Unable to extend tablespace while EhP4 upgrade

Hi Gurus,
We are doing EhP4 upgrade from EhP ready SR1. Our database version is DB6 9.7.2. We are using EhPI version 37.
In the chack phase the installer suggests to increase some tablspace size. But the tablespaces are in "Auto Storage Mode". We are unable to extend or add a container to it.
Any suggestions or workarounds for this issue?
Advance thanks.
Kind Regards,
Indrakumar

Thanks for all the replies.
SAP replied with the following workaround and it worked for us.
i)Save all files <upgdir>/bin/DBF.SPC and their content (for example by copying each of these files to DBF.SPC.SAV)
ii) Empty all files <upgdir>/bin/DBF*.SPC; that is do not delete/remove these files but delete all content, so that these files are completely empty!
iii) Make sure that you are having sufficient space in the file systems.
iv) Restart the upgrade/SPACECHK. with empty files there are no space requirements and thus the SPACECHK should finish successfully.
Kind Regards,
Indrakumar

Similar Messages

Reg: unable to extend tablespace error.

Hi,
On the database we work we got Unable to extend tablespace error. Suddenly in one night data was flooded into the tablespace.We have not run any precedure or On line reorganisation on that TS.
Is there any way that we can know what acivity had on that Tablespace during that night.We dont have audit option set in the database.
Thanks,
Venkat.

It really depends on what, exactly, you're looking for and what, exactly, happened.
If you have the archived log files from the night in question, that might tell you what statement generated a lot of redo. You'd miss certain unlogged operations, though, and that doesn't give you any information about what process caused the flood. If you've taken the basic precaution of getting base-line table sizes, querying DBA_SEGMENTS or DBA_EXTENTS to get the current size ought to show which tables have grown and is a lot less work than configuring Log Miner.
Log Miner would also tend to miss situations where a table allocated a new, rather large, extent.
Log Miner would tend to miss situations where an old manually allocated tablespace became fragmented
Justin

Request of one report fails with error: unable to extend tablespace

Hi All,
When I submit one request of report, the request end up with error:
unable to extend temp segment by 128 in tablespace XXXX
The request costs too much tablespace in short time, but the temp is about 20 G large.
The sever have been add storage recently, but I don't know whether it is related to the performance issue, because the request had not such issue.
How do I deal with it ?
Thanks,
Xinya

What report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion

Unable to extend tablespace.

Dear Guru's,
When i try to extend PSAPUNDO tablespace, faced the following error.
BR0370I Directory /oracle/WIQ/sapreorg/seekobzp created
BR0280I BRSPACE time stamp: 2010-10-25 16.53.22
BR0301E SQL error -1587 at location BrCtlCopy-1, SQL statement:
'/* BRSPACE */ ALTER DATABASE BACKUP CONTROLFILE TO '/oracle/WIQ/sapreorg/seekobzp/cntrlWIQ.old''
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
IBM AIX RISC System/6000 Error: 25: Not a typewriter
Additional information: 7
Additional information: 643
Additional information: 98304
BR0320E Copying of control file to /oracle/WIQ/sapreorg/seekobzp/cntrlWIQ.old failed
BR0280I BRSPACE time stamp: 2010-10-25 16.53.22
BR0700E Fatal errors occurred - terminating processing...
BR1020I Number of tablespaces processed: 0
BR1004E BRSPACE function 'tsextend' failed
BR1008I End of BRSPACE processing: seekobzp.tse 2010-10-25 16.53.22
BR0280I BRSPACE time stamp: 2010-10-25 16.53.22
BR1007I BRSPACE terminated with errors
Later on when i tried with any other tablespace, i get the following error.
Error log is as follows..
BR0280I BRSPACE time stamp: 2010-10-25 17.50.05
BR0370I Directory /oracle/WIQ/sapreorg/seekohac created
BR0280I BRSPACE time stamp: 2010-10-25 17.50.06
BR0301E SQL error -1587 at location BrCtlCopy-1, SQL statement:
'/* BRSPACE */ ALTER DATABASE BACKUP CONTROLFILE TO '/oracle/WIQ/sapreorg/seekohac/cntrlWIQ.old''
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
IBM AIX RISC System/6000 Error: 25: Not a typewriter
Additional information: 7
Additional information: 643
Additional information: 57344
BR0320E Copying of control file to /oracle/WIQ/sapreorg/seekohac/cntrlWIQ.old failed
BR0280I BRSPACE time stamp: 2010-10-25 17.50.06
BR0700E Fatal errors occurred - terminating processing...
BR1020I Number of tablespaces processed: 0
BR1004E BRSPACE function 'tsextend' failed
BR1008I End of BRSPACE processing: seekohac.tse 2010-10-25 17.50.06
BR0280I BRSPACE time stamp: 2010-10-25 17.50.06
BR1007I BRSPACE terminated with errors
Please help..

Hi,
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
IBM AIX RISC System/6000 Error: 25: Not a typewriter
OS release level ?
Oracle Release ?
Along with the above suggestions, Make sure that You have applied the required IBM AIX Fixes respective to OS release level ( as per SAP Note 977410) and required Oracle Intreme Patches/Patchset (as per SAP Note 980152).
Also an error ORA-27091: unable to queue I/O may points to low value of maxreqs parameter (asynchronous I/O parameter) as per [Oracle Metalink 559697.1|https://support.oracle.com:443/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocTitle=ORA-01115%20ORA-01110%20ORA-27091%20ORA-27072%20Error:%205:%20I/O%20error&bmDocDsrc=KB&bmDocType=PROBLEM&bmDocID=559697.1&viewingMode=1143))].
Regards,
Bhavik G. Shroff

Unable to extend table INFA_USER2.OPB_DTL_SWIDG_LOG by 128 in tblespce USER

Hi,
unable to extend tablespace error gettion
ORA-01653: unable to extend table INFA_USER2.OPB_DTL_SWIDG_LOG by 1024 in tablespace USERS
attempt:
ALTER DATABASE DATAFILE 'C:\app\vshadmin\oradata\orcl01\users01.dbf' AUTOEXTEND ON NEXT 1050m MAXSIZE UNLIMITED;
still getting same error
thanks

so you add a new datafile on USERS tablespace, give quota to the user on USERS tablespace correctly and get the same error.
show result of :
SET SERVEROUTPUT ON
SET PAGESIZE 1000
SET LINESIZE 255
SET FEEDBACK OFF
SELECT     d.status "Status",
   d.tablespace_name "Name",
   d.contents "Type",
   d.extent_management "Ext Man",
   TO_CHAR(NVL(a.bytes / 1024 / 1024, 0),'99,999,990.900') "Size (M)",
   TO_CHAR(NVL(a.bytes - NVL(f.bytes, 0), 0)/1024/1024,'99,999,999.999') "Used (M)",
   TO_CHAR(NVL((a.bytes - NVL(f.bytes, 0)) / a.bytes * 100, 0), '990.00') "Used %"
FROM       sys.dba_tablespaces d,
           (select
              tablespace_name,
              sum(bytes) bytes
            from dba_data_files
            group by tablespace_name) a,
           (select
              tablespace_name,
              sum(bytes) bytes
            from dba_free_space
            group by tablespace_name) f
WHERE      d.tablespace_name = a.tablespace_name(+)
AND        d.tablespace_name = f.tablespace_name(+)
   AND NOT
   (d.extent_management like 'LOCAL' AND d.contents like 'TEMPORARY')
UNION ALL
SELECT     d.status "Status",
   d.tablespace_name "Name",
   d.contents "Type",
   d.extent_management "Ext Man",
   TO_CHAR(NVL(a.bytes / 1024 / 1024, 0),'99,999,990.900') "Size (M)",
   TO_CHAR(NVL(t.bytes, 0)/1024/1024,'99,999,999.999') "Used (M)",
   TO_CHAR(NVL(t.bytes / a.bytes * 100, 0), '990.00') "Used %"
FROM       sys.dba_tablespaces d,
           (select
              tablespace_name,
              sum(bytes) bytes
            from dba_temp_files
            group by tablespace_name) a,
           (select
              tablespace_name,
              sum(bytes_cached) bytes
            from v$temp_extent_pool
            group by tablespace_name) t
WHERE      d.tablespace_name = a.tablespace_name(+)
AND        d.tablespace_name = t.tablespace_name(+)
AND        d.extent_management like 'LOCAL'
AND        d.contents like 'TEMPORARY'
ORDER BY "Name";
SET FEEDBACK ONand
select * from dba_role_privs where grantee='DATAWAREHOUSE';and
select * from dba_sys_privs where grantee='DATAWAREHOUSE';

OEM Upgrade - ORA-30036: unable to extend segment by 8 in undo tablespace

Oem upgrade Installer failed on repository in upgrading to grid Control 10.2.0.5
757921: ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDOTBS'
757922: ORA-06512: at line 117
I added two datafiles to fix this error so I thought I had enough space now - installer failed when upgrading the repository with ORA-30036 unable to extend segment by 8 in undo tablespace 'UNDOTBS', When I hit retry it keeps failing on the same error. The upgrade is in STATUS -3. Could I run this as sysman and then go back to the installer screen and retry again.
execute emd_maintenance.set_comp_status('_
UPGRADE_', EMD_MAINTENANCE.G_STATUS_
CONFIGURED_READY);
If you have any tips going forward pleases let me know.,
Joseph

Has anyone encountered this error: doing re-installation on OEM upgrade. I can seem to find anything on metallink. There is no error code
txnRemoveConfirmation .
Joseph

Unable to extend table SYS.VIEW$ by 256 in tablespace

Hi,
I am getting the error
"unable to extend table SYS.VIEW$ by 256 in tablespace "
and
"ORA-00604: error occurred at recursive SQL level 1
ORA-01654: unable to extend index SYS.I_DEPENDENCY1 by 256".
while upgrading.
My database contains only 600 MB free.
Is this the problem bcoz of the database size or ant other. i am unable to understand
If it is bcause of database,please let me know how to confirm.
Thanks.

ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.

Unable to extend table SYS.yyy_xx1$ by 8192 in tablespace SYSTEM

While trying to compile a package with lots of objects i am getting the below error message.
Oracle 11gr2
ORA-00604: error occurred at recursive SQL level 1
ORA-01653: unable to extend table SYS.yyy_xx1$ by 8192 in tablespace SYSTEM
00604. 00000 - "error occurred at recursive SQL level %s"
*Cause:    An error occurred while processing a recursive SQL statement
           (a statement applying to internal dictionary tables).
*Action:   If the situation described in the next error on the stack
           can be corrected, do so; otherwise contact Oracle Support.
How can i resolve the issue

Result of query
select -- file_name
     blocks
     , maxblocks
     , status
     , autoextensible
from dba_data_files
where tablespace_name = 'SYSTEM';
4194302
4194302
AVAILABLE
YES
4194302
4194302
AVAILABLE
YES
4194302
4194302
AVAILABLE
YES
262144
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
0
AVAILABLE
NO
524288
524288
AVAILABLE
YES
524288
524288
AVAILABLE
YES
518400
524288
AVAILABLE
YES
517120
524288
AVAILABLE
YES
655360
0
AVAILABLE
NO
655360
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO
262144
0
AVAILABLE
NO

Error while doing EHP4 upgrade

Hello Colleagues,
While doing EHP4 upgrade on windows 2008 server in extraction phase, i am getting following error message:
Unable to execute the SDT request ABAP operation extract on hostname inmumeucpi instance 00 Extraction of the ABAP upgrade request ABAP has failed Error from unit observer Tool connector failed with . Start of SAPup failed: OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail . OS process 'G:\EHPI\abap\bin\SAPehpi.exe' start failed. java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: Cannot run program "G:\EHPI\abap\bin\SAPehpi.exe" (in directory "G:\EHPI\abap\bin"): CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail java.io.IOException: CreateProcess error=14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
Please look into it ASAP.
Regards,
Nitin

> The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
This is caused by a missing security patch:
Note 1402510 - Resolving SideBySide Assembly Errors
which finally points to
Note 1375494 - SAP system does not start after applying SAP kernel patch
Install the security patch from that note.
Markus

Unable to extend temp segment by 128 in tablespace PSAPTEMP

Hi everybody!
While processing a UNICODE coversion with SAPINST on my SAP NW2004s system (AIX 5,2 - Oracle 10.2 - BW 7.0) into my.SAPDFACT_1.log file the following errors occured:
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "HBQ20080503070541                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "si088ss1                                                        "
(GSI) INFO: sysname = "AIX"
(GSI) INFO: nodename = "si088ss1"
(GSI) INFO: release = "2"
(GSI) INFO: version = "5"
(GSI) INFO: machine = "0031832B4C00"
(DB) INFO: /BIC/FZHPY_LIM created #20080503200234
(IMP) INFO: import of /BIC/FZHPY_LIM completed (133182692 rows) #20080503212420
DbSl Trace: Error 1652 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1652 occurred when executing SQL stmt (parse error offset=42)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "/BIC/FZHPY_LIM~0" ON "/BIC/FZHPY_LIM" ( "KEY_ZHPY_LIMP", "KEY_ZHPY_LIMT", "KEY_ZHPY_LIMU", "KEY_ZHPY_LIM2", "KEY_ZHPY_LIM3", "KEY_ZHPY_LIM4", "KEY_ZH
PY_LIM5", "KEY_ZHPY_LIM6", "KEY_ZHPY_LIM7" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1652)
error message returned by DbSl:
ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
(DB) INFO: disconnected from DB
Anybody can help me?
Thanks a lot!

Hi Stefan!
desc SAPSR3."/BIC/FZHPY_LIM";
Name                                      Null?    Type
KEY_ZHPY_LIMP                             NOT NULL NUMBER(10)
KEY_ZHPY_LIMT                             NOT NULL NUMBER(10)
KEY_ZHPY_LIMU                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM2                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM3                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM4                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM5                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM6                             NOT NULL NUMBER(10)
KEY_ZHPY_LIM7                             NOT NULL NUMBER(10)
/BIC/ZHCONTING                            NOT NULL NUMBER(17,2)
/BIC/ZHD_IMP                              NOT NULL NUMBER(17,2)
/BIC/ZHPERC2                              NOT NULL NUMBER(10)
SELECT AVG_ROW_LEN FROM ALL_TABLES WHERE TABLE_NAME = '/BIC/FZHPY_LIM';
AVG_ROW_LEN
SELECT BYTES, BLOCKS FROM DBA_SEGMENTS WHERE SEGMENT_NAME = '/BIC/FZHPY_LIM';
     BYTES     BLOCKS
7180648448     876544
SELECT FILE_NAME, TABLESPACE_NAME, BYTES, BLOCKS, AUTOEXTENSIBLE, MAXBYTES, MAXBLOCKS FROM DBA_TEMP_FILES;
FILE_NAME
TABLESPACE_NAME                     BYTES     BLOCKS AUT   MAXBYTES MAXBLOCKS
/oracle/HBQ/sapdata1/temp_1/temp.data1
PSAPTEMP                       1048576000     128000 YES 1.0486E+10    1280000
/oracle/HBQ/sapdata1/temp_1/temp2.data1
PSAPTEMP                        298844160      36480 YES 3.4359E+10    4194176
Thanks.

Unable to extend index name of the index by 8 in tablespace

Hello,
I am not a DBA and do not have much experience in Oracle. When I was trying to restore the backup of my application, I received the following error. I could not able to proceed further in my tasks.
ORA-01654: unable to extend index <name of the index> by 8 in tablespace <name of the Index tablespace>The following query was used to create the table space. Oracle version is 10g.
CREATE TABLESPACE TS_JIRA
DATAFILE 'D:\oracle\product\10.2.0\oradata\jiraadmi\TS_JIRA.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 10M MAXSIZE 200M
MINIMUM EXTENT 64K
DEFAULT STORAGE ( INITIAL 64K NEXT 64K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0);I do not know how to extend the size of the tablespace. Can anyone help to sort out this issue?
Thanks in advance
Ram

Hi Ram;
I suggest also review below doc for your future issue
TROUBLESHOOTING GUIDE (TSG) - UNABLE TO CREATE / EXTEND Errors [ID 1025288.6]
Overview Of ORA-01654: Unable To Extend Index %s.%s By %s In Tablespace %s [ID 146595.1]
OERR: ORA 1654 unable to extend index <name.name> by <num> for tablespace <nam [ID 19049.1]
I belive they will answer all your question ;)
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

ORA-01652: unable to extend temp segment by 128 in tablespace TEMP

Hi,
I am getting the following error while executing an insert query.
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP.
I have tried increasing the TEMP tbsp size it got resolved temporarily but occurred again after few days.
When the problem occured, following query shows all insert queries in TEMP tablespace and one of them consumes about 5GB and others are about 24MB.
SELECT S.sid || ',' || S.serial# sid_serial, S.username,
T.blocks * TBS.block_size / 1024 / 1024 mb_used, T.tablespace,
T.sqladdr address, Q.hash_value, Q.sql_text
FROM v$sort_usage T, v$session S, v$sqlarea Q, dba_tablespaces TBS
WHERE T.session_addr = S.saddr
AND T.sqladdr = Q.address (+)
AND T.tablespace = TBS.tablespace_name
ORDER BY S.sid;
The insert query is :
INSERT INTO SEOSDATA (ENTRYID,DOMAINNAME,USERNAME,EVENTTYPE,LOGNAME,TIMSTAMP,SOURCE,COMPUTERNAME,EVENTID,EVENTCATEGORY,SEARCHSTRINGS,MSGTEXT) VALUES (ENTRYID_SEQ.NEXTVAL,:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)
It is not expected that an insert query consumes such a huge memory.
Can someone help me in figuring out what the problem is.
What might have gone wrong? Seems like sorting is used, why an insert query uses sorting?
Regards
Ishu

Hi,
Insert statement should not use TEMP tablespace. Please check with following query which user and session id is using TEMP tablespace.
SELECT b.tablespace, b.segfile#, b.segblk#, b.blocks, a.sid, a.serial#,
a.username, a.osuser, a.status
FROM v$session a,v$sort_usage b
WHERE a.saddr = b.session_addr
ORDER BY b.tablespace, b.segfile#, b.segblk#, b.blocks;
Dilipkumar Patel.

ORA-01652: unable to extend temp segment by 8192 in tablespace CDR_TAB

Dear All,
While create index command
"create index idx_CALLED_NO on dbs(CALLED_NO) nologging"
an error occure
ORA-01652: unable to extend temp segment by 8192 in tablespace CDR_TAB
how to retify it.what is the command to add datafile or tablespace......
Using oracle 9i...
Thanks in advance

create tablespace or add index, that you can find out at http://tahiti.oracle.com
You should check space on CDR_TAB.
I think you can create new tablespace
http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_74a.htm#SQLRF01403
Create tablespace CDR_IND datafile 'xxx' ...After that create index
create index idx_CALLED_NO on dbs(CALLED_NO) nologging tablespace CDR_IND ;Good Luck;)

REG:ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM

Hi
My database is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I get the following error
ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
When query the dba_data_files system tablespace
TABLESPACE_NAME AUTOEXTENSIBLE FILE_NAME MAXBYTES/1024/1024/1024 BYTES/1024/1024/1024 SYSTEM YES DATA/maq1/datafile/system.260.709848331        31.9999847412109375     0.65447998046875                                                                                                                                                                                                                                                                                                                                                                                                                            SYSTEM                         NO             DATA200/maq1/datafile/system.310.729819887 0 0.9765625
2 rows selected
Please advice

Hello,
ORA-00604: error occurred at recursive SQL level 1 ORA-01653: unable to extend table SYS.OBJ$ by 128 in tablespace SYSTEM
TABLESPACE_NAME AUTOEXTENSIBLE FILE_NAME                                   MAXBYTES/1024/1024/1024 BYTES/1024/1024/1024
SYSTEM          YES            +DATA/maq1/datafile/system.260.709848331    31.9999847412109375      0.65447998046875
SYSTEM          NO             +DATA200/maq1/datafile/system.310.729819887 0                        0.9765625
If you have enough space on the Disk for the first Datafile to extend, it's a rather strange behaviour.
In this case, I suggest you to open a SR on My Oracle Support.
On Solaris, a similar bug was reported (in 9.2.0.8 release):
Bug 7196775: ERROR ORA-01653 OCCURS WHILE INSERTING RECORDS IN TABLE WITH DATAFILE AUTOEXTENDElse, you may try to extend manually the Datafiles so as to get enough free space inside the Tablespace SYSTEM.
Hope this help.
Best regards,
Jean-Valentin

ORA-01653: unable to extend table SYS.SOURCE$ by 64 in tablespace SYSTEM"

Hi,
While creating a package the , I got the following error.
"ORA-00604: error occurred at recursive SQL level 1
ORA-01653: unable to extend table SYS.SOURCE$ by 64 in tablespace SYSTEM"
Could anyone please explain, how to solve this problem.
Thank you,
Regards,
Gowtham Sen.

solution: increase the size of the system tablespace.
the text of all pl/sql objects is stored in the database by sys. packages, procedures, and functions are stored in sys.source$ (which is part of the USER_SOURCE view definition). so, you've created a lot of pl/sql, and the table wants to extend, but there isn't room.
this is a major problem, because it means that nothing in system can extend. add another datafile, or put the tablespace on autoextend.

Unable to extend tablespace while EhP4 upgrade

Similar Messages

Maybe you are looking for