perform the following steps:
    1.Access the Administration Server and choose the Global Settings tab.
    2.Click the Configure Directory Service link.
    3.Select Yes to use Secure Sockets Layer (SSL) for connections.
    4.Click Save Changes.
    5.Click OK to change your port to the standard port for LDAP over SSL. "
    Q1. Any other steps needed to setup client authentication (or mutual authentication)?
    Q2. Do I need to enable security for connection groups in order to have this setup to work?

    Check out:
    http://docs.iplanet.com/docs/manuals/enterprise/60sp1/ag/esecurty.htm#1008113
    You will need to turn on Client Auth as described above. Hope it helps.

  • Linked Servers - Sql server 2005 to connect to Oracle 11g using ldap.ora instead of tnsnames.ora

    We have a SQL Server 2005 64bit box that needs a linked server created to Oracle 11g 64bit box. I have all the Oracle client software installed and can successfully connect to the Oracle database using SQL+ on the SQL Server 2005 64bit box. When I create
    the linked server and select the OraOledb.Oracle provider, I get the TNSNames error. The Oracle server does not use tnsnames.ora it uses OLAP.ora to resolve. How do I get Linked server to stop trying to connect via TNSNames and use the OLAP.ora file instead?
    I can't find any articles for this specific issues. All Oracle examples tell you to use TNSNAMES. The Oracle server is not under my companies control so I can not force the vendor to use tnsnames instead of OLAP.

    Hi,
    Have you got a resolution?
    Thank you.

  • I use Java plugin to remote into work computer. It now freezes when connecting to the gateway using Firfox 4. Any suggestions?

    In Java 3.x I could use Firefox to remote into my company PC and do work. When I upgraded to version 4 it isn't working. I get to where the process is connecting to the gateway and it freezes. I see the Java app begin to run, get a message it's trying to connect to the gateway and then it just hangs.
    Safari and other browsers connect without issue, so I'm thinking there is something going on with the Java app and Firefox. I have the latest versions of both.

    I recommend reaching out to Citrix via their support system -
    http://www.citrix.com/products/receiver/resources-and-support.html
    The receiver app has a specific list of servers it's compatible with, if the server is not on the list the app won't work in OS X.
    http://support.citrix.com/servlet/KbServlet/download/28492-102-671726/Receiver%2 0for%20Mac%2011%204%20FAQ%20v1_1235.pdf
    Do you know what server you're connecting to?

  • I lost my iPhone 4 in Brussels last week. It was in airplane mode when lost. I also use a code to unlock the phone. The phone was off when lost. My question is: Can a person access my personal data on the phone?

    I lost my iPhone 4 in Brussels last week. It was in airplane mode when lost. I also had a code to unlock the phone. The phone was off when lost. My question is: Can a person access my personal data on the phone? Can they take the chip out and place it into another iPhone and access the personal info on the chip or is the personal data on the phone itself and could they put a new chip in and access the data?

    I have Find my iPhone App, but it says that it is offine.
    I've checked all week and it is offline.
    I clicked on erase iphone when phone accesses the internet on the Find my iPhone App.
    I just want to know how safe is my personal information that I have on that iPhone?

  • Why cannot I see my music on my iPod when connected to the pc, using Windows explorer

    I am having problems with seeing my iPod Classic in my Windows Explorer.... when connecting using the correct leads I can only see the non-essential directoris, my music is hidden and is shown as F1, F2, F3,etc......
    Please help as I wish to transfer the music to my netbook...
    Thanks

    Those F1, F2, etc., folders are the ones containing your actual music.  If you copy these over to your Desktop and then into iTunes most of your track tags should still be with associated with the correct tracks in these folders.  Some may not.
    B-rock

  • Computer freezes in lid-closed mode when connected to external display

    I have a Sylvania SC190 CRT display connected to my Powerbook via a VGA to DVI adapter. Every time I put the computer in lid-closed mode and try to run it off of just the SC190, after a few minutes it freezes up and I have to hard restart it(hold power button down).
    Now, a few days ago, my powerbook stopped recognizing the display as an SC190, and just recognized it as a VGA Display. Don't know if this is relevant, as I have never used lid-closed mode before.
    Does anyone know what the problem is, and/or what I can do about it?
    Thank you.
    PowerBook 15" G4 1.67 GHz   Mac OS X (10.4.8)   512MB, 80GB, SD-DL

    I have the exact same problem.
    Here's my story:
    To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
    I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
    I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
    I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
    I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
    Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

Maybe you are looking for