Unable to execute xsql files

Hello,
I am not able to display the XML document from helloworld.xsql. The web server displays the document has is in IE 5.0. I am using the JRun for servlets along with personal web server. I have configured all the calsspath. The only thing I am unsure is configuration of oracle.xml.xsql.XSQLServlet.
Where should it be configured in Jrun?
Any help would be appreciated.
Thanks,
RP
null

Hi Ozawa,
Thanks for yr reply. I have set the mapping & the aliases as u have mentioned. Also I have the classpath in JRUN set to all the files given below. But I cannot still display the XML document. I have also given below the modified XSQLConfig.xml file. As u can tell I am using MS-access DB.
I tested by putting the file (helloworld.xsql) both within the root directory of my web server & servlet directory, without any results.
Can anybody out there or Ozawa please help me out with this.
Thanks in advance,
RP
C:\OracleXSQL/xsql/lib;
C:\OracleXSQL/xsql/lib/oraclexsql.jar
C:\OracleXSQL/xsql/lib/classes111.zip;
C:\OracleXSQL/xsql/lib/xmlparserv2.jar;
C:\OracleXSQL/xsql/lib/oraclexmlsql.jar;
C:\OracleXSQL/xsql/lib/XSQLConfig.xml;
XSQLConfig.xml file:
<?xml version="1.0" ?>
<XSQLConfig>
<connectiondefs dumpallowed="no">
<connection name="demo">
<dburl>jdbc:odbc:@prog61.planet.net:Student</dburl>
<driver>sun.jdbc.odbc.JdbcOdbcDriver</driver>
</connection>
</connectiondefs>
<actiondefs>
<action>
<elementname>param</elementname>
<handlerclass>oracle.xml.xsql.actions.ExampleGetParameterHandler</handlerclass>
</action>
<action>
<elementname>current-date</elementname>
<handlerclass>oracle.xml.xsql.actions.ExampleCurrentDBDateHandler</handlerclass>
</action>
</actiondefs>
</XSQLConfig>
null

Similar Messages

Unable to execute JAR files

I am unable to execute jar files and applets. Also, the Java Web Start and the Java Plugin Control Panel will not load. I have unloaded the JRE and installed other versions. To date I have loaded and unloaded the following:
1.4.1
1.4.2_01, _02, _04
1.4.2_04 SDK
But no change in the outcome.
The javaw application starts but does not load the jar file.
The applets and jar files run fine on other computers with any of those JRE/SDK's installed.
Any suggestions would be helpful.

Command line
To create a JAR file >jar cvf filename.jar filename.class(s)
To view the contents of a JAR file >jar tvf filename.jar
To extract the contents of a JAR file >jar xf filename.jar
To extract specific files from a JAR file >jar xf filename.jar archived-file(s)
To run an application packaged as a JAR file
>jar xvf filename.jar META-INF/MANIFEST.MF
The above will place META-INF/MANIFEST.MF file in your working directory. Open this file in text editor. Under Version, type in
Main-Class: filename
example;
Manifest-Version: 1.0
Main-Class: SelectPurchase
Created-By: 1.3.0 (Sun Microsystems Inc.)
save file
update META-INF/MANIFEST.MF file in jar file with;
jar umf META-INF/MANIFEST.MF filename.jarto run jar file from command line;
java -jar filename.jarTo run an application packaged as a JAR file
(version 1.1) jre -cp app.jar MainClass
(version 1.2 -- requires Main-Class
manifest header)
To invoke an applet packaged as a JAR file <applet code=AppletClassName.class
archive="JarFileName.jar"
width=width height=height>
</applet>
Does anyone know how to get the application to run by clicking on a Desktop Icon?

Unable to execute a file which is shown to exist by ls

Like I said, ls reports the file as existing, colors the filename green showing it's an executable, which was confirmed by `ls -l`. Normal file manipulation such as rm, mv, cp, etc all seem to work. Bash can not execute the file, reporting it as non-existant, and sh can't execute it either.
It might be a permissions issue but I doubt it, the file's permissions are as follows: All can read, only the owner can execute, write, AND read.
The file along with the others in the directory were extracted from a zip archive by the latest version of unzip (as pulled from the arch repos).
Last edited by eulallia1 (2009-07-01 13:08:38)

mcmillan wrote:gconf isn't a library file. It should probably work using the 64bit version of it, so pacman -S gconf
Oh, thank you. I'm not entirely used to linux yet, even though I've used it for months.
Well I'm having a different issue now at the moment. lib32-nss is installed but chrome is reporting an error stating that it's elf-class is ELFCLASS64, so the library is 64-bit. Where do I find the 32-bit nss Library (locally, as lib32-nss was installed by pacman)? At first, chrome threw an error because it couldn't find libnss3.so.1d, so I copied libnss3.so as libnss3.so.ld.
(Edit)
I fixed that issue.
Chrome is now throwing an error before execution (before it was because it couldn't handle the 64-bit libraries so I had to copy the 32-bit versions from /opt/lib32/), about libgconf-2.so.4, because it is 64-bit. This may sound like a repeat of the issue before but it truly is not. This time, due to ambiguous naming conventions I can not replace the library it is complaining about because it is in a sense, a necessity. Things could quite easily go wrong if I replaced it with a 32-bit library just to satiate chrome.
In short, Is there some prefix path variable or something, thus eliminating chrome's constant checks of /usr/lib and instead redirecting them to /opt/lib32?
Because I believe I've heard of a variable which contains colon separated library directories for applications to check through but I can't remember what it was called, just that it was a part of ldconfig.
Finally, (hopefully after this question and the prior question, there won't be anymore ),
is there a way to install a 32-bit version of libdbus-glib? E.g., using make to compile a 32-bit version. (Edit: Compiling the latest dbus-glib doesn't work, as online forums seem to say that a 32-bit version 'libc9' (ubuntu forums) is necessary. Glibc is installed in both 32-bit and 64-bit versions on this system)
Last edited by eulallia1 (2009-07-01 17:33:59)

I am unable to execute swf file present in server on local machine.

Hi all,
    I am a newbie to Flash and ActionScript 3.0 platform. I don't know whether this is the correct place to post this kind of queries/problems/issues here. Till now, I had posted only basic flash issues here in this forum. I feel this is the most powerful issue which created head-ache to me till now. I spent nearly 4 hours working with this issue. But, I don't find any solution even in google.
    I have created a swf file, which when gets executed, gets data from backend database and displays as items in Combo-box. In swf file, if we select an item from Combo-box, collects data from database and gets back to flash and displays them as items in Combo-box. Each item has a specific image(.jpg file)associated,which gets displayed on stage of flash file(.swf file) upon selected from combo-box.
    I am calling/invoking the flash file, When I click on a Button/select a tab created within my Java application.But,when the button gets clicked/tab gets selected, Combo-box is visible in flash file, but with no elements when we try to click upon it and the following error is getting displayed in a dialog-box:
Title of the error is: An action-script error has occured.
The error messsage is:
Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: http://localhost:8888/com.mymdworld.Application/DynaAccess.swf cannot load data from http://www.example.com:8080/servlet/getviews.
          at DynaAccess_fla::MainTimeline/DynaAccess_fla::frame1()
Also, the dialog-box contains two buttons namely, "Dismiss All" & "Continue" buttons.
Please, I request anyone to help me regarding this.
Actually, What is going on internaly? & Why for is this error?
Please, spend 2 minutes of your valuable time in filling the reply to this thread.
I will be waiting for your replies...
Thanks in advance...
Srihari.Ch

http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html
Check the docs and google "crossdomain policy"

Unable to Execute Class File

Dear All,
I am Using JDK1.3 in Microsoft Windows 2003 sever.
I had Created a test program as follows, Which is Saved in the BIN directory Named t.Java
class t
public static void main (String arg[])
{ System.out.println ("Test Prorgram "); }
When I compile the above Code it Compiled Successfully.
But, When I try to execute the class
It reports the ClassNoDefFoundException.
It had Try the following Set Classpath = C:\jdk1.3\bin; command, still I have the same problem.
How can I Execute the Class File.?

Run it like this:
java -classpath . tSome useful resource:
Java's code conventions: [http://java.sun.com/docs/codeconv/]
What is the classpath really: [http://en.wikipedia.org/wiki/Classpath_(Java)]
Also, Java 1.3 is really old. I recommend to download and install Java 1.5 or 1.6.

Unable to execute sh file from java file on the solaris

hi all
i have written a java program through which i want to shutdown the weblogic server on the solaris.
I have written following code
static Runtime objruntime = null;
objruntime = Runtime.getRuntime();
Process objprocess=null;
String url = "/home/xxx/xxx/xxxx/xxxxx/stopWebLogic.sh";
try {
               objprocess = objruntime.exec(url);
               objprocess.destroy();
               System.out.println("Server shutdown OK..");
          } catch (Exception e) {
     System.out.println("Error executing Cedera Server shutdown." + e);
I am able to execute the above code on the linux 7.1 means server get shutdown forcefully.
But when i am trying to execute above code on solaris, server is not getting shutdown.
Can anybody please help to solve this problem.
Thanks in advance
regards
andy

we didn't got what you are trying to say..
what i want to achieve is...
we are having one condition check in Startup class if that condition becomes false we have to stop the weblogic from starting up.
if we execute same command posted previously from shell directly its' working fine.
we are using "csh" shell. we have also tried to execute the command as follows - " csh /home/xxxx/xxx/xxx/xxxxx/stopWebLogic.sh"
but no achievement.
it seems that "objruntime.exec(url);" is not able to invoke the shell script "stopWebLogic.sh". We have also checked the execute permission for the same.
Neither we are getting any error nor any message.
can u please give us some guide lines on how to achieve this.

Text Message: Unable to execute file for security ...

Whenever I'm viewing a text message, when I try to open up the "Options" menu, I see the above message, "Text Message: Unable to execute file for security reasons". This doesn't seem to impact the functionality of the menu at all, everything seems to work.
Anyone ever come across this before?
I've updated the phone (Nokia E66) to the latest software, and I've only got one application installed other than the default base install (Google calendar sync utility), removing that doesn't change the problem.
Thanks in advance!

I get the same error after SW update to latest version when I try to run some apps

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

Unable to create an executable jar file

Hi,
I am unable to create an executable jar file,
I am using the command as follows:
C\> jar cvfm MyJarName.jar manifest.txt Demo.class
where as Demo.class has appropriate main method; manifest.txt contains [ Main-Class: Demo ] and a new line
Please help.
thanks & regards
M K Rayapudi
Edited by: R6i on Apr 30, 2009 5:15 AM

Your jar is perfectly generated, but your machine has a problem with .jar file associations.
You have two options:
1. Play with the registry. Dangereous if you are not used to.
2. Reinstall the jre.
Just to verify my theory, open a command prompt and the command:
reg query HKCR\jarfile\shell\open\command
What does it say? I have executed your command , here is the output
HKEY_CLASSES_ROOT\jarfile\shell\open\command
(Default) REG_SZ "C:\Program Files\Java\jre6\bin\javaw.exe" -jar "%1" %*I am not getting anything from this command, can you please explain clearly.
thanks & regards
M K Rayapudi
Edited by: R6i on May 3, 2009 10:18 PM

Unable to execute a binary file

I'm trying to run a server following the official instructions (http://www.ventrilo.com/setup.php#Server_Installing), but when I try to execute the binary i get this:
[srv@srv ventsrv]$ ./ventrilo_srv
bash: ./ventrilo_srv: No such file or directory
[srv@srv ventsrv]$
The permissions seem to be in order
[srv@srv ventsrv]$ ls -al
total 596
drwxr-xr-x 2 srv users 40 Nov 19 2008 .
drwx------ 3 srv users 4096 Apr 4 17:54 ..
-rw-r--r-- 1 srv users 14388 Nov 12 2007 LICENSE
-rwxr-x--x 1 srv users 468420 Nov 19 2008 ventrilo_srv
-rw-r--r-- 1 srv users 47244 Nov 12 2007 ventrilo_srv.htm
-rw-r----- 1 srv users 312 Nov 12 2007 ventrilo_srv.ini
-rwxr-x--- 1 srv users 55032 Nov 19 2008 ventrilo_status
[srv@srv ventsrv]$
I also tried using ". ventrilo_srv" instead, where I get:
[srv@srv ventsrv]$ . ventrilo_srv
bash: .: ventrilo_srv: cannot execute binary file
[srv@srv ventsrv]$
What's wrong?

error17 wrote:
Alright, thanks for the help all.
If ". <executable>" is wrong though, why did it say "cannot execute" and not just "command not found" as it usually does when one tries to use a non existent command?
is builtin bash command. Here is copypaste from man bash:
. filename [arguments]
source filename [arguments]
Read and execute commands from filename in the current shell environment and return the exit status of the last command executed from filename. If filename does not contain a slash, file names in PATH are used to find the directory containing filename. The file searched for in PATH need not be executable. When bash is not in posix mode, the current directory is searched if no file is found in PATH. If the sourcepath option to the shopt builtin command is turned off, the PATH is not searched. If any arguments are supplied, they become the positional parameters when filename is executed. Otherwise the positional parameters are unchanged. The return status is the status of the last command exited within the script (0 if no commands are executed), and false if filename is not found or cannot be read.

Unable to create Executable JAR file

Hi,
I tried to create Executable JAR file for
//JarTest.java
class JarTest
     public static void main( String args[] )
          System.out.println("i am EXECUTABLE JAR ");
mf is like
Manifest-Version: 1.0
Main-Class: JarTest
used jar cmf JarTest.mf exe.jar *.classIt created a jar file but i can't Execute the file
Help me
Thanks
AE

java is choosy about the actual manifest file format (line ending, trailing empty line, whatever).
This works for me with your example:
posman@proli:~/ivan/aa> cat mf
Manifest-Version: 1.0
Main-Class: JarTest
posman@proli:~/ivan/aa> od -cx mf
0000000   M   a   n   i   f   e   s   t   -   V   e   r   s   i   o   n
        614d 696e 6566 7473 562d 7265 6973 6e6f
0000020   :       1   .   0 \n   M   a   i   n   -   C   l   a   s   s
        203a 2e31 0a30 614d 6e69 432d 616c 7373
0000040   :       J   a   r   T   e   s   t \n \n \0
        203a 614a 5472 7365 0a74 000a

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to execute SDT request JAVA_EE during the JAVA---Input_adm_user_pwd

Dear Friends
I am stuck in CONFIGURATION PHASE of EHP5 Upgrade.
The ABAP phase has been completed but stuck in the Java processing INPUT_ADM_USER_PWD
"unable to execute the SDT request Java_EE operation configure on
hostname dbserver1 instance 02 Modules execution failed.
Execution of the unit PREPARE failed. Connection to the Upgrade Tool was closed."
TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Upgrade directory..: $(/JUMP/DIR/MAIN)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/ServiceInstance/BCCentralServicesInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
SAPJup version.....: $(/MAIN_VERSION)
Source release.....: $(/ER_CODE)
Target release.....: $(/J2EE/ShadowSystem/Version)
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....: $(/J2EE/StandardSystem/Usages/StrCurrentUsages)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
INPUT_ADM_USER_PWD
INIT
PREPARE
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
Regards
Anwer Waseem
Edited by: Anwer Waseem on Nov 9, 2011 11:48 PM

TROUBLE TICKET LOG
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
The execution of ended in error.
Could not perform operation on secure store. See previous messages.
Could not perform operation on secure store. See previous messages.
Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)*
its locating on drive e:\ which is wrong directory, the global directory are avaiable on drive S:\; this is the reasons that processing are ending with error.
Please advise how to resolve ASAP.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.util.secstore.SecureStoreException
Could not perform operation on secure store. See previous messages.
CHECK_PREPARE_UNIT
Regards
Anwer Waseem

Unable to execute xsql files

Similar Messages

Maybe you are looking for